Do not allocate TCG-only resources like the translation buffer when
running over KVM or XEN. Saves a "few" bytes in the qemu address space
and is also conceptually cleaner.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The code which prints the debug usage message on '-d ?' for *-user
has to come before the check for "not enough arguments", so that
"qemu-foo -d ?" prints the list of possible debug log items rather than
the generic usage message. (This was inadvertently broken in commit
c235d73.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Avoid warnings like these by wrapping recv():
CC slirp/ip_icmp.o
/src/qemu/slirp/ip_icmp.c: In function 'icmp_receive':
/src/qemu/slirp/ip_icmp.c:418:5: error: passing argument 2 of 'recv' from incompatible pointer type [-Werror]
/usr/local/lib/gcc/i686-mingw32msvc/4.6.0/../../../../i686-mingw32msvc/include/winsock2.h:547:32: note: expected 'char *' but argument is of type 'struct icmp *'
Remove also casts used to avoid warnings.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The ia64 sys/ucontext.h defines macros 'uc_link', 'uc_sigmask' and
'uc_stack'. Rename the s390 target_ucontext struct members to tuc_*,
bringing them into line with the other targets and fixing a compile
failure on ia64 hosts caused by this clash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
MIPS uses similar calling convention than ARM eabi, where when using
64-bit values some registers are skipped. This patch makes MIPS and ARM
eabi share the argument reordering code.
This affects ftruncate64, creating insane sized fails (or just failing).
Cc: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As reported by Cédric VINCENT:
The syscall #123 on SH4 should be "TARGET_NR_cacheflush" instead of
"TARGET_NR_modify_ldt" [1]. The only consequence of this misnaming is
that many "Unsupported syscall" warnings are issued when emulating JIT
compilers.
Reported-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The codes for get/setrlimit differ between linux target platforms.
This patch adds conversion.
This is important else programs (rsyslog, python, ...) can go into a
near infinite loop trying to close all the file descriptors from 0 to
-1.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Byte swap was applied in the wrong order with testing for
RLIM_INFINITY. On mips bigendian from an amd64 system this results in
infinity being misinterpretted as 2^31-1.
This is a serious bug because it causes setrlimit stack size to kill
all child processes. This means (for example) that 'make' can run no
children. The mechanism of failure:
1. parent sets stack size rlimit to 'infinity'
2. qemu screws this value up
3. child process fetches stack size as a large (but non-infinite) value
4. qemu tries to allocate stack before execution
5. stack allocation fails (too big) and child process dies
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Dereferencing a null pointer causes an exception 0xC (EXCP_AdEL)
instead of EXCP_TLBL. This should also trigger a segfault.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Return -TARGET_ENOSYS instead of -ENOSYS from linux-user/main.c
* Caused strange 'Level 2 synchronization messages' instead of
correctly reporting the syscall was missing.
* Made glibc simply fail instead of using older syscalls
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
The syscall sigaltstack takes two parameters, not zero. This patch
should have no impact as only values above 4 influence the runtime
behaviour. Nevertheless, it is wrong.
Signed-off-by: Wesley W. Terpstra <terpstra@debian.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Enforce the same restriction on the size of the sigset passed to
pselect6 as the Linux kernel does. This is both correct and silences
a gcc 4.6 warning about a write-only variable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add syscall numbers for new syscall numbers; this brings us
into line with Linux 2.6.39.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch was validated with programs from DirectFB-1.0 and
WebKit/DirectFB.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
DirectFB-1.0 uses at least two of the four added ioctls, and the two
others were added for completeness. This patch was validated with the
program "vlock -all/-new".
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
As noticed while looking at "Bump do_syscall() up to 8 syscall arguments"
patch, sync_file_range uses a pad argument on 32bit mips. Deal with it
by reading the correct arguments when on mips.
