We should not wire IRQs on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213130341.1793-6-philmd@linaro.org>
This is a preparation for implementing relocation and toggling of SuperI/O
functions in the VT8231 device model. Upon reset, all SuperI/O functions will be
deactivated, so in case if no -bios is given, let the machine configure those
functions the same way Pegasos II firmware would do.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20240114123911.4877-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The character "+" is now forbidden in QOM device names (see commit
b447378e12 - "Limit type names to alphanumerical and some few special
characters"). For the "power5+" and "power7+" CPU names, there is
currently a hack in type_name_is_valid() to still allow them for
compatibility reasons. However, there is a much nicer solution for this:
Simply use aliases! This way we can still support the old names without
the need for the ugly hack in type_name_is_valid().
Message-ID: <20240117141054.73841-2-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avoid directly referencing nd_table[] by first instantiating any
spapr-vlan devices using a qemu_get_nic_info() loop, then calling
pci_init_nic_devices() to do the rest.
No functional change intended.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Previously, the first PCI NIC would be placed in PCI slot 3 and the rest
would be dynamically assigned. Even if the user overrode the default NIC
type and made it something other than PCNet.
Now, the first PCNet NIC (that is, anything not explicitly specified
to be anything different) will go to slot 3 even if it isn't the first
NIC specified on the command line. And anything else will be dynamically
assigned.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The name "iothread" is overloaded. Use the term Big QEMU Lock (BQL)
instead, it is already widely used and unambiguous.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Big QEMU Lock (BQL) has many names and they are confusing. The
actual QemuMutex variable is called qemu_global_mutex but it's commonly
referred to as the BQL in discussions and some code comments. The
locking APIs, however, are called qemu_mutex_lock_iothread() and
qemu_mutex_unlock_iothread().
The "iothread" name is historic and comes from when the main thread was
split into into KVM vcpu threads and the "iothread" (now called the main
loop thread). I have contributed to the confusion myself by introducing
a separate --object iothread, a separate concept unrelated to the BQL.
The "iothread" name is no longer appropriate for the BQL. Rename the
locking APIs to:
- void bql_lock(void)
- void bql_unlock(void)
- bool bql_locked(void)
There are more APIs with "iothread" in their names. Subsequent patches
will rename them. There are also comments and documentation that will be
updated in later patches.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Fabiano Rosas <farosas@suse.de>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Acked-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-id: 20240102153529.486531-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The 'start-powered-off' property has been added to ARM CPUs in
commit 5de164304a ("arm: Allow secondary KVM CPUs to be booted
via PSCI"), then eventually got generalized to all CPUs in commit
c1b701587e ("target/arm: Move start-powered-off property to generic
CPUState"). Since all CPUs have it, no need to check whether it is
available. Updating this property can't fail, so use &error_abort.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20231123143813.42632-5-philmd@linaro.org>
CPUState::start_powered_off field is part of the internal
implementation of a QDev CPU. It is exposed as the QDev
"start-powered-off" property. External components should
use the qdev properties API to access it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20231123143813.42632-2-philmd@linaro.org>
This variable is about the host OS, not the target. It is used a lot
more since the Meson conversion, but the original sin dates back to 2003.
