Keep package list sorted, this eases rebase/cherry-pick.
Fixes: 3a6784813
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200322120104.21267-2-philmd@redhat.com>
Message-Id: <20200323161514.23952-8-alex.bennee@linaro.org>
While debugging check-acceptance failures I found an instability in
the mips64el test case. Briefly the test case:
retry.py -n 100 -c -- ./mips64el-softmmu/qemu-system-mips64el \
-display none -vga none -serial mon:stdio \
-machine malta -kernel ./vmlinux-4.7.0-rc1.I6400 \
-cpu I6400 -smp 8 -vga std \
-append "printk.time=0 clocksource=GIC console=tty0 console=ttyS0 panic=-1" \
--no-reboot
Reports about a 9% failure rate:
Results summary:
0: 91 times (91.00%), avg time 5.547 (0.45 varience/0.67 deviation)
-6: 9 times (9.00%), avg time 3.394 (0.02 varience/0.13 deviation)
Ran command 100 times, 91 passes
When re-run with "--accel tcg,thread=single" the instability goes
away.
Results summary:
0: 100 times (100.00%), avg time 17.318 (249.76 varience/15.80 deviation)
Ran command 100 times, 100 passes
Which seems to indicate there is some aspect of the MIPS MTTCG fixes
that has been missed. Ideally we would fix that but I'm afraid I don't
have time to investigate and am not super familiar with the
architecture anyway. In lieu of someone tracking down the failure lets
disable it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com>
Message-Id: <20200323161514.23952-7-alex.bennee@linaro.org>
When the patch was merged it was part of a longer series which had
already merged the config changes. Semu-revert the config related
changes for now so things will build.
Fixes: b081986c85
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200323161514.23952-6-alex.bennee@linaro.org>
The installer supports GPT now, so the install workflow has changed a
bit. Also: run without VGA device. This works around a bug in the
seabios sercon code and makes the bootloader menu show up on the serial
line, so we can drop the quirk for that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200310083218.26355-5-kraxel@redhat.com>
Message-Id: <20200323161514.23952-5-alex.bennee@linaro.org>
Move '-device VGA' from basevm.py to the guests, so they have
the chance to opt out and run without display device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200310083218.26355-3-kraxel@redhat.com>
Message-Id: <20200323161514.23952-3-alex.bennee@linaro.org>
Run "tail -f /var/tmp/*/qemu*console.raw" in another terminal
to watch the install console.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200310083218.26355-2-kraxel@redhat.com>
Message-Id: <20200323161514.23952-2-alex.bennee@linaro.org>
Deep inside the FreeBSD netmap headers we end up including stdatomic.h
which clashes with qemu's atomic functions which are modelled along
the C11 standard. To avoid a massive rename lets just ifdef around the
problem.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200326170121.13045-1-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
- Fix qemu-img convert with a host device or iscsi target
- Use-after-free fix in mirror
- Some minor qcow2 fixes
- Minor sheepdog fix
- Minor qemu-img check report fix
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl58vAoSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AXDAH/R6PSji88+u3Cu4sVOtc2b73rknfGgTZ
o4iETRYMr3/guC/lff5ckEfWN8zqnlrZeymZ5r4pwBrpDZlpP7JKYYihiJGXWCze
NLZ1JCASWnP7OGbcEqgbODP988b8Ik/X42Re3Q7UPvaunhSh5SRDm2J2RgsObLuU
vu+VPwm8Y+voipbtMcJrRwwF0MxS1b43DaTtwI9Aq6GwHz6beej5CeFa9eP7xXo9
vxQxXQdRpPxjqEdIQk29gcGYvgfJDBIxt12ILlBiGuQWYh3f+bfxpcAcJUb+DTIN
GnrcTTlfsX+Ll9RYpBCtIOaRdfpYai59YP63KrSYmh5D78RbawLkMi0=
=zSv1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-03-26' into staging
Block patches for 5.0-rc1:
- Fix qemu-img convert with a host device or iscsi target
- Use-after-free fix in mirror
- Some minor qcow2 fixes
- Minor sheepdog fix
- Minor qemu-img check report fix
# gpg: Signature made Thu 26 Mar 2020 14:28:26 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-03-26:
iotests/138: Test leaks/corruptions fixed report
iotests: Add poke_file_[bl]e functions
qemu-img: Fix check's leak/corruption fix report
sheepdog: Consistently set bdrv_has_zero_init_truncate
qcow2: Avoid feature name extension on small cluster size
qcow2: List autoclear bit names in header
qcow2: Comment typo fixes
block: trickle down the fallback image creation function use to the block drivers
block: pass BlockDriver reference to the .bdrv_co_create
block/mirror: fix use after free of local_err
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that qemu-img check reports the number of leaks and corruptions
fixed in its JSON report (after a successful run).
