Add parameter errp to memory_region_init_rom_device and update all call
sites to propagate the error.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[Propagate the error out of realize. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add parameter errp to memory_region_init_ram and update all call sites
to pass in &error_abort.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A drive that backs a pflash device is special:
- it is very small,
- its entire contents are kept in a RAMBlock at all times, covering the
guest-phys address range that provides the guest's view of the emulated
flash chip.
The pflash device model keeps the drive (the host-side file) and the
guest-visible flash contents in sync. When migrating the guest, the
guest-visible flash contents (the RAMBlock) is migrated by default, but on
the target host, the drive (the host-side file) remains in full sync with
the RAMBlock only if:
- the source and target hosts share the storage underlying the pflash
drive,
- or the migration requests full or incremental block migration too, which
then covers all drives.
Due to the special nature of pflash drives, the following scenario makes
sense as well:
- no full nor incremental block migration, covering all drives, alongside
the base migration (justified eg. by shared storage for "normal" (big)
drives),
- non-shared storage for pflash drives.
In this case, currently only those portions of the flash drive are updated
on the target disk that the guest reprograms while running on the target
host.
In order to restore accord, dump the entire flash contents to the bdrv in
a post_load() callback.
- The read-only check follows the other call-sites of pflash_update();
- both "pfl->ro" and pflash_update() reflect / consider the case when
"pfl->bs" is NULL;
- the total size of the flash device is calculated as in
pflash_cfi01_realize().
When using shared storage, or requesting full or incremental block
migration along with the normal migration, the patch should incur a
harmless rewrite from the target side.
It is assumed that, on the target host, RAM is loaded ahead of the call to
pflash_post_load().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that drive_del acquires the AioContext we can safely allow deleting
the drive. As with non-dataplane mode, all I/Os submitted by the guest
after drive_del will return EIO.
This patch makes hot unplug work with virtio-blk dataplane. Previously
drive_del reported an error because the device was busy.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
reporting from Fam and a fix for DPRINTF bitrot. Memory patches try
again to initialize name from the QOM name.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=iLTP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI patches include bug fixes from Fam and Peter, improved error
reporting from Fam and a fix for DPRINTF bitrot. Memory patches try
again to initialize name from the QOM name.
# gpg: Signature made Thu 28 Aug 2014 15:10:31 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
memory: Lazy init name from QOM name as needed
xen: hvm: Abstract away memory region name ref
xen-hvm: Constify string
virtio-scsi: Report error if num_queues is 0 or too large
scsi-generic: remove superfluous DPRINTF avoid to break compiling
block/iscsi: fix memory corruption on iscsi resize
scsi-bus: Convert DeviceClass init to realize
block: Pass errp in blkconf_geometry
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows us to pass error information to caller.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In function virtio_blk_handle_request, it may freed memory pointed by req,
So do not access member of req after calling this function.
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that block_resize acquires the AioContext we can safely allow
resizing the disk.
Reported-by: Andrey Korolyov <andrey@xdel.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is safer than g_malloc(sizeof(*v) * n) for two reasons.
One, it catches multiplication overflowing size_t. Two, it returns
T * rather than void *, which lets the compiler catch more type
errors.
Perhaps a conversion to g_malloc_n() would be neater in places, but
that's merely four years old, and we can't use such newfangled stuff.
This commit only touches allocations with size arguments of the form
sizeof(T), plus two that use 4 instead of sizeof(uint32_t). We can
make the others safe by converting to g_malloc_n() when it becomes
available to us in a couple of years.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Memory changes for QOMification and automatic tracking of MR lifetime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=M+/m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is empty after the previous patch, so remove it.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Without this correction, only a three descriptor layout is accepted, and
requests with just two descriptors are not completed and no error message is
displayed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Marc Marí <marc.mari.barcelo@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If we fail to set up guest or host notifiers, there's no use trying again
every time the guest kicks, so disable dataplane in that case.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The dataplane code is currently doing a hard exit if it fails to set
up either guest or host notifiers. In practice, this may mean that a
guest suddenly dies after a dataplane device failed to come up (e.g.,
when a file descriptor limit is hit for tne nth device).
Let's just try to unwind the setup instead and return.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Setting up guest or host notifiers may fail, but the user will have
no idea why: Let's print the error returned by the callback.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now requests are submitted as a batch, so it is natural
to notify guest as a batch too.
This may suppress interrupt notification to VM a lot:
- in my test, decreased by ~13K/sec
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The callback has to be saved and reset in virtio_blk_data_plane_start(),
otherwise dataplane's requests will be completed in qemu aio context.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block layer fails such reads and writes just fine. However, they
then get treated like valid operations that fail: the error action
gets executed. Unwanted; reporting the error to the guest is the only
sensible action.
Reject them before passing them to the block layer. This bypasses the
error action and I/O accounting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a device model's I/O operation fails, we execute the error
action. This lets layers above QEMU implement thin provisioning, or
attempt to correct errors before they reach the guest. But when the
I/O operation fails because it's invalid, reporting the error to the
guest is the only sensible action.
