Maintain a list of faulted addresses on the destination host for which we're
waiting on. This is implemented using a GTree rather than a real list to make
sure even there're plenty of vCPUs/threads that are faulting, the lookup will
still be fast with O(log(N)) (because we'll do that after placing each page).
It should bring a slight overhead, but ideally that shouldn't be a big problem
simply because in most cases the requested page list will be short.
Actually we did similar things for postcopy blocktime measurements. This patch
didn't use that simply because:
(1) blocktime measurement is towards vcpu threads only, but here we need to
record all faulted addresses, including main thread and external
thread (like, DPDK via vhost-user).
(2) blocktime measurement will require UFFD_FEATURE_THREAD_ID, but here we
don't want to add that extra dependency on the kernel version since not
necessary. E.g., we don't need to know which thread faulted on which
page, we also don't care about multiple threads faulting on the same
page. But we only care about what addresses are faulted so waiting for a
page copying from src.
(3) blocktime measurement is not enabled by default. However we need this by
default especially for postcopy recover.
Another thing to mention is that this patch introduced a new mutex to serialize
the receivedmap and the page_requested tree, however that serialization does
not cover other procedures like UFFDIO_COPY.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-4-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It'll be used in follow up patches to access more fields out of it. Meanwhile
fetch the userfaultfd inside the function.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Bihong Yu <yubihong@huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1603163448-27122-4-git-send-email-yubihong@huawei.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We duplicated the logic of maintaining the last_rb variable at both callers of
this function. Pass *rb pointer into the function so that we can avoid
duplicating the logic. Also, when we have the rb pointer, it's also easier to
remove the original 2nd & 4th parameters, because both of them (name of the
ramblock when needed, or the page size) can be fetched from the ramblock
pointer too.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200908203022.341615-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the migration folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200917075029.313-3-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This function returns a boolean success and we're returning -1;
lets just use the 'out' error path.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixes: 58b7c17e22 ("Disable mlock around incoming postcopy")
Buglink: https://bugs.launchpad.net/qemu/+bug/1885720
Message-Id: <20200701093557.130096-1-dgilbert@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Function postcopy_ram_incoming_setup and postcopy_ram_incoming_cleanup
is a pair. Rename to make it clear for audience.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191010011316.31363-2-richardw.yang@linux.intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There are two places to call function postcopy_ram_incoming_cleanup()
postcopy_ram_listen_thread on migration success
loadvm_postcopy_handle_listen one setup failure
On success, the vm will never accept another migration. On failure,
PostcopyState is transited from LISTENING to END and would be checked in
qemu_loadvm_state_main(). If PostcopyState is RUNNING, migration would
be paused and retried.
Currently PostcopyState is set to END in function
postcopy_ram_incoming_cleanup(). With above analysis, we can take this
step out and postpone this till the end of listen thread to indicate the
listen thread is done.
This is a preparation patch for later cleanup.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191006000249.29926-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up in merge to the 1 parameter postcopy_state_set
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005220517.24029-3-richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
postcopy_ram_incoming_setup() and postcopy_ram_incoming_cleanup() are
counterpart. It is reasonable to map/unmap large zero page in these two
functions respectively.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191005135021.21721-3-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
During migration, a tmp page is allocated so that we could place a whole
host page during postcopy.
Currently the page is allocated during load stage, this is a little bit
late. And more important, if we failed to allocate it, the error is not
checked properly. Even it is NULL, we would still use it.
