Build the TPM frontend code that has been added so far.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-5-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch uses the possibility to add a vendor-specific register and
adds a debug register useful for dumping the TIS's internal state. This
register is only active in a debug build (#define DEBUG_TIS).
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-4-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the main code of the TPM frontend driver, the TPM TIS
interface, to QEMU. The code is largely based on the previous implementation
for Xen but has been significantly extended to meet the standard's
requirements, such as the support for changing of localities and all the
functionality of the available flags.
Communication with the backend (i.e., for Xen or the libtpms-based one)
is cleanly separated through an interface which the backend driver needs
to implement.
Whenever the frontend has collected a complete packet, it will submit
a task to the backend, which then starts processing the command. Once
the result has been returned, the backend invokes a callback function
(tpm_tis_receive_cb()).
Testing the proper functioning of the different flags and localities
cannot be done from user space when running in Linux for example, since
access to the address space of the TPM TIS interface is not possible. Also
the Linux driver itself does not exercise all functionality. So, for
testing there is a fairly extensive test suite as part of the SeaBIOS patches
since from within the BIOS one can have full access to all the TPM's registers.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-3-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch fixes unplugging a virtio-ccw device. We no
longer need to do that in virtio-ccw since common code does now
proper handling.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Add a vmstate_lm32_cpu referencing the previous VMStateDescription as a
sub-struct and hook it up to CPUClass::vmsd. Drop cpu_{save,load}().
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Enable ARMCPUInfo to specify a custom class_init functions.
Introduce arm_v7m_class_init() and use it for "cortex-m3" model.
Instead of forwarding from arm_cpu_do_interrupt() to do_interrupt_v7m(),
override CPUClass::do_interrupt with arm_v7m_cpu_do_interrupt()
in arm_v7m_class_init().
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move it to qom/cpu.c to avoid build failures depending on include order
of cpu-qom.h and exec/cpu-all.h.
Change opaques of various ..._irq_handler() functions to the
appropriate CPU type to facilitate using cpu_reset_interrupt().
Fix Coding Style issues while at it (missing braces, indentation).
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reindent, add missing braces and drop/adjust whitespace.
Prepares for CPUArchState-to-CPUState field movements in
cpu_cris_handle_mmu_fault(), do_interruptv10() and do_interrupt().
The remaining functions were so minor that they can be fixed in one go.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Expose vmstate_cpu as vmstate_x86_cpu and hook it up to CPUClass::vmsd.
Adapt opaques and VMState fields to X86CPU. Drop cpu_{save,load}().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This setter avoids redefining each VMStateDescription value to
vmstate_dummy by not referencing the value for CONFIG_USER_ONLY.
Suggested-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In comparison to DeviceClass::vmsd, CPU VMState is split in two,
"cpu_common" and "cpu", and uses cpu_index as instance_id instead of -1.
Therefore add a CPU-specific CPUClass::vmsd field.
Unlike the legacy CPUArchState registration, rather register CPUState.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
This avoids adding a duplicate stub for CONFIG_USER_ONLY.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
They are never changed once initialized, and moving them to the class
will allow to inspect them before instantiating.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Store legacy name in SuperHCPUClass for -cpu ? and for case-insensitive
class lookup.
List CPUs by iterating over TYPE_SUPERH_CPU subclasses.
Signed-off-by: Andreas Färber <afaerber@suse.de>
No functional change, just less usages of first_cpu and next_cpu fields.
env is passed to cpu_memory_rw_debug(), which in turn passes it to
target-specific cpu_get_phys_page_debug(). Changing both would be a
larger refactoring, so defer that by using env_ptr for now.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
No functional change, just a reduction of CPU loops.
The mon_cpu field is left untouched for now since changing that requires
a number of larger prerequisites, including cpu_synchronize_state() and
mon_get_cpu().
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 55e5c2850 breaks CPU not found return value, and returns
CPU corresponding to the last non NULL env.
Fix it by returning CPU only if env is not NULL, otherwise CPU is
not found and function should return NULL.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Hosts hold on to handles provided by guest-file-open for periods that can
span beyond the life of the qemu-ga process that issued them. Since these
are issued starting from 0 on every restart, we run the risk of issuing
duplicate handles after restarts/reboots.
As a result, users with a stale copy of these handles may end up
reading/writing corrupted data due to their existing handles effectively
being re-assigned to an unexpected file or offset.
We unfortunately do not issue handles as strings, but as integers, so a
solution such as using UUIDs can't be implemented without introducing a
new interface.
As a workaround, we fix this by implementing a persistent key-value store
that will be used to track the value of the last handle that was issued
across restarts/reboots to avoid issuing duplicates.
The store is automatically written to the same directory we currently
set via --statedir to track fsfreeze state, and so should be applicable
for stable releases where this flag is supported.