If the guest's read or write asks for an invalid sector range, fail
the request right away, without considering the error action. No
change with error action BDRV_ACTION_REPORT.
Furthermore, bypass I/O accounting, because we want to track only I/O
that actually reaches the block layer.
The next commit will extend "invalid sector range" to cover attempts
to read/write beyond the end of the medium.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The memory allocation between hw/block/virtio-blk.c,
hw/block/dataplane/virtio-blk.c, and hw/virtio/dataplane/vring.c is
messy. Structs are allocated in different files than they are freed in.
This is risky and makes memory leaks easier.
Embed VirtQueueElement in VirtIOBlockReq to reduce the amount of memory
allocation we need to juggle. This also makes vring.c and virtio.c
slightly more similar.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In commit de6c8042ec ("virtio-blk: Avoid
zeroing every request structure") we avoided the 40 KB memset when
allocating VirtIOBlockReq.
The memset was reintroduced in commit
671ec3f056 ("virtio-blk: Convert
VirtIOBlockReq.elem to pointer").
It must be fixed again to avoid a performance regression.
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VirtIOBlockReq is freed later by virtio_blk_free_request() in
hw/block/virtio-blk.c. Remove this extraneous g_slice_free().
This patch fixes the following segfault:
0x00005555556373af in virtio_blk_rw_complete (opaque=0x5555565ff5e0, ret=0) at hw/block/virtio-blk.c:99
99 bdrv_acct_done(req->dev->bs, &req->acct);
(gdb) print req
$1 = (VirtIOBlockReq *) 0x5555565ff5e0
(gdb) print req->dev
$2 = (VirtIOBlock *) 0x0
(gdb) bt
#0 0x00005555556373af in virtio_blk_rw_complete (opaque=0x5555565ff5e0, ret=0) at hw/block/virtio-blk.c:99
#1 0x0000555555840ebe in bdrv_co_em_bh (opaque=0x5555566152d0) at block.c:4675
#2 0x000055555583de77 in aio_bh_poll (ctx=ctx@entry=0x5555563a8150) at async.c:81
#3 0x000055555584b7a7 in aio_poll (ctx=0x5555563a8150, blocking=blocking@entry=true) at aio-posix.c:188
#4 0x00005555556e520e in iothread_run (opaque=0x5555563a7fd8) at iothread.c:41
#5 0x00007ffff42ba124 in start_thread () from /usr/lib/libpthread.so.0
#6 0x00007ffff16d14bd in clone () from /usr/lib/libc.so.6
Reported-by: Max Reitz <mreitz@redhat.com>
Cc: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Before commit 580b6b2aa2(dataplane: use the QEMU block
layer for I/O), dataplane for virtio-blk submits block
I/O as a batch.
This commit 580b6b2aa2 replaces the custom linux AIO
implementation(including submit I/O as a batch) with QEMU
block layer, but this commit causes ~40% throughput regression
on virtio-blk performance, and removing submitting I/O
as a batch is one of the causes.
This patch applies the newly introduced bdrv_io_plug() and
bdrv_io_unplug() interfaces to support submitting I/O
at batch for Qemu block layer, and in my test, the change
can improve throughput by ~30% with 'aio=native'.
Following my fio test script:
[global]
direct=1
size=4G
bsrange=4k-4k
timeout=40
numjobs=4
ioengine=libaio
iodepth=64
filename=/dev/vdc
group_reporting=1
[f]
rw=randread
Result on one of my small machine(host: x86_64, 2cores, 4thread, guest: 4cores):
- qemu master: 65K IOPS
- qemu master with these patches: 92K IOPS
- 2.0.0 release(dataplane using custom linux aio): 104K IOPS
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The x-data-plane=on|off option is no longer useful because the
iothread=<iothread> option conveys the same information plus which
IOThread to use.
Do not delete x-data-plane=on|off yet as a convenience to people using
this legacy experimental option. We will drop it in QEMU 2.2.
Instead, turn on data-plane when either x-data-plane=on or
iothread=<iothread> are used. The following command-line uses
data-plane:
qemu -device virtio-blk-pci,iothread=foo,drive=drive0
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Up until now -device virtio-blk-pci,x-iothread=<id> was used to assign
an IOThread. This was a temporary solution while we cleaned up QOM link
properties.
This patch switches over to a QOM link property since it is now possible
to restrict the setter to unrealized instances and automatically unref
the IOThread when the virtio-blk-pci device is freed.
Since the "iothread" property is a QOM property and not a qdev property,
we must alias it explicitly for virtio-blk-pci, as well as CCW and
s390-virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There is no need to make DEFINE_VIRTIO_BLK_PROPERTIES() public. Inline
it into virtio-blk.c so it cannot be used by mistake from other source
files.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
This function is no longer used since parent objects now use child
aliases to set the VirtIOBlkConf directly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
If the virtio transport does not support notifiers (like s390-virtio),
we can't use dataplane. Bail out early and let the user know what is
wrong.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Note that st*_raw and ld*_raw are effectively replaced by st*_p and ld*_p.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
[ pass VirtIODevice * to memory accessors,
Greg Kurz <gkurz@linux.vnet.ibm.com> ]
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In order to migrate virtio subsections, they should be streamed after
the device itself. We need the device specific code to be called from
the common migration code to achieve this. This patch introduces load
and save methods for this purpose.
Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The old name is misleading in its new usage, so rename it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This drops request handling code from dataplane, and uses code from
hw/block/virtio-blk.c.
It starts to use multiwrite as non-dataplane does.
Dataplane sets VirtIOBlock.complete_request to vring version, and calls
into non-dataplane's process handling. In complete_request_early,
qiov.size is added to vring push length, because it's also called in rw
completion now.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The BH must be called in the AioContext of bs. Currently it is only the
main loop, but with coming changes, it could also be a dataplane
IOThread.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
So that dataplane can use virtio_blk_handle_request and
virtio_submit_multiwrite.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio_blk_req_complete will call VirtIOBlock.complete_request() to push
data and notify guest. No functional change.
Later, this will allow dataplane to provide it's own (vring_) version.
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
out_sg is checked by iov_to_buf below, so it can be dropped.
Add assert and iov_discard_back around in_sg, as the in_sg is handled in
dataplane code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VirtIOBlockReq is allocated in process_request, and freed in command
functions.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The virtio code currently assumes that the outhdr is in its own iovec.
This is not guaranteed by the spec, so we should relax this assumption.
Convert the VirtIOBlockReq.out field to structrue so that we can use
iov_to_buf and then discard the header from the beginning of iovec.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In current virtio spec, inhdr is a single byte, and is unlikely to
change for both functionality and compatibility considerations.
Non-dataplane uses .in, and we are on the way to converge them. So
let's unify it to get cleaner code.
Remove .inhdr and use .in.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Field "inhdr" is added temporarily for a more mechanical change, and
will be dropped in the next commit.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since it's set but not used.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The block layer will handle the unaligned request.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This will make converging with dataplane code easier.
Add virtio_blk_free_request to handle the freeing of request internal
fields.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For later reusing by dataplane code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
By just never doing write-backs. This is completely invisible to the
guest, as the entire storage area is implemented as device state (at
realize time the entire drive is read in).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
sync_page() was conditionalizing it's whole fn body on the bdrv being
non-null. Just return for the function immediately on NULL brdv and
get rid of the big if.
Makes implementation consistent with flash_zynq_area().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the flash device is configured with a device-width which is
not equal to the bank-width, indicating that it is actually several
narrow flash devices in parallel, the CFI table should report the
number of blocks and the size of a single device, not of the whole
combined setup. This stops Linux from complaining:
"NOR chip too large to fit in mapping. Attempting to cope..."
As usual, we retain the old broken but backwards compatible behaviour
when the device-width is not specified.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1402409025-25694-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTkeeSAAoJEJykq7OBq3PIi9sIAIKVSHE/c6Tc4rGcIgPoAXTS
li9FCQ/vXFUehIe6MFMmf6OX08zKxBw18DLS6mLyqAn5lJGUWQBXiP+nXqgzhy5T
EoCtwE/n5fpbQuCVxXm+CsaGZc4IySyZ4FiwqAe4MysYKXkJbDGEF/TEzL+0vFw4
wEHZUQ3ykydJtPLtZVI3MNRmqRtk7zbq8So6g/FYB3VyIeyhMp1peWahHPLXGOQ/
phpk5G4Yk6p8TtjTe6lo4ajBzAprsxc052Jz+MaxbuihzfHjf2i62iLixcDDTUzz
6n/sCVsvorA6O6SJ/sMtkQs1N1cXoj3tKSIu8gh6zkAtlg/V6sSRaLCnQQtFQB4=
=xvq7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 06 Jun 2014 17:08:50 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (42 commits)
qapi: Extract qapi/block.json definitions
qapi: Extract qapi/block-core.json definitions
qapi: create two block related json modules
qapi: Extract qapi/common.json definitions
sheepdog: reload only header in a case of live snapshot
sheepdog: fix vdi object update after live snapshot
rbd: Fix leaks in rbd_start_aio() error path
qemu-img: Document check exit codes
block: fix wrong order in live block migration setup
blockdev: acquire AioContext in block_set_io_throttle
throttle: add detach/attach test case
throttle: add throttle_detach/attach_aio_context()
dataplane: Support VIRTIO_BLK_T_SCSI_CMD
virtio-blk: Factor out virtio_blk_handle_scsi_req from virtio_blk_handle_scsi
virtio-blk: Allow config-wce in dataplane
block: Move declaration of bdrv_get_aio_context to block.h
raw-posix: drop raw_get_aio_fd() since it is no longer used
dataplane: implement async flush
dataplane: delete IOQueue since it is no longer used
dataplane: use the QEMU block layer for I/O
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ld_raw and st_raw definitions are only needed in code that
must compile for both user-mode and softmmu emulation. Device
models can use the equivalent ld_p/st_p which are simple
pointer accessors.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The common logic to process a scsi request in a VirtQueueElement is
extracted to a function to share with dataplane.