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Remove fenab as it is only written, never used. Add a FIXME
comment about the discrepancy between our behaviour and that
of the Linux kernel for this routine.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Move the access of fpu_save into the commented out skeleton code for
restoring FPU registers on SPARC sigreturn, thus silencing a gcc
4.6 "variable set but never used" warning.
(This doesn't affect the calculation of 'err' because in fact
__get_user() can never fail.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
On 32 bit MIPS a few syscalls have 7 arguments, and so to call
them via NR_syscall the guest needs to be able to pass 8 arguments
to do_syscall(). Raise the number of arguments do_syscall() takes
accordingly.
This fixes some gcc 4.6 compiler warnings about arg7 and arg8
variables being set and never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Just unfold its definition in only use.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[peter.maydell@linaro.org: fixed typo in the debug code,
added parentheses to fix precedence issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Looking at the other architectures, we should be using "how" not "arg1".
Signed-off-by: Juan Quintela <quintela@redhat.com>
[peter.maydell@linaro.org: remove unnecessary initialisation of how]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
We assign ret with the error code, but then return 0 unconditionally.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
The dynamic linker from the GNU C library v2.10+ uses the ELF
auxiliary vector AT_RANDOM [1] as a pointer to 16 bytes with random
values to initialize the stack protection mechanism. Technically the
emulated GNU dynamic linker crashes due to a NULL pointer
derefencement if it is built with stack protection enabled and if
AT_RANDOM is not defined by the QEMU ELF loader.
[1] This ELF auxiliary vector was introduced in Linux v2.6.29.
This patch can be tested with the code above:
#include <elf.h> /* Elf*_auxv_t, AT_RANDOM, */
#include <stdio.h> /* printf(3), */
#include <stdlib.h> /* exit(3), EXIT_*, */
#include <stdint.h> /* uint8_t, */
#include <string.h> /* memcpy(3), */
#if defined(__LP64__) || defined(__ILP64__) || defined(__LLP64__)
# define Elf_auxv_t Elf64_auxv_t
#else
# define Elf_auxv_t Elf32_auxv_t
#endif
main(int argc, char* argv[], char* envp[])
{
Elf_auxv_t *auxv;
/* *envp = NULL marks end of envp. */
while (*envp++ != NULL);
/* auxv->a_type = AT_NULL marks the end of auxv. */
for (auxv = (Elf_auxv_t *)envp; auxv->a_type != AT_NULL; auxv++) {
if (auxv->a_type == AT_RANDOM) {
int i;
uint8_t rand_bytes[16];
printf("AT_RANDOM is: 0x%x\n", auxv->a_un.a_val);
memcpy(rand_bytes, (const uint8_t *)auxv->a_un.a_val, sizeof(rand_bytes));
printf("it points to: ");
for (i = 0; i < 16; i++) {
printf("0x%02x ", rand_bytes[i]);
}
printf("\n");
exit(EXIT_SUCCESS);
}
}
exit(EXIT_FAILURE);
}
Changes introduced in v2 and v3:
* Fix typos + thinko (AT_RANDOM is used for stack canary, not for
ASLR)
* AT_RANDOM points to 16 random bytes stored inside the user
stack.
* Add a small test program.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Laurent ALFONSI <laurent.alfonsi@st.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Some architectures (like Blackfin) only implement pselect6 (and skip
select/newselect). So add support for it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
There were several remaining bugs in the previous implementation of
do_brk():
1. the value of "new_alloc_size" was one page too large when the
requested brk was aligned on a host page boundary.
2. no new pages should be (re-)allocated when the requested brk is
in the range of the pages that were already allocated
previsouly (for the same purpose). Technically these pages are
never unmapped in the current implementation.