This patch moves the allocation to setup stage and if failed error
message would be printed and caller would notice it.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=eSUz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging
Header cleanup patches for 2019-08-13
# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
Include sysemu/sysemu.h a lot less
Clean up inclusion of sysemu/sysemu.h
numa: Move remaining NUMA declarations from sysemu.h to numa.h
Include sysemu/hostmem.h less
numa: Don't include hw/boards.h into sysemu/numa.h
Include hw/boards.h a bit less
Include hw/qdev-properties.h less
Include qemu/main-loop.h less
Include qemu/queue.h slightly less
Include hw/hw.h exactly where needed
Include qom/object.h slightly less
Include exec/memory.h slightly less
Include migration/vmstate.h less
migration: Move the VMStateDescription typedef to typedefs.h
Clean up inclusion of exec/cpu-common.h
Include hw/irq.h a lot less
typedefs: Separate incomplete types and function types
ide: Include hw/ide/internal a bit less outside hw/ide/
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop unnecessary inclusions from headers. Downgrade a few more to
exec/hwaddr.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
In postcopy-ram.c, we provide three functions to discard certain
RAMBlock range:
* postcopy_discard_send_init()
* postcopy_discard_send_range()
* postcopy_discard_send_finish()
Currently, we allocate/deallocate PostcopyDiscardState for each RAMBlock
on sending discard information to destination. This is not necessary and
the same data area could be reused for each RAMBlock.
This patch defines PostcopyDiscardState a static variable. By doing so:
1) avoid memory allocation and deallocation to the system
2) avoid potential failure of memory allocation
3) hide some details for their users
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190724010721.2146-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Basically, the context could get the MachineState reference via call
chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode.
A local variable of the same name would be introduced in the declaration
phase out of less effort OR replace it on the spot if it's only used
once in the context. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If ignore-shared capability is set then skip shared RAMBlocks during the
RAM migration.
Also, move qemu_ram_foreach_migratable_block (and rename) to the
migration code, because it requires access to the migration capabilities.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-4-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Currently, qemu_ram_foreach_* calls RAMBlockIterFunc with many
block-specific arguments. But often iter func needs RAMBlock*.
This refactoring is needed for fast access to RAMBlock flags from
qemu_ram_foreach_block's callback. The only way to achieve this now
is to call qemu_ram_block_from_host (which also enumerates blocks).
So, this patch reduces complexity of
qemu_ram_foreach_block() -> cb() -> qemu_ram_block_from_host()
from O(n^2) to O(n).
Fix RAMBlockIterFunc definition and add some functions to read
RAMBlock* fields witch were passed.
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Message-Id: <20190215174548.2630-2-yury-kotov@yandex-team.ru>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Call postcopy_ram_incoming_cleanup() to do the cleanup when
postcopy_ram_enable_notify fails. Besides, report the error
message when qemu_ram_foreach_migratable_block() fails.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Fei Li <fli@suse.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190113140849.38339-5-lifei1214@126.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
POSTCOPY_NOTIFY_INBOUND_END handlers will remove userfault fds
from the postcopy_remote_fds array which could be still in
use by the fault thread. Let's stop the thread before
notification to avoid possible accessing wrong memory.
Fixes: 46343570c0 ("vhost+postcopy: Wire up POSTCOPY_END notify")
Cc: qemu-stable@nongnu.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Message-Id: <20181008160536.6332-2-i.maximets@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
While the qemu_balloon_inhibit() interface appears rather general purpose,
postcopy uses it in a last-caller-wins approach with no guarantee of balanced
inhibits and de-inhibits. Wrap postcopy's usage of the inhibitor to give it
one vote overall, using the same last-caller-wins approach as previously
implemented at the balloon level.
Fixes: 01ccbec7bd ("balloon: Allow multiple inhibit users")
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch implements bi-directional RDMA QIOChannel. Because different
threads may access RDMAQIOChannel currently, this patch use RCU to protect it.
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Not needed. Don't expose last_ram_page().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180620202736.21399-1-david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On the POWER9 processor, the XIVE interrupt controller can control
interrupt sources using MMIO to trigger events, to EOI or to turn off
the sources. Priority management and interrupt acknowledgment is also
controlled by MMIO in the presenter sub-engine.
These MMIO regions are exposed to guests in QEMU with a set of 'ram
device' memory mappings, similarly to VFIO, and the VMAs are populated
dynamically with the appropriate pages using a fault handler.