This makes VirtIOBlockReq.scsi unused, so drop it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Dataplane now uses block layer. Protect bdrv_set_enable_write_cache with
aio_context_acquire and aio_context_release, so we can enable config-wce
to allow guest to modify the write cache online.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using the raw-posix file descriptor for synchronous
qemu_fdatasync(). Use bdrv_aio_flush() instead and drop the
VirtIOBlockDataPlane->fd field.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stop using a custom Linux AIO request queue from ioq.h and instead use
the QEMU block layer for I/O.
This patch adjusts the VirtIOBlockRequest struct with fields needed for
bdrv_aio_readv()/bdrv_aio_writev(). ioq.h used struct iovec and struct
iocb, which we don't need directly anymore.
Modify dataplane start/stop to set the AioContext on the
BlockDriverState. We also no longer need to get the raw-posix file
descriptor. This means image formats are now supported with dataplane!
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g. in place of starting block backup,
bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
There is one exception in block_job_create, where
bdrv_op_blocker_is_empty() is used, because we don't know the operation
type here. This doesn't matter because in a few commits away we will drop
the check and move it to callers that _do_ know the type.
- Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gg8m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20140515' into staging
migration/next for 20140515
# gpg: Signature made Thu 15 May 2014 02:32:25 BST using RSA key ID 5872D723
# gpg: Can't check signature: public key not found
* remotes/juanquintela/tags/migration/20140515:
usb: fix up post load checks
migration: show average throughput when migration finishes
savevm: Remove all the unneeded version_minimum_id_old (rest)
savevm: Remove all the unneeded version_minimum_id_old (usb)
Split ram_save_block
arch_init: Simplify code for load_xbzrle()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
After commit 767adce2d, they are redundant. This way we don't assign them
except when needed. Once there, there were lots of cases where the ".fields"
indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement discard support for xen_disk. It makes use of the existing
discard code in qemu.
The discard support is enabled unconditionally. The tool stack may
provide a property "discard-enable" in the backend node to optionally
disable discard support. This is helpful in case the backing file was
intentionally created non-sparse to avoid fragmentation.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.
Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Before IOThread was its own object, each virtio-blk device would create
its own internal thread. We need to preserve this behavior for
backwards compatibility when users do not specify -device
virtio-blk-pci,iothread=<id>.
This patch changes how the internal IOThread object is created.
Previously we used the monitor object_add() function, which is really a
layering violation. The problem is that this needs to assign a name but
we don't have a name for this internal object.
Generating names for internal objects is a pain but even worse is that
they may collide with user-defined names.
Paolo Bonzini <pbonzini@redhat.com> suggested that the internal IOThread
object should not be named. This way the conflict cannot happen and we
no longer need object_add().
One gotcha is that internal IOThread objects will not be listed by the
query-iothreads command since they are not named. This is okay though
because query-iothreads is new and the internal IOThread is just for
backwards compatibility. New users should explicitly define IOThread
objects.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It may not be sensible for normal use cases, but it allows to use
/dev/null in QTest.
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
When creating an IOThread implicitly (the user did not specify
x-iothread=<id>) remember that iothread_find() does not return the
object with an incremented refcount.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Today virtio-blk dataplane uses a 1:1 device-per-thread model. Now that
IOThreads have been introduced we can generalize this to N:M devices per
threads.
This patch drops thread code from dataplane in favor of running inside
an IOThread AioContext.
As a bonus we solve the case where a guest keeps submitting I/O requests
while dataplane is trying to stop. Previously the dataplane thread
would continue to process requests until the request gave it a break.
Now we can shut down in bounded time thanks to
aio_context_acquire/release.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If enabled, set the thread name at creation (on GNU systems with
pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_acct_done was called unconditional. But in case the ioreq has no
segments there is no matching bdrv_acct_start call. This could lead to
bogus accounting values.
Found by code inspection.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Replace them with uint8/32/64.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit 7426aa72c3 (nand: Don't inherit
from Sysbus) changed the parent type of TYPE_NAND but continued to use
qdev_create(), which handled a NULL BusState as SysBus.
Use object_new() instead, and reuse the TYPE_NAND define while at it.
Reported-by: Markus Armbruster <armbru@redhat.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The alignment field is now set to the value that is promised to the
guest, rather than required by the host. The next patches will make
QEMU aware of the host-provided values, so make this clear.
The alignment is also not about memory buffers, but about the sectors on
the disk, change the documentation of the field.
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Drop it when there's no obvious reason why device_add could not work.
Else keep and document why.