The problem/fix can be reproduced/validated with the test-suite above:
#include <unistd.h> /* syscall(2), */
#include <sys/syscall.h> /* SYS_brk, */
#include <stdio.h> /* puts(3), */
#include <stdlib.h> /* exit(3), EXIT_*, */
#include <stdint.h> /* uint*_t, */
#include <sys/mman.h> /* mmap(2), MAP_*, */
#include <string.h> /* memset(3), */
int main()
{
int exit_status = EXIT_SUCCESS;
uint8_t *current_brk = 0;
uint8_t *initial_brk;
uint8_t *new_brk;
uint8_t *old_brk;
int failure = 0;
int i;
void test_brk(int increment, int expected_result) {
new_brk = (uint8_t *)syscall(SYS_brk, current_brk + increment);
if ((new_brk == current_brk) == expected_result)
failure = 1;
current_brk = (uint8_t *)syscall(SYS_brk, 0);
}
void test_result() {
if (!failure)
puts("OK");
else {
puts("failure");
exit_status = EXIT_FAILURE;
}
}
void test_title(const char *title) {
failure = 0;
printf("%-45s : ", title);
fflush(stdout);
}
test_title("Initialization");
test_brk(0, 1);
initial_brk = current_brk;
test_result();
test_title("Don't overlap \"brk\" pages");
test_brk(HOST_PAGE_SIZE, 1);
test_brk(HOST_PAGE_SIZE, 1);
test_result();
/* Preparation for the test "Re-allocated heap is initialized". */
old_brk = current_brk - HOST_PAGE_SIZE;
memset(old_brk, 0xFF, HOST_PAGE_SIZE);
test_title("Don't allocate the same \"brk\" page twice");
test_brk(-HOST_PAGE_SIZE, 1);
test_brk(HOST_PAGE_SIZE, 1);
test_result();
test_title("Re-allocated \"brk\" pages are initialized");
for (i = 0; i < HOST_PAGE_SIZE; i++) {
if (old_brk[i] != 0) {
printf("(index = %d, value = 0x%x) ", i, old_brk[i]);
failure = 1;
break;
}
}
test_result();
test_title("Don't allocate \"brk\" pages over \"mmap\" pages");
new_brk = mmap(current_brk, HOST_PAGE_SIZE / 2, PROT_READ, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
if (new_brk == (void *) -1)
puts("unknown");
else {
test_brk(HOST_PAGE_SIZE, 0);
test_result();
}
test_title("All \"brk\" pages are writable (please wait)");
if (munmap(current_brk, HOST_PAGE_SIZE / 2) != 0)
puts("unknown");
else {
while (current_brk - initial_brk < 2*1024*1024*1024UL) {
old_brk = current_brk;
test_brk(HOST_PAGE_SIZE, -1);
if (old_brk == current_brk)
break;
for (i = 0; i < HOST_PAGE_SIZE; i++)
old_brk[i] = 0xAA;
}
puts("OK");
}
test_title("Maximum size of the heap > 16MB");
failure = (current_brk - initial_brk) < 16*1024*1024;
test_result();
exit(exit_status);
}
Changes introduced in patch v2:
* extend the "brk" test-suite embedded within the commit message;
* heap contents have to be initialized to zero, this bug was
exposed by "tst-calloc.c" from the GNU C library;
* don't [try to] allocate a new host page if the new "brk" is
equal to the latest allocated host page ("brk_page"); and
* print some debug information when DEBUGF_BRK is defined.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Reviewed-by: Christophe Guillon <christophe.guillon@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Since mmap() with MAP_FIXED will map over the top of existing mappings,
it's a bad idea to use it to implement brk(), because brk() with a
large size is likely to overwrite important things like qemu itself
or the host libc. So we drop MAP_FIXED and handle "mapped but at
different address" as an error case instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Fix a bug in the linux-user ELF loader code where it was not correctly
handling images where the lowest vaddr to be loaded was not page aligned.
The problem was that the code to probe for a suitable guest base address
was changing the 'loaddr' variable (by rounding it to a page boundary),
which meant that the load bias would then be incorrectly calculated
unless loaddr happened to already be page-aligned.
