cppcheck reports this error:
hw/spapr_vscsi.c:274: error: Uninitialized variable: rc
If llen == 0, rc was indeed used without being initialized.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This will deadlock when the I/O thread is used, since the
CPU thread is blocked waiting for qemu_system_ready.
The synchronization is unnecessary since this is before
cpu_synchronize_all_post_init().
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Like all block drivers virtio-blk should not allow small than block size
granularity access. But given that the protocol specifies a
byte unit length field we currently accept such requests, which cause
qemu to abort() in lower layers. Add checks to the main read and
write handlers to catch them early.
Reported-by: Conor Murphy <conor_murphy_virt@hotmail.com>
Tested-by: Conor Murphy <conor_murphy_virt@hotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The specification for the virtio balloon device requres that the values
in the config space be encoded little-endian. This differs from most
virtio things, where guest-native endian is the norm.
Currently, the qemu virtio-balloon code correctly makes the conversion
on get_config(), but doesn't on set_config for the 'actual' field. The
kernel driver, on the other hand, correctly converts when setting the
actual field, but does not convert when reading the config space. The
upshot is that virtio-balloon will only work correctly if both host and
guest are LE, making all the conversions nops.
This patch corrects the qemu side, correctly doing host-native <-> LE
conversions when accessing the config space. This won't break any setups
that aren't already broken, and fixes the case of BE host, LE guest.
Fixing the BE guest case will require kernel fixes as well.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The 9p code already contains an attempt at the necessary endian
conversions, but it's broken.
The code which does conversion from host to guest does it correctly
and this code was copied to the function which does guest to host
conversion. However the copied code hasn't been correctly updated, so
it first endian converts some garbage on the stack and then overwrites
it with a field from incoming packet without conversion.
The patch fixes the mistakes.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Compiling with the DEBUG macro causes leaves hw/spapr_llan.c with an
unused variable, which is treated as an error in the qemu build.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In previous life qdev_init_nofail() used to call hw_error() which
did register dump and other scary things. Now it calls
error_report() and does a regular exit(1). Fix the comment
to match reality.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
While looking at David Gibson's build-fix for hw/usb-ccid.c, I noticed a spello
in a comment on the following (unchanged) line.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
block_mig_state.reads is an int, and multiplying by BLOCK_SIZE yielded a
negative number, resulting in a negative bandwidth (running on a 32-bit
machine). Change order to avoid.
Signed-off-by: Avishay Traeger <avishay@il.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need to keep DIR register unchanged across migration, but currently it
depends on the media_changed flags from block layer. Since we do not
save/restore it and the bdrv_open() called in dest node may set the
media_changed flag when trying to open floppy image, guest driver may think the
floppy have changed after migration. To fix this, a new filed media_changed in
FDrive strcutre was introduced in order to save and restore the it from block
layer through pre_save/post_load callbacks.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We also change the way the file parameter is parsed so IPv6 IP
addresses can be used, e.g.: "drive=nbd:[::1]:5000"
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit has the side-effect of making the qemu-nbd binary
capable of binding to IPv6 addresses. ("-b ::1", for instance).
block/nbd.c fails to parse IPv6 IP addresses correctly at this
point, but will work over IPv6 when given a hostname. It still
works over IPv4 as before.
We move the qemu-sockets object from the 'common' to the 'block'
list in the Makefile. The common list includes the block list,
so this is effectively a no-op for the rest of the code.
We also add 32-bit 'magic' attributes to nbd_(request|reply) to
facilitate calculating maximum request/response sizes later.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
factor out ide initialization to call drive_get(IF_IDE)
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes the problem when qemu continues even if -drive specification
is somehow invalid, resulting in a mess. Applicable for both current
master and for stable-0.14 (and the same issue exist 0.13 and 0.12 too).
