It makes a bit more sense to have the zero page handling of xbzrle
right where we save the zero page.
Also invert the exit condition to remove one level of indentation
which makes the next patch easier to grasp.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-6-farosas@suse.de>
We don't need the QEMUFile when we're already passing the
PageSearchStatus.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-5-farosas@suse.de>
'rs' is not used in that function. It's a leftover from commit
9360447d34 ("ram: Use MigrationStats for statistics").
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-4-farosas@suse.de>
Extract the ramblock parsing code into a routine that operates on the
sequence of headers from the stream and another the parses the
individual ramblock. This makes ram_load_precopy() easier to
comprehend.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184604.32364-3-farosas@suse.de>
Sometimes multifd sends just sync packet with no pages
(normal_num is 0). In this case the old value is being
preserved and being accounted for while only packet_len
is being transferred.
Reset it to 0 after sending and accounting for.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-5-elena.ufimtseva@oracle.com>
Previous commit cbec7eb768
"migration/multifd: Compute transferred bytes correctly"
removed accounting for packet_len in non-rdma
case, but the next_packet_size only accounts for pages, not for
the header packet (normal_pages * PAGE_SIZE) that is being sent
as iov[0]. The packet_len part should be added to account for
the size of MultiFDPacket and the array of the offsets.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-4-elena.ufimtseva@oracle.com>
In migration rate limiting atomic operations are used
to read the rate limit variables and transferred bytes and
they are expensive. Check first if rate_limit_max is equal
to RATE_LIMIT_DISABLED and return false immediately if so.
Note that with this patch we will also will stop flushing
by not calling qemu_fflush() from migration_transferred_bytes()
if the migration rate is not exceeded.
This should be fine since migration thread calls in the loop
migration_update_counters from migration_rate_limit() that
calls the migration_transferred_bytes() and flushes there.
Signed-off-by: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011184358.97349-2-elena.ufimtseva@oracle.com>
Change code that is:
int ret;
...
ret = foo();
if (ret[ < 0]?) {
to:
if (foo()[ < 0]) {
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-14-quintela@redhat.com>
Declare all variables that are only used inside a for loop inside the
for statement.
This makes clear that they are not used outside of the for loop.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-13-quintela@redhat.com>
Once there, all the uses are local to the for, so declare the variable
inside the for statement.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-12-quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-11-quintela@redhat.com>
Functions are long enough even without this.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-10-quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-9-quintela@redhat.com>
The only user was rdma, and its use is gone.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-8-quintela@redhat.com>
The only user of ram_control_save_page() and save_page() hook was
rdma. Just move the function to rdma.c, rename it to
rdma_control_save_page().
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-7-quintela@redhat.com>
There is only one flag called with: RAM_CONTROL_BLOCK_REG.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-6-quintela@redhat.com>
Instead of going through ram_control_load_hook(), call
qemu_rdma_registration_handle() directly.
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-5-quintela@redhat.com>
Once there:
- Remove unused data parameter
- unfold it in its callers
- change all callers to call qemu_rdma_registration_stop()
- We need to call QIO_CHANNEL_RDMA() after we check for migrate_rdma()
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-4-quintela@redhat.com>
Once there:
- Remove unused data parameter
- unfold it in its callers.
- change all callers to call qemu_rdma_registration_start()
- We need to call QIO_CHANNEL_RDMA() after we check for migrate_rdma()
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-3-quintela@redhat.com>
Helper to say if we are doing a migration over rdma.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011203527.9061-2-quintela@redhat.com>
RDMA was having trouble because
migrate_multifd_flush_after_each_section() can only be true or false,
but we don't want to send any flush when we are not in multifd
migration.
CC: Fabiano Rosas <farosas@suse.de
Fixes: 294e5a4034 ("multifd: Only flush once each full round of memory")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231011205548.10571-2-quintela@redhat.com>
This is intended to be a semantic revert of commit 9b09503752
("migration: run setup callbacks out of big lock"). There have been so
many changes since that commit (e.g. a new setup callback
dirty_bitmap_save_setup() that also needs to be adapted now), it's
easier to do the revert manually.
For snapshots, the bdrv_writev_vmstate() function is used during setup
(in QIOChannelBlock backing the QEMUFile), but not holding the BQL
while calling it could lead to an assertion failure. To understand
how, first note the following:
1. Generated coroutine wrappers for block layer functions spawn the
coroutine and use AIO_WAIT_WHILE()/aio_poll() to wait for it.