Time to fix it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_DARWIN, CONFIG_LINUX and CONFIG_BSD are used in some rules, but
only CONFIG_LINUX has substantial use. Convert them all to if...endif.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
-----BEGIN PGP SIGNATURE-----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=TA1/
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu into staging
* Add compat machines for QEMU 9.0
* Some header clean-ups by Philippe
* Restrict type names to alphanumerical range (and a few special characters)
* Fix analyze-migration.py script on s390x
* Clean up and improve some tests
* Document handling of commas in CLI options parameters
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmWCtYsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbWLnw//cNJrxG0V+j0iakX+C7HRumVrLBDI4KYY
# Cp2Hx92SyeQ0Kk8DJS6JueTV0SLjMsV77APu2YPH7ELmPlk+CB9gqmV7xVoYNvsm
# QbRPlIjFw8MHLekadc2A+C+pn48tWACoOdBEDIfazKrxybnf0B57RC/fIfMKHjbs
# 2ALCoFbbgphs7yWuzTHK8ayKaGMhUVkWfzHQwpnq899olHyZBhkl951uKJA6VmLx
# KvggePkpszLjmmXA8MH1hDCcizki31cB0ZKTbQFCyE42s2S3Hvg0GueU90O7Y1cj
# lS5tPVQxyEhUYMLL+/hudlf2OYqVn2BalB7ieUQIy6rG8yoc9zxfIKQi0ccl+2oA
# s8HRq5S0bSjtilQogU1LQL/Gk6W1/N9MmnhKvCGB+BTK5KX7s4EQk02y9gGZm/8s
# pMErMyaXTG4dLiTAK42VgMVDqCYvzBmE+Gj91OmoUR7fb+VMrsWxeBFxMPDn+VtL
# TMJegIFsjw2QCSitcU4v+nP0qtKgXGbuZtrGXKabrxH5PmeQFJDSM7TwpTK4qvjK
# QMIQKBbz8BfJnUzN8qAaaJEpp1T5tcMJClKtfcgxq/+VyaSaHLmD0cljqBC+g+y7
# FTo+fa7oYx44sAlqapdEXBSGn4T+J26iuCef13CCCiPfYBv/tk3b2E0AWHj4y58I
# +VpInjUaPBQ=
# =TA1/
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 20 Dec 2023 04:36:11 EST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-12-20' of https://gitlab.com/thuth/qemu:
tests/unit/test-qmp-event: Replace fixture by global variables
tests/unit/test-qmp-event: Simplify event emission check
tests/unit/test-qmp-event: Drop superfluous mutex
tests/qtest/npcm7xx_pwm-test: Only do full testing in slow mode
qemu-options: Clarify handling of commas in options parameters
tests/qtest/migration-test: Fix analyze-migration.py for s390x
qom/object: Limit type names to alphanumerical and some few special characters
tests/unit/test-io-task: Rename "qemu:dummy" to avoid colon in the name
memory: Remove "qemu:" prefix from the "qemu:ram-discard-manager" type name
hw: Replace anti-social QOM type names (again)
docs/system/arm: Fix for rename of type "xlnx.bbram-ctrl"
target: Restrict 'sysemu/reset.h' to system emulation
hw/s390x/ipl: Remove unused 'exec/exec-all.h' included header
hw/misc/mips_itu: Remove unnecessary 'exec/exec-all.h' header
hw/ppc/spapr_hcall: Remove unused 'exec/exec-all.h' included header
system/qtest: Restrict QTest API to system emulation
system/qtest: Include missing 'hw/core/cpu.h' header
MAINTAINERS: Add some more vmware-related files to the corresponding section
hw: Add compat machines for 9.0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231212113640.30287-2-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the legacy and iommufd backends were introduced, a set of common
vfio-pci routines were exported in pci.c for both backends to use :
vfio_pci_pre_reset
vfio_pci_get_pci_hot_reset_info
vfio_pci_host_match
vfio_pci_post_reset
This introduced a build failure on PPC when --without-default-devices
is use because VFIO is always selected in ppc/Kconfig but VFIO_PCI is
not.
Use an 'imply VFIO_PCI' in ppc/Kconfig and bypass compilation of the
VFIO EEH hooks routines defined in hw/ppc/spapr_pci_vfio.c with
CONFIG_VFIO_PCI.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Move the space field to the base object. Also the VFIOAddressSpace
now contains a list of base containers.
No functional change intended.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The machine uses a modified U-Boot under GPL license but the sources
of it are lost with only a binary available so it cannot be included
in QEMU. Allow running without the firmware image which can be used
when calling a boot loader directly and thus simplifying booting
guests. We need a small routine that AmigaOS calls from ROM which is
added in this case to allow booting AmigaOS without external firmware
image.
Fixes: d9656f860a ("hw/ppc: Add emulation of AmigaOne XE board")
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
The PNV I2C Controller was clearing the status register
after a reset without repopulating the "upper threshold
for I2C ports", "Command Complete" and the SCL/SDA input
level fields.
Fixed this for resets caused by a system reset as well
as from writing to the "Immediate Reset" register.