* isa-fdc: drop
* i8042: drop, even though its I/O base is hardcoded (because you
could conceivably still add one to a board that has none), and even
though PC board code wires up the A20 line (because that wiring is
optional)
* port92: keep because it needs additional wiring by port92_init()
* mc146818rtc: keep because it needs to be wired up by rtc_init()
* m48t59_isa: keep because needs to be wired up by m48t59_init_isa()
* isa-pit, kvm-pit: keep (in their abstract base pic-common) because
the PIT needs additional wiring by board code, depending on HPET
presence
* pcspk: keep because of pointer property pit, and because realize
sets global pcspk_state
* vmmouse: keep because of pointer property ps2_mouse
* vmport: keep because realize sets global port_state
* isa-i8259, kvm-i8259: keep (in their abstract base pic-common),
because the PICs' IRQ input lines are set up by board code, and the
wiring of the slave to the master is hard-coded in device model code
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In an ideal world, machines can be built by wiring devices together
with configuration, not code. Unfortunately, that's not the world we
live in right now. We still have quite a few devices that need to be
wired up by code. If you try to device_add such a device, it'll fail
in sometimes mysterious ways. If you're lucky, you get an
unmysterious immediate crash.
To protect users from such badness, DeviceClass member no_user used to
make device models unavailable with -device / device_add, but that
regressed in commit 18b6dad. The device model is still omitted from
help, but is available anyway.
Attempts to fix the regression have been rejected with the argument
that the purpose of no_user isn't clear, and it's prone to misuse.
This commit clarifies no_user's purpose. Anthony suggested to rename
it cannot_instantiate_with_device_add_yet_due_to_internal_bugs, which
I shorten somewhat to keep checkpatch happy. While there, make it
bool.
Every use of cannot_instantiate_with_device_add_yet gets a FIXME
comment asking for rationale. The next few commits will clean them
all up, either by providing a rationale, or by getting rid of the use.
With that done, the regression fix is hopefully acceptable.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Fix NOR flash manufacturer and device ID reading. This now
properly takes into account device widths and device max widths
as required. The reading of these IDs uses the same max_width
dependent addressing as CFI queries.
The old code remains for chips that don't specify a device width,
as the new code relies on a device width being set in order to
properly operate. The existing code seems very broken.
Only ident0 and ident1 are used in the new code, as other fields
relate to the lock state of blocks in flash.
The VExpress flash configuration has been updated to match
the new code, as the existing definition was 'wrong' in order
to return the expected results with the broken device ID code.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-8-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change fixes the CFI query responses to handle NOR device
widths that are different from the bank width. Support is also
added for multi-width devices in a x8 configuration. This is
typically x8/x16 devices, but the CFI specification mentions
x8/x32 devices so those should be supported as well if they
exist.
The query response data is now replicated per-device in the bank,
and is adjusted for x16 or x32 parts configured in x8 mode.
The existing code is left in place for boards that have not
been updated to specify an explicit device_width. The VExpress
board has been updated in an earlier patch in this series so
this is the only board currently affected.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-7-git-send-email-roy.franz@linaro.org
[PMM: fixed a few formatting nits]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For handling CFI and device ID reads, we need to not only know the
width that a NOR flash device is configured for, but also its maximum
width. The maximum width addressing mode is used for multi-width
parts no matter which width they are configured for. The most common
case is x16 parts that also support x8 mode. When configured for x8
operation these devices respond to CFI and device ID requests differently
than native x8 NOR parts.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-6-git-send-email-roy.franz@linaro.org
[PMM: Added comment explaining the semantics of width vs device-width
vs max-device-width]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we know how wide each flash device that makes up the bank is,
return status for each device in the bank. Leave existing code
that treats 32 bit wide banks as composed of two 16 bit devices as otherwise
we may break configurations that do not set the device_width propery.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-4-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The width of the devices that make up the flash interface
is required to mask certain commands, in particular the
write length for buffered writes. This length will be presented
to each device on the interface by the program writing the flash,
and the flash emulation code needs to be able to determine
the length of the write as recieved by each flash device.
The device-width defaults to the bank width which should
maintain existing behavior for platforms that don't need
this change.
This change is required to support buffered writes on the
vexpress platform that has a 32 bit flash interface with 2
16 bit devices on it.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Message-id: 1386279359-32286-3-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the 'width' member of the pflash_t structure
in preparation for adding a bank_width member.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386279359-32286-2-git-send-email-roy.franz@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename variable qdev -> dev since that's what realize's argument is called
by convention.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an Error so that it can be propagated later.
Tested-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[AF: Rebased]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This ensures hot-unplug is handled properly by the proxy, and avoids
leaking bus_name which is freed by virtio_device_exit.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the legacy cpu_to_be32wu() with stl_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-8-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Replace the legacy cpu_to_be16wu() with stw_be_p().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1383669517-25598-7-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Adopt error_report() while at it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSXNO8AAoJECgfDbjSjVRp7VAH/0B73mCOiyVACGx7fazK3SGK
X8TxZWVtG5A77ISqKyrtjLAhK9DCQjEzQTbMNhXHM3Ar6crwo7nJZnQvH2Gh1X2p
34BOQSVc4rtXz5pwDIr48dBLrxeslwXub79chUs+IK1/4RSn3h3nuS3k6JVkmLJN
rcHMj4ljJmi4Hd9vOpmS1jo/a61usi36hhU7CMgcrsXzStZycBBzCozOB3VW8p1X
/iwyf91YjmNPkn9gA3/aViGjszu8jE91dkA0C+ljwvcGbs2yEl3LCWEJfsMvoh5P
2M+k0XXbHwq/P9PFMa/2/lWOo4EO4Oxa+G/6QvovJrteYnktr+E9DqjU8pCT7yI=
=CVfs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci, pc, acpi fixes, enhancements
This includes some pretty big changes:
- pci master abort support by Marcel
- pci IRQ API rework by Marcel
- acpi generation support by myself
Everything has gone through several revisions, latest versions have been on
list for a while without any more comments, tested by several
people.
