The 'printk.time=0' option makes it easier to parse the console
output. Let's set it as a default, and reusable, kernel command line
options for this and future similar tests.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-10-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Update to the stock Fedora 29 kernel, from the Fedora 28. New tests
will be added using the 29 kernel, so for consistency, let's also
update it here.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
CC: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190312171824.5134-9-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Given that the test is specific to x86_64 and pc, and new tests are
going to be added to the same class, let's rename it accordingly.
Also, let's make the class documentation not architecture specific.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-8-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A test can, optionally, be tagged for one or many architectures. If a
test has been tagged for a single architecture, there's a high chance
that the test won't run on other architectures. This changes the
default order of choosing a default target architecture to use based
on the 'arch' tag value first.
The precedence order is for choosing a QEMU binary to use for a test
is now:
* qemu_bin parameter
* arch parameter
* arch tag value (for example, x86_64 if "🥑 tags=arch:x86_64
is used)
This means that if one runs:
$ avocado run -p qemu_bin=/usr/bin/qemu-system-x86_64 test.py
No arch parameter or tag will influence the selection of the QEMU
target binary. If one runs:
$ avocado run -p arch=ppc64 test.py
The target binary selection mechanism will attempt to find a binary
such as "ppc64-softmmu/qemu-system-ppc64". And finally, if one runs
a test that is tagged (in its docstring) with "arch:aarch64":
$ avocado run aarch64.py
The target binary selection mechanism will attempt to find a binary
such as "aarch64-softmmu/qemu-system-aarch64".
At this time, no provision is made to cancel the execution of tests if
the arch parameter given (manually) does not match the test "arch"
tag, but it may be a useful default behavior to be added in the
future.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-7-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, some tests contains target architecture information, in the
form of a "x86_64" tag. But that tag is not respected in the default
execution, that is, "make check-acceptance" doesn't do anything with
it.
That said, even the target architecture handling currently present in
the "avocado_qemu.Test" class is pretty limited. For instance, by
default, it chooses a target based on the host architecture.
Because the original implementation of the tags feature in Avocado did
not include any time of namespace or "key:val" mechanism, no tag has
relation to another tag. The new implementation of the tags feature
from version 67.0 onwards, allows "key:val" tags, and because of that,
a test can be classified with a tag in a given key. For instance, the
new proposed version of the "boot_linux_console.py" test, which
downloads and attempts to run a x86_64 kernel, is now tagged as:
🥑 tags=arch:x86_64
This means that it can be filtered (out) when no x86_64 target is
available. At the same time, tests that don't have a "arch:" tag,
will not be filtered out.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-6-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's useful to define the architecture that should be used in
situations such as:
* the intended target of the QEMU binary to be used on tests
* the architecture of code to be run within the QEMU binary, such
as a kernel image or a full blown guest OS image
This commit introduces both a test parameter and a test instance
attribute, that will contain such a value.
Now, when the "arch" test parameter is given, it will influence the
selection of the default QEMU binary, if one is not given explicitly
by means of the "qemu_img" parameter.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-5-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The "this directory" reference is misleading and confusing, it's a
leftover from when this text was proposed in a README file inside
the "tests/acceptance/avocado_qemu" directory.
When that text was moved to the top level docs directory, the
reference was not updated.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-4-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Making it clear what is returned by this utility function.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current version of the "check-acceptance" target will only show
one line for execution of all tests. That's probably OK if the tests
to be run are quick enough and they're always the same.
But, there's already one test alone that takes on average ~5 seconds
to run, we intend to adapt the list of tests to match the user's build
environment (among other choices).
Because of that, let's present the default Avocado UI by default.
Users can always choose a different output by setting the AVOCADO_SHOW
variable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The slirp project is now hosted on freedesktop at:
https://gitlab.freedesktop.org/slirp.
The libslirp source was extracted from qemu/slirp filtered through
clang-format (available in project tree). The qemu slirp directory can
be swapped by a git submodule.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
CFLAGS/LDFLAGS have debug and sanitizers flags, which should be passed
to slirp compilation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-2-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
All the example code are indented with four spaces except this one.
Fix this by adding four spaces here.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190304071631.27567-3-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We didn't specify the indent rule for multiline code here, which may
mislead users. And in current code, the code use various styles.
