The behaviour of the Address Translation Mode on Interrupt resource is
not consistently supported by all CPU versions or all KVM versions: KVM
HV does not support mode 2, and does not support mode 3 on POWER7 or
early POWER9 processesors. KVM PR only supports mode 0. TCG supports all
modes (0, 2, 3) on CPUs with support for the corresonding LPCR[AIL] mode.
This leads to inconsistencies in guest behaviour and could cause problems
migrating guests.
This was not noticable for Linux guests for a long time because the
kernel only uses modes 0 and 3, and it used to consider AIL-3 to be
advisory in that it would always keep the AIL-0 vectors around, so it
did not matter whether or not interrupts were delivered according to
the AIL mode. Recent Linux guests depend on AIL mode 3 working as
specified in order to support the SCV facility interrupt. If AIL-3 can
not be provided, then H_SET_MODE must return an error to Linux so it can
disable the SCV facility (failure to do so can lead to userspace being
able to crash the guest kernel).
Add the ail-mode-3 capability to specify that AIL-3 is supported. AIL-0
is implied as the baseline, and AIL-2 is no longer supported by spapr.
AIL-2 is not known to be used by any software, but support in TCG could
be restored with an ail-mode-2 capability quite easily if a regression
is reported.
Modify the H_SET_MODE Address Translation Mode on Interrupt resource
handler to check capabilities and correctly return error if not
supported.
KVM has a cap to advertise support for AIL-3.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515160216.394612-1-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This optional behavior was removed from the ISA in v3.0, see
Summary of Changes preface:
Data Storage Interrupt Status Register for Alignment Interrupt:
Simplifies the Alignment interrupt by remov- ing the Data Storage
Interrupt Status Register (DSISR) from the set of registers modified
by the Alignment interrupt.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20230515092655.171206-5-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Some 32-bit SPRs are incorrectly implemented as 64-bits on 64-bit
targets.
This changes VRSAVE, DSISR, HDSISR, DAWRX0, PIDR, LPIDR, DEXCR,
HDEXCR, CTRL, TSCR, MMCRH, and PMC[1-6] from to be 32-bit registers.
This only goes by the 32/64 classification in the architecture, it
does not try to implement finer details of SPR implementation (e.g.,
not all bits implemented as simple read/write storage).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Message-Id: <20230515092655.171206-2-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The following commits changed the code such that the fallback to MFSS for MFFSCRN,
MFFSCRNI, MFFSCE and MFFSL on pre 3.0 ISAs was removed and became an illegal instruction:
bf8adfd88b - target/ppc: Move mffscrn[i] to decodetree
394c2e2fda - target/ppc: Move mffsce to decodetree
3e5bce70ef - target/ppc: Move mffsl to decodetree
The hardware will handle them as a MFFS instruction as the code did previously.
This means applications that were segfaulting under qemu when encountering these
instructions which is used in glibc libm functions for example.
The fallback for MFFSCDRN and MFFSCDRNI added in a later patch was also missing.