Please pull for 1.7.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2013 07:33:48 AM CEST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony: (39 commits)
ssdt-proc: update generated file
ssdt: fix PBLK length
i386: ACPI table generation code from seabios
pc: use new api to add builtin tables
acpi: add interface to access user-installed tables
hpet: add API to find it
pvpanic: add API to access io port
ich9: APIs for pc guest info
piix: APIs for pc guest info
acpi/piix: add macros for acpi property names
i386: define pc guest info
loader: allow adding ROMs in done callbacks
i386: add bios linker/loader
loader: use file path size from fw_cfg.h
acpi: ssdt pcihp: updat generated file
acpi: pre-compiled ASL files
acpi: add rules to compile ASL source
i386: add ACPI table files from seabios
q35: expose mmcfg size as a property
q35: use macro for MCFG property name
...
Message-id: 1381818560-18367-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Report from valgrind:
==19521== Source and destination overlap in memcpy(0x31d38938, 0x31d38938, 64)
==19521== at 0x4A0A343: memcpy@@GLIBC_2.14 (in
/usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==19521== by 0x42774E: virtio_blk_device_init (virtio-blk.c:686)
==19521== by 0x46EE9E: virtio_device_init (virtio.c:1158)
==19521== by 0x25405E: device_realize (qdev.c:178)
==19521== by 0x2559B5: device_set_realized (qdev.c:699)
==19521== by 0x3A819B: property_set_bool (object.c:1315)
==19521== by 0x3A6CE0: object_property_set (object.c:803)
Valgrind is right: blk == &s->blks, so it is a memcpy of 64 byte with
source == destination which can be removed.
Reported-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.
An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.
Removed irq related fields from state if not used anymore.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.
Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit 4472beae modified the semantics of ioreq_{un,}map so that they are
idempotent if called when they're not needed (ie., twice in a row). However,
it neglected to handle the case where batch mapping is not being used (the
default), and one of the grants fails to map. In this case, ioreq_unmap will
be called to unwind and unmap any mappings already performed, but ioreq_unmap
simply returns due to the aforementioned change (the ioreq has not already
been marked as mapped).
The frontend user can therefore force xen_disk to leak grant mappings, a
per-domain limited resource.
Fix by marking the ioreq as mapped before calling ioreq_unmap in this
situation.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The following sequence happens:
- the SeaBIOS virtio-blk driver does not support the WCE feature, which
causes QEMU to disable writeback caching
- the Linux virtio-blk driver resets the device, finds WCE is available
but writeback caching is disabled; tells block layer to not send cache
flush commands
- the Linux virtio-blk driver sets the DRIVER_OK bit, which causes
writeback caching to be re-enabled, but the Linux virtio-blk driver does
not know of this side effect and cache flushes remain disabled
The bug is at the third step. If the guest does know about CONFIG_WCE,
QEMU should ignore the WCE feature's state. The guest will control the
cache mode solely using configuration space. This change makes Linux
do flushes correctly, but Linux will keep SeaBIOS's writethrough mode.
Hence, whenever the guest is reset, the cache mode of the disk should
be reset to whatever was specified in the "-drive" option. With this
change, the Linux virtio-blk driver finds that writeback caching is
enabled, and tells the block layer to send cache flush commands
appropriately.
Reported-by: Rusty Russell <rusty@au1.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Avoid trying to setup dataplane again if dataplane setup is already in
progress. This may happen if an eventfd is triggered during setup.
I saw this occasionally with an experimental s390 irqfd implementation:
virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> virtio_ccw_set_host_notifier
...
-> virtio_queue_set_host_notifier_fd_handler
-> virtio_queue_host_notifier_read
-> virtio_queue_notify_vq
-> virtio_blk_handle_output
-> virtio_blk_data_plane_start
-> vring_setup
-> hostmem_init
-> memory_listener_register
-> BOOM
As virtio-ccw tries to follow what virtio-pci does, it might be triggerable
for other platforms as well.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We call bdrv_attach_dev when initializing whether or not bs is created
locally, so call bdrv_detach_dev and let the refcnt handle the
lifecycle.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.
This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If PFLASH_DEBUG is enabled then we have some build errors:
hw/block/pflash_cfi02.c: In function ‘pflash_timer’:
hw/block/pflash_cfi02.c:128:5: error: expected ‘)’ before string constant
hw/block/pflash_cfi02.c:128:5: error: too few arguments to function ‘fprintf’
This patch fixes the problem.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The .io_flush() handler no longer exists and has no users. Drop the
io_flush argument to aio_set_fd_handler() and related functions.