While touching the _unsupported_imgopts line, adjust the note on why
data_file does not work with this test: The current comment sounds a bit
like it is a mistake for qemu-img check not to check external data
files' refcounts. But there are no such refcounts, so it is no mistake.
Just say that qemu-img check does not do much for external data files,
and this is why this test does not work with them.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200324172757.1173824-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similarly to peek_file_[bl]e, we may want to write binary integers into
a file. Currently, this often means messing around with poke_file and
raw binary strings. I hope these functions make it a bit more
comfortable.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Code-suggested-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324172757.1173824-3-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are two problems with qemu-img check's report on how many leaks
and/or corruptions have been fixed:
(1) ImageCheck.has_leaks_fixed and ImageCheck.has_corruptions_fixed are
only true when ImageCheck.leaks or ImageCheck.corruptions (respectively)
are non-zero. qcow2's check implementation will set the latter to zero
after it has fixed leaks and corruptions, though, so leaks-fixed and
corruptions-fixed are actually never reported after successful repairs.
We should always report them when they are non-zero, just like all the
other fields of ImageCheck.
(2) After something has been fixed and we run the check a second time,
leaks_fixed and corruptions_fixed are taken from the first run; but
has_leaks_fixed and has_corruptions_fixed are not. The second run
actually cannot fix anything, so with (1) fixed, has_leaks_fixed and
has_corruptions_fixed will always be false here. (With (1) unfixed,
they will at least be false on successful runs, because then the number
of leaks and corruptions found in the second run should be 0.)
We should save has_leaks_fixed and has_corruptions_fixed just like we
save leaks_fixed and corruptions_fixed.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324172757.1173824-2-mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
block_int.h claims that .bdrv_has_zero_init must return 0 if
.bdrv_has_zero_init_truncate does likewise; but this is violated if
only the former callback is provided if .bdrv_co_truncate also exists.
When adding the latter callback, it was mistakenly added to only one
of the three possible sheepdog instantiations.
Fixes: 1dcaf527
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200324174233.1622067-5-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As the feature name table can be quite large (over 9k if all 64 bits
of all three feature fields have names; a mere 8 features leaves only
8 bytes for a backing file name in a 512-byte cluster), it is unwise
to emit this optional header in images with small cluster sizes.
Update iotest 036 to skip running on small cluster sizes; meanwhile,
note that iotest 061 never passed on alternative cluster sizes
(however, I limited this patch to tests with output affected by adding
feature names, rather than auditing for other tests that are not
robust to alternative cluster sizes).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200324174233.1622067-4-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The feature table is supposed to advertise the name of all feature
bits that we support; however, we forgot to update the table for
autoclear bits. While at it, move the table to read-only memory in
code, and tweak the qcow2 spec to name the second autoclear bit.
Update iotests that are affected by the longer header length.
Fixes: 88ddffae
Fixes: 93c24936
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324174233.1622067-3-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Various trivial typos noticed while working on this file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200324174233.1622067-2-eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Instead of checking the .bdrv_co_create_opts to see if we need the
fallback, just implement the .bdrv_co_create_opts in the drivers that
need it.
This way we don't break various places that need to know if the
underlying protocol/format really supports image creation, and this way
we still allow some drivers to not support image creation.
Fixes: fd17146cd9
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1816007
Note that technically this driver reverts the image creation fallback
for the vxhs driver since I don't have a means to test it, and IMHO it
is better to leave it not supported as it was prior to generic image
creation patches.
Also drop iscsi_create_opts which was left accidentally.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-3-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
[mreitz: Fixed alignment, and moved bdrv_co_create_opts_simple() and
bdrv_create_opts_simple from block.h into block_int.h]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will allow the reuse of a single generic .bdrv_co_create
implementation for several drivers.
No functional changes.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200326011218.29230-2-mlevitsk@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
local_err is used again in mirror_exit_common() after
bdrv_set_backing_hd(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Small fixes all around.