2. If the host OS switches threads at an inconvenient time, it can
happen that a bottom half scheduled for the main thread's AioContext
is executed as part of a vCPU thread's aio_poll().
An example leading to the assertion failure is as follows:
main thread:
1. A snapshot-save QMP command gets issued.
2. snapshot_save_job_bh() is scheduled.
vCPU thread:
3. aio_poll() for the main thread's AioContext is called (e.g. when
the guest writes to a pflash device, as part of blk_pwrite which is a
generated coroutine wrapper).
4. snapshot_save_job_bh() is executed as part of aio_poll().
3. qemu_savevm_state() is called.
4. qemu_mutex_unlock_iothread() is called. Now
qemu_get_current_aio_context() returns 0x0.
5. bdrv_writev_vmstate() is executed during the usual savevm setup
via qemu_fflush(). But this function is a generated coroutine wrapper,
so it uses AIO_WAIT_WHILE. There, the assertion
assert(qemu_get_current_aio_context() == qemu_get_aio_context());
will fail.
To fix it, ensure that the BQL is held during setup. While it would
only be needed for snapshots, adapting migration too avoids additional
logic for conditional locking/unlocking in the setup callbacks.
Writing the header could (in theory) also trigger qemu_fflush() and
thus bdrv_writev_vmstate(), so the locked section also covers the
qemu_savevm_state_header() call, even for migration for consistency.
The section around multifd_send_sync_main() needs to be unlocked to
avoid a deadlock. In particular, the multifd_save_setup() function calls
socket_send_channel_create() using multifd_new_send_channel_async() as a
callback and then waits for the callback to signal via the
channels_ready semaphore. The connection happens via
qio_task_run_in_thread(), but the callback is only executed via
qio_task_thread_result() which is scheduled for the main event loop.
Without unlocking the section, the main thread would never get to
process the task result and the callback meaning there would be no
signal via the channels_ready semaphore.
The comment in ram_init_bitmaps() was introduced by 4987783400
("migration: fix incorrect memory_global_dirty_log_start outside BQL")
and is removed, because it referred to the qemu_mutex_lock_iothread()
call.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231013105839.415989-1-f.ebner@proxmox.com>
Make the migration json writer part of MigrationState struct, allowing
the 'configuration' object be serialized to json.
This will facilitate the parsing of the 'configuration' object in the
next patch that fixes analyze-migration.py for arm.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231009184326.15777-2-farosas@suse.de>
qemu_ram_block_from_host() may return NULL, which will be dereferenced w/o
check. Usualy return value is checked for this function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Frolov <frolov@swemel.ru>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231010104851.802947-1-frolov@swemel.ru>
Migration bandwidth is a very important value to live migration. It's
because it's one of the major factors that we'll make decision on when to
switchover to destination in a precopy process.
This value is currently estimated by QEMU during the whole live migration
process by monitoring how fast we were sending the data. This can be the
most accurate bandwidth if in the ideal world, where we're always feeding
unlimited data to the migration channel, and then it'll be limited to the
bandwidth that is available.
However in reality it may be very different, e.g., over a 10Gbps network we
can see query-migrate showing migration bandwidth of only a few tens of
MB/s just because there are plenty of other things the migration thread
might be doing. For example, the migration thread can be busy scanning
zero pages, or it can be fetching dirty bitmap from other external dirty
sources (like vhost or KVM). It means we may not be pushing data as much
as possible to migration channel, so the bandwidth estimated from "how many
data we sent in the channel" can be dramatically inaccurate sometimes.
With that, the decision to switchover will be affected, by assuming that we
may not be able to switchover at all with such a low bandwidth, but in
reality we can.
The migration may not even converge at all with the downtime specified,
with that wrong estimation of bandwidth, keeping iterations forever with a
low estimation of bandwidth.
The issue is QEMU itself may not be able to avoid those uncertainties on
measuing the real "available migration bandwidth". At least not something
I can think of so far.
One way to fix this is when the user is fully aware of the available
bandwidth, then we can allow the user to help providing an accurate value.
For example, if the user has a dedicated channel of 10Gbps for migration
for this specific VM, the user can specify this bandwidth so QEMU can
always do the calculation based on this fact, trusting the user as long as
specified. It may not be the exact bandwidth when switching over (in which
case qemu will push migration data as fast as possible), but much better
than QEMU trying to wildly guess, especially when very wrong.