Add this rule in CODING_STYLE to make sure this is clear to every one.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20190304071631.27567-2-richardw.yang@linux.intel.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Both functions, object_initialize() and object_property_add_child() increase
the reference counter of the new object, so one of the references has to be
dropped afterwards to get the reference counting right. Otherwise the child
object might not be properly cleaned up when the parent gets destroyed.
Some functions of the pci-host devices miss to drop one of the references.
Fix it by using object_initialize_child() instead, which takes care of
calling object_initialize(), object_property_add_child() and object_unref()
in the right order.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190430191552.4027-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All major distributions do support libseccomp version >= 2.3.0, so there
is no need to special-case on various architectures any longer.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20190404183923.GA22347@ls3530.dellerweb.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When running "make" in a build directory from the pre-Kconfig merge time,
the build process currently fails with:
make: *** No rule to make target `.../default-configs/pci.mak',
needed by `aarch64-softmmu/config-devices.mak'. Stop.
To make sure that this problem at least goes away when the user runs
"configure" (or "sh config.status") again, we have to make sure that
we re-generate the .mak.d files. Thus remove the old stale files
while running the configure script.
Message-Id: <1552300145-12526-1-git-send-email-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Without the -Wno-typedef-redefinition option, clang complains if a typedef
gets redefined in gnu99 mode (since this is officially a C11 feature). This
used to also happen with older versions of GCC, but since we've bumped our
minimum GCC version to 4.8, all versions of GCC that we support do not seem
to issue this warning in gnu99 mode anymore. So this has become a common
problem for people who only test their code with GCC - they do not notice
the issue until they submit their patches and suddenly patchew or a
maintainer complains.
Now that we do not urgently need to keep the code clean from typedef
redefintions anymore with recent versions of GCC, we can ease the
situation with clang, too, and simply shut these warnings off for good.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190427154539.11336-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The field is not used anymore, we can remove it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190422210448.2488-4-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [on mingw64]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qtest_available() will always return 0 on non-POSIX systems.
It's simpler to just not compile the accelerator code on those
systems instead of relying on the AccelClass::available function.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190422210448.2488-3-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [on mingw64]
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QTest has two parts: the server (-qtest) and the accelerator
(-machine accel=qtest). The accelerator depends on CONFIG_POSIX
due to its usage of sigwait(), but the server doesn't.
Move the accel code to accel/qtest.c. Later we will disable
compilation of accel/qtest.c on non-POSIX systems.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190422210448.2488-2-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: added fixup for MAINTAINERS file]
Signed-off-by: Thomas Huth <thuth@redhat.com>
So far we do not have any test coverage for TCI (the TCG interpreter) yet.
Thus let's add a CI pipeline that runs at least some basic TCG tests with
a TCI build, to make sure that there are no further regressions.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190410123550.2362-1-thuth@redhat.com>
Some machines (like the pxa2xx-based ARM machines) only have a sysbus
OHCI controller, but no PCI. With the new Kconfig-style build system,
it will soon be possible to create QEMU binaries that only contain
such PCI-less machines. However, the two OHCI controllers, for sysbus
and for PCI, are currently both located in one file, so the PCI code
is still required for linking here. Move the OHCI-PCI device code
into a separate file, so that it is possible to use the sysbus OHCI
device also without the PCI dependency.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190419075625.24251-3-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The ohci_die() function always assumes to be running with a PCI OHCI
controller and calls the PCI-specific functions pci_set_word(). However,
this function might also get called for the sysbus OHCI devices, so it
likely fails in that case. To fix this issue, change the code now, so that
there are two implementations now, one for sysbus and one for PCI, and
use the right function via a function pointer in the OHCIState structure.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190419075625.24251-2-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
we found the following core in our environment:
0 0x00007fc6b06c2237 in raise ()
1 0x00007fc6b06c3928 in abort ()
2 0x00007fc6b06bb056 in __assert_fail_base ()
3 0x00007fc6b06bb102 in __assert_fail ()
4 0x0000000000702e36 in xhci_kick_ep (...)
5 0x000000000047897a in memory_region_write_accessor (...)
6 0x000000000047767f in access_with_adjusted_size (...)
7 0x000000000047944d in memory_region_dispatch_write (...)
(mr=mr@entry=0x7fc6a0138df0, addr=addr@entry=156, data=1648892416,
size=size@entry=4, attrs=attrs@entry=...)