Ones that are noticeable:
a) Igor's migration compatibility fix affecting older machine types
has been seen in the wild
b) Philippe's autconverge fix should fix an intermittently
failing migration test.
c) Mao's makes a small change to the output of 'info
migrate_parameters' for tls-authz.
-----BEGIN PGP SIGNATURE-----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=AaVo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20200325b' into staging
Combo Migration/HMP/virtiofs pull
Small fixes all around.
Ones that are noticeable:
a) Igor's migration compatibility fix affecting older machine types
has been seen in the wild
b) Philippe's autconverge fix should fix an intermittently
failing migration test.
c) Mao's makes a small change to the output of 'info
migrate_parameters' for tls-authz.
# gpg: Signature made Wed 25 Mar 2020 13:14:48 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20200325b:
migration: use "" instead of (null) for tls-authz
migration/ram: fix use after free of local_err
migration/colo: fix use after free of local_err
vl.c: fix migration failure for 3.1 and older machine types
tools/virtiofsd/passthrough_ll: Fix double close()
hmp/vnc: Fix info vnc list leak
tests/migration: Reduce autoconverge initial bandwidth
xbzrle: update xbzrle doc
hmp-cmd: fix a missing_break warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The first argument, timeval, is allowed to be NULL.
The second argument, timezone, was missing. While its use is
deprecated, it is still present in the syscall.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-6-richard.henderson@linaro.org>
[lv: add "#if defined(TARGET_NR_gettimeofday)"]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The page isn't (necessarily) present in the host /proc/self/maps,
and even if it might be it isn't present in page_flags, and even
if it was it might not have the same set of page permissions.
The easiest thing to do, particularly when it comes to the
"[vsyscall]" note at the end of line, is to special case it.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-5-richard.henderson@linaro.org>
[lv: remove trailing space]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Notice the magic page during translate, much like we already
do for the arm32 commpage. At runtime, raise an exception to
return cpu_loop for emulation.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-4-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This is a bit tidier than open-coding the 5 lines necessary
to initialize the target_siginfo_t. In addition, this zeros
the remaining bytes of the target_siginfo_t, rather than
passing in garbage.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-3-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We are not short of numbers for EXCP_*. There is no need to confuse things
by having EXCP_VMEXIT and EXCP_SYSCALL overlap, even though the former is
only used for system mode and the latter is only used for user mode.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200213032223.14643-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This patch fixes two problems:
- it cleanups linux-user variants (for instance ppc64-linux-user
and ppc64le-linux-user)
- it removes the .o file when it removes the .d file, otherwise the .o
file is never updated
Fixes: 5f29856b85 ("linux-user, configure: improve syscall_nr.h dependencies checking")
Fixes: 4d6a835dea ("linux-user: introduce parameters to generate syscall_nr.h")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200325075757.1959961-1-laurent@vivier.eu>
run:
(qemu) info migrate_parameters
announce-initial: 50 ms
...
announce-max: 550 ms
multifd-compression: none
xbzrle-cache-size: 4194304
max-postcopy-bandwidth: 0
tls-authz: '(null)'
Migration parameter 'tls-authz' is used to provide the QOM ID
of a QAuthZ subclass instance that provides the access control
check, default is NULL. But the empty string is not a valid
object ID, so use "" instead of the default. Although it will
fail when lookup an object with ID "", it is harmless, just
consistent with tls_creds.
As a bonus, this patch also fixed the bad indentation on the
last line and removed 'has_tls_authz' redundant check in
'hmp_info_migrate_parameters'.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <119f539a9f4d198bc3bcced46b8280520d60bc51.1585100802.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
local_err is used again in migration_bitmap_sync_precopy() after
precopy_notify(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-6-vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
local_err is used again in secondary_vm_do_failover() after
replication_stop_all(), so we must zero it. Otherwise try to set
non-NULL local_err will crash.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200324153630.11882-5-vsementsov@virtuozzo.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Migration from QEMU(v4.0) fails when using 3.1 or older machine
type. For example if one attempts to migrate
QEMU-2.12 started as
qemu-system-ppc64 -nodefaults -M pseries-2.12 -m 4096 -mem-path /tmp/
to current master, it will fail with
qemu-system-ppc64: Unknown ramblock "ppc_spapr.ram", cannot accept migration
qemu-system-ppc64: error while loading state for instance 0x0 of device 'ram'
qemu-system-ppc64: load of migration failed: Invalid argument
Caused by 900c0ba373 commit which switches main RAM allocation to
memory backends and the fact in 3.1 and older QEMU, backends used
full[***] QOM path as memory region name instead of backend's name.
