SLIRP expects a CharBackend as the third argument to slirp_add_exec,
but net/slirp.c was passing a CharDriverState. Fix this to restore
guestfwd functionality.
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.
The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to previous change, for the remaining CharDriverState front ends
users.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The CharDriverState.init() callback is no longer set since commit
a61ae7f88c and thus unused. The only user, the malta FGPA display has
been converted to use an event "opened" callback instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit f6c2e66ae8, slirp uses an exit notifier to call
slirp_smb_cleanup. However, if init() failed, the notifier isn't added,
and removing it will fail:
==18447== Invalid write of size 8
==18447== at 0x7EF2B5: notifier_remove (notify.c:32)
==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661)
==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134)
==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338)
==18447== by 0x69445B: qemu_del_net_client (net.c:401)
==18447== by 0x6A2B81: net_slirp_init (slirp.c:366)
==18447== by 0x6A4241: net_init_slirp (slirp.c:865)
==18447== by 0x695C6D: net_client_init1 (net.c:1051)
==18447== by 0x695F6E: net_client_init (net.c:1108)
==18447== by 0x696DBA: net_init_netdev (net.c:1498)
==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116)
==18447== by 0x696E60: net_init_clients (net.c:1516)
==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This is a mostly-mechanical conversion that creates a new flat
union 'Netdev' QAPI type that covers all the branches of the
former 'NetClientOptions' simple union, where the branches are
now listed in a new 'NetClientDriver' enum rather than generated
from the simple union. The existence of a flat union has no
change to the command line syntax accepted for new code, and
will make it possible for a future patch to switch the QMP
command to parse a boxed union for no change to valid QMP; but
it does have some ripple effect on the C code when dealing with
the new types.
While making the conversion, note that the 'NetLegacy' type
remains unchanged: it applies only to legacy command line options,
and will not be ported to QMP, so it should remain a wrapper
around a simple union; to avoid confusion, the type named
'NetClientOptions' is now gone, and we introduce 'NetLegacyOptions'
in its place. Then, in the C code, we convert from NetLegacy to
Netdev as soon as possible, so that the bulk of the net stack
only has to deal with one QAPI type, not two. Note that since
the old legacy code always rejected 'hubport', we can just omit
that branch from the new 'NetLegacyOptions' simple union.
Based on an idea originally by Zoltán Kővágó <DirtY.iCE.hu@gmail.com>:
Message-Id: <01a527fbf1a5de880091f98cf011616a78adeeee.1441627176.git.DirtY.iCE.hu@gmail.com>
although the sed script in that patch no longer applies due to
other changes in the tree since then, and I also did some manual
cleanups (such as fixing whitespace to keep checkpatch happy).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-13-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Fixup from Eric squashed in]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This way we no longer need NetClientOptions and can convert Netdev
into a flat union.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <93ffdfed7054529635e6acb935150d95dc173a12.1441627176.git.DirtY.iCE.hu@gmail.com>
[rework net_client_init1() to pass Netdev by copying from NetdevLegacy,
rather than merging the two types - which means that we still need
NetClientOptions after all. Rebase to qapi changes. The bulk of the
patch is mechanical, replacing 'opts' by 'netdev->opts', while
net_client_init1() takes care of converting between legacy and modern
types.]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1468468228-27827-2-git-send-email-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to move back net_cleanup() at the end of main function,
like it used to be until f30dbae63a, but minimum
cleanup is needed regardless at exit() time for slirp's SMB
functionality. Use an exit notifier to call slirp_smb_cleanup.
If net_cleanup() is called first, then remove the exit notifier as it
will become a dangling pointer otherwise.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and
IPv6-only network environments.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Rename the recently-added ip6-foo options into ipv6-foo options, to make
them coherent with other ipv6 options.
Also rework the documentation.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simple unions were carrying a special case that hid their 'data'
QMP member from the resulting C struct, via the hack method
QAPISchemaObjectTypeVariant.simple_union_type(). But by using
the work we started by unboxing flat union and alternate
branches, coupled with the ability to visit the members of an
implicit type, we can now expose the simple union's implicit
type in qapi-types.h:
| struct q_obj_ImageInfoSpecificQCow2_wrapper {
| ImageInfoSpecificQCow2 *data;
| };
|
| struct q_obj_ImageInfoSpecificVmdk_wrapper {
| ImageInfoSpecificVmdk *data;
| };
...
| struct ImageInfoSpecific {
| ImageInfoSpecificKind type;
| union { /* union tag is @type */
| void *data;
|- ImageInfoSpecificQCow2 *qcow2;
|- ImageInfoSpecificVmdk *vmdk;
|+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2;
|+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk;
| } u;
| };
Doing this removes asymmetry between QAPI's QMP side and its
C side (both sides now expose 'data'), and means that the
treatment of a simple union as sugar for a flat union is now
equivalent in both languages (previously the two approaches used
a different layer of dereferencing, where the simple union could
be converted to a flat union with equivalent C layout but
different {} on the wire, or to an equivalent QMP wire form
but with different C representation). Using the implicit type
also lets us get rid of the simple_union_type() hack.
