Import list of syscalls from the kernel source. Conditionalize code/data
that is only used with softmmu. Implement exception handlers. Implement
signal hander (only the core registers for now, no coprocessors or TIE).
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- emit TCG barriers for MEMW, EXTW, S32RI and L32AI;
- do atomic_cmpxchg_i32 for S32C1I.
Cc: Emilio G. Cota <cota@braap.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
System emulation should provide access to all registers, userspace
emulation should only provide access to unprivileged registers.
Record register flags from GDB register map definition, calculate both
num_regs and num_core_regs if either is zero. Use num_regs in system
emulation, num_core_regs in userspace emulation gdbstub.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
As cpu.h is another typically widely included file which doesn't need
full access to the softfloat API we can remove the includes from here
as well. Where they do need types it's typically for float_status and
the rounding modes so we move that to softfloat-types.h as well.
As a result of not having softfloat in every cpu.h call we now need to
add it to various helpers that do need the full softfloat.h
definitions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[For PPC parts]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Define default core for noMMU configurations and use that core as
machine default with noMMU XTFPGA machines.
This is done to avoid offering non-working configuration (MMU core on a
noMMU machine) as a default.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
GPIO32 is not in the core ISA, but it was widely used in Diamond Cores.
This implementation doesn't do actual I/O and doesn't handle the case of
GPIO32 state being a part of coprocessor.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add two special registers: MMID and DDR:
- MMID is write-only and the only side effect of writing to it is output
to the trace port, which is not emulated;
- DDR is only accessible in debug mode, which is not emulated.
Add two debug-mode-only opcodes:
- rfdd and rfdo do return from the debug mode, which is not emulated.
Add three internal opcodes for full MMU:
- hwwdtlba and hwwitlba are the internal opcodes that write a value into
autoupdate DTLB or ITLB entry.
- ldpte is internal opcode that loads PTE entry that covers the most
recent page fault address.
None of these three opcodes may appear in a valid instruction.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Replace manual opcode analysis with libisa-based code. This makes it
possible to support variable-encoding instructions of the core ISA, like
const16, and will allow to support advanced Xtensa features, like FLIX
and TIE.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
FPU2000 implements basic single-precision floating point operations and
can be replaced with a different implementation, like DFPU or HiFi. Move
FPU2000 opcode translators into separate functions and list them in a
separate array.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move implementations of core opcodes into separate translation
functions. Introduce data structures for mapping opcode name to
translator function. Make an array of core opcode/translator structures.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
use new XTENSA_CPU_TYPE_NAME to compose CPU type name
to bring xtensa in line with all other targets that
will similar macro.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1507211474-188400-25-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
call xtensa_irq_init() at realize time which makes
cpu_xtensa_init() like generic cpu creation function.
As result we can replace it with cpu_generic_init()
which does the same job, reducing code duplication a bit.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1503592308-93913-16-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In semihosting mode QEMU allows guest to read and write host file
descriptors directly, including descriptors 0..2, a.k.a. stdin, stdout
and stderr. Sometimes it's desirable to have semihosting console
controlled by -serial option, e.g. to connect it to network.
Add semihosting console to xtensa-semi.c, open it in the 'sim' machine
in the presence of -serial option and direct stdout and stderr to it
when it's present.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa core may have a number of RAM and ROM areas configured. Record
their size and location from the core configuration overlay and
instantiate them as RAM regions in the SIM machine.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
RER and WER are privileged instructions for accessing external
registers. External register address space is local to processor core.
There's no alignment requirements, addressable units are 32-bit wide
registers.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Delimit each instruction that may access timers or IRQ state with
qemu_io_start/qemu_io_end, so that qemu-system-xtensa could be run with
-icount option.
Raise EXCP_YIELD after CCOMPARE reprogramming to let tcg_cpu_exec
recalculate how long this CPU is allowed to run.
RSR now may need to terminate TB, but it can't be done in RSR handler
because the same handler is used for XSR together with WSR handler, which
may also need to terminate TB. Change RSR and WSR handlers return type
to bool indicating whether TB termination is needed (RSR) or has been
done (WSR), and add TB termination after RSR/WSR dispatcher call.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa cores may have a register (CCOUNT) that counts core clock cycles.
It may also have a number of registers (CCOMPAREx); when CCOUNT value
passes the value of CCOMPAREx, timer interrupt x is raised.
Currently xtensa target counts a number of completed instructions and
assumes that for CCOUNT one instruction takes one cycle to complete.
It calls helper function to update CCOUNT register at every TB end and
raise timer interrupts. This scheme works very predictably and doesn't
have noticeable performance impact, but it is hard to use with multiple
synchronized processors, especially with coming MTTCG.
Derive CCOUNT from the virtual simulation time, QEMU_CLOCK_VIRTUAL.
Use native QEMU timers for CCOMPARE timers, one timer for each register.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
RUNSTALL signal stalls core execution while it's applied. It is widely
used in multicore configurations to control activity of additional
cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa cores may have two distinct addresses for the static vectors
group. Provide a function to select one of them.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