Fixes: 263b81ee15 ("ppc/pnv: Add an I2C controller model")
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PNV I2C engines for power9 and power10 were being assigned a base
XSCOM address that was off by one I2C engine's address range such
that engine 0 had engine 1's address and so on. The xscom address
assignment was being based on the device tree engine numbering, which
starts at 1. Rather than changing the device tree numbering to start
with 0, the addressing was changed to be based on the existing device
tree numbers minus one.
Fixes: 1ceda19c28 ("ppc/pnv: Connect PNV I2C controller to powernv10)
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Coverity warns that "i2c_bus_busy(i2c->busses[i]) << i" might overflow
because the expression is evaluated using 32-bit arithmetic and then
used in a context expecting a uint64_t.
While we are at it, introduce a PNV_I2C_MAX_BUSSES constant and check
the number of busses at realize time.
Fixes: Coverity CID 1523918
Cc: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When dynamic-reconfiguration is off, hot plug / unplug can fail with
"Bus 'spapr-pci-host-bridge' does not support hotplugging".
spapr-pci-host-bridge is a device, not a bus. Report the name of the
bus it provides instead: 'pci.0'.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031111059.3407803-2-armbru@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This queue, the last one before the 8.2 feature freeze, has miscellanous
changes that includes new PowerNV features and the new AmigaONE XE
board.
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZUqiORYcZGFuaWVsaGI0
MTNAZ21haWwuY29tAAoJEDzZypbeAzFkBSUA/2qm8CyrRqY5+tsjtWQqZmPZ3L1F
CgnXFNqtY2tzbTe5AQCi6FeQBEmXbZYVfryZyA+CQ4DUERc+18pe6hV3bBR9Cg==
=cnHS
-----END PGP SIGNATURE-----
Merge tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu into staging
ppc patch queue for 2023-11-07:
This queue, the last one before the 8.2 feature freeze, has miscellanous
changes that includes new PowerNV features and the new AmigaONE XE
board.
# -----BEGIN PGP SIGNATURE-----
#
# iIwEABYKADQWIQQX6/+ZI9AYAK8oOBk82cqW3gMxZAUCZUqiORYcZGFuaWVsaGI0
# MTNAZ21haWwuY29tAAoJEDzZypbeAzFkBSUA/2qm8CyrRqY5+tsjtWQqZmPZ3L1F
# CgnXFNqtY2tzbTe5AQCi6FeQBEmXbZYVfryZyA+CQ4DUERc+18pe6hV3bBR9Cg==
# =cnHS
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 08 Nov 2023 04:46:49 HKT
# gpg: using EDDSA key 17EBFF9923D01800AF2838193CD9CA96DE033164
# gpg: issuer "danielhb413@gmail.com"
# gpg: Good signature from "Daniel Henrique Barboza <danielhb413@gmail.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 17EB FF99 23D0 1800 AF28 3819 3CD9 CA96 DE03 3164
* tag 'pull-ppc-20231107' of https://gitlab.com/danielhb/qemu:
ppc: qtest already exports qtest_rtas_call()
hw/pci-host: Update PHB5 XSCOM registers
ppc/pnv: Fix number of I2C engines and ports for power9/10
ppc/pnv: Connect PNV I2C controller to powernv10
ppc/pnv: Connect I2C controller model to powernv9 chip
ppc/pnv: Add an I2C controller model
tests/avocado: Add test for amigaone board
hw/ppc: Add emulation of AmigaOne XE board
hw/pci-host: Add emulation of Mai Logic Articia S
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Having two functions with the same name is a bad idea. As spapr only
uses the function locally, made it static.
When you compile with clang, you get this compilation error:
/usr/bin/ld: tests/qtest/libqos/libqos.fa.p/.._libqtest.c.o: in function `qtest_rtas_call':
/scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/tests/qtest/libqtest.c:1195: multiple definition of `qtest_rtas_call'; libqemu-ppc64-softmmu.fa.p/hw_ppc_spapr_rtas.c.o:/scratch/qemu/clang/full/all/../../../../../mnt/code/qemu/full/hw/ppc/spapr_rtas.c:536: first defined here
clang-16: error: linker command failed with exit code 1 (use -v to see invocation)
ninja: build stopped: subcommand failed.
make: *** [Makefile:162: run-ninja] Error 1
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20231030163834.4638-1-quintela@redhat.com>
[dhb: remove 'spapr_rtas.h' include from spapr_rtas.c]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Power9 is supposed to have 4 PIB-connected I2C engines with the
following number of ports on each engine:
0: 2
1: 13
2: 2
3: 2
Power10 also has 4 engines but has the following number of ports
on each engine:
0: 14
1: 14
2: 2
3: 16
Current code assumes that they all have the same (maximum) number.
