Add new block driver handlers and corresponding generic wrappers.
It will be used to allow copy-before-write filter to provide
reach fleecing interface in further commit.
In future this approach may be used to allow reading qcow2 internal
snapshots, for example to export them through NBD.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-11-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add function to wait for all intersecting requests.
To be used in the further commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Nikita Lapshin <nikita.lapshin@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-10-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Add a convenient function similar with bdrv_block_status() to get
status of dirty bitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-9-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split intersecting-requests functionality out of block-copy to be
reused in copy-before-write filter.
Note: while being here, fix tiny typo in MAINTAINERS.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-7-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Split block_copy_reset() out of block_copy_reset_unallocated() to be
used separately later.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-6-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
This will be used in the following commit to bring "incremental" mode
to copy-before-write filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-4-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
That simplifies handling failure in existing code and in further new
usage of bdrv_merge_dirty_bitmap().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303194349.2304213-3-vsementsov@virtuozzo.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There is a bug in handling BDRV_REQ_NO_WAIT flag: we still may wait in
wait_serialising_requests() if request is unaligned. And this is
possible for the only user of this flag (preallocate filter) if
underlying file is unaligned to its request_alignment on start.
So, we have to fix preallocate filter to do only aligned preallocate
requests.
Next, we should fix generic block/io.c somehow. Keeping in mind that
preallocate is the only user of BDRV_REQ_NO_WAIT and that we have to
fix its behavior now, it seems more safe to just assert that we never
use BDRV_REQ_NO_WAIT with unaligned requests and add corresponding
comment. Let's do so.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Message-Id: <20220215121609.38570-1-vsementsov@virtuozzo.com>
[hreitz: Rebased on block GS/IO split]
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
There are some operation sizes in some subsets of AVX512 that
are missing from previous iterations of AVX. Detect them.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We've had placeholders for these opcodes for a while,
and should have support on ppc, s390x and avx512 hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last entry of DEF_HELPERS_FLAGS_n is DEF_HELPER_FLAGS_7 and
thus the MAX_OPC_PARAM_IARGS should be 7.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20220227113127.414533-2-ziqiaokong@gmail.com>
Fixes: e6cadf49c3 ("tcg: Add support for a helper with 7 arguments")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The job API will be handled separately in another serie.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-31-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Assertions in the callers of the function pointrs are already
added by previous patches.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20220303151616.325444-30-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-28-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similar to the header split, also the function pointers in BlockDriver
can be split in I/O and global state.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-26-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Snapshots run also under the BQL, so they all are
in the global state API. The aiocontext lock that they hold
is currently an overkill and in future could be removed.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-23-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockdev functions run always under the BQL lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-21-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blockjob functions run always under the BQL lock.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-19-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the I/O functions are not many, keep a single file.
Also split the function pointers in BlockJobDriver.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220303151616.325444-16-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to be sure that the functions that write the child and
parent list of a bs are under BQL and drain.
BQL prevents from concurrent writings from the GS API, while
drains protect from I/O.
TODO: drains are missing in some functions using this assert.
Therefore a proper assertion will fail. Because adding drains
requires additional discussions, they will be added in future
series.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-15-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-14-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to the previous patch, split block_int.h
in block_int-io.h and block_int-global-state.h
block_int-common.h contains the structures shared between
the two headers, and the functions that can't be categorized as
I/O or global state.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-12-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-10-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Similarly to the previous patches, split block-backend.h
in block-backend-io.h and block-backend-global-state.h
In addition, remove "block/block.h" include as it seems
it is not necessary anymore, together with "qemu/iov.h"
block-backend-common.h contains the structures shared between
the two headers, and the functions that can't be categorized as
I/O or global state.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-8-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mark all I/O functions with IO_CODE, and all "I/O OR GS" with
IO_OR_GS_CODE.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-6-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block.h currently contains a mix of functions:
some of them run under the BQL and modify the block layer graph,
others are instead thread-safe and perform I/O in iothreads.
Some others can only be called by either the main loop or the
iothread running the AioContext (and not other iothreads),
and using them in another thread would cause deadlocks, and therefore
it is not ideal to define them as I/O.
It is not easy to understand which function is part of which
group (I/O vs GS vs "I/O or GS"), and this patch aims to clarify it.
The "GS" functions need the BQL, and often use
aio_context_acquire/release and/or drain to be sure they
can modify the graph safely.
The I/O function are instead thread safe, and can run in
any AioContext.
"I/O or GS" functions run instead in the main loop or in
a single iothread, and use BDRV_POLL_WHILE().
By splitting the header in two files, block-io.h
and block-global-state.h we have a clearer view on what
needs what kind of protection. block-common.h
contains common structures shared by both headers.
block.h is left there for legacy and to avoid changing
all includes in all c files that use the block APIs.