The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Check exit conditions before entering blocking aio_poll(). This is
mainly for consistency since it's unlikely that we are stopping in the
first event loop iteration.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com
Rebased.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With the new semantics of pc_sysfw (no -pflash implies "old-style" ROM setup,
-pflash implies "new-style" ROM setup), there is no need anymore for a compat
property. Old machines simply will never use -pflash, and thus will always
use old-style setup.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1376069702-22330-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The variable is not written anymore.
This cleans up after 9e1c2ec (which accidentally left variable
pc_sysfw_flash_vs_rom_bug_compatible behind, value always zero), and
buries dead code from commit dafb82e (which resurrected the pc_sysfw
code for pc_sysfw_flash_vs_rom_bug_compatible by mistake).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1376069702-22330-2-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce a type constant, use QOM casts and rename the parent field and
prepare for QOM realize.
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Since commit dd3be74207 SUNW,fdtwo's
initfn (realizefn since 940194c236)
was using SYSBUS_FDC() cast. This uses type sysbus-fdc rather than
SUNW,fdtwo.
Fix this by letting SUNW,fdtwo and sysbus-fdc both inherit from an
abstract type base-sysbus-fdc.
This allows to consolidate realizefns by using instance_init functions.
Clean up variable names and variable order while at it.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Hu Tao <hutao@cn.fujitsu.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: refuse to start if device is already in use
dataplane: enable virtio-blk x-data-plane=on live migration
migration: fix spice migration
migration: notify migration state before starting thread
block: Repair the throttling code.
gluster: Add image resize support
Message-id: 1375112172-24863-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Dataplane must check whether a block device is in use before launching
the dataplane thread. This is necessary since the thread does not
synchronize with the main loop and I/O requests could cause corruption.
One example is when a drive is added and a block job is started before
hotplugging the virtio-blk-pci adapter. In this case we must not use
dataplane mode.
Cc: qemu-stable@nongnu.org
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Although the dataplane thread does not cooperate with dirty memory
logging yet it's fairly easy to temporarily disable dataplane during
live migration. This way virtio-blk can live migrate when
x-data-plane=on.
The dataplane thread will restart after migration is cancelled or if the
guest resuming virtio-blk operation after migration completes.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Support backend option "direct-io-safe". This is documented as
follows in the Xen backend specification:
* direct-io-safe
* Values: 0/1 (boolean)
* Default Value: 0
*
* The underlying storage is not affected by the direct IO memory
* lifetime bug. See:
* http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
*
* Therefore this option gives the backend permission to use
* O_DIRECT, notwithstanding that bug.
*
* That is, if this option is enabled, use of O_DIRECT is safe,
* in circumstances where we would normally have avoided it as a
* workaround for that bug. This option is not relevant for all
* backends, and even not necessarily supported for those for
* which it is relevant. A backend which knows that it is not
* affected by the bug can ignore this option.
*
* This option doesn't require a backend to use O_DIRECT, so it
* should not be used to try to control the caching behaviour.
Also, BDRV_O_NATIVE_AIO is ignored if BDRV_O_NOCACHE, so clarify the
default flags passed to the qemu block layer.
The original proposal for a "cache" backend option has been dropped
because it was believed too wide, especially considering that at the
moment the backend doesn't have a way to tell the toolstack that it is
capable of supporting it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The firmware commonly used with MIPS Malta boards (YAMON) reads the
status of the pflash with a 32bit memory access. On real hardware
this results in the status byte being mirrored in the upper 16 bits
of the read value. For example if the status byte is represented by
SS then the hardware reads 0x00SS00SS. The YAMON firmware compares the
status against 32bit values expecting the mirrored value and fails
without it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Rename fdctrl_init_common() to fdctrl_realize_common() and let
fdctrl_connect_drives() propagate an Error through it.
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce type constant and replace FROM_SYSBUS().
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce type constant and replace FROM_SYSBUS().
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce type constant and avoid DO_UPCAST(), container_of(),
and use DEVICE() to avoid accessing parent qdev directly.
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
[AF: Renamed parent field and avoided repeated SYS_BUS_DEVICE() casts]
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Michael Tokarev (2) and others
# Via Michael Tokarev
* mjt/trivial-patches:
doc: monitor multiplexing rewording
block/m25p80: Update Micron entries
Fix command example in qemu.sasl
slirp: remove mbuf(m_hdr,m_dat) indirection
linux-user: declare sys_futex to have 6 arguments
Message-id: 1374225073-12959-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- Split 32Mb and 256Mb parts into a11 and a13 variants.
- Add the 4K sector flag to the 128Mb parts. (These entries were taken from
the Linux kernel list, which is missing the flag.)
- Fill out the table of sizes with entries for 64Mb parts.
Prodded by Peter Crosthwaite.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Load the virtio.c state into vring.c when we start dataplane mode and
vice versa when stopping dataplane mode. This patch makes it possible
to start and stop dataplane any time while the guest is running.