A new parameter "avail-switchover-bandwidth" is introduced just for this.
So when the user specified this parameter, instead of trusting the
estimated value from QEMU itself (based on the QEMUFile send speed), it
trusts the user more by using this value to decide when to switchover,
assuming that we'll have such bandwidth available then.
Note that specifying this value will not throttle the bandwidth for
switchover yet, so QEMU will always use the full bandwidth possible for
sending switchover data, assuming that should always be the most important
way to use the network at that time.
This can resolve issues like "unconvergence migration" which is caused by
hilarious low "migration bandwidth" detected for whatever reason.
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231010221922.40638-1-peterx@redhat.com>
Current migration_completion function is a bit long. Refactor the long
implementation into different subfunctions:
- migration_completion_precopy: completion code related to precopy
- migration_completion_postcopy: completion code related to postcopy
Rename await_return_path_close_on_source to
close_return_path_on_source: It is renamed to match with
open_return_path_on_source.
This improves readability and is easier for future updates (e.g. add new
subfunctions when completion code related to new features are needed). No
functional changes intended.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230804093053.5037-1-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_first_blk() and bdrv_is_root_node() need to hold a reader lock
for the graph. These functions are the only functions in block-backend.c
that access the parent list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20230929145157.45443-5-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's just a simple wrapper for rp_sem on either wait() or kick(), make it
even clearer on how it is used. Prepared to be used even for other things.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-ID: <20231004220240.167175-8-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of only relying on the count of rp_sem, make the counter be part of
RAMState so it can be used in both threads to synchronize on the process.
rp_sem will be further reused in follow up patches, as a way to kick the
main thread, e.g., on recovery failures.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-7-peterx@redhat.com>
There're a lot of cases where we only have an errno set in last_error but
without a detailed error description. When this happens, try to generate
an error contains the errno as a descriptive error.
This will be helpful in cases where one relies on the Error*. E.g.,
migration state only caches Error* in MigrationState.error. With this,
we'll display correct error messages in e.g. query-migrate when the error
was only set by qemu_file_set_error().
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-6-peterx@redhat.com>
Introduce a helper to detect whether MigrationState.error is set for
whatever reason.
This is preparation work for any thread (e.g. source return path thread) to
setup errors in an unified way to MigrationState, rather than relying on
its own way to set errors (mark_source_rp_bad()).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-3-peterx@redhat.com>
Display it as long as being set, irrelevant of FAILED status. E.g., it may
also be applicable to PAUSED stage of postcopy, to provide hint on what has
gone wrong.
The error_mutex seems to be overlooked when referencing the error, add it
to be very safe.
This will change QAPI behavior by showing up error message outside !FAILED
status, but it's intended and doesn't expect to break anyone.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2018404
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231004220240.167175-2-peterx@redhat.com>
qemu_rdma_dump_id() dumps RDMA device details to stdout.
rdma_start_outgoing_migration() calls it via qemu_rdma_source_init()
and qemu_rdma_resolve_host() to show source device details.
rdma_start_incoming_migration() arranges its call via
rdma_accept_incoming_migration() and qemu_rdma_accept() to show
destination device details.
Two issues:
1. rdma_start_outgoing_migration() can run in HMP context. The
information should arguably go the monitor, not stdout.
2. ibv_query_port() failure is reported as error. Its callers remain
unaware of this failure (qemu_rdma_dump_id() can't fail), so
reporting this to the user as an error is problematic.
Fixable, but the device detail dump is noise, except when
troubleshooting. Tracing is a better fit. Similar function
qemu_rdma_dump_id() was converted to tracing in commit
733252deb8 (Tracify migration/rdma.c).
Convert qemu_rdma_dump_id(), too.
While there, touch up qemu_rdma_dump_gid()'s outdated comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-54-armbru@redhat.com>
error_report() obeys -msg, reports the current error location if any,
and reports to the current monitor if any. Reporting to stderr
directly with fprintf() or perror() is wrong, because it loses all
this.
Fix the offenders. Bonus: resolves a FIXME about problematic use of
errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-53-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init(), qemu_rdma_connect(),
rdma_start_incoming_migration(), and rdma_start_outgoing_migration()
violate this principle: they call error_report() via
qemu_rdma_cleanup().
Moreover, qemu_rdma_cleanup() can't fail. It is called on error
paths, and QIOChannel close and finalization. Are the conditions it
reports really errors? I doubt it.