Assertions are added in the next patch.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Righ now, IO_CODE and IO_OR_GS_CODE are nop, as there isn't
really a way to check that a function is only called in I/O.
On the other side, we can use qemu_in_main_thread() to check if
we are in the main loop.
The usage of macros makes easy to extend them in the future without
making changes in all callers. They will also visually help understanding
in which category each function is, without looking at the header.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-3-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When invoked from the main loop, this function is the same
as qemu_mutex_iothread_locked, and returns true if the BQL is held.
When invoked from iothreads or tests, it returns true only
if the current AioContext is the Main Loop.
This essentially just extends qemu_mutex_iothread_locked to work
also in unit tests or other users like storage-daemon, that run
in the Main Loop but end up using the implementation in
stubs/iothread-lock.c.
Using qemu_mutex_iothread_locked in unit tests defaults to false
because they use the implementation in stubs/iothread-lock,
making all assertions added in next patches fail despite the
AioContext is still the main loop.
See the comment in the function header for more information.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220303151616.325444-2-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The daemonizing functions in os-posix (os_daemonize() and
os_setup_post()) only daemonize the process if the static `daemonize`
variable is set. Right now, it can only be set by os_parse_cmd_args().
In order to use os_daemonize() and os_setup_post() from the storage
daemon to have it be daemonized, we need some other way to set this
`daemonize` variable, because I would rather not tap into the system
emulator's arg-parsing code. Therefore, this patch adds an
os_set_daemonize() function, which will return an error on os-win32
(because daemonizing is not supported there).
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220303164814.284974-2-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
RCU may be used from coroutines. Standard __thread variables cannot be
used by coroutines. Use the coroutine TLS macros instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220222140150.27240-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Compiler optimizations can cache TLS values across coroutine yield
points, resulting in stale values from the previous thread when a
coroutine is re-entered by a new thread.
Serge Guelton developed an __attribute__((noinline)) wrapper and tested
it with clang and gcc. I formatted his idea according to QEMU's coding
style and wrote documentation.
The compiler can still optimize based on analyzing noinline code, so an
asm volatile barrier with an output constraint is required to prevent
unwanted optimizations.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1952483
Suggested-by: Serge Guelton <sguelton@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220222140150.27240-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Following the bdrv_activate renaming, change also the name
of the respective callers.
bdrv_invalidate_cache_all -> bdrv_activate_all
blk_invalidate_cache -> blk_activate
test_sync_op_invalidate_cache -> test_sync_op_activate
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-5-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is currently just a wrapper for bdrv_invalidate_cache(),
but in future will contain the code of bdrv_co_invalidate_cache() that
has to always be protected by BQL, and leave the rest in the I/O
coroutine.
Replace all bdrv_invalidate_cache() invokations with bdrv_activate().
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220209105452.1694545-4-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the permission API calls into driver-specific callbacks
that always run under BQL. In this case, bdrv_crypto_luks
needs to perform permission checks before and after
qcrypto_block_amend_options(). The problem is that the caller,
block_crypto_amend_options_generic_luks(), can also run in I/O
from .bdrv_co_amend(). This does not comply with Global State-I/O API split,
as permissions API must always run under BQL.
Firstly, introduce .bdrv_amend_pre_run() and .bdrv_amend_clean()
callbacks. These two callbacks are guaranteed to be invoked under
BQL, respectively before and after .bdrv_co_amend().
They take care of performing the permission checks
in the same way as they are currently done before and after
qcrypto_block_amend_options().
These callbacks are in preparation for next patch, where we
delete the original permission check. Right now they just add redundant
control.
Then, call .bdrv_amend_pre_run() before job_start in
qmp_x_blockdev_amend(), so that it will be run before the job coroutine
is created and stay in the main loop.
As a cleanup, use JobDriver's .clean() callback to call
.bdrv_amend_clean(), and run amend-specific cleanup callbacks under BQL.