This patch restores the fallback to MFSS for these instructions on pre 3.0s ISAs
as the hardware decoder would, fixing the segfaulting libm code. It doesn't have
the fallback for 3.0 onwards to match hardware behaviour.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reviewed-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230510111913.1718734-1-richard.purdie@linuxfoundation.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZHB6VwAKCRBAov/yOSY+
390YA/98bGE+W8NGBoKI4sxke6LE6jbF1vYiOz4DiqvbGFcyL+sYKnlN92mpfNaP
K8BlgD3kvL7wV/DtCGTq4c0aAtUmSZNCC1w7PSlOkFxkJ+QONQGMGZKmI75BRYdY
Q/JQxUG02Hm4K/ghJDMGAm3+m+VaZaqxYNCv/6gLhmTERB5l5A==
=yu/e
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20230526' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20230526
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEIAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZHB6VwAKCRBAov/yOSY+
# 390YA/98bGE+W8NGBoKI4sxke6LE6jbF1vYiOz4DiqvbGFcyL+sYKnlN92mpfNaP
# K8BlgD3kvL7wV/DtCGTq4c0aAtUmSZNCC1w7PSlOkFxkJ+QONQGMGZKmI75BRYdY
# Q/JQxUG02Hm4K/ghJDMGAm3+m+VaZaqxYNCv/6gLhmTERB5l5A==
# =yu/e
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 May 2023 02:22:31 AM PDT
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20230526' of https://gitlab.com/gaosong/qemu:
target/loongarch: Fix the vinsgr2vr/vpickve2gr instructions cause system coredump
target/loongarch: Fix LD/ST{LE/GT} instructions get wrong CSR_ERA and CSR_BADV
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
without "--nodefaults" in builds that used "--without-default-devices"
* Improve qtests for such builds
* Add up-/downsampling qtest
* Avoid crash if default RAM backend name has been stolen
* Fix reentrant DMA problem in the lsi53c895a device (CVE-2023-0330)
-----BEGIN PGP SIGNATURE-----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=eab7
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2023-05-26' of https://gitlab.com/thuth/qemu into staging
* Use MachineClass->default_nic in more machines to allow running them
without "--nodefaults" in builds that used "--without-default-devices"
* Improve qtests for such builds
* Add up-/downsampling qtest
* Avoid crash if default RAM backend name has been stolen
* Fix reentrant DMA problem in the lsi53c895a device (CVE-2023-0330)
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmRwdqsRHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXk6g//eQzVGv1Ep4ZusQXPDpFJLgBNq7JMOF6a
# bWa6fTluzCn2ivnbgPEf0lV1TsCrUuQwqWlEozylltE6l4zbmIWBMO8F/6Wy0JZH
# DuBrO9fio+nKhcEqeFLE+wTWUCiBqM66n8LL+rznO3RjXv2QU8zhk9owmsEKZUV0
# vXrMO5XdUO/dTrxyBdVjbok9L1UpkF+Sp9LEHNxIJZnAqhVmx13jnKq6WTrDR/fX
# ZwGbwWxsnTZl5PuPsHePdTWhXigzZJYcI5TSfcdTVHbzIxVKzFIvTX7stKxySL3b
# 3rXqmkmdozi28UPq7kXvLRoN8VscORgC3J+0izVxd1P0q+sh6p+hF/8T1r0UCqWa
# cgPoqGP5fcqfQiQxdaPbm3Ar9qscZPqzpZWxzjFQsptxf69RIEg+8XZq/EP+6g+c
# GxCh1cqugLdWvZPpBjoGIDlftxJZ99rMKnOZJEudaAIDzRWbNBuqzVo5osj8n5ht
# m68Nanlil451+ySuTS7iiWyyKXF6hIfe5I6A72QdxMPeHsavcCk5D5AN76dFSTmN
# XWWqlk9CNYbvaYSIqyxJpANiwA5Y0j7r6GVXdWFZ9YRt//+z2rMwOrZIqYyvoscE
# 5p+ul/qgUq10XkNwI9t1pd9DX8g+5yuIY0chfC9G1B0AuiPHzvmszORBYY+8+7GT
# 2Rwq/HqraC4=
# =eab7
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 May 2023 02:06:51 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2023-05-26' of https://gitlab.com/thuth/qemu:
hw/scsi/lsi53c895a: Fix reentrancy issues in the LSI controller (CVE-2023-0330)
lsi53c895a: disable reentrancy detection for MMIO region, too
machine: do not crash if default RAM backend name has been stolen
tests/qtest/ac97-test: add up-/downsampling tests
tests/qtest/usb-hcd-ehci-test: Check for EHCI and UHCI HCDs before using them
tests/qtest/rtl8139-test: Check whether the rtl8139 device is available
tests/qtest: Check for virtio-blk before using -cdrom with the arm virt machine
tests/qtest/usb-hcd-uhci-test: Check whether "usb-storage" is available
hw/mips: Use MachineClass->default_nic in the virt machine
hw/arm: Use MachineClass->default_nic in the sbsa-ref machine
hw/xtensa: Use MachineClass->default_nic in the virt machine
hw/loongarch64: Use MachineClass->default_nic in the virt machine
hw/arm: Use MachineClass->default_nic in the virt machine
hw/alpha: Use MachineClass->default_nic in the alpha machine
hw/hppa: Use MachineClass->default_nic in the hppa machine
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change Hexagon maintainer from Taylor Simpson to Brian Cain
Put Taylor's gmail address in .mailmap
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org
Message-Id: <20230524165355.3157700-2-tsimpson@quicinc.com>
Some code comments refer to hex_new_value and hex_new_pred_value, which
have been transferred to DisasContext and, in the case of hex_new_value,
should now be accessed through get_result_gpr().