Downgrade qemu_rdma_cleanup()'s errors to warnings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-52-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_write_one() violates this principle: it reports errors to
stderr via qemu_rdma_register_and_get_keys(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up: silence qemu_rdma_register_and_get_keys(). I believe
the caller's error reports suffice. If they don't, we need to convert
to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-51-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_post_send_control(), qemu_rdma_exchange_get_response(), and
qemu_rdma_write_one() violate this principle: they call
error_report(), fprintf(stderr, ...), and perror() via
qemu_rdma_block_for_wrid(), qemu_rdma_poll(), and
qemu_rdma_wait_comp_channel(). I elected not to investigate how
callers handle the error, i.e. precise impact is not known.
Clean this up by dropping the error reporting from qemu_rdma_poll(),
qemu_rdma_wait_comp_channel(), and qemu_rdma_block_for_wrid(). I
believe the callers' error reports suffice. If they don't, we need to
convert to Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-50-armbru@redhat.com>
When qemu_rdma_wait_comp_channel() receives an event from the
completion channel, it reports an error "receive cm event while wait
comp channel,cm event is T", where T is the numeric event type.
However, the function fails only when T is a disconnect or device
removal. Events other than these two are not actually an error, and
reporting them as an error is wrong. If we need to report them to the
user, we should use something else, and what to use depends on why we
need to report them to the user.
For now, report this error only when the function actually fails.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-49-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() and qemu_rdma_accept() violate this principle:
they call error_report() via qemu_rdma_reg_control(). I elected not
to investigate how callers handle the error, i.e. precise impact is
not known.
Clean this up by dropping the error reporting from
qemu_rdma_reg_control(). I believe the callers' error reports
suffice. If they don't, we need to convert to Error instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-48-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_connect() violates this principle: it calls error_report()
and perror(). I elected not to investigate how callers handle the
error, i.e. precise impact is not known.
Clean this up: replace perror() by changing error_setg() to
error_setg_errno(), and drop error_report(). I believe the callers'
error reports suffice then. If they don't, we need to convert to
Error instead.
Bonus: resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-47-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_resolve_host() violates this principle: it calls
error_report().
Clean this up: drop error_report().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-46-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_source_init() violates this principle: it calls
error_report() via qemu_rdma_alloc_pd_cq(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_alloc_pd_cq() to Error.
The conversion loses a piece of advice on one of two failure paths:
Your mlock() limits may be too low. Please check $ ulimit -a # and search for 'ulimit -l' in the output
Not worth retaining.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-45-armbru@redhat.com>
Just for symmetry with qemu_rdma_post_send_control(). Error messages
lose detail I consider of no use to users.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-44-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() violates this principle: it calls
error_report() via qemu_rdma_post_send_control(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_post_send_control() to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-43-armbru@redhat.com>
Just for consistency with qemu_rdma_write_one() and
qemu_rdma_write_flush(), and for slightly simpler code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-42-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_write_flush() violates this principle: it calls
error_report() via qemu_rdma_write_one(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_write_one() to Error. Bonus:
resolves a FIXME about problematic use of errno.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-41-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qio_channel_rdma_writev() violates this principle: it calls
error_report() via qemu_rdma_write_flush(). I elected not to
investigate how callers handle the error, i.e. precise impact is not
known.
Clean this up by converting qemu_rdma_write_flush() to Error.
Necessitates setting an error when qemu_rdma_write_one() failed.
Since this error will go away later in this series, simply use "FIXME
temporary error message" there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-40-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() violates this principle: it calls
error_report() via callback qemu_rdma_reg_whole_ram_blocks(). I
elected not to investigate how callers handle the error, i.e. precise
impact is not known.
Clean this up by converting the callback to Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-39-armbru@redhat.com>
Functions that use an Error **errp parameter to return errors should
not also report them to the user, because reporting is the caller's
job. When the caller does, the error is reported twice. When it
doesn't (because it recovered from the error), there is no error to
report, i.e. the report is bogus.
qemu_rdma_exchange_send() and qemu_rdma_exchange_recv() violate this
principle: they call error_report() via
qemu_rdma_exchange_get_response(). I elected not to investigate how
callers handle the error, i.e. precise impact is not known.
Clean this up by converting qemu_rdma_exchange_get_response() to
Error.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230928132019.2544702-38-armbru@redhat.com>