After this patch, permission failures occur early in the blockdev-amend
job to update a LUKS volume's keys. iotest 296 must now expect them in
x-blockdev-amend's QMP reply instead of waiting for the actual job to
fail later.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220209105452.1694545-2-eesposit@redhat.com>
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220304153729.711387-6-hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* Fixup checks for ext_zb[abcs]
* Add AIA support for virt machine
* Increase maximum number of CPUs in virt machine
* Fixup OpenTitan SPI address
* Add support for zfinx, zdinx and zhinx{min} extensions
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmIgUZ8ACgkQIeENKd+X
cFTzegf8DbUYFLpyfURm6bJoJfLQHjtjB4Hs6PnszJZZAEtC6Ia+551TDjh93vTf
GTbpWm0BlugQqEeyg+Mioe2mb2EhK2w208RGXRSDjT9QFVOaIp83NDAjaQTPqs22
XC35ygJYuo1Yf0WoJV77aB6IYPZB3ba5i+dkGb6lk60Ru5ULqoLvqp73tNe5KvNB
uVAEy+ubzjmzWs5hGPw95HqTIbcMGnlHew4XU6xJaiJixSy71Z5nOCCn+2sxk+6A
QW59Onglyfk01F9ac3GMLvi2e+FUdj0S0y07oVqchzxXWYpYwgTO4Xkt794c8mqU
T02kuelfubr1qH1z/IolStju1JnaXw==
=LzOY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20220303' into staging
Fifth RISC-V PR for QEMU 7.0
* Fixup checks for ext_zb[abcs]
* Add AIA support for virt machine
* Increase maximum number of CPUs in virt machine
* Fixup OpenTitan SPI address
* Add support for zfinx, zdinx and zhinx{min} extensions
# gpg: Signature made Thu 03 Mar 2022 05:26:55 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20220303:
target/riscv: expose zfinx, zdinx, zhinx{min} properties
target/riscv: add support for zhinx/zhinxmin
target/riscv: add support for zdinx
target/riscv: add support for zfinx
target/riscv: hardwire mstatus.FS to zero when enable zfinx
target/riscv: add cfg properties for zfinx, zdinx and zhinx{min}
hw: riscv: opentitan: fixup SPI addresses
hw/riscv: virt: Increase maximum number of allowed CPUs
docs/system: riscv: Document AIA options for virt machine
hw/riscv: virt: Add optional AIA IMSIC support to virt machine
hw/intc: Add RISC-V AIA IMSIC device emulation
hw/riscv: virt: Add optional AIA APLIC support to virt machine
target/riscv: fix inverted checks for ext_zb[abcs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for one possible new protection information format
introduced in TP4068 (and integrated in NVMe 2.0): the 64-bit CRC guard
and 48-bit reference tag. This version does not support storage tags.
Like the CRC16 support already present, this uses a software
implementation of CRC64 (so it is naturally pretty slow). But its good
enough for verification purposes.
This may go nicely hand-in-hand with the support that Keith submitted
for the Linux kernel[1].
[1]: https://lore.kernel.org/linux-nvme/20220126165214.GA1782352@dhcp-10-100-145-180.wdc.com/T/
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for up to 64 LBA formats through the LBAFEE field of the
Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for getting and setting the Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch updates the SPI_DEVICE, SPI_HOST0, SPI_HOST1
base addresses. Also adds these as unimplemented devices.
The address references can be found [1].
[1] 6c317992fb/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h (L107)
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220218063839.405082-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To facilitate software development of RISC-V systems with large number
of HARTs, we increase the maximum number of allowed CPUs to 512 (2^9).
We also add a detailed source level comments about limit defines which
impact the physical address space utilization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220220085526.808674-6-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We extend virt machine to emulate both AIA IMSIC and AIA APLIC
devices only when "aia=aplic-imsic" parameter is passed along
with machine name in the QEMU command-line. The AIA IMSIC is
only a per-HART MSI controller so we use AIA APLIC in MSI-mode
to forward all wired interrupts as MSIs to the AIA IMSIC.
We also provide "aia-guests=<xyz>" parameter which can be used
to specify number of VS-level AIA IMSIC Guests MMIO pages for
each HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220220085526.808674-4-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V AIA (Advanced Interrupt Architecture) defines a new
interrupt controller for MSIs (message signal interrupts) called
IMSIC (Incoming Message Signal Interrupt Controller). The IMSIC
is per-HART device and also suppport virtualizaiton of MSIs using
dedicated VS-level guest interrupt files.
This patch adds device emulation for RISC-V AIA IMSIC which
supports M-level, S-level, and VS-level MSIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220220085526.808674-3-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We extend virt machine to emulate AIA APLIC devices only when
"aia=aplic" parameter is passed along with machine name in QEMU
command-line. When "aia=none" or not specified then we fallback
to original PLIC device emulation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220220085526.808674-2-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add new macros to manipulate signed fields within the register.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-2-richard.henderson@linaro.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are no longer any VMStateDescription structs in the tree which
use the load_state_old support for custom handling of incoming
migration from very old QEMU. Remove the mechanism entirely.