Of course, now all clients of simple unions have to adjust from
using su->u.member to using su->u.member.data; while this touches
a number of files in the tree, some earlier cleanup patches
helped minimize the change to the initialization of a temporary
variable rather than every single member access. The generated
qapi-visit.c code is also affected by the layout change:
|@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member
| }
| switch (obj->type) {
| case IMAGE_INFO_SPECIFIC_KIND_QCOW2:
|- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err);
|+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err);
| break;
| case IMAGE_INFO_SPECIFIC_KIND_VMDK:
|- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err);
|+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err);
| break;
| default:
| abort();
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch adds parameters to manage some new options in the qemu -net
command.
Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in
argument to the qemu command.
Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3.
Signed-off-by: Yann Bordenave <meow@meowstars.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-11-git-send-email-peter.maydell@linaro.org
We don't want to support the legacy -tftp, -bootp, -smb and
-net channel options forever. So let's start telling the users
that they are deprecated and what option should be used instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We have two issues with our qapi union layout:
1) Even though the QMP wire format spells the tag 'type', the
C code spells it 'kind', requiring some hacks in the generator.
2) The C struct uses an anonymous union, which places all tag
values in the same namespace as all non-variant members. This
leads to spurious collisions if a tag value matches a non-variant
member's name.
Make the conversion to the new layout for net-related code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1445898903-12082-18-git-send-email-eblake@redhat.com>
[Commit message tweaked slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
In this version I used mkdtemp(3) which is:
_BSD_SOURCE
|| /* Since glibc 2.10: */
(_POSIX_C_SOURCE >= 200809L || _XOPEN_SOURCE >= 700)
(POSIX.1-2008), so should be available on systems we care about.
While at it, reset the resulting directory name within smb structure
on error so cleanup function wont try to remove directory which we
failed to create.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Error reporting for netdev_add is broken: the net_client_init_fun[]
report the actual errors with (at best) error_report(), and their
caller net_client_init1() makes up a generic error on top.
For command line and HMP, this produces an mildly ugly error cascade.
In QMP, the actual errors go to stderr, and the generic error becomes
the command's error reply.
To fix this, we need to convert the net_client_init_fun[] to Error.
To permit fixing them one by one, add an Error ** parameter to the
net_client_init_fun[]. If the call fails without returning an Error,
make up the same generic Error as before. But if it returns one, use
that instead. Since none of them does so far, no functional change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1431691143-1015-3-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some are called do_info_SUBCOMMAND() (old ones, usually), some
hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND
pointlessly differs in spelling.
Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the
subcommand name with '-' replaced by '_'.
Exceptions:
* sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(),
sun4m_hmp_info_pic().
* lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(),
lm32_hmp_info_pic().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.
Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.
Exceptions:
* do_device_add() and client_migrate_info() *not* renamed to
hmp_device_add(), hmp_client_migrate_info(), because they're also
QMP handlers. They still need to be converted to QAPI.
* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
hmp_i(), hmp_o(), because those names are too cryptic for my taste.
* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
because it only covers help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
commit b412eb61 introduce 'cmd:' target for guestfwd,
and fwd don't be used in this scenario, and will leak
memory in true branch with 'cmd:'. Let's allocate memory
for fwd variable just in else statement.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The file sharing module should not handle printers, so disable it.
The options 'load printers' and 'printing' have been available since the
beginning (May 1996, commit 0e8fd3398771da2f016d72830179507f3edda51b).
Option 'disable spoolss' is available since Samba 2.0.4, commit
de5f42c9d9172592779fa2504d44544e3b6b1c0d).
Next, "socket address" was reported as deprecated, use a combination of
"interfaces" and "bind interfaces only" instead (available since October
1997, commit 79f4fb52c1ed56fd843f81b4eb0cdd2991d4d0f4).
Override cache directory to avoid writing to a global directory. Option
available since Samba 3.4.0, Jan 2009, commit
19a05bf2f485023b11b41dfae3f6459847d55ef7.
Set "usershare max shared=0" to prevent a global directory from being
used. Option available since Samba 3.0.23, February 2006, commit
5831715049f2d460ce42299963a5defdc160891b.
The last option was introduced with Samba 3.4.0, but previously
"state directory" was already added which exists in Samba 3.4.0. As
unknown parameters are ignored (while printing a warning), it should be
safe to add another option.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It looks like smbd always logs to /var/log/samba/log.$progname
even if config file specifies different logfile -- when it needs
to log something before completing reading the config file. But
if it can't open it for writing, it fails and exits. Tell smbd
to use our temp dir as logbase (-l option) to avoid that.