8 0x000000000042df17 in address_space_write_continue (...)
10 0x000000000043084d in address_space_rw (...)
11 0x000000000047451b in kvm_cpu_exec (cpu=cpu@entry=0x1ab11b0)
12 0x000000000045dcf5 in qemu_kvm_cpu_thread_fn (arg=0x1ab11b0)
13 0x0000000000870631 in qemu_thread_start (args=args@entry=0x1acfb50)
14 0x00000000008959a7 in thread_entry_for_hotfix (pthread_cb=<optimized out>)
15 0x00007fc6b0a60dd5 in start_thread ()
16 0x00007fc6b078a59d in clone ()
(gdb) f 5
5 0x000000000047897a in memory_region_write_accessor (...)
529 mr->ops->write(mr->opaque, addr, tmp, size);
(gdb) p /x tmp
$9 = 0x62481a00 <-- last byte 0x00 is @epid
xhci_doorbell_write() already check the upper bound of @slotid an @epid,
it also need to check the lower bound.
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Longpeng <longpeng2@huawei.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1556605301-44112-1-git-send-email-longpeng2@huawei.com
[ kraxel: fixed typo in subject line ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit c5ead51f90 (usb-mtp: return incomplete transfer on a lstat
failure) checks if lstat succeeded when updating attributes of a
file. However, it also changed behavior to return an error by
default. This is incorrect because for smaller file sizes, Qemu
will attempt to write the file in one go and there won't be
an object for it.
Fixes: c5ead51f90
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: jpgwojv9pwv.fsf@linux.bootlegged.copy
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The ObjectInfo struct's "filename" field is following a uint8_t
field in a packed struct and thus has bad alignment for a 16-bit
field. Switch the field to to uint8_t and use the helper function
for accessing unaligned 16-bit data.
Note that although the MTP spec specifies big endian, when transported
over the USB protocol, data is little endian.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190415154503.6758-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The ObjectInfo 'length' field provides the length of the
wide character string filename. This is then converted to
a multi-byte character string. This may have a different
byte count to the wide character string. We should use the
C string length of the multi-byte string instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190415154503.6758-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This just about rewrites the entirety of the bitmaps.rst document to
make it consistent with the 4.0 release. I have added new features seen
in the 4.0 release, as well as tried to clarify some points that keep
coming up when discussing this feature both in-house and upstream.
It does not yet cover pull backups or migration details, but I intend to
keep extending this document to cover those cases.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-3-jsnow@redhat.com
[Adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
If we add references that don't resolve (or accidentally remove them),
it will be helpful to have warning messages alerting us to that.
Further, turn those warnings into errors so we can be alerted to these
problems sooner rather than later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190426221528.30293-2-jsnow@redhat.com
[adjusted commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add a gva2gpa command purely for debug which performs
address translation on the gva, the existing gpa2hva
command can then also be used to find it in the qemu
userspace; e.g.
(qemu) info registers
.... RSP=ffffffff81c03e98
....
(qemu) gva2gpa 0xffffffff81c03e98
gpa: 0x1c03e98
(qemu) gpa2hva 0x1c03e98
Host virtual address for 0x1c03e98 (pc.ram) is 0x7f0599a03e98
(qemu) x/10x 0xffffffff81c03e98
ffffffff81c03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
ffffffff81c03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
ffffffff81c03eb8: 0x81c03ec8 0xffffffff
gdb -p ...qemu...
