When run with a PPC Book3S (server) CPU Currently 'info tlb' in the
qemu monitor reports "dump_mmu: unimplemented". However, during
bringup work, it can be quite handy to have the SLB entries, which are
available in the CPUPPCState. This patch adds an implementation of
info tlb for book3s, which dumps the SLB.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
when I tried qemu with -virtio-console pty the guest hangs and attaching
on /dev/pts/<x> does not return anything if the attachment is too late.
This results in pty_chr_write() returning 0, which causes the port to
get throttled. This results in the guest getting frozen as the
guest->host virtio_console writes don't return until the host releases
the vq element back to the guest.
For the virtio-serial use case we don't want to lose data but for the
console case we better drop data instead of "killing" the guest
console. If we get chardev->frontend notification and a better behaving
virtio-console we can revert this fix.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Make's multiple output syntax
x.c x.h: x.template
gen < x.template
actually invokes the command once for x.c and once for x.h (with differing $@
in each invocation). During a parallel build, the two commands may be invoked
in parallel; this opens up a race, where the second invocation trashes a file
supposedly produced during the first, and now in use by a dependent command.
The various qapi code generators are susceptible to this; fix by making them
generate just one file per invocation.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* aneesh/for-upstream:
scripts/analyse-9p-simpletrace.py: Add symbolic names for 9p operations.
hw/9pfs: iattr_valid flags are kernel internal flags map them to 9p values.
hw/9pfs: Use the correct signed type for different variables
hw/9pfs: replace iovec manipulation with QEMUIOVector
* bonzini/nbd-for-anthony: (26 commits)
nbd: add myself as maintainer
qemu-nbd: throttle requests
qemu-nbd: asynchronous operation
qemu-nbd: add client pointer to NBDRequest
qemu-nbd: move client handling to nbd.c
qemu-nbd: use common main loop
link the main loop and its dependencies into the tools
qemu-nbd: introduce NBDRequest
qemu-nbd: introduce NBDExport
qemu-nbd: introduce nbd_do_receive_request
qemu-nbd: more robust handling of invalid requests
qemu-nbd: introduce nbd_do_send_reply
qemu-nbd: simplify nbd_trip
move corking functions to osdep.c
qemu-nbd: remove data_size argument to nbd_trip
qemu-nbd: remove offset argument to nbd_trip
Update ioctl order in nbd_init() to detect EBUSY
nbd: add support for NBD_CMD_TRIM
nbd: add support for NBD_CMD_FLUSH
nbd: add support for NBD_CMD_FLAG_FUA
...
qemu-kvm passes numa/SRAT topology information for smp_cpus to SeaBIOS. However
SeaBIOS always expects to setup max_cpus number of SRAT cpu entries
(MaxCountCPUs variable in build_srat function of Seabios). When qemu-kvm runs
with smp_cpus != max_cpus (e.g. -smp 2,maxcpus=4), Seabios will mistakenly use
memory SRAT info for setting up CPU SRAT entries for the offline CPUs. Wrong
SRAT memory entries are also created. This breaks NUMA in a guest.
Fix by setting up SRAT info for max_cpus in qemu-kvm.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The latter was already commented out, the former is redundant as well.
We always get the latest changes after return from the guest via
kvm_arch_post_run.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Keep a per-VCPU xsave buffer for kvm_put/get_xsave instead of
continuously allocating and freeing it on state sync.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Field 0 (FCW+FSW) and 1 (FTW+FOP) were hard-coded so far.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Limiting the number of in-flight requests is implemented very simply
with a can_read callback. It does not require a semaphore, unlike the
client side in block/nbd.c, because we can throttle directly the creation
of coroutines. The client side can have a coroutine created at any time
when an I/O request is made.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using coroutines enable asynchronous operation on both the network and
the block side. Network can be owned by two coroutines at the same time,
one writing and one reading. On the send side, mutual exclusion is
guaranteed by a CoMutex. On the receive side, mutual exclusion is
guaranteed because new coroutines immediately start receiving data,
and no new coroutines are created as long as the previous one is receiving.
Between receive and send, qemu-nbd can have an arbitrary number of
in-flight block transfers. Throttling is implemented by the next
patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By attaching a client to an NBDRequest, we can avoid passing around the
socket descriptor and data buffer.
Also, we can now manage the reference count for the client in
nbd_request_get/put request instead of having to do it ourselved in
nbd_read. This simplifies things when coroutines are used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch sets up the fd handler in nbd.c instead of qemu-nbd.c. It
introduces NBDClient, which wraps the arguments to nbd_trip in a single
structure, so that we can add a notifier to it. This way, qemu-nbd can
know about disconnections.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using a single main loop for sockets will help yielding from the socket
coroutine back to the main loop, and later reentering it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using the main loop code from QEMU enables tools to operate fully
asynchronously. Advantages include better Windows portability (for some
definition of portability) over glib's.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the buffer from NBDExport to a new structure, so that it will be
possible to have multiple in-flight requests for the same export
(and for the same client too---we get that for free).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Group the sending of a reply and the associated data into a new function.