The same option is used by samba3 and samba4, so there should
be no incompatible changes.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
The hostfwd_add and hostfwd_remove monitor commands allow the user
to optionally specify a vlan/stack tuple. hostfwd_add honours this,
but hostfwd_remove does not (it looks up the tuple but then ignores
the SlirpState it has looked up and always uses the first stack
in the list anyway). Correct this to honour what the user requested.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If the user specified a (vlan ID, slirp stack name) tuple in a monitor
hostfwd_add/remove command and we can't find it, give the user an
error message rather than silently doing nothing.
This brings this error case in slirp_lookup() into line with the
other two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The smbd forked by qemu still uses the default ncalrpc directory
in /var/run/samba. This may lead to problems, if /var/run/samba
does not exist (for example if /var/run is a tmpfs and the host
smbd was not started).
This leads to the following error message from samba
and an unworkable smbd:
Failed to create pipe directory /var/run/samba/ncalrpc - No such file or directory
Fix this by pointing smbd to /tmp/qemu-smb.%d.%d/ncalrpc as ncalrpc directory.
Smbd will create the actual ncalrpc subdirectory on its own.
Signed-off-by: Michael Buesch <m@bues.ch>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Applying this to -trivial because it _is_ rather trivial
and because Jan does not reply for months)
After numerous reports that -smb (or -netdev user,smb=foo) not working
with modern windows (win7 and vista are reported as non-working), I
started digging myself. And found that indeed it doesn't work, and
why.
The thing is that modern win tries to connect to port 445 (microsoft-ds)
first, and if that fails, it falls back to old port 139 (netbios-ssn).
slirp code in qemu only redirects port 139, it does not touch port 445.
So the prob is that if samba is also running on the host, guest will try
to communicate using port 445, and that will succed, but ofcourse guest
will not talk with our samba but with samba running on the host.
If samba is not running on the host, guest will fall back to port 139,
and will reach the redirecting rule and qemu will spawn smbd correctly.
The solution is to redirect both ports (139 and 445), and the fix is
a one-liner, adding second call to slirp_add_exec() at the end of
net/slirp.c:slirp_smb() function (provided below).
But it looks like that is not a proper fix really, since in theory
we should redirect both ports to the SAME, single samba instance,
but I'm not sure this is possible with slirp. Well, even if two
smbd processes will be run on the same config dir, it should not
be a problem.
The one-liner (not exactly 1 since it touches previous line too) is like
this:
Signed-off-By: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The smb.conf automatically generated by qemu's -smb option fails on current
samba, because smbd rejects the security=share option with the following warning:
> WARNING: Ignoring invalid value 'share' for parameter 'security'
Which makes it fall back to security=user without guest login.
This results in being unable to login to the samba server from the guest OS.
This fixes it by selecting 'user' explicitly and mapping
unknown users to guest logins.
Signed-off-by: Michael Buesch <m@bues.ch>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
reorder slirp config options. first check the dns-server-address,
then check the first-dhcp-address. the original code was comparing
the first-dhcp-address with the default dns-server-address, not
the configured dns-server-address.
Signed-off-by: Bas van Sisseren <bas@quarantainenet.nl>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
chardev-frontends need to explictly check, increase and decrement the
avail_connections "property" of the chardev when they are not using a
qdev-chardev-property for the chardev.
This fixes things like:
qemu-kvm -chardev stdio,id=foo -device isa-serial,chardev=foo \
-mon chardev=foo
Working, where they should fail. Most of the changes here are due to
old hardware emulation code which is using serial_hds directly rather then
a qdev-chardev-property.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364412581-3672-3-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed. Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Touching char/char.h basically causes the whole of QEMU to
be rebuilt. Avoid this, it is usually unnecessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch will allow the user to include the domain-search option in
replies from the built-in DHCP server. The domain suffixes can be
specified by adding dnssearch= entries to the "-net user" parameter.
[Jan: tiny style adjustments]
Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch doesn't seem much useful alone, I must admit. However,
it makes sense as part of the upcoming directory reorganization,
where I want to have include/net/tap.h as the net<->hw interface
for tap. Then having both net/tap.h and include/net/tap.h does
not work. "Fixed" by moving all the init functions to a single
header file net/clients.h.
The patch also adopts a uniform style for including net/*.h files
from net/*.c, without the net/ path.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Clang compiler complained about use of reserved word 'restrict' in SLIRP
and QAPI.
Prefix C keywords with "q_", adjust SLIRP accordingly.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Another step in moving the vlan feature out of net core. Users only
deal with NetClientState and therefore qemu_del_vlan_client() should be
named qemu_del_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan feature is no longer part of net core. Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.
This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since hubs are now used to implement the 'vlan' feature and the vlan
argument is always NULL, remove the argument entirely and update all net
clients that use qemu_new_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