That was changed after 3.1 to use prefix-less names by default
(fa0cb34d22) for new machine types.
*** effectively makes main RAM memory region names defined by
MachineClass::default_ram_id being altered with '/objects/' prefix
and therefore migration fails as old QEMU sends prefix-less
name while new QEMU expects name with prefix when using 3.1 and
older machine types.
Fix it by forcing implicit[1] memory backend to always use
prefix-less names for its memory region by setting
'x-use-canonical-path-for-ramblock-id'
property to false.
1) i.e. memory backend created by compat glue which maps
-m/-mem-path/-mem-prealloc/default RAM size into
appropriate backend type/options to match old CLI format.
Fixes: 900c0ba373
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Message-Id: <20200304172748.15338-1-imammedo@redhat.com>
Tested-by: Lukáš Doktor <ldoktor@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
On success, the fdopendir() call closes fd. Later on the error
path we try to close an already-closed fd. This can lead to
use-after-free. Fix by only closing the fd if the fdopendir()
call failed.
Cc: qemu-stable@nongnu.org
Fixes: b39bce121b (add dirp_map to hide lo_dirp pointers)
Reported-by: Coverity (CID 1421933 USE_AFTER_FREE)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200321120654.7985-1-philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We're iterating the list, and then freeing the iteration pointer rather
than the list head.
Fixes: 0a9667ecdb ("hmp: Update info vnc")
Reported-by: Coverity (CID 1421932)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200323120822.51266-1-dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When using max-bandwidth=~100Mb/s, this test fails on Travis-CI
s390x when configured with --disable-tcg:
$ make check-qtest
TEST check-qtest-s390x: tests/qtest/boot-serial-test
qemu-system-s390x: -accel tcg: invalid accelerator tcg
qemu-system-s390x: falling back to KVM
TEST check-qtest-s390x: tests/qtest/pxe-test
TEST check-qtest-s390x: tests/qtest/test-netfilter
TEST check-qtest-s390x: tests/qtest/test-filter-mirror
TEST check-qtest-s390x: tests/qtest/test-filter-redirector
TEST check-qtest-s390x: tests/qtest/drive_del-test
TEST check-qtest-s390x: tests/qtest/device-plug-test
TEST check-qtest-s390x: tests/qtest/virtio-ccw-test
TEST check-qtest-s390x: tests/qtest/cpu-plug-test
TEST check-qtest-s390x: tests/qtest/migration-test
**
ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
ERROR - Bail out! ERROR:tests/qtest/migration-test.c:1229:test_migrate_auto_converge: 'got_stop' should be FALSE
make: *** [tests/Makefile.include:633: check-qtest-s390x] Error 1
Per David Gilbert, "it could just be the writing is slow on s390
and the migration thread fast; in which case the autocomplete
wouldn't be needed. Perhaps we just need to reduce the bandwidth
limit."
Tuning the threshold by reducing the initial bandwidth makes the
autoconverge test pass.
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200323184015.11565-1-philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Add new parameter description, also:
1. Remove unsociable space.
2. Nit picking: s/two/2 in report
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This fix coverity issues 94417686:
1260 break;
CID 94417686: (MISSING_BREAK)
1261. unterminated_case: The case for value "MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD" is not terminated by a 'break' statement.
1261 case MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD:
1262 p->has_throttle_trigger_threshold = true;
1263 visit_type_int(v, param, &p->throttle_trigger_threshold, &err);
1264 case MIGRATION_PARAMETER_CPU_THROTTLE_INITIAL:
Fixes: dc14a47076
Fixes: Coverity (CID 1421950)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200318071620.59748-1-pannengyuan@huawei.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Current code allocates the memory for ENV_CURVE too late. Move
allocation to OPLOpenTable() and deallocation to OPLCloseTable().
To reproduce the bug start qemu with -soundhw adlib.
