Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
[rth: Split out of a larger patch.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Xtensa cores may or may not have hardware support for unaligned memory
access. Remove TARGET_ALIGNED_ONLY=y from all xtensa configurations and
pass MO_ALIGN in memory access flags for all operations that would raise
an exception.
Simplify use of gen_load_store_alignment by passing access size and
alignment requirements in single parameter.
Drop condition from xtensa_cpu_do_unaligned_access and replace it with
assertion.
Add a test.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
l32ex does memory access as all regular load/store operations at CRING
level. Fix apparent pasto from l32e that caused it to use RING instead.
This is a correctness issue, not a security issue, because in the worst
case the privilege level of memory access may be lowered, resulting in
an exception when the correct implementation would've succeeded.
In no case it would allow memory access that would've raised an
exception in the correct implementation.
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
target/xtensa used to generate an extra EXCP_DEBUG exception before the
first instruction executed after an interrupt or an exception is taken
to allow single-stepping that instruction in the debugger.
This is no longer needed after the following commits:
a7ba744f40 ("tcg/cpu-exec: precise single-stepping after an exception")
ba3c35d9c4 ("tcg/cpu-exec: precise single-stepping after an interrupt")
Drop exception state tracking/extra EXCP_DEBUG generation code.
Cc: qemu-stable@nongnu.org # v5.1, v5.2, v6.0
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
tb_gen_code() assumes that tb->size must never be zero, otherwise it
may produce spurious exceptions. For xtensa this may happen when
decoding an unknown instruction, when handling a write into the
CCOUNT or CCOMPARE special register and when single-stepping the first
instruction of an exception handler.
Fix by pretending that the size of the respective translation block is
1 in all these cases.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20210416154939.32404-4-iii@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to move the semihosting code out of hw/ in the next patch.
This patch contains the mechanical steps, created using:
$ git mv include/hw/semihosting/ include/
$ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210226131356.3964782-2-f4bug@amsat.org>
Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
This does not implement all opcodes related to div/sqrt as specified in
the xtensa ISA, partly because the official specification is not
complete and partly because precise implementation is unnecessarily
complex. Instead instructions specific to the div/sqrt sequences are
implemented differently, most of them as nops, but the results of
div/sqrt sequences is preserved.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DFPU may be configured with 32-bit or with 64-bit registers. Xtensa ISA
does not specify how single-precision values are stored in 64-bit
registers. Existing implementations store them in the low half of the
registers.
Add value extraction and write back to single-precision opcodes.
Add new double precision opcodes. Add 64-bit register file.
Add 64-bit values dumping to the xtensa_cpu_dump_state.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
BR registers used in FPU comparison opcodes are available as opcode
arguments for translators. Use them. This simplifies comparison helpers
interface and makes them usable in FLIX bundles.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move FSR/FCR register accessors from core opcodes to FPU2000 opcodes as
they are FPU2000-specific.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add _s suffix to all FPU2000 opcode translators and helpers that also
have double-precision variant to unify naming and allow adding DFPU
implementations. Add _fpu2k_ to the names of helpers that will have
different implementation for the DFPU .
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
FLIX dependency breaking code assumes that all registers are 32 bit
wide. This may not always be correct.
Extract actual register width from the associated register file and use
it to create temporaries of correct width and generate correct data
movement instructions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Register file name may not uniquely identify a register file in the set
of configurations. E.g. floating point registers may have different size
in different configurations. Use register file geometry as additional
identifier.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
There's XtensaOpcodeOps::test_ill that is used to check whether opcode
generates illegal opcode exception or not. The illegal opcode exception
is not special and so this callback can be generalized to provide any
XTENSA_OP_* flags that are not completely static.
Introduce XtensaOpcodeOps::test_exceptions and convert all test_ill
users to test_exceptions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Since commit
ba3e792669 ("icount: clean up cpu_can_io at the entry to the block")
it has been unnecessary for target code to call gen_io_end() after an IO
instruction in icount mode; it is sufficient to call gen_io_start()
before it and to force the end of the TB.
Remaining call in xtensa target translator is for the opcodes that may
change IRQ state. All of them end current TB, so gen_io_end is not
needed. Drop gen_io_end call from the xtensa target translator.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
After Xtensa release RE.2 simcall opcode has become nop for the
hardware instead of illegal instruction.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Xtensa configuration overlays for recent releases may have special
registers for which [rwx]sr opcodes are defined, but they are not listed
as SR in xtensa_sysreg_name and associated functions. As a result
generic translate_[rwx]sr* functions generate access to uninitialized
cpu_SR causing segfault at runtime.
Don't try to access cpu_SR for such registers, ignore writes and return
0 for reads.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Rather than dynamically allocate, and risk failing to free
when we longjmp out of the translator, allocate the maximum
buffer size based on the maximum supported instruction length.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Dynamically allocating a new structure within the DisasContext can
potentially leak as we can longjmp out of the translation loop (see
test_phys_mem). The proper fix would be to use static allocation
within the DisasContext but as the Xtensa translator imports it's code
from elsewhere I leave that as an exercise for the maintainer.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20200403191150.863-6-alex.bennee@linaro.org>
We currently search both the root and the tcg/ directories for tcg
files:
$ git grep '#include "tcg/' | wc -l
28
$ git grep '#include "tcg[^/]' | wc -l
94
To simplify the preprocessor search path, unify by expliciting the
tcg/ directory.