In order to fix this outdated comments and also avoid having to tweak
them whenever we make a variable name change in the future, let's
replace them with pseudocode.
Suggested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <8e1689e28dd7b1318369b55127cf47b82ab75921.1684939078.git.quic_mathbern@quicinc.com>
Many Hexagon python scripts call hex_common.get_tagregs(), but only one
call site use the full reg structure given by this function. To make the
code cleaner, let's make get_tagregs() filter out the unused fields
(i.e. 'toss' and 'numregs'), properly removed the unused variables at
the call sites. The hex_common.bad_register() function is also adjusted
to work exclusively with 'regtype' and 'regid' args. For the single call
site that does use toss/numregs, we provide an optional parameter to
get_tagregs() which will restore the old full behavior.
Suggested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Message-Id: <3ffd4ccb972879f57f499705c624e8eaba7f8b52.1684939078.git.quic_mathbern@quicinc.com>
The order in which instructions are generated by gen_insn() influences
assignment to tmp registers. During generation, tmp instructions (e.g.
generate_V6_vassign_tmp) use vreg_src_off() to determine what kind of
register to use as source. If some instruction (e.g.
generate_V6_vmpyowh_64_acc) uses a tmp register but is generated prior
to the corresponding tmp instruction, the vregs_updated_tmp bit map
isn't updated in time.
Exmple:
{ v14.tmp = v16; v25 = v14 } This works properly because
generate_V6_vassign_tmp is generated before generate_V6_vassign
and the bit map is updated.
{ v15:14.tmp = vcombine(v21, v16); v25:24 += vmpyo(v18.w,v14.h) }
This does not work properly because vmpyo is generated before
vcombine and therefore the bit map does not yet know that there's
a tmp register.
The parentheses in the decoding function were in the wrong place.
Moving them to the correct location makes shuffling of .tmp vector
registers work as expected.
Signed-off-by: Marco Liebel <quic_mliebel@quicinc.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Tested-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Brian Cain <bcain@quicinc.com>
Message-Id: <20230522174708.464197-1-quic_mliebel@quicinc.com>
Move test infra to header file
check functions (always print line number on error)
USR manipulation
Useful floating point values
Use stdint.h types
Use stdbool.h bool where appropriate
Use trip counts local to for loop
Suggested-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Tested-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230522174341.1805460-1-tsimpson@quicinc.com>
Setting the MAKE variable to a GNU Make executable does not really have
any effect: if a non-GNU Make is used, the QEMU Makefile will fail to
parse. Just remove everything related to --make and $make as dead code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By using a subproject, our own meson.build can use variables from
the subproject instead of hard-coded paths. This is also the first step
towards managing downloads with .wrap files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent dtc/libfdt can use either Make or meson as the build system.
By using a subproject, our own meson.build can remove the hard
coded list of source files.
This is also the first step towards managing downloads with .wrap
files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
fdt_opt == 'disabled' is going to give an error if libfdt is required
by any target, so catch that immediately. For fdt_opt == 'enabled',
instead, do not check immediately whether the internal libfdt is present.
Instead do the check after ascertaining that libfdt is absent or too old.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VirtioInfoList is already allocated by QAPI_LIST_PREPEND and
need not be allocated by the caller.
Fixes Coverity CID 1508724.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is recommended to use SSIZE_T for ssize_t on win32, but the commit
that is being used for slirp.wrap uses int. Update to include the fix
as well as the other bugfix commit "ip: Enforce strict aliasing".
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We recently moved glib detection code to meson but this changes the
linker command line from -lglib-2.0 to using a path to libglib-2.0.so.