The prob can actually be seriuos: when you start guest with two drives
and make an error in the specification of one of them, and the guest
has something like a raid array on the two drives, guest may start failing
that array or kick "missing" drives which may result in a mess - this is
what actually happened to me, I did't want a resync at all, and a resync
resulted in re-writing (and allocating) a 4TB virtual drive I used for
testing, which in turn resulted in my filesystem filling up and whole
thing failing badly. Yes it was just testing VM, I experimented with
larger raid arrays, but the end result was quite, well, unexpected.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_delete must not be called for a NULL BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This adds the basic infrastructure for supporting progress output
on the command line, as well as progress support for qemu-img commands
'rebase' and 'convert'.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer caches the device size to avoid doing lseek(fd, 0,
SEEK_END) every time this value is needed. For removable media the
device size becomes stale if a new medium is inserted. This patch
simply prevents device size caching for removable media.
A smarter solution is to update the cached device size when a new medium
is inserted. Given that there are currently bugs with CD-ROM media
change I do not want to implement that approach until we've gotten
things correct first.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It can be handy to know when the guest locks/unlocks the CD-ROM tray.
This trace event makes that possible.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When removing a drive from the host-side via drive_del we currently have
the following path:
drive_del
qemu_aio_flush()
bdrv_close() // zaps bs->drv, which makes any subsequent I/O get
// dropped. Works as designed
drive_uninit()
bdrv_delete() // frees the bs. Since the device is still connected to
// bs, any subsequent I/O is a use-after-free.
The value of bs->drv becomes unpredictable on free. As long as it
remains null, I/O still gets dropped, however it could become non-null
at any point after the free resulting SEGVs or other QEMU state
corruption.
To resolve this issue as simply as possible, we can chose to not
actually delete the BlockDriverState pointer. Since bdrv_close()
handles setting the drv pointer to NULL, we just need to remove the
BlockDriverState from the QLIST that is used to enumerate the block
devices. This is currently handled within bdrv_delete, so move this
into its own function, bdrv_make_anon().
The result is that we can now invoke drive_del, this closes the file
descriptors and sets BlockDriverState->drv to NULL which prevents futher
IO to the device, and since we do not free BlockDriverState, we don't
have to worry about the copy retained in the block devices.
We also don't attempt to remove the qdev property since we are no longer
deleting the BlockDriverState on drives with associated drives. This
also allows for removing Drives with no devices associated either.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Bug fix: routines 'ioreq_runio_qemu_sync' and 'ioreq_runio_qemu_aio'
won't call 'ioreq_unmap' or 'ioreq_finish' on errors, leaving ioreq in
the blkdev->inflight list and a leak.
Signed-off-by: Feiran Zheng <famcool@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is similar to pci_register_bar(), but automatically registers a single
memory region spanning the entire BAR.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cirrus VGA (at least) calls register memory region
with the same values again and again. The
registration in vhost-net slows this a lot,
optimize by checking that the same data is already registered.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Standard autoconf scripts include a --version flag so people can easily
query things. Add this to qemu's configure so it too can integrate with
build systems that have standard autotool helpers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
use the new api to reduce the number of these (expensive)
system calls.
Note: using this API, we should be able to
get rid of vga_dirty_log_xxx APIs. Using them doesn't
affect the performance though because we detects
the log_dirty flag set and ignores the call.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPU_QuadU isn't used on all targets, but there's no harm in defining the
typedef anyway. It only needs to be guarded by CONFIG_SOFTFLOAT, because
softfloat-native doesn't have a float128 type. This avoids the need for
every new target which uses CPU_QuadU to add itself to an #ifdef in
what ought to be target-agnostic code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make the Neon helper routines use the correct FP status from
the CPUEnv rather than using a dummy static one. This means
they will correctly handle denormals and NaNs and will set
FPSCR exception bits properly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the global 'env' variable in the helper functions in iwmmxt_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the global 'env' variable in the helper functions in neon_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Build all files matching *_helper.c with HELPER_CFLAGS, not just
op_helper.c. This allows you to put target helper functions which
use the global 'env' variable in multiple source files.
This only affects the ARM target as all the other targets currently only
have op_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
At one point, usb-ccid.c attempts to use a %lX format specifier to print
a uint64_t, which is only correct on some host platforms. This patch
corrects the statement to use the stdint specified PRIX64 constant instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).
Additional to running bare metal applications, booting a linux kernel with
initrd is supported.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds wrappers for easy creation of the qdev devices.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
