Commit Graph

1555 Commits

Author SHA1 Message Date
Richard Henderson
d0a851cc50 target/hppa: Implement LDWA
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
63300a00ab target/hppa: Implement P*TLB and P*TLBE insns
We now have all of the TLB manipulation instructions.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
8d6ae7fb3a target/hppa: Implement I*TLBA and I*TLBP insns
The TLB can now be populated, but it cannot yet be cleared.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
b36942a698 target/hppa: Log unimplemented instructions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
49c29d6c2e target/hppa: Implement the interval timer
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
4f5f254808 target/hppa: Implement external interrupts
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:26 -08:00
Richard Henderson
650cdb2a2e target/hppa: Implement tlb_fill
However since HPPA has a software-managed TLB, and the relevant
TLB manipulation instructions are not implemented, this does not
actually do anything.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:22:15 -08:00
Richard Henderson
c301f34e79 target/hppa: Implement IASQ
Any one TB will have only one space value.  If we change spaces,
we change TBs.  Thus BE and BEV must exit the TB immediately.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
660eefe1ca target/hppa: Avoid privilege level decrease during branches
These instructions force the destination privilege level
of the branch destination to be no higher than current.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
86f8d05fc0 target/hppa: Use space registers in data operations
This changes the system virtual address width to 64-bit and
incorporates the space registers into load/store operations.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
08aec8b53c target/hppa: Implement unaligned access trap
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
1a19da0da4 target/hppa: Fill in hppa_cpu_do_interrupt/hppa_cpu_exec_interrupt
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
f49b3537cb target/hppa: Implement rfi
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
7f221b0706 target/hppa: Adjust insn mask for mfctl,w
While the E bit is only used for pa2.0 mfctl,w from sar,
the otherwise reserved bit does not appear to be decoded.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
35136a77cb target/hppa: Add control registers
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
33423472f0 target/hppa: Add space registers
Not used where they should be yet, but we can copy them.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
e1b5a5ed6f target/hppa: Implement the system mask instructions
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
3d68ee7bbe target/hppa: Implement mmu_idx from IA privilege level
Most aspects of privilege are not yet handled.  But this
gives us the start from which to begin checking.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
eaa3783b68 target/hppa: Split address size from register size
For system mode, we will need 64-bit virtual addresses even when
we have 32-bit register sizes.  Since the rest of QEMU equates
TARGET_LONG_BITS with the address size, redefine everything
related to register size in terms of a new TARGET_REGISTER_BITS.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
2986721df7 target/hppa: Define hardware exception types
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
ba1d0b4482 target/hppa: Disable gateway page emulation for system mode
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Richard Henderson
fa57e3274d target/hppa: Define the rest of the PSW
We don't actually do anything with most of the bits yet,
but at least they have names and we have somewhere to
store them.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Helge Deller
813dff13bf target/hppa: Skeleton support for hppa-softmmu
With the addition of default-configs/hppa-softmmu.mak, this
will compile.  It is not enabled with this patch, however.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30 10:08:18 -08:00
Suraj Jitindar Singh
8acc2ae5e9 target/ppc/kvm: Add cap_ppc_safe_[cache/bounds_check/indirect_branch]
Add three new kvm capabilities used to represent the level of host support
for three corresponding workarounds.

Host support for each of the capabilities is queried through the
new ioctl KVM_PPC_GET_CPU_CHAR which returns four uint64 quantities. The
first two, character and behaviour, represent the available
characteristics of the cpu and the behaviour of the cpu respectively.
The second two, c_mask and b_mask, represent the mask of known bits for
the character and beheviour dwords respectively.

Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[dwg: Correct some compile errors due to name change in final kernel
 patch version]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-29 14:24:55 +11:00
Peter Maydell
fca3dad533 -----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaafR3AAoJEPMMOL0/L7483m4P/3GQil19zuj6EUbukR1kRv3T
 kYK9ciuGRkJ7qv3n16RgiobUREK8AziRiPi7fvC/T82wlhNbVIvOm/EQZj/yTlto
 Z18NLhYgSPu+zH6hymJVm/+ORpfXOzhgEZWXm2X6TIa+JMjXKdnn4+bxUCZSlnDM
 lQURK2XFv3F5didCMKDiFaAfWUFp3RUlfvo50n22hCIJa/GznsgHxnHbexHdrEXh
 NF5ES0pDMfoIG938XvLmJ6X8O+//G+02DrbRvsUBV948Lvx0bLCm7tiRC+kGRYmU
 i/QzcQzh6Zr2A4wR1WtItwQzYSJoJFp2/rxebXfNEPS5pMkR8UXtmtQ1WUMD2Xl3
 FITA5rHjw1W1pCOsq3vDkU4SyMjppKSyc8bA7iFHWSl/M1q7MHlx611TdMbYuXsX
 +GOOBVEYdD4VrLpTbcyYtA/fR1kJjPHDzdQx49mFLjPdVa+d5gXhxSJjRGPzvzgl
 O4WmARQvFyI6dumzYxVdYH2tJ2o5YCI17lv/HNcxlDXAW2Xa0peFqmxa/O1Bw6E3
 ayBixnIQUzAzS/fYfDtgWL2VyhruRiA0FTdW4OpXvdRRYsxmRFT1uzGMvAPSkBE2
 OSJmO0V/oRCHt/qmiMjCvDf/npo1GwRt/MADhGFa87d+D/gu6KlAzB1HhQ5t+yh4
 5vvbKRSK5Z2TZtUgniIA
 =YOpd
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-2.12-pull-request' into staging

# gpg: Signature made Thu 25 Jan 2018 15:15:03 GMT
# gpg:                using RSA key 0xF30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>"
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>"
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>"
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier/tags/m68k-for-2.12-pull-request:
  target/m68k: add HMP command "info tlb"
  target/m68k: add pflush/ptest
  target/m68k: add moves
  target/m68k: add index parameter to gen_load()/gen_store() and Co.
  target/m68k: add Transparent Translation
  target/m68k: add MC68040 MMU
  accel/tcg: add size paremeter in tlb_fill()
  target/m68k: fix TCG variable double free

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-26 10:08:53 +00:00
Laurent Vivier
2097dca6d3 target/m68k: add HMP command "info tlb"
Dump MMU state and address mappings.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-8-laurent@vivier.eu>
2018-01-25 16:02:25 +01:00
Laurent Vivier
e55886c334 target/m68k: add pflush/ptest
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-7-laurent@vivier.eu>
2018-01-25 16:02:25 +01:00
Laurent Vivier
5fa9f1f283 target/m68k: add moves
and introduce SFC and DFC control registers.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-6-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Laurent Vivier
54e1e0b5b5 target/m68k: add index parameter to gen_load()/gen_store() and Co.
The instruction "moves" can select source and destination
address space (user or kernel). This patch modifies
all the load/store functions to be able to provide
the address space the caller wants to use instead
of using the current one. All the callers are modified
to provide the default address space to these functions.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-5-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Laurent Vivier
c05c73b083 target/m68k: add Transparent Translation
Add ittr0, ittr1, dttr0, dttr1 and manage Transparent Translations

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-4-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Laurent Vivier
88b2fef6c3 target/m68k: add MC68040 MMU
Only add MC68040 MMU page table processing and related
registers (Special Status Word, Translation Control Register,
User Root Pointer and Supervisor Root Pointer).

Transparent Translation Registers, DFC/SFC and pflush/ptest
will be added later.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-3-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Laurent Vivier
98670d47cd accel/tcg: add size paremeter in tlb_fill()
The MC68040 MMU provides the size of the access that
triggers the page fault.

This size is set in the Special Status Word which
is written in the stack frame of the access fault
exception.

So we need the size in m68k_cpu_unassigned_access() and
m68k_cpu_handle_mmu_fault().

To be able to do that, this patch modifies the prototype of
handle_mmu_fault handler, tlb_fill() and probe_write().
do_unassigned_access() already includes a size parameter.

This patch also updates handle_mmu_fault handlers and
tlb_fill() of all targets (only parameter, no code change).

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Laurent Vivier
39e3e113bd target/m68k: fix TCG variable double free
t64 is also unconditionally freed after the switch () { ... }

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180119114444.7590-1-laurent@vivier.eu>
2018-01-25 16:02:24 +01:00
Richard Henderson
55faa21273 target/arm: Simplify fp_exception_el for user-only
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:29 +00:00
Richard Henderson
b9adaa70a0 target/arm: Hoist store to flags output in cpu_get_tb_cpu_state
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-15-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:29 +00:00
Richard Henderson
a9e013112f target/arm: Move cpu_get_tb_cpu_state out of line
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-14-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:29 +00:00
Richard Henderson
0d0a16c647 target/arm: Add ARM_FEATURE_SVE
Not enabled anywhere so far.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-11-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:29 +00:00
Richard Henderson
9a2b5256ea target/arm: Add aa{32, 64}_vfp_{dreg, qreg} helpers
Helpers that return a pointer into env->vfp.regs so that we isolate
the logic of how to index the regs array for different cpu modes.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-7-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:29 +00:00
Richard Henderson
3f68b8a5a6 target/arm: Change the type of vfp.regs
All direct users of this field want an integral value.  Drop all
of the extra casting between uint64_t and float64.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-6-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:28 +00:00
Richard Henderson
e7c06c4e4c target/arm: Use pointers in neon tbl helper
Rather than passing a regno to the helper, pass pointers to the
vector register directly.  This eliminates the need to pass in
the environment pointer and reduces the number of places that
directly access env->vfp.regs[].