Patch created mechanically by running:
$ for x in \
tcg.h tcg-mo.h tcg-op.h tcg-opc.h \
tcg-op-gvec.h tcg-gvec-desc.h; do \
sed -i "s,#include \"$x\",#include \"tcg/$x\"," \
$(git grep -l "#include \"$x\""); \
done
Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc parts)
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200101112303.20724-2-philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allow ps.ring modification by wsr.ps/xsr.ps and use ps.ring value in
xtensa_get_[c]ring on configurations with MPU.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Prior patch resets can_do_io flag at the TB entry. Therefore there is no
need in resetting this flag at the end of the block.
This patch removes redundant gen_io_end calls.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <156404429499.18669.13404064982854123855.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@gmail.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Exclusive Instructions provide a general-purpose mechanism for
atomic updates of memory-based synchronization variables that can be
used for exclusion algorithms.
Use cmpxchg-based implementation that is sufficient for the typical use
of exclusive access in atomic operations.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Block prefetch option adds a bunch of non-privileged opcodes that may be
implemented as nops since QEMU doesn't model caches.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The Memory Protection Unit Option (MPU) is a combined instruction and
data memory protection unit with more protection flexibility than the
Region Protection Option or the Region Translation Option but without
any translation capability. It does no demand paging and does not
reference a memory-based page table.
Add memory protection unit option, internal state, SRs and opcodes.
Implement MPU entries dumping in dump_mmu.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add SRs and rsr/wsr/xsr opcodes defined by the parity/ECC xtensa option.
The implementation is trivial since we don't emulate parity/ECC yet.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
SR numbers are not unique: different Xtensa options may reuse SR number
for different purposes. Introduce generic rsr/wsr functions and xsr
template and use them instead of centralized SR access functions. Change
prototypes of specific rsr/wsr functions to match XtensaOpcodeOp and use
them instead of centralized SR access functions. Put xtensa option that
introduces SR into the second opcode description parameter and use it to
test for rsr/wsr/xsr opcode validity. Extract SR and UR names for the
xtensa_cpu_dump_state from libisa. Merge SRs and URs in the dump.
Register names of used SR/UR in init_libisa and use these names for TCG
globals referencing these SR/UR.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In order to handle TB's that translate to too much code, we
need to place the control of the length of the translation
in the hands of the code gen master loop.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
break_dependency incorrectly handles the case of dependency on an opcode
that references the same register multiple times. E.g. the following
instruction is translated incorrectly:
{ or a2, a3, a3 ; or a3, a2, a2 }
This happens because resource indices of both dependency graph nodes are
incremented, and a copy for the second instance of the same register in
the ending node is not done.
Only increment resource index of the ending node of the dependency.
Add test.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Load/store opcodes may raise MMU exceptions. Normally exceptions should
be checked in priority order before any actual operations, but since MMU
exceptions are tightly coupled with actual memory access, there's
currently no way to do it.
Approximate this behavior by executing all load, then all store, and
then all other opcodes in the FLIX bundles. Use opcode dependency
mechanism to express ordering. Mark load/store opcodes with
XTENSA_OP_{LOAD,STORE} flags. Newer libisa has classifier functions that
can tell whether opcode is a load or store, but this information is not
available in the existing overlays.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Currently topologic opcode sorting stops at the first detected
dependency loop. Introduce struct opcode_arg_copy that describes
temporary register copy. Scan remaining opcodes searching for
dependencies that can be broken, break them by introducing temporary
register copies and record them in an array. In case of success
create local temporaries and initialize them with current register
values. Share single temporary copy between all register users. Delete
temporaries after translation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
libisa represents boolean registers b0..b16 as a BR register file and as
BR4 and BR8 register groups. Add these register files and use
OpcodeArg::{in,out} parameters to access boolean registers in
translators.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
libisa represents MAC16 registers m0..m3 as an MR register file. Add
this register file and reference its registers directly from the
translate_mac16. Drop translator parameter that indicates whether opcode
argument is in ar or in mr.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
To support circular register dependencies in FLIX bundles opcode inputs
and outputs must be separate and adjustable. Circular dependencies can
be broken by making temporary copies of opcode inputs and substituting
them into the arguments array instead of the original registers.
E.g. the circular register dependency in the following bundle:
{ mov a2, a3 ; mov a3, a2 }
can be resolved by making copy a2' = a2 and substituting it as input
argument of the second opcode:
{ mov a2, a3 ; mov a3, a2' }
Change opcode translator prototype to accept OpcodeArg array as
argument. For each register argument initialize OpcodeArg::{in,out} with
TCGv_* of the respective register. Don't explicitly use cpu_R in the
opcode translators, use OpcodeArg::{in,out} instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Move return address calculation and WINDOW_START adjustment out of the
retw helper to simplify logic a bit and avoid using registers directly.
Pass a0 as a parameter to the helper.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Opcodes that modify WINDOW_BASE SR don't have dependency on opcodes that
use windowed registers. If such opcodes are combined in a single
instruction they may not be correctly ordered. Instead of adding said
dependency use temporary register to store changed WINDOW_BASE value and
do actual register window rotation as a postprocessing step.
Not all opcodes that change WINDOW_BASE need this: retw, rfwo and rfwu
are also jump opcodes, so they are guaranteed to be translated last and
thus will not affect other opcodes in the same instruction.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Some opcodes may need additional actions at every exit from the
translated instruction or may need to amend TB exit slots available to
jumps generated for the instruction. Add gen_postprocess function and
call it from the gen_jump_slot and from the disas_xtensa_insn.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Opcodes in different slots may read and write same resources (registers,
states). In the absence of resource dependency loops it must be possible
to sort opcodes to avoid interference.
Record resources used by each opcode in the bundle. Build opcode
dependency graph and use topological sort to order its nodes. In case of
success translate opcodes in sort order. In case of failure report and
raise invalid opcode exception.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
