Add a definition of the SIOCGIFINDEX ioctl, allowing its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a definition of the KDSIGACCEPT ioctl & allow its use by target
programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This allows to pass the device name.
You can test this with the "route" command.
WITHOUT this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
SIOCADDRT: Bad address
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
WITH this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fix the SNDCTL_DSP_MAP{IN,OUT}BUF ioctl definitions so that they
refer to a suitably defined target struct layout rather than hardcoding
the ioctl number. This fixes complaints from the syscall_init()
consistency check when running an x86_64-to-x86_64 linux-user qemu.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the ioctl wrapper definition for BLKBSZGET.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch implements all ioctls currently implemented by device mapper,
enabling us to run dmsetup and kpartx inside of linux-user.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch was validated with programs from DirectFB-1.0 and
WebKit/DirectFB.
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
DirectFB-1.0 uses at least two of the four added ioctls, and the two
others were added for completeness. This patch was validated with the
program "vlock -all/-new".
Signed-off-by: Cédric VINCENT <cedric.vincent@st.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The result needs to be converted as it is stored in an array of struct
ifreq and sizeof(struct ifreq) differs according to target and host
alignment rules.
This patch allows to execute correctly the following program on arm
and m68k:
#include <stdio.h>
#include <sys/ioctl.h>
#include <net/if.h>
#include <alloca.h>
#include <string.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
int main(void)
{
int s, ret;
struct ifconf ifc;
int i;
memset( &ifc, 0, sizeof( struct ifconf ) );
ifc.ifc_len = 8 * sizeof(struct ifreq);
ifc.ifc_buf = alloca(ifc.ifc_len);
s = socket( AF_INET, SOCK_DGRAM, 0 );
if (s < 0) {
perror("Cannot open socket");
return 1;
}
ret = ioctl( s, SIOCGIFCONF, &ifc );
if (s < 0) {
perror("ioctl() failed");
return 1;
}
for (i = 0; i < ifc.ifc_len / sizeof(struct ifreq) ; i ++) {
struct sockaddr_in *s;
s = (struct sockaddr_in*)&ifc.ifc_req[i].ifr_addr;
printf("%s\n", ifc.ifc_req[i].ifr_name);
printf("%s\n", inet_ntoa(s->sin_addr));
}
}
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
In case a chrooted build uses XEN or KVM, a looped mount needs to be done to setup the chroot.
The ioctl for loop mount works correctly for arm, mips, ppc32 and sh4, so its now activated.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Add a configure check for the existence of linux/fiemap.h and the
IOC_FS_FIEMAP ioctl. This fixes a compilation failure on Linux
systems which don't have that header file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the FS_IOC_FIEMAP ioctl using the new support for
custom handling of ioctls; this is needed because the struct
that is passed includes a variable-length array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
everything needed to run SDL on a framebuffer device in the userspace emulator
Signed-off-by: Ulrich Hecht <uli@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
which included commits to RCS files with non-trunk default branches.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3 c046a42c-6fe2-441c-8c8c-71466251a162