This can be a problem if software expects to see a certain number
of ports present (Power Hypervisor seems to care).
Fixed this by adding separate tables for power9 and power10 that
map the I2C controller number to the number of I2C buses that should
be attached for that engine.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Message-ID: <20231025152714.956664-1-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Wires up four I2C controller instances to the powernv10 chip
XSCOM address space.
Each controller instance is wired up to two I2C buses of
its own. No other I2C devices are connected to the buses
at this time.
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-ID: <20231017221434.810363-1-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Wires up three I2C controller instances to the powernv9 chip
XSCOM address space.
Each controller instance is wired up to a single I2C bus of
its own. No other I2C devices are connected to the buses
at this time.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[milesg: Split wiring from addition of model itself]
[milesg: Added new commit message]
[milesg: Moved hardcoded attributes into PnvChipClass]
[milesg: Removed TODO comment for I2C]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20231016222013.3739530-3-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The more recent IBM power processors have an embedded I2C
controller that is accessible by software via the XSCOM
address space.
Each instance of the I2C controller is capable of controlling
multiple I2C buses (one at a time). Prior to beginning a
transaction on an I2C bus, the bus must be selected by writing
the port number associated with the bus into the PORT_NUM
field of the MODE register. Once an I2C bus is selected,
the status of the bus can be determined by reading the
Status and Extended Status registers.
I2C bus transactions can be started by writing a command to
the Command register and reading/writing data from/to the
FIFO register.
Not supported :
. 10 bit I2C addresses
. Multimaster
. Slave
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[milesg: Split wiring to powernv9 into its own commit]
[milesg: Added more detail to commit message]
[milesg: Added SPDX Licensed Identifier to new files]
[milesg: updated copyright dates]
[milesg: Added use of g_autofree]
[milesg: Added NULL check after pnv_i2c_get_bus]
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <20231016222013.3739530-2-milesg@linux.vnet.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The AmigaOne is a rebranded MAI Teron board that uses U-Boot firmware
with patches to support AmigaOS and is very similar to pegasos2 so can
be easily emulated sharing most code with pegasos2. The reason to
emulate it is that AmigaOS comes in different versions for AmigaOne
and PegasosII which only have drivers for one machine and firmware so
these only run on the specific machine. Adding this board allows
another AmigaOS version to be used reusing already existing peagasos2
emulation. (The AmigaOne was the first of these boards so likely most
widespread which then inspired Pegasos that was later replaced with
PegasosII due to problems with Articia S, so these have a lot of
similarity. Pegasos mainly ran MorphOS while the PegasosII version of
AmigaOS was added later and therefore less common than the AmigaOne
version.)
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Acked-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-ID: <804935e7a5921548d630576159ae2c758fe6e275.1699382232.git.balaton@eik.bme.hu>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Inline and guard the single call to kvm_openpic_connect_vcpu()
allows to remove kvm-stub.c.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231003070427.69621-3-philmd@linaro.org>
With vfio_eeh_as_ok/vfio_eeh_as_op moved and made static,
vfio.h becomes empty and is deleted.
No functional changes intended.
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
This patch modifies pci_setup_iommu() to set PCIIOMMUOps
instead of setting PCIIOMMUFunc. PCIIOMMUFunc is used to
get an address space for a PCI device in vendor specific
way. The PCIIOMMUOps still offers this functionality. But
using PCIIOMMUOps leaves space to add more iommu related
vendor specific operations.
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Yi Sun <yi.y.sun@linux.intel.com>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hervé Poussineau <hpoussin@reactos.org>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: Matthew Rosato <mjrosato@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[ clg: - refreshed on latest QEMU
- included hw/remote/iommu.c
- documentation update
- asserts in pci_setup_iommu()
- removed checks on iommu_bus->iommu_ops->get_address_space
- included Elroy PCI host (PA-RISC) ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Current code does:
- register pre_2_10_vmstate_dummy_icp with "icp/server" and instance
dependinfg on cpu number
- for newer machines, it register vmstate_icp with "icp/server" name
and instance 0
- now it unregisters "icp/server" for the 1st instance.