But, these regions are an issue for migration. We need to discard the
associated RAMBlocks from the RAM state on the source VM and let the
destination VM rebuild the memory mappings on the new host in the
post_load() operation just before resuming the system.
To achieve this goal, the following introduces a new RAMBlock flag
RAM_MIGRATABLE which is updated in the vmstate_register_ram() and
vmstate_unregister_ram() routines. This flag is then used by the
migration to identify RAMBlocks to discard on the source. Some checks
are also performed on the destination to make sure nothing invalid was
sent.
This change impacts the boston, malta and jazz mips boards for which
migration compatibility is broken.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Allows the fault thread to stop handling page faults temporarily. When
network failure happened (and if we expect a recovery afterwards), we
should not allow the fault thread to continue sending things to source,
instead, it should halt for a while until the connection is rebuilt.
When the dest main thread noticed the failure, it kicks the fault thread
to switch to pause state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-7-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch provides blocktime calculation per vCPU,
as a summary and as a overlapped value for all vCPUs.
This approach was suggested by Peter Xu, as an improvements of
previous approch where QEMU kept tree with faulted page address and cpus bitmask
in it. Now QEMU is keeping array with faulted page address as value and vCPU
as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps
list for blocktime per vCPU (could be traced with page_fault_addr)
Blocktime will not calculated if postcopy_blocktime field of
MigrationIncomingState wasn't initialized.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-4-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch adds request to kernel space for UFFD_FEATURE_THREAD_ID, in
case this feature is provided by kernel.
PostcopyBlocktimeContext is encapsulated inside postcopy-ram.c,
due to it being a postcopy-only feature.
Also it defines PostcopyBlocktimeContext's instance live time.
Information from PostcopyBlocktimeContext instance will be provided
much after postcopy migration end, instance of PostcopyBlocktimeContext
will live till QEMU exit, but part of it (vcpu_addr,
page_fault_vcpu_time) used only during calculation, will be released
when postcopy ended or failed.
To enable postcopy blocktime calculation on destination, need to
request proper compatibility (Patch for documentation will be at the
tail of the patch set).
As an example following command enable that capability, assume QEMU was
started with
-chardev socket,id=charmonitor,path=/var/lib/migrate-vm-monitor.sock
option to control it
[root@host]#printf "{\"execute\" : \"qmp_capabilities\"}\r\n \
{\"execute\": \"migrate-set-capabilities\" , \"arguments\": {
\"capabilities\": [ { \"capability\": \"postcopy-blocktime\", \"state\":
true } ] } }" | nc -U /var/lib/migrate-vm-monitor.sock
Or just with HMP
(qemu) migrate_set_capability postcopy-blocktime on
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-3-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix leak spotted by ASAN:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7fe1abb80a38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
#1 0x7fe1aaf1bf75 in g_malloc0 ../glib/gmem.c:124
#2 0x7fe1aaf1c249 in g_malloc0_n ../glib/gmem.c:355
#3 0x55f4841cfaa9 in postcopy_ram_fault_thread /home/elmarco/src/qemu/migration/postcopy-ram.c:596
#4 0x55f48479447b in qemu_thread_start /home/elmarco/src/qemu/util/qemu-thread-posix.c:504
#5 0x7fe1a043550a in start_thread (/lib64/libpthread.so.0+0x750a)
Regression introduced with commit 00fa4fc85b.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180321113644.21899-1-marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that we have the mechanisms in here, allow shared memory in a
postcopy.
