'pentium' cpu is old and obsolete and should be avoided for running tests if
its not strictly needed. Use 'max' cpu instead for generic non-cpu specific
numa test.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-ID: <20240610155303.7933-2-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add numa test case for loongarch system, it passes to run
with command "make check-qtest".
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Thomas Huth <thuth@redhat.com>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240528082155.938586-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
ARM/aarch64 are easy to fix because they already have to pass a machine
type by hand. Just guard the tests with a check that the machine actually
exists.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240509170044.190795-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit x86 systems do not have a reserved memory for hole64. On those 32-bit
systems without PSE36 or PAE CPU features, hotplugging memory devices are not
supported by QEMU as QEMU always places hotplugged memory above 4 GiB boundary
which is beyond the physical address space of the processor. Linux guests also
does not support memory hotplug on those systems. Please see Linux
kernel commit b59d02ed08690 ("mm/memory_hotplug: disable the functionality
for 32b") for more details.
Therefore, the maximum limit of the guest physical address in the absence of
additional memory devices effectively coincides with the end of
"above 4G memory space" region for 32-bit x86 without PAE/PSE36. When users
configure additional memory devices, after properly accounting for the
additional device memory region to find the maximum value of the guest
physical address, the address will be outside the range of the processor's
physical address space.
This change adds improvements to take above into consideration.
For example, previously this was allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
With this change now it is no longer allowed:
$ ./qemu-system-x86_64 -cpu pentium -m size=10G
qemu-system-x86_64: Address space limit 0xffffffff < 0x2bfffffff phys-bits too low (32)
However, the following are allowed since on both cases physical address
space of the processor is 36 bits:
$ ./qemu-system-x86_64 -cpu pentium2 -m size=10G
$ ./qemu-system-x86_64 -cpu pentium,pse36=on -m size=10G
For 32-bit, without PAE/PSE36, hotplugging additional memory is no longer allowed.
$ ./qemu-system-i386 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
$ ./qemu-system-i386 -machine q35 -m size=1G,maxmem=3G,slots=2
qemu-system-i386: Address space limit 0xffffffff < 0x1ffffffff phys-bits too low (32)
A new compatibility flag is introduced to make sure pc_max_used_gpa() keeps
returning the old value for machines 8.1 and older.
Therefore, the above is still allowed for older machine types in order to support
compatibility. Hence, the following still works:
$ ./qemu-system-i386 -machine pc-i440fx-8.1 -m size=1G,maxmem=3G,slots=2
$ ./qemu-system-i386 -machine pc-q35-8.1 -m size=1G,maxmem=3G,slots=2
Further, following is also allowed as with PSE36, the processor has 36-bit
address space:
$ ./qemu-system-i386 -cpu 486,pse36=on -m size=1G,maxmem=3G,slots=2
After calling CPUID with EAX=0x80000001, all AMD64 compliant processors
have the longmode-capable-bit turned on in the extended feature flags (bit 29)
in EDX. The absence of CPUID longmode can be used to differentiate between
32-bit and 64-bit processors and is the recommended approach. QEMU takes this
approach elsewhere (for example, please see x86_cpu_realizefn()), With
this change, pc_max_used_gpa() also uses the same method to detect 32-bit
processors.
Unit tests are modified to not run 32-bit x86 tests that use memory hotplug.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230922160413.165702-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In aarch64_numa_cpu(), the CPU and NUMA association is something
like below. Two threads in the same core/cluster/socket are
associated with two individual NUMA nodes, which is unreal as
Igor Mammedov mentioned. We don't expect the association to break
NUMA-to-socket boundary, which matches with the real world.
NUMA-node socket cluster core thread
------------------------------------------
0 0 0 0 0
1 0 0 0 1
This corrects the topology for CPUs and their association with
NUMA nodes. After this patch is applied, the CPU and NUMA
association becomes something like below, which looks real.
Besides, socket/cluster/core/thread IDs are all checked when
the NUMA node IDs are verified. It helps to check if the CPU
topology is properly populated or not.