This includes removing one stray useless setting of
minimum_version_id_old in a VMStateDescription with no load_state_old
function, which crept in after the global weeding-out of them in
commit 17e3134061.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220215175705.3846411-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
* ppc/pnv fixes
* PMU EBB support
* target/ppc: PowerISA Vector/VSX instruction batch
* ppc/pnv: Extension of the powernv10 machine with XIVE2 ans PHB5 models
* spapr allocation cleanups
-----BEGIN PGP SIGNATURE-----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=kWv5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-ppc-20220302' into staging
ppc-7.0 queue
* ppc/pnv fixes
* PMU EBB support
* target/ppc: PowerISA Vector/VSX instruction batch
* ppc/pnv: Extension of the powernv10 machine with XIVE2 ans PHB5 models
* spapr allocation cleanups
# gpg: Signature made Wed 02 Mar 2022 11:00:42 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-ppc-20220302: (87 commits)
hw/ppc/spapr_vio.c: use g_autofree in spapr_dt_vdevice()
hw/ppc/spapr_rtas.c: use g_autofree in rtas_ibm_get_system_parameter()
spapr_pci_nvlink2.c: use g_autofree in spapr_phb_nvgpu_ram_populate_dt()
hw/ppc/spapr_numa.c: simplify spapr_numa_write_assoc_lookup_arrays()
hw/ppc/spapr_drc.c: use g_autofree in spapr_drc_by_index()
hw/ppc/spapr_drc.c: use g_autofree in spapr_dr_connector_new()
hw/ppc/spapr_drc.c: use g_autofree in drc_unrealize()
hw/ppc/spapr_drc.c: use g_autofree in drc_realize()
hw/ppc/spapr_drc.c: use g_auto in spapr_dt_drc()
hw/ppc/spapr_caps.c: use g_autofree in spapr_caps_add_properties()
hw/ppc/spapr_caps.c: use g_autofree in spapr_cap_get_string()
hw/ppc/spapr_caps.c: use g_autofree in spapr_cap_set_string()
hw/ppc/spapr.c: fail early if no firmware found in machine_init()
hw/ppc/spapr.c: use g_autofree in spapr_dt_chosen()
pnv/xive2: Add support for 8bits thread id
pnv/xive2: Add support for automatic save&restore
xive2: Add a get_config() handler for the router configuration
pnv/xive2: Add support XIVE2 P9-compat mode (or Gen1)
ppc/pnv: add XIVE Gen2 TIMA support
pnv/xive2: Introduce new capability bits
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- restore TESTS/IMAGES filtering to docker tests
- add NOUSER to alpine image
- bump lcitool version
- move arm64/s390x cross build images to lcitool
- add aarch32 runner CI scripts
- expand testing to more vectors
- update s390x jobs to focal for gitlab/travis
- disable threadcount for all sh4
- fix semihosting SYS_HEAPINFO and test
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmIdGJEACgkQ+9DbCVqe
KkQZYQf+Ndlm651dulO4J55puk8cUOMrCrDvqVkxM/V7ZD4GKyoa9/PstfOspLkQ
hXNANtfcr7zsXxo7J7PKVpX3y+upxCMLLK9NqHXW3O8mOSoru44caLko6FdmwWkU
KmoToEM3jgxJxqrE8ijLz1gxo79TVT0m3OyyKlMf9C+Wf4BfUe4NXjt/VMcecrDd
wKJnvjWyrk67yOyPRDnT2XlG1HdphD90g8xPxiK1tzkEQEWJlojTLSZENQksa1V6
JBu1mwT/KPodkllzTQcHHjGn4/vsdzFqjqV+8d3xXiSmr/QdeyByUeDhJ7aI4qdY
aKoX3hoIUdENmPxqXozuVBy/S4gLoA==
=MY0T
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-and-semihosting-280222-1' into staging
Testing and semihosting updates:
- restore TESTS/IMAGES filtering to docker tests
- add NOUSER to alpine image
- bump lcitool version
- move arm64/s390x cross build images to lcitool
- add aarch32 runner CI scripts
- expand testing to more vectors
- update s390x jobs to focal for gitlab/travis
- disable threadcount for all sh4
- fix semihosting SYS_HEAPINFO and test
# gpg: Signature made Mon 28 Feb 2022 18:46:41 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-and-semihosting-280222-1:
tests/tcg: port SYS_HEAPINFO to a system test
semihosting/arm-compat: replace heuristic for softmmu SYS_HEAPINFO
tests/tcg: completely disable threadcount for sh4
gitlab: upgrade the job definition for s390x to 20.04
travis.yml: Update the s390x jobs to Ubuntu Focal
tests/tcg: add vectorised sha512 versions
tests/tcg: add sha512 test
tests/tcg: build sha1-vector with O3 and compare
tests/tcg/ppc64: clean-up handling of byte-reverse
gitlab: add a new aarch32 custom runner definition
scripts/ci: allow for a secondary runner
scripts/ci: add build env rules for aarch32 on aarch64
tests/docker: introduce debian-riscv64-test-cross
tests/docker: update debian-s390x-cross with lcitool
tests/docker: update debian-arm64-cross with lcitool
tests/lcitool: update to latest version
tests/docker: add NOUSER for alpine image
tests/docker: restore TESTS/IMAGES filtering
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