Without corking, the caller would be forced to leave 12 free bytes at the
beginning of the data pointer. Not too ugly, but still ugly. :)
Using nbd_do_send_reply everywhere will help when the routine will set up
the write handler that re-enters the send coroutine.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use TCP_CORK to remove a violation of encapsulation, that would later
require nbd_trip to know too much about an NBD reply.
We could also switch to sendmsg (qemu_co_sendv) later, it is even
easier once coroutines are in.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update ioctl(s) in nbd_init() to detect device busy early.
Current nbd_init() issues NBD_CLEAR_SOCKET before NBD_SET_SOCKET, if issuing
"qemu-nbd -c /dev/nbd0 disk.img" twice, the second time won't detect EBUSY in
nbd_init(), but in nbd_client will report EBUSY and do clear socket (the 1st
time command will be affacted too because of no socket any more.)
No change to previous version.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow sending up to 16 requests, and drive the replies to the coroutine
that did the request. The code is written to be exactly the same as
before this patch when MAX_NBD_REQUESTS == 1 (modulo the extra mutex
and state).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-nbd has a limit of slightly less than 1M per request. Work
around this in the nbd block driver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Outside coroutines, avoid busy waiting on EAGAIN by temporarily
making the socket blocking.
The API of qemu_recvv/qemu_sendv is slightly different from
do_readv/do_writev because they do not handle coroutines. It
returns the number of bytes written before encountering an
EAGAIN. The specificity of yielding on EAGAIN is entirely in
qemu-coroutine.c.
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to check if ports can accept any incoming data from the
guest each time the guest sends data. Check if the port implements such
functionality during port initialisation.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The earlier code really was a hack: initialising class methods in an
object init function as noted by Anthony.
The motivation for that was to not have the virtio-serial-bus call into
the callback functions if there was no chardev backend registered.
However, that really wasn't a worthwhile optimisation, and definitely
not one that was well-implemented. Get rid of it.
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For the callback functions invoked by the virtio-serial-bus code, check
if we have chardev backends registered before we call into the chardev
functions.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, we just print the numerical value of 9p operation identifier in
case of RERROR which is less meaningful for readability. Mapping 9p
operation ids to symbolic names provides a better tracelog:
RERROR (tag = 1 , id = TWALK , err = " No such file or directory ")
RERROR (tag = 1 , id = TUNLINKAT , err = " Directory not empty ")
This patch provides a dictionary of all possible 9p operation symbols mapped
to their numerical identifiers which are likely to be used in future at
various places in this script.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Kernel internal values can change, add protocol values for these constant and
use them.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The v9fs_read() and v9fs_write() functions rely on iovec[] manipulation
code should be replaced with QEMUIOVector to avoid duplicating code.
In the future it may be possible to make the code even more concise by
using QEMUIOVector consistently across virtio and 9pfs.
The "v" format specifier for pdu_marshal() and pdu_unmarshal() is
dropped since it does not actually pack/unpack anything. The specifier
was also not implemented to update the offset variable and could only be
used at the end of a format string, another sign that this shouldn't
really be a format specifier. Instead, see the new
v9fs_init_qiov_from_pdu() function.
This change avoids a possible iovec[] buffer overflow when indirect
vrings are used since the number of vectors is now limited by the
underlying VirtQueueElement and cannot be out-of-bounds.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Response format r6 includes a subset of the status bits;
clear the clear-on-read bits which are read by an r6 response.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix some bugs in our implementation of the APP_CMD status bit:
* the response to an ACMD should have APP_CMD set, not cleared
* if an illegal ACMD is sent then the next command should be
handled as a normal command
This requires that we split "card is expecting an ACMD" from
the state of the APP_CMD status bit (the latter indicates
both "expecting ACMD" and "that was an ACMD").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Correct how we handle the type B ("cleared on valid command")
status bits. In particular, the CURRENT_STATE bits in a response
should be the state of the card when it received that command,
not the state when it received the preceding command. (This is
one of the issues noted in LP:597641.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
App commands in an invalid state should set ILLEGAL_COMMAND, not
merely return a zero response.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Handle returning CRC and locked-card errors in the same code path
we use for other responses. This makes no difference in behaviour
but means that these error responses will be printed by the debug
logging code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add an extra sd_illegal value to the sd_rsp_type_t enum so that
sd_app_command() and sd_normal_command() can tell sd_do_command()
that the command was illegal. This is needed so we can do things
like reset certain status bits only on receipt of a valid command.
For the moment, just use it to pull out the setting of the
ILLEGAL_COMMAND status bit into sd_do_command().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