Fixes 2eea51bd01 "hw/audio/fmopl: Move ENV_CURVE to .heap to save
32KiB of .bss"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200324061855.5951-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix warnings reported by Clang static code analyzer:
CC ui/input-linux.o
ui/input-linux.c:343:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_REL, sizeof(relmap)), &relmap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:351:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_ABS, sizeof(absmap)), &absmap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:354:13: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGABS(ABS_X), &absinfo);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:357:13: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGABS(ABS_Y), &absinfo);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:365:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGBIT(EV_KEY, sizeof(keymap)), keymap);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ui/input-linux.c:366:9: warning: Value stored to 'rc' is never read
rc = ioctl(il->fd, EVIOCGKEY(sizeof(keystate)), keystate);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-id: 20200322161219.17757-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Although qemu-ga has supported vsock since 2016 it was not documented on
the man page.
Also add the socket address representation to the qga --help output.
Fixes: 586ef5dee7
("qga: add vsock-listen method")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The QAPI struct GuestFileWhence has a comment about how we are
exploiting equivalent values between two different integer types
shared in a union. But C says behavior is undefined on assignments to
overlapping storage when the two types are not the same width, and
indeed, 'int64_t value' and 'enum QGASeek name' are very likely to be
different in width. Utilize a temporary variable to fix things.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 0b4b49387
Fixes: Coverity CID 1421990
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
guest-file-read command is currently implemented to read from a
file handle count number of bytes. when executed with a very large count number
qemu-ga crashes.
after some digging turns out that qemu-ga crashes after trying to allocate
a buffer large enough to save the data read in it, the buffer was allocated using
g_malloc0 which is not fail safe, and results a crash in case of failure.
g_malloc0 was replaced with g_try_malloc0() which returns NULL on failure,
A check was added for that case in order to prevent qemu-ga from crashing
and to send a response to the qemu-ga client accordingly.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1594054
Signed-off-by: Basil Salman <basil@daynix.com>
Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch handles the case where VSS Provider is already registered,
where in such case qga uninstalls the provider and registers it again.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Installation might fail if we don't wait for the provider
unregisteration process to finish.
Signed-off-by: Sameeh Jubran <sjubran@redhat.com>
Signed-off-by: Basil Salman <basil@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
- Use-after-free fix
- Fix for a memleak in an error path
- Preventative measures against other potential use-after-frees, and
against NULL deferences at runtime
- iotest fixes
-----BEGIN PGP SIGNATURE-----
iQFFBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl55+r0SHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AypAH9ijjB8H/Vxp+A8DSIvMwXVDTEp2I+ACX
+riIwJIgvpz9Vblf9PPFjGfoArBMtQwb4F91aPy+eDaYq+teaekmPU4YXGMz+/dG
5JDKoAbJJr1gwMrSOIW3kQ/MKvoP0hiEFgwXvBvXJkXiANb2sCIvrXXKr/gFB0vt
M0/TERutiO7r+mkbfIVPKJahlaswguvoavqDak6kk5+OeOBpBoPwfPWlcjjEfGHb
epZiZN/i6fHLphfD+TEmTIzQQQI6csPUDA/ORbhodVZ2sQJ5kVfLVs+69RAwilC6
L3F1SnstnXcazUYlWOIicTJfKfC0BubM2Sofs7mfPFwN6I8A6PRTtw==
=KpHc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-03-24' into staging
Block patches for 5.0-rc0:
- Use-after-free fix
- Fix for a memleak in an error path
- Preventative measures against other potential use-after-frees, and
against NULL deferences at runtime
- iotest fixes
# gpg: Signature made Tue 24 Mar 2020 12:19:09 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-03-24:
iotests/026: Move v3-exclusive test to new file
iotests: Fix cleanup path in some tests
block/qcow2: zero data_file child after free
block: bdrv_set_backing_bs: fix use-after-free
block: Assert BlockDriver::format_name is not NULL
block: Avoid memleak on qcow2 image info failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
data_file does not work with v2, and we probably want 026 to keep
working for v2 images. Thus, open a new file for v3-exclusive error
path test cases.
Fixes: 81311255f2
(“iotests/026: Test EIO on allocation in a data-file”)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200311140707.1243218-1-mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some iotests leave behind some external data file when run for qcow2
with -o data_file. Fix that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200224171631.384314-1-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
data_file being NULL doesn't seem to be a correct state, but it's
better than dead pointer and simpler to debug.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200316060631.30052-3-vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