This does not work for static linking, which is used by stress.c:
$ make V=1 tests/migration/initrd-stress.img
cc -m64 -mcx16 -o tests/migration/stress ... -static -Wl,--start-group
/usr/lib64/libglib-2.0.so -Wl,--end-group
...
bin/ld: attempted static link of dynamic object `/usr/lib64/libglib-2.0.so'
Add a specific dependency for stress.c, which is linked statically.
The compiler command line is now:
cc -m64 -mcx16 -o tests/migration/stress ... -static -pthread
-Wl,--start-group -lm /usr/lib64/libpcre.a -lglib-2.0 -Wl,--end-group
Fixes: fc9a809e0d ("build: move glib detection and workarounds to meson")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20230525212044.30222-3-farosas@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vinsgr2vr/vpickve2gr instructions need use get_src/get_dst to get
gpr registers value, not cpu_gpr[]. The $zero register does not
have cpu_gpr[0] allocated.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1662
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230525120005.2223413-1-gaosong@loongson.cn>
1.helper_asrtle_d/helper_asrtgt_d need use GETPC() to get PC;
2 LD/ST{LE/GT} need set CSR_BADV = gpr[rj];
3 ASRTLE.D/ASRTGT.D also write CSR_BADV, but this value is random
and has no reference value.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230515130042.2719712-1-gaosong@loongson.cn>
Apart from CLICOLOR_FORCE and GREP_OPTIONS, there are other variables
that are listed in the Autoconf manual. While Autoconf neutralizes them
very early, and assumes it does not (yet) run in a shell that has "unset",
QEMU assumes that the user invoked configure under a POSIX shell, and
therefore can simply use "unset" to clear them.
CDPATH is particularly nasty because it messes up "cd ... && pwd".
Reported-by: Juan Quintela <quintela@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is now the same as $(PYTHON), since the latter always points at pyvenv/bin/python3.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARCH is always empty, so just define HOST_ARCH as the result of uname.
The incorrect definition was not being used because the "ifeq" statement
is wrong; replace it with the same idiom based on $(realpath) that the
main Makefile uses.
With this change, vm-build-netbsd in a configured tree will not use
the PYTHONPATH hack.
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ARCH is always empty, so just define HOST_ARCH as the result of uname.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We cannot use the generic reentrancy guard in the LSI code, so
we have to manually prevent endless reentrancy here. The problematic
lsi_execute_script() function has already a way to detect whether
too many instructions have been executed - we just have to slightly
change the logic here that it also takes into account if the function
has been called too often in a reentrant way.
The code in fuzz-lsi53c895a-test.c has been taken from an earlier
patch by Mauro Matteo Cascella.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1563
Message-Id: <20230522091011.1082574-1-thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
While trying to use a SCSI disk on the LSI controller with an
older version of Fedora (25), I'm getting:
qemu: warning: Blocked re-entrant IO on MemoryRegion: lsi-mmio at addr: 0x34
and the SCSI controller is not usable. Seems like we have to
disable the reentrancy checker for the MMIO region, too, to
get this working again.
The problem could be reproduced it like this:
./qemu-system-x86_64 -accel kvm -m 2G -machine q35 \
-device lsi53c810,id=lsi1 -device scsi-hd,drive=d0 \
-drive if=none,id=d0,file=.../somedisk.qcow2 \
-cdrom Fedora-Everything-netinst-i386-25-1.3.iso
Where somedisk.qcow2 is an image that contains already some partitions
and file systems.
In the boot menu of Fedora, go to
"Troubleshooting" -> "Rescue a Fedora system" -> "3) Skip to shell"
Then check "dmesg | grep -i 53c" for failure messages, and try to mount
a partition from somedisk.qcow2.
Message-Id: <20230516090556.553813-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
QEMU aborts when default RAM backend should be used (i.e. no
explicit '-machine memory-backend=' specified) but user
has created an object which 'id' equals to default RAM backend
name used by board.