(gdb) x/10x 0x7f0599a03e98
0x7f0599a03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff
0x7f0599a03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000
0x7f0599a03eb8: 0x81c03ec8 0xffffffff
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190412152652.827-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This gives us the consistent 'Error:' prefix added in 66363e9a43,
which helps users like libvirt who still need to scrape hmp error
messages to detect failure.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-Id: <984634226fa14316641f31f84e7dd0bb770bd94c.1556141033.git.crobinso@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with bs->drv = NUL
- vmdk: Set vmdk parent backing_format to vmdk
- qcow2: Preallocation fixes (especially for external data files)
- Add linear-buffer-based APIs (as wrappers around qiov-based ones)
- Various code cleanups and small corner case fixes
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJcyGstAAoJEH8JsnLIjy/WyqEQAKgKSGg8rWZ5B94VkwswuIzi
Mabz41KJg3kfIzPIhFWxNUE3kjWnrozExbyRc/LWIQRWwE44SANO+lVU4k1fzVDO
1ilP4FZ2eUv4CTnhZaELXIKXuhdKPiDq9CkWeQQpRxBSXJqlZsEhEABEX/goVU/0
mxmDmIWd8sQxtRYRDJwYHCBbTAGanzDHfmba970HtbPQUHNRQKhbvwP03MoSBf33
DCG5r5tZu+VwBv2dsfXOrMj80FJlpaEcALKe0hYboh+lklY7G7vUo/gAVtCrbC2V
6rYHcEYopdp5/pIQSMieYVvwe01SFjX4B6Q68cdWMYWxX+LRP7wv6dM2KDY1Woql
Ngi/3kVt1UzRNGe9n+T9N4Ye9rI3ITbD4Nn5hP1E32kpqzEA1Y/AizWjrfQyQScp
69po8Ih7EH9IPtW0PwQvlL2YrqAiJHKiTm+fxBTCYbrPk3ThBHxsTXS80uVbbtvy
V9EzUuIhugzv7a7cKNG1h4cpCNUl/D3VdD+SIT35miegM/kyoiwYF4R7jUbtoNRT
BC6A+znkH1qHBtwIFfzQnqyjcqFz6Zi3auSUyJBlKPCMfiIpaTkuDn91EA5R/SyE
VHpnrTtWzfjrWYMGYWFCb+Q/JRSJvLuwpimQODVKNwCqcGLGPtbZvzqqR6kNfdoK
6ukmGysLCqa7uAO/UC+0
=ZVvj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- iotests: Fix output of qemu-io related tests
- Don't ignore bdrv_set_aio_context() for nodes with bs->drv = NUL
- vmdk: Set vmdk parent backing_format to vmdk
- qcow2: Preallocation fixes (especially for external data files)
- Add linear-buffer-based APIs (as wrappers around qiov-based ones)
- Various code cleanups and small corner case fixes
# gpg: Signature made Tue 30 Apr 2019 16:35:09 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (27 commits)
block/qed: add missed coroutine_fn markers
iotests: Check that images are in read-only mode after block-commit
commit: Make base read-only if there is an early failure
qemu-img: use buffer-based io
block/stream: use buffer-based io
block/commit: use buffer-based io
block/backup: use buffer-based io
block/parallels: use buffer-based io
block/qed: use buffer-based io
block/qcow: use buffer-based io
block/qcow2: use buffer-based io
block: introduce byte-based io helpers
qcow2: Fix error handling in the compression code
qcow2: Fix qcow2_make_empty() with external data file
qemu-img: Make create hint at protocol options
iotests: Perform the correct test in 082
qcow2: Fix full preallocation with external data file
qcow2: Add errp to preallocate_co()
qcow2: Avoid COW during metadata preallocation
qemu-img: Saner printing of large file sizes
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qed_read_table and qed_write_table use coroutine-only interfaces but
are not marked coroutine_fn. Happily, they are called only from
coroutine context, so we only need to add missed markers.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
You can reproduce this by passing an invalid filter-node-name (like
"1234") to block-commit. In this case the base image is put in
read-write mode but is never reset back to read-only.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move to _co_ versions of io functions qed_read_table() and
qed_write_table(), as we use qemu_co_mutex_unlock()
anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch fixes a few things in the way error codes are handled in
the qcow2 compression code:
a) qcow2_co_pwritev_compressed() expects qcow2_co_compress() to only
return -1 or -2 on failure, but this is not correct. Since the
change from qcow2_compress() to qcow2_co_compress() in commit
ceb029cd6f the new code can also return -EINVAL (although
there does not seem to exist any code path that would cause that
error in the current implementation).
b) -1 and -2 are ad-hoc error codes defined in qcow2_compress().
This patch replaces them with standard constants from errno.h.
c) Both qcow2_compress() and qcow2_co_do_compress() return a negative
value on failure, but qcow2_co_pwritev_compressed() stores the
value in an unsigned data type.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
make_completely_empty() is an optimisated path for bdrv_make_empty()
where completely new metadata is created inside the image file instead
of going through all clusters and discarding them. For an external data
file, however, we actually need to do discard operations on the data
file; just overwriting the qcow2 file doesn't get rid of the data.
The necessary slow path with an explicit discard operation already
exists for other cases. Use it for external data files, too.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