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-5-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:28 +00:00
Richard Henderson
b13708bbbd target/arm: Use pointers in neon zip/uzp helpers
Rather than passing regnos to the helpers, pass pointers to the
vector registers directly.  This eliminates the need to pass in
the environment pointer and reduces the number of places that
directly access env->vfp.regs[].

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180119045438.28582-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:28 +00:00
Richard Henderson
1a66ac61af target/arm: Use pointers in crypto helpers
Rather than passing regnos to the helpers, pass pointers to the
vector registers directly.  This eliminates the need to pass in
the environment pointer and reduces the number of places that
directly access env->vfp.regs[].

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180119045438.28582-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:28 +00:00
Richard Henderson
cf96a68248 target/arm: Mark disas_set_insn_syndrome inline
If it isn't used when translate.h is included,
we'll get a compiler Werror.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180119045438.28582-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:28 +00:00
Ard Biesheuvel
9aea1ea31a target/arm: Fix 32-bit address truncation
Commit ("3b39d734141a target/arm: Handle page table walk load failures
correctly") modified both versions of the page table walking code (i.e.,
arm_ldl_ptw and arm_ldq_ptw) to record the result of the translation in
a temporary 'data' variable so that it can be inspected before being
returned. However, arm_ldq_ptw() returns an uint64_t, and using a
temporary uint32_t variable truncates the upper bits, corrupting the
result. This causes problems when using more than 4 GB of memory in
a TCG guest. So use a uint64_t instead.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20180119194648.25501-1-ard.biesheuvel@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25 11:45:28 +00:00
Peter Maydell
82de978a8b target/xtensa updates:
- make mini-bootloader independent of the initial CPU state;
 - add noMMU XTFPGA variants;
 - add two noMMU cores: de212 and sample_controller;
 - fix issues reported by coverity against xtensa translator and disassembler.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaZkLBAAoJEFH5zJH4P6BE6mIQAJT1hjEhfgm3xiGfVJZYGo34
 Eo/KeyKC7QOUbr0R+E+J3h2yxSXWYbweoAZvFXkH5V4w/fhdvrCXZPVvDW0QjYY/
 wG0h+YfV/8cgVxq8AiaPHie//bLhKvJKpqH4A0HnCE4pBcslKwjOtFcG20RfOgk8
 PeQSa15QsyhOtTgdlg8rdRDECL6Lm8mXTWtOdxx8HQsl73REmNgkOZzQDSK6D5gM
 EcAJQTCcPNoDKblJKae/msSG/Vbv3PxECGaj6B72pKDSUW5Z/OqzxXDnwWXQyOgu
 q1WoPwL5U0u7uH5JE5wdD0EqwypQAbMAuzFTsove5pQlaCWdxDJzK+74NFOh6BcL
 JmLZbA4UIlA19KXiZdNKRbeH5O1U1E9xBe0wxLsqVagrwkBfpRAhI3MG1qZE1Id3
 3O6qsk26ATBGmJgTb80Wk1lPKZgKzdgcCJpzj+nz7slXp4uIQ6R3rU+6huONsGNJ
 bvz+25RAMzbFLd1l0sDsEegxmQ2BqC2Y8JqO5EKgKtT72Aooax3X6pWc8GCPuwxd
 1MCoi/ZfDcYQXNS++A3hpiKI6+qrn2t51TuyB2aUnHXtFrhlBDN1W+d+tcxl23gr
 pHIaOKbZ0nL1TmUOklAZicFMoxbDz1uebqetNS3OIYkpmuf7hMrAnKkbXUeqq9qo
 gy8+yJrXbEWPHeWZ4MtX
 =qf0K
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/xtensa/tags/20180122-xtensa' into staging

target/xtensa updates:

- make mini-bootloader independent of the initial CPU state;
- add noMMU XTFPGA variants;
- add two noMMU cores: de212 and sample_controller;
- fix issues reported by coverity against xtensa translator and disassembler.