$QEMU -machine pc \
-object memory-backend-ram,id=pc.ram,size=4294967296
Actual results:
QEMU 7.2.0 monitor - type 'help' for more information
(qemu) Unexpected error in object_property_try_add() at ../qom/object.c:1239:
qemu-kvm: attempt to add duplicate property 'pc.ram' to object (type 'container')
Aborted (core dumped)
Instead of abort, check for the conflicting 'id' and exit with
an error, suggesting how to remedy the issue.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2207886
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230522131717.3780533-1-imammedo@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test if the audio subsystem can handle extreme up- and down-
sampling ratios like 44100/1 and 1/44100. For some time these
used to trigger QEMU aborts. The test was taken from
https://gitlab.com/qemu-project/qemu/-/issues/71 where it was
used to demonstrate a very different issue.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230520113313.5177-1-vr_qemu@t-online.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The devices might not be available in the binary (e.g. when compiling
with "--without-default-devices"), so we have to check before we can
use them.
Message-Id: <20230525081016.1870364-5-thuth@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Though we are already using CONFIG_RTL8139_PCI in the meson.build file
for testing whether the rtl8139 device is available or not, this is not
enough: The CONFIG switch might have been selected by another target
(e.g. the mips fuloong2e machine has the rtl8139 chip soldered on the
board), so CONFIG_RTL8139_PCI ends up in config_all_devices and the
test then gets executed on x86. We need an additional run-time check
to be on the safe side to make this test also work when configure has
been run with "--without-default-devices".
Message-Id: <20230525081016.1870364-4-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The arm "virt" machine needs "virtio-blk-pci" for devices that get attached
via the "-cdrom" option. Since this is an optional device that might not
be available in the binary, we should check for the availability of this
device first before using it.
Message-Id: <20230525081016.1870364-3-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The "usb-storage" device might not have been compiled into the binary
(e.g. when compiling with "--without-default-devices"), so we have to
check first before using it.
Message-Id: <20230525081016.1870364-2-thuth@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Inspired-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230524122559.28863-1-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230524082037.1620952-1-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230523110435.1375774-6-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230523110435.1375774-5-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230523110435.1375774-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230523110435.1375774-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Mark the default NIC via the new MachineClass->default_nic setting
so that the machine-defaults code in vl.c can decide whether the
default NIC is usable or not (for example when compiling with the
"--without-default-devices" configure switch).
Message-Id: <20230523110435.1375774-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Constant formation improvements
- Replace MIPS_BE with HOST_BIG_ENDIAN
- General cleanups
tcg/riscv:
- Improve setcond
- Support movcond
- Support Zbb, Zba
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRvo9kdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/ECwf/eQSKdXsppLfgH1zj
1VYOfSHB7kKacm5s9de6n0n0aT5DdBYGT1VkYqczMyanpYrK5jHIyzxYIcxa2KjN
/pMRKALUTq1Aku1wvovpybUT9Qt38+6jHw0U9inj11NJIYX4bheVJon3gztOUBRp
O67Z22RdfBBu+jL6VD00AE8OhCfeU7CZ+Bj9oNRKYCxXyr1ASla9gfTDy8UG+h2k
WqNti04xmgXqOZ+pEQ+ZyOCzhCHNLm8XBCtFjWXBe30ibX1PwWdSXqkuUtddd5nJ
MEbzQV42RCk1CNRrFz0RoAJhpcOEiSeDcI3Vx/PN8xS5mIS2jaWqW+5sMyCcI54h
JcfcUg==
=GI+F
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20230525' of https://gitlab.com/rth7680/qemu into staging
tcg/mips:
- Constant formation improvements
- Replace MIPS_BE with HOST_BIG_ENDIAN
- General cleanups
tcg/riscv:
- Improve setcond