NUMA-node socket cluster core thread
------------------------------------------
0 1 0 0 0
1 0 0 0 0
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20220503140304.855514-5-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The CPU topology isn't enabled on arm/virt machine yet, but we're
going to do it in next patch. After the CPU topology is enabled by
next patch, "thread-id=1" becomes invalid because the CPU core is
preferred on arm/virt machine. It means these two CPUs have 0/1
as their core IDs, but their thread IDs are all 0. It will trigger
test failure as the following message indicates:
[14/21 qemu:qtest+qtest-aarch64 / qtest-aarch64/numa-test ERROR
1.48s killed by signal 6 SIGABRT
>>> G_TEST_DBUS_DAEMON=/home/gavin/sandbox/qemu.main/tests/dbus-vmstate-daemon.sh \
QTEST_QEMU_STORAGE_DAEMON_BINARY=./storage-daemon/qemu-storage-daemon \
QTEST_QEMU_BINARY=./qemu-system-aarch64 \
QTEST_QEMU_IMG=./qemu-img MALLOC_PERTURB_=83 \
/home/gavin/sandbox/qemu.main/build/tests/qtest/numa-test --tap -k
――――――――――――――――――――――――――――――――――――――――――――――
stderr:
qemu-system-aarch64: -numa cpu,node-id=0,thread-id=1: no match found
This fixes the issue by providing comprehensive SMP configurations
in aarch64_numa_cpu(). The SMP configurations aren't used before
the CPU topology is enabled in next patch.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-id: 20220503140304.855514-3-gshan@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit a2ce7dbd91 ("meson: convert tests/qtest to meson"),
libqtest.h is under libqos/ directory, while libqtest.c is still in
qtest/. Move back to its original location to avoid mixing with libqos/.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in the testcases
that have strong dependency on the parsing results.
Currently, test_def_cpu_split use "-smp 8" and will get 8 CPU sockets
based on current parsing rule. But if we change to prefer cores over
sockets we will get one CPU socket with 8 cores, and this testcase
will not get expected numa set by default on x86_64 (Ok on aarch64).
So now explicitly use "-smp 8,sockets=8" to avoid affect from parsing
logic change.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-9-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 80d7835749 (qemu-options: rewrite help for -smp options),
the preference of sockets/cores in -smp parsing is considered liable
to change, and actually we are going to change it in a coming commit.
So it'll be more stable to use detailed -smp CLIs in testing if we
have strong dependency on the parsing results.
pc_dynamic_cpu_cfg currently assumes/needs that there will be 2 CPU
sockets with "-smp 2". To avoid breaking the test because of parsing
logic change, now explicitly use "-smp 2,sockets=2".
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210929025816.21076-8-wangyanan55@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make -smp syntactic sugar for a compound property "-machine
smp.{cores,threads,cpu,...}". machine_smp_parse is replaced by the
setter for the property.
numa-test will now cover the new syntax, while other tests
still use -smp.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The newer 'query-cpus-fast' command avoids side effects on the guest
execution. Note that some of the field names are different in the
'query-cpus-fast' command.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cannibalize one backend in the HMAT test to make sure that
prealloc=y is tested.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200325094423.24293-3-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Considering that legacy "mem" option is deprecated, use memdev
in tests and add an additional test for legacy "mem" option
on old machine type, to make sure it won't regress in the future.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-80-imammedo@redhat.com>
Use GString to pass argument to make_cli() so that it would be easy
to dynamically change test case arguments from main(). The follow up
patch will use it to change RAM size options depending on target.
While at it cleanup 'cli' freeing, using g_autofree annotation.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200219160953.13771-79-imammedo@redhat.com>
The tests directory itself is pretty overcrowded, and it's hard to
see which test belongs to which test subsystem (unit, qtest, ...).
Let's move the qtests to a separate folder for more clarity.
Message-Id: <20191218103059.11729-6-thuth@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