Binaries generated by gcc with the default linker script do start with
a loadable segment at a page-aligned vaddr, so were unaffected. This
bug was noticed with a binary created by the Google Go toolchain for ARM.
We fix the bug by refactoring the "probe for guest base" code out into
its own self-contained function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
This patch fixes a "double free()" due to "realloc(syms, 0)" in the
loader when the ELF file has no "useful" symbol, as with the following
example (compiled with "sh4-linux-gcc -nostdlib"):
.text
.align 1
.global _start
_start:
mov #1, r3
trapa #40 // syscall(__NR_exit)
nop
The bug appears when the log (option "-d") is enabled.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Signed-off-by: Yves JANIN <yves.janin@st.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Fixes crash in i386 when user emulation base address is non-zero.
21797 rt_sigreturn(8,1082124603,1,0,1082126048,1082126248)Exit reason and status: signal 11
Signed-off-by: Mike McCormack <mj.mccormack@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* rth/axp-next: (26 commits)
target-alpha: Implement TLB flush primitives.
target-alpha: Use a fixed frequency for the RPCC in system mode.
target-alpha: Trap for unassigned and unaligned addresses.
target-alpha: Remap PIO space for 43-bit KSEG for EV6.
target-alpha: Implement cpu_alpha_handle_mmu_fault for system mode.
target-alpha: Implement more CALL_PAL values inline.
target-alpha: Disable interrupts properly.
target-alpha: All ISA checks to use TB->FLAGS.
target-alpha: Swap shadow registers moving to/from PALmode.
target-alpha: Implement do_interrupt for system mode.
target-alpha: Add IPRs to be used by the emulation PALcode.
target-alpha: Use kernel mmu_idx for pal_mode.
target-alpha: Add various symbolic constants.
target-alpha: Use do_restore_state for arithmetic exceptions.
target-alpha: Tidy up arithmetic exceptions.
target-alpha: Tidy exception constants.
target-alpha: Enable the alpha-softmmu target.
target-alpha: Rationalize internal processor registers.
target-alpha: Merge HW_REI and HW_RET implementations.
target-alpha: Cleanup MMU modes.
...
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
There's no need to attempt to match EXCP_* values with PALcode entry
point offsets. Instead, compress all the values to make for more
efficient switch statements within QEMU.
We will be doing TLB fill within QEMU proper, not within the PALcode,
so all of the ITB/DTB miss, double fault, and access exceptions can
be compressed to EXCP_MMFAULT.
Compress all of the EXCP_CALL_PAL exceptions into one.
Use env->error_code to store the specific entry point.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Delete all the code that tried to emulate the real IPRs of some
unnamed CPU. Replace those with just 3 slots that we can use to
communicate trap information between the helper functions that
signal exceptions and the OS trap handler.
Signed-off-by: Richard Henderson <rth@twiddle.net>
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390x: complain when allocating ram fails
s390x: fix memory detection for guests > 64GB
s390x: change mapping base to allow guests > 2GB
s390x: Fix debugging for unknown sigp order codes
s390x: build s390x by default
s390x: remove compatibility cc field
s390x: Adjust GDB stub
s390x: translate engine for s390x CPU
s390x: Adjust internal kvm code
s390x: Implement opcode helpers
s390x: helper functions for system emulation
s390x: Shift variables in CPUState for memset(0)
s390x: keep hint on virtio managing size
s390x: make kvm exported functions conditional on kvm
s390x: s390x-linux-user support
tcg: extend max tcg opcodes when using 64-on-32bit
s390x: fix smp support for kvm
tb_invalidate_page_range() was intended to be used to invalidate an
area of a TB which the guest explicitly flushes from i-cache. However,
QEMU detects writes to code areas where TBs have been generated, so
his has never been useful.
Delete the function, adjust callers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds support for running s390x binaries in the linux-user emulation
code.
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Function bzero is deprecated, so replace it by function memset.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