- Support movcond
- Support Zbb, Zba
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRvo9kdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/ECwf/eQSKdXsppLfgH1zj
# 1VYOfSHB7kKacm5s9de6n0n0aT5DdBYGT1VkYqczMyanpYrK5jHIyzxYIcxa2KjN
# /pMRKALUTq1Aku1wvovpybUT9Qt38+6jHw0U9inj11NJIYX4bheVJon3gztOUBRp
# O67Z22RdfBBu+jL6VD00AE8OhCfeU7CZ+Bj9oNRKYCxXyr1ASla9gfTDy8UG+h2k
# WqNti04xmgXqOZ+pEQ+ZyOCzhCHNLm8XBCtFjWXBe30ibX1PwWdSXqkuUtddd5nJ
# MEbzQV42RCk1CNRrFz0RoAJhpcOEiSeDcI3Vx/PN8xS5mIS2jaWqW+5sMyCcI54h
# JcfcUg==
# =GI+F
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 May 2023 11:07:21 AM PDT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20230525' of https://gitlab.com/rth7680/qemu: (23 commits)
tcg/riscv: Support CTZ, CLZ from Zbb
tcg/riscv: Implement movcond
tcg/riscv: Improve setcond expansion
tcg/riscv: Support CPOP from Zbb
tcg/riscv: Support REV8 from Zbb
tcg/riscv: Support rotates from Zbb
tcg/riscv: Use ADD.UW for guest address generation
tcg/riscv: Support ADD.UW, SEXT.B, SEXT.H, ZEXT.H from Zba+Zbb
tcg/riscv: Support ANDN, ORN, XNOR from Zbb
tcg/riscv: Probe for Zba, Zbb, Zicond extensions
disas/riscv: Decode czero.{eqz,nez}
tcg/mips: Replace MIPS_BE with HOST_BIG_ENDIAN
tcg/mips: Use qemu_build_not_reached for LO/HI_OFF
tcg/mips: Try three insns with shift and add in tcg_out_movi
tcg/mips: Try tb-relative addresses in tcg_out_movi
tcg/mips: Aggressively use the constant pool for n64 calls
tcg/mips: Use the constant pool for 64-bit constants
tcg/mips: Split out tcg_out_movi_two
tcg/mips: Split out tcg_out_movi_one
tcg/mips: Create and use TCG_REG_TB
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide EPYC-Rome CPU model not susceptible to XSAVES erratum
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj
bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU
LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u
CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr
3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D
na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A==
=A5Lp
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* hot-unplug fixes for ioport
* purge qatomic_mb_read/set from monitor
* build system fixes
* OHCI fix from gitlab
* provide EPYC-Rome CPU model not susceptible to XSAVES erratum
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRvGpEUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOa/Af/WS5/tmIlEYgH7UOPERQXNqf7+Jwj
# bA2wgqv3ZoQwcgp5f4EVjfA8ABfpGxLZy6xIdUSbWANb8lDJNuh/nPd/em3rWUAU
# LnJGGdo1vF31gfsVQnlzb7hJi3ur+e2f8JqkRVskDCk3a7YY44OCN42JdKWLrN9u
# CFf2zYqxMqXHjrYrY0Kx2oTkfGDZrfwUlx0vM4dHb8IEoxaplfDd8lJXQzjO4htr
# 3nPBPjQ+h08EeC7mObH4XoJE0omzovR10GkBo8K4q952xGOQ041Y/2YY7JwLfx0D
# na7IanVo+ZAmvTJZoJFSBwNnXkTMHvDH5+Hc45NSTsDBtz0YJhRxPw/z/A==
# =A5Lp
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 25 May 2023 01:21:37 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
monitor: do not use mb_read/mb_set
monitor: extract request dequeuing to a new function
monitor: introduce qmp_dispatcher_co_wake
monitor: cleanup fetching of QMP requests
monitor: cleanup detection of qmp_dispatcher_co shutting down
monitor: do not use mb_read/mb_set for suspend_cnt
monitor: add more *_locked() functions
monitor: allow calling monitor_resume under mon_lock
monitor: use QEMU_LOCK_GUARD a bit more
softmmu/ioport.c: make MemoryRegionPortioList owner of portio_list MemoryRegions
softmmu/ioport.c: QOMify MemoryRegionPortioList
softmmu/ioport.c: allocate MemoryRegionPortioList ports on the heap
usb/ohci: Set pad to 0 after frame update
meson: move -no-pie from linker to compiler
meson: fix rule for qemu-ga installer
meson.build: Fix glib -Wno-unused-function workaround
target/i386: EPYC-Rome model without XSAVES
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement with and without Zicond. Without Zicond, we were letting
the middle-end expand to a 5 insn sequence; better to use a branch
over a single insn.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out a helper function, tcg_out_setcond_int, which does not
always produce the complete boolean result, but returns a set of
flags to do so.
Based on 21af161984, the same improvement for loongarch64.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