This is wrong at many levels:
- we shouldn't have two VMSTATEDescriptions with the same name
- In case this is the only solution that we can came with, it needs to
be:
* register pre_2_10_vmstate_dummy_icp
* unregister pre_2_10_vmstate_dummy_icp
* register real vmstate_icp
Created vmstate_replace_hack_for_ppc() with warnings left and right
that it is a hack.
CC: Cedric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-8-quintela@redhat.com>
This are the easiest cases, where we were already using
VMSTATE_INSTANCE_ID_ANY.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-3-quintela@redhat.com>
Apparently l2sram_update_mappings() bit-rotted over time,
when defining MAP_L2SRAM we get:
hw/ppc/ppc440_uc.c:83:17: error: no member named 'isarc' in 'struct ppc4xx_l2sram_t'
if (l2sram->isarc != isarc ||
~~~~~~ ^
hw/ppc/ppc440_uc.c:84:18: error: no member named 'isacntl' in 'struct ppc4xx_l2sram_t'
(l2sram->isacntl & 0x80000000) != (isacntl & 0x80000000)) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:85:21: error: no member named 'isacntl' in 'struct ppc4xx_l2sram_t'
if (l2sram->isacntl & 0x80000000) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:88:50: error: no member named 'isarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->isarc_ram);
~~~~~~ ^
hw/ppc/ppc440_uc.c:93:50: error: no member named 'isarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->isarc_ram);
~~~~~~ ^
hw/ppc/ppc440_uc.c:96:17: error: no member named 'dsarc' in 'struct ppc4xx_l2sram_t'
if (l2sram->dsarc != dsarc ||
~~~~~~ ^
hw/ppc/ppc440_uc.c:97:18: error: no member named 'dsacntl' in 'struct ppc4xx_l2sram_t'
(l2sram->dsacntl & 0x80000000) != (dsacntl & 0x80000000)) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:98:21: error: no member named 'dsacntl' in 'struct ppc4xx_l2sram_t'
if (l2sram->dsacntl & 0x80000000) {
~~~~~~ ^
hw/ppc/ppc440_uc.c💯52: error: no member named 'dsarc' in 'struct ppc4xx_l2sram_t'
if (!(isacntl & 0x80000000) || l2sram->dsarc != isarc) {
~~~~~~ ^
hw/ppc/ppc440_uc.c:103:54: error: no member named 'dsarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->dsarc_ram);
~~~~~~ ^
hw/ppc/ppc440_uc.c:111:54: error: no member named 'dsarc_ram' in 'struct ppc4xx_l2sram_t'
&l2sram->dsarc_ram);
~~~~~~ ^
Remove that dead code.
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Modify migrate_add_blocker and migrate_del_blocker to take an Error **
reason. This allows migration to own the Error object, so that if
an error occurs in migrate_add_blocker, migration code can free the Error
and clear the client handle, simplifying client code. It also simplifies
the migrate_del_blocker call site.
In addition, this is a pre-requisite for a proposed future patch that would
add a mode argument to migration requests to support live update, and
maintain a list of blockers for each mode. A blocker may apply to a single
mode or to multiple modes, and passing Error** will allow one Error object
to be registered for multiple modes.
No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1697634216-84215-1-git-send-email-steven.sistare@oracle.com>
There is no point in exposing an internal MMIO region via
SysBus and directly mapping it in the very same device.
Just map it without using the SysBus API.
Transformation done using the following coccinelle script:
@@
expression sbdev;
expression index;
expression addr;
expression subregion;
@@
- sysbus_init_mmio(sbdev, subregion);
... when != sbdev
- sysbus_mmio_map(sbdev, index, addr);
+ memory_region_add_subregion(get_system_memory(), addr, subregion);
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20231019131647.19690-6-philmd@linaro.org>
There is no point in exposing an internal MMIO region via
SysBus and directly mapping it in the very same device.
Just map it without using the SysBus API.