A follow-up can use this same store for handling fsfreeze state, but
that change is cosmetic and left out for now.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
* fixed guest_file_handle_add() return value from uint64_t to int64_t
We currently maintain a whitelist of commands that are safe during
fsfreeze. During fsfreeze, we disable all commands that aren't part of
that whitelist.
guest-sync-delimited meets the criteria for being whitelisted, and is
also required for qemu-ga clients that rely on guest-sync-delimited for
re-syncing the channel after a timeout.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
In commit 7868e26e59
("qemu-ga: add initial win32 support") support was added for qemu-ga on
Windows using virtio-serial. Other channel methods (ISA serial and UNIX
domain socket) are not supported on Windows.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch fixes a compiler warning when cross-build:
qga/service-win32.c: In function 'printf_win_error':
qga/service-win32.c:32:5: warning: format '%d' expects argument of type 'int',
but argument 3 has type 'DWORD' [-Wformat]
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
# By Paolo Bonzini (40) and others
# Via Juan Quintela
* quintela/migration.next: (46 commits)
page_cache: dup memory on insert
page_cache: fix memory leak
Fix cache_resize to keep old entry age
Fix page_cache leak in cache_resize
migration: inline migrate_fd_close
migration: eliminate s->migration_file
migration: move contents of migration_close to migrate_fd_cleanup
migration: move rate limiting to QEMUFile
migration: small changes around rate-limiting
migration: use qemu_ftell to compute bandwidth
migration: use QEMUFile for writing outgoing migration data
migration: use QEMUFile for migration channel lifetime
qemu-file: simplify and export qemu_ftell
qemu-file: add writable socket QEMUFile
qemu-file: check exit status when closing a pipe QEMUFile
qemu-file: fsync a writable stdio QEMUFile
migration: merge qemu_popen_cmd with qemu_popen
migration: use qemu_file_rate_limit consistently
migration: remove useless qemu_file_get_error check
migration: detect error before sleeping
...
A conflict was resolved the wrong way when merging commit 320ba5f (build:
always link device_tree.o into emulators if libfdt available, 2013-02-05).
This causes a build failure for the arm-softmmu target due to multiply
defined symbol.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1362997886-9470-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The nature of the kernel ABI for the get_robust_list and set_robust_list
syscalls means we cannot implement them in QEMU. Make get_robust_list
silently return ENOSYS rather than using the default "print message and
then fail ENOSYS" code path, in the same way we already do for
set_robust_list, and add a comment documenting why we do this.
This silences warnings which were being produced for emulating
even trivial programs like 'ls' in x86-64-on-x86-64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the accept4 syscall (which is identical to accept
but has an additional flags argument).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the sendfile and sendfile64 syscalls. This implementation
passes all the LTP test cases for these syscalls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If the guest passes us a bogus negative length for an iovec, fail
EINVAL rather than proceeding blindly forward. This fixes some of
the error cases tests for readv and writev in the LTP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The linux-user usage message attempts to line up the columns in
its table by calculating the maximum width of any item in them.
However for the 'Argument' column it was only accounting for the
length of the option switch (eg "-d"), not the additional example
text (eg "item[,...]"). This currently has no adverse effects
because the widest item in the column happens to be the argumentless
"-singlestep" option, but improving the "-d" option help to read
"-d item[,...]" exceeds that limit.
Fix this by correctly calculating maxarglen as the width of the
first column text including a possible option argument, and
adjusting its uses to match.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The page cache frees all data on finish, on resize and
if there is collision on insert. So it should be the caches
responsibility to dup the data that is stored in the cache.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
XBZRLE encoded migration introduced a MRU page cache
meachnism. Unfortunately, cached items where never freed in
case of a collision in the page cache on cache_insert().
This lead to out of memory conditions during XBZRLE migration
if the page cache was small and there where a lot of collisions
in the cache.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of using cache_insert do the update itself
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The indirection is useless now. Backends can open s->file directly.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
With this patch, the migration_file is not needed anymore.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rate limiting is now simply a byte counter; client call
qemu_file_rate_limit() manually to determine if they have to exit.
So it is possible and simple to move the functionality to QEMUFile.
This makes the remaining functionality of s->file redundant;
in the next patch we can remove it and write directly to s->migration_file.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch extracts a few small changes from the next patch, which
are unrelated to adding generic rate-limiting functionality to
QEMUFile. Make migration_set_rate_limit a simple accessor, and
use qemu_file_set_rate_limit consistently. Also fix a typo where
INT_MAX should have been SIZE_MAX.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Prepare for when s->bytes_xfer will be removed.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Second, drop the file descriptor indirection, and write directly to the
QEMUFile.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