# gpg: Signature made Mon 22 Jan 2018 20:00:01 GMT
# gpg:                using RSA key 0x51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg:                 aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB  17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20180122-xtensa:
  target/xtensa: disas/xtensa: fix coverity warnings
  target/xtensa: add sample_controller core
  target/xtensa: allow different default CPU for MMU/noMMU
  target/xtensa: add de212 core
  hw/xtensa/xtfpga: support noMMU cores
  hw/xtensa/xtfpga: extract flash configuration
  hw/xtensa: extract xtensa_create_memory_regions
  target/xtensa: fix default sysrom/sysram addresses
  hw/xtensa/xtfpga: clean up function/structure names
  hw/xtensa/xtfpga: rewrite mini bootloader

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-24 16:59:36 +00:00
Peter Maydell
238e2d93c9 Various fixes/improvements, and support for the new 81/82
facility bits.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaZdEGAAoJEN7Pa5PG8C+vVq4P/04/hQMMhlYjscydro35dwLT
 8pjhJ1QNxoAhfCd3Mmb9finl+rC1KQHbxDwJlzbtjNUVVP6y6k4lAFaISwL5Gqui
 b/L5luBBdSpBBsL7IWIfXnL+yJUTgkvt6goc3x0rlLm7SCKjzBbPbXKPYvrfRLFO
 Km6kMMx4zwG7qJEmDrrdDSeGGw1lviyWuGiRutxLYR52Mvd+U6m1/G/53e5oqj2v
 XZLbS1mPty/jbFENm850dAXiDY7DHgIawYuqLcdjA50KYymCyaZP/dOvrf0pAeUc
 /eVp6xAz7S4bqW9/rM8/PUpyqx3Mug1TFk0ePbJEtt+/JtN2AC7wKFXvTi56n9aa
 RFLV+2WaDnY8+vcOhZkb5ptAKsDBkAzJw5hbXKM/elnUjPk8o326fDMrCyoMhj84
 JyyqLWEeVCdiCP1xdz0D8WnBq33+FDqJ7P2YHWBpcSyodG+udS1Qttc38JxUKstH
 9olJk+atnAdmTU+KmZuF6CnBbGIBxXqJrIXnroMT3Ycp6qdQzHmNq4UrTv/tQM+B
 PLR14kWNvEiGVEGBPc65JUJjLM3MoXzmnY5c/C7cmSGRMgLCSjnpSW6tBNEn470J
 nTfca/PLaUzhbIjPDwmB+AYjKZ/y+Pl5pz8e5rY6qt+7C8/qaOYrPtVy0VRt2smW
 ki1fawgWY6I00i9a1z5l
 =bvX/
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180122' into staging

Various fixes/improvements, and support for the new 81/82
facility bits.

# gpg: Signature made Mon 22 Jan 2018 11:54:46 GMT
# gpg:                using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20180122:
  s390x/kvm: provide stfle.81
  s390x/kvm: Handle bpb feature
  linux-headers: update
  s390x/tcg: fixup TEST PROTECTION
  s390x: fix storage attributes migration for non-small guests
  hw/s390x: Replace fprintf(stderr, "*\n" with qemu_log_mask()
  s390x/sclp: fix missing be conversion
  s390x/tcg: implement TEST PROTECTION
  s390x/sclp: fixup highest CPU address

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-23 13:10:24 +00:00
Max Filippov
847a647320 target/xtensa: disas/xtensa: fix coverity warnings
Coverity warnings CID 1385146, 1385148 1385149 and 1385150 point that
xtensa_opcode_num_operands and xtensa_format_num_slots may return -1
even when xtensa_opcode_decode and xtensa_format_decode succeed. In that
case unsigned counters used to iterate through operands/slots will not
do the right thing.
Make counters and loop bounds signed to fix the warnings.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-22 11:54:58 -08:00
Max Filippov
251634f4ce target/xtensa: add sample_controller core
The sample_controller core is a simple noMMU general purpose core, modern
analog of de212. It is used as a default core in the xtensa port of
Zephyr.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-22 11:54:58 -08:00
Max Filippov
a3c5e49da9 target/xtensa: allow different default CPU for MMU/noMMU
Define default core for noMMU configurations and use that core as
machine default with noMMU XTFPGA machines.
This is done to avoid offering non-working configuration (MMU core on a
noMMU machine) as a default.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-22 11:54:23 -08:00
Christian Borntraeger
9f0d13f4f1 s390x/kvm: provide stfle.81
stfle.81 (ppa15) is a transparent facility that can be passed to the
guest without the need to implement hypervisor support. As this feature
can be provided by firmware we add it to all full models.

Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180118085628.40798-4-borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-01-22 11:22:43 +01:00