Note that QEMU can't tell who all the users of shared regions are
and thus can't tell whether all the users of the shared regions
have appropriate support for postcopy. Those devices that explicitly
support shared memory (e.g. vhost-user) must check, but it doesn't
stop weirder configurations causing problems.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Wire up a call to VHOST_USER_POSTCOPY_END message to the vhost clients
right before we ask the listener thread to shutdown.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cause the vhost-user client to be woken up whenever:
a) We place a page in postcopy mode
b) We get a fault and the page has already been received
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a hook to allow a client userfaultfd to be 'woken'
when a page arrives, and a walker that calls that
hook for relevant clients given a RAMBlock and offset.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to send a 'wake' request on a userfaultfd for
a shared process.
The address in the clients address space is specified together
with the RAMBlock it was resolved to.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide a helper to be used by shared waker functions to request
shared pages from the source.
The last_rb pointer is moved into the incoming state since this
helper can update it as well as the main fault thread function.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow other userfaultfd's to be registered into the fault thread
so that handlers for shared memory can get responses.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a notifier chain for postcopy with a 'reason' flag
and an opportunity for a notifier member to return an error.
Call it when enabling postcopy.
This will initially used to enable devices to declare they're unable
to postcopy and later to notify of devices of stages within postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use a flag on the RAMBlock to state whether it has the
UFFDIO_ZEROPAGE capability, use it when it's available.
This allows the use of postcopy on tmpfs as well as hugepage
backed files.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A general helper to notify the fault thread.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It was only used for quitting the page fault thread before. Let it be
something more useful - now we can use it to notify a "wake" for the
page fault thread (for any reason), and it only means "quit" if the
fault_thread_quit is set.
Since we changed what it does, renaming it to userfault_event_fd.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180208103132.28452-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch provides blocktime calculation per vCPU,
as a summary and as a overlapped value for all vCPUs.
This approach was suggested by Peter Xu, as an improvements of
previous approch where QEMU kept tree with faulted page address and cpus bitmask
in it. Now QEMU is keeping array with faulted page address as value and vCPU
as index. It helps to find proper vCPU at UFFD_COPY time. Also it keeps
list for blocktime per vCPU (could be traced with page_fault_addr)
Blocktime will not calculated if postcopy_blocktime field of
MigrationIncomingState wasn't initialized.
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch adds request to kernel space for UFFD_FEATURE_THREAD_ID, in
case this feature is provided by kernel.
PostcopyBlocktimeContext is encapsulated inside postcopy-ram.c,
due to it being a postcopy-only feature.
Also it defines PostcopyBlocktimeContext's instance live time.
Information from PostcopyBlocktimeContext instance will be provided
much after postcopy migration end, instance of PostcopyBlocktimeContext
will live till QEMU exit, but part of it (vcpu_addr,
page_fault_vcpu_time) used only during calculation, will be released
when postcopy ended or failed.
To enable postcopy blocktime calculation on destination, need to
request proper compatibility (Patch for documentation will be at the
tail of the patch set).
As an example following command enable that capability, assume QEMU was
started with
-chardev socket,id=charmonitor,path=/var/lib/migrate-vm-monitor.sock
option to control it
[root@host]#printf "{\"execute\" : \"qmp_capabilities\"}\r\n \
{\"execute\": \"migrate-set-capabilities\" , \"arguments\": {
\"capabilities\": [ { \"capability\": \"postcopy-blocktime\", \"state\":
true } ] } }" | nc -U /var/lib/migrate-vm-monitor.sock
Or just with HMP
(qemu) migrate_set_capability postcopy-blocktime on
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This patch adds ability to track down already received
pages, it's necessary for calculation vCPU block time in
postcopy migration feature, and for recovery after
postcopy migration failure.
Also it's necessary to solve shared memory issue in
postcopy livemigration. Information about received pages
will be transferred to the software virtual bridge
(e.g. OVS-VSWITCHD), to avoid fallocate (unmap) for
already received pages. fallocate syscall is required for
remmaped shared memory, due to remmaping itself blocks
ioctl(UFFDIO_COPY, ioctl in this case will end with EEXIT
error (struct page is exists after remmap).
Bitmap is placed into RAMBlock as another postcopy/precopy
related bitmaps.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