This will eventually allow us to go back to QEMU main loop for
bdrv_drain_all() and live migration. In the meantime, this patch makes
the dataplane lifecycle more robust but should make no visible
difference. It may be useful in the virtio-net dataplane effort.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Nand chips are not sysbus devices - they do not have any sense of MMIO,
nor interrupts. Re-parent to TYPE_DEVICE accordingly.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The prescribed transition from Sysbus::init function to a
Device::realize.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define and use standard QOM cast macro. Remove usages of DO_UPCAST and
direct -> style casting.
Cc: afaerber@suse.de
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make this code closer to passing checkpatch. Mostly missing braces, but
a few rogue tabs in there as well.
Cc: qemu-trivial@nongnu.org
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The DMAContext is a simple pointer to an AddressSpace that is now always
already available. Make everyone hold the address space directly,
and clean up the DMA API to use the AddressSpace directly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Drop ISADeviceClass::init and the resulting no-op initfn and let
children implement their own realizefn. Adapt error handling.
Split off an instance_init where sensible.
Signed-off-by: Andreas Färber <afaerber@suse.de>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When pc-sysfw.rom_only == 0, flash memory will be
usable with kvm. In order to enable flash memory mode,
a pflash device must be created. (For example, by
using the -pflash command line parameter.)
Usage of a flash memory device with kvm requires
KVM_CAP_READONLY_MEM, and kvm will abort if
a flash device is used with an older kvm which does
not support this capability.
If a flash device is not used, then qemu/kvm will
operate in the original rom-mode.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-5-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The isapc machine with seabios currently requires the BIOS region
to be read/write memory rather than read-only memory.
KVM currently cannot support the BIOS as a ROM region, but qemu
in non-KVM mode can. Based on this, isapc machine currently only
works with KVM.
To work-around this isapc issue, this change avoids marking the
BIOS as readonly for isapc.
This change also will allow KVM to start supporting ROM mode
via KVM_CAP_READONLY_MEM.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-2-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.
So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 9953f8822c.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new devices for various manufacturers, and re-sort Spansion list to
match the order in Linux, which requires chips with a non-zero extended ID
to come first.
With this commit the outstanding differences to Linux rev 55bf75b are:
- Erase size flag differences in s25sl032p, s25sl064p, s25fl016k, s25fl064k
(These devices have only some blocks that support small erase sizes.)
- Linux lacks n25q128
- Devices without a Jedec ID have been excluded
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Introduce type constant and cast macro to obsolete DO_UPCAST().
Reuse type constant for PC machine compatibility settings.
Prepares for ISA realizefn.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1367093935-29091-4-git-send-email-afaerber@suse.de
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use of a flash memory device for the BIOS was added in series "[PATCH
v10 0/8] PC system flash support", commit 4732dca..1b89faf, v1.1.
Flash vs. ROM is a guest-visible difference. Thus, flash use had to
be suppressed for machine types pc-1.0 and older. This was
accomplished by adding a dummy device "pc-sysfw" with property
"rom_only":
* Non-zero rom_only means "use ROM". Default for pc-1.0 and older.
* Zero rom_only means "maybe use flash". Default for newer machines.
Not only is the dummy device ugly, it was also retroactively added to
the older machine types! Fortunately, it's not guest-visible (thus no
immediate guest ABI breakage), and has no vmstate (thus no immediate
migration breakage). Breakage occurs only if the user unwisely
enables flash by setting rom_only to zero. Patch review FAIL #1.
Why "maybe use flash"? Flash didn't (and still doesn't) work with
KVM. Therefore, rom_only=0 really means "use flash, except when KVM
is enabled, use ROM". This is a Bad Idea, because it makes enabling/
disabling KVM guest-visible. Patch review FAIL #2.
Aside: it also precludes migrating between KVM on and off, but that's
not possible for other reasons anyway.
Fix as follows:
1. Change the meaning of rom_only=0 to mean "use flash, no ifs, buts,
or maybes" for pc-i440fx-1.5 and pc-q35-1.5. Don't change anything
for older machines (to remain bug-compatible).
2. Change the default value from 0 to 1 for these machines.
Necessary, because 0 doesn't work with KVM. Once it does, we can flip
the default back to 0.
3. Don't revert the retroactive addition of device "pc-sysfw" to older
machine types. Seems not worth the trouble.
4. Add a TODO comment asking for device "pc-sysfw" to be dropped once
flash works with KVM.
Net effect is that you get a BIOS ROM again even when KVM is disabled,
just like for machines predating the introduction of flash.
To get flash instead, use "--global pc-sysfw.rom_only=0".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365780303-26398-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This clean the init and the exit functions and rename virtio_common_cleanup
to virtio_cleanup.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove virtio-bindings, and use class instead.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
I think in the early revisions of this we had an instantiation helper
for the device in devices.h. This was later removed and this header was
left over. Removed
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If there is no backing bdrv, let the debugging developer know about it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The debug printfs on every page program/read is extremely verbose. Add
a second level of debug for this.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Some of the debug printfs in m25p80 are really guest errors.
Changed over to qemu_log_mask(LOG_GUEST_ERROR accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Some dodgy casts were making a mess of these msgs.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Minor fixes to documentation and code comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