Transformation done using the following coccinelle script:
@@
expression sbdev;
expression index;
expression addr;
expression subregion;
@@
- sysbus_init_mmio(sbdev, subregion);
... when != sbdev
- sysbus_mmio_map(sbdev, index, addr);
+ memory_region_add_subregion(get_system_memory(), addr, subregion);
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20231019131647.19690-5-philmd@linaro.org>
In order to make the next commit trivial, move sysbus_init_mmio()
calls just before the corresponding sysbus_mmio_map() calls.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20231019131647.19690-4-philmd@linaro.org>
pnv_xscom_realize() is not used to *realize* QDev object, rename
it as pnv_xscom_init(). The Error** argument is unused: remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20231019131647.19690-3-philmd@linaro.org>
qbus_new() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231019131647.19690-2-philmd@linaro.org>
* fix for KVM on Apple M2
* introduce machine property "audiodev"
* ui/vnc: Require audiodev= to enable audio
* audio: remove QEMU_AUDIO_* and -audio-help support
* audio: forbid using default audiodev backend with -audiodev and -nodefaults
* remove compatibility code for old machine types
* make-release: do not ship dtc sources
* build system cleanups
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUb0QgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOpnAf9EFXfGkXpqQ5Q8ZbVlVc5GQKofMHW
OZwamTBlp/c07+QcQiMxwLhIW0iyDhrfdCjoFSUaTA8O10FM1YrFv4SkUryYb9B3
bmoTl4NeLvmkxpC47GEeaaBfjyM0G/9Ip9Zsuqx3u+gSzwTbkEstA2u7gcsN0tL9
VlhMSiV82uHhRC/DJYLxr+8bRYSIm1AeuI8K/O1yags85Kztf3UiQUhePIKLznMH
BdORjD+i46xM1dE8ifpdsunm462cDWz/faAnIH0YVKBlshnQHXKTO+GDA/Fbfl51
wFfupZXo93wwgawS7elAUzI+gwaKCPRHA8NDcukeO91hTzk6i14y04u5SQ==
=nv64
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fix from optionrom build
* fix for KVM on Apple M2
* introduce machine property "audiodev"
* ui/vnc: Require audiodev= to enable audio
* audio: remove QEMU_AUDIO_* and -audio-help support
* audio: forbid using default audiodev backend with -audiodev and -nodefaults
* remove compatibility code for old machine types
* make-release: do not ship dtc sources
* build system cleanups
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUb0QgUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOpnAf9EFXfGkXpqQ5Q8ZbVlVc5GQKofMHW
# OZwamTBlp/c07+QcQiMxwLhIW0iyDhrfdCjoFSUaTA8O10FM1YrFv4SkUryYb9B3
# bmoTl4NeLvmkxpC47GEeaaBfjyM0G/9Ip9Zsuqx3u+gSzwTbkEstA2u7gcsN0tL9
# VlhMSiV82uHhRC/DJYLxr+8bRYSIm1AeuI8K/O1yags85Kztf3UiQUhePIKLznMH
# BdORjD+i46xM1dE8ifpdsunm462cDWz/faAnIH0YVKBlshnQHXKTO+GDA/Fbfl51
# wFfupZXo93wwgawS7elAUzI+gwaKCPRHA8NDcukeO91hTzk6i14y04u5SQ==
# =nv64
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 03 Oct 2023 04:30:00 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (24 commits)
audio: forbid default audiodev backend with -nodefaults
audio: propagate Error * out of audio_init
vt82c686 machines: Support machine-default audiodev with fallback
hw/ppc: Support machine-default audiodev with fallback
hw/arm: Support machine-default audiodev with fallback
Introduce machine property "audiodev"
audio: remove QEMU_AUDIO_* and -audio-help support
audio: simplify flow in audio_init
audio: commonize voice initialization
audio: return Error ** from audio_state_by_name
audio: allow returning an error from the driver init
audio: Require AudioState in AUD_add_capture
ui/vnc: Require audiodev= to enable audio
crypto: only include tls-cipher-suites in emulators
scsi-disk: ensure that FORMAT UNIT commands are terminated
esp: restrict non-DMA transfer length to that of available data
esp: use correct type for esp_dma_enable() in sysbus_esp_gpio_demux()
Makefile: build plugins before running TCG tests
meson: clean up static_library keyword arguments
make-release: do not ship dtc sources
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
