This moves BlockJob.status and the closely related functions
(block_)job_state_transition() and (block_)job_apply_verb to Job. The
two QAPI enums are renamed to JobStatus and JobVerb.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QAPI types aren't externally visible, so we can rename them without
causing problems. Before we add a job type to Job, rename the enum
so it can be used for more than just block jobs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Clarify that len is just an estimation of the end value of offset, and
that offset increases monotonically while len can change arbitrarily.
While touching the documentation of offset, move it directly after len
to match the order of the declaration below.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 0ec4dfb8d changed block-job_pause/resume so that they return an
error if they don't do anything because the job is already
paused/running. It forgot to update the documentation, so do that now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
"vlan" will be dropped in 2.13, not in 2.12. And while we're at it,
use the better wording "dropped in" instead of "removed with" (also
for the "dump" removal).
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Blank lines and comments as suggested by Eric.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427111502.9822-1-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It pauses an ongoing migration. Currently it only supports postcopy.
Note that this command will work on either side of the migration.
Basically when we trigger this on one side, it'll interrupt the other
side as well since the other side will get notified on the disconnect
event.
However, it's still possible that the other side is not notified, for
example, when the network is totally broken, or due to some firewall
configuration changes. In that case, we will also need to run the same
command on the other side so both sides will go into the paused state.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-24-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
The first allow-oob=true command. It's used on destination side when
the postcopy migration is paused and ready for a recovery. After
execution, a new migration channel will be established for postcopy to
continue.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-21-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Introducing new migration state "postcopy-recover". If a migration
procedure is paused and the connection is rebuilt afterward
successfully, we'll switch the source VM state from "postcopy-paused" to
the new state "postcopy-recover", then we'll do the resume logic in the
migration thread (along with the return path thread).
This patch only do the state switch on source side. Another following up
patch will handle the state switching on destination side using the same
status bit.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-10-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.11/2.13/
It will be used when we want to resume one paused migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-8-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
s/2.12/2.13/
Introducing a new state "postcopy-paused", which can be used when the
postcopy migration is paused. It is targeted for postcopy network
failure recovery.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-3-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This adds a simple copy-on-read filter driver. It relies on the already
existing COR functionality in the central block layer code, which may be
moved here once we no longer need it there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180421132929.21610-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When we've reached the concluded state, we need to expose the error
state if applicable. Add the new field.
This should be sufficient for determining if a job completed
successfully or not after concluding; if we want to discriminate
based on how it failed more mechanically, we can always add an
explicit return code enumeration later.
I didn't bother to make it only show up if we are in the concluded
state; I don't think it's necessary.
Cc: qemu-stable@nongnu.org
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's been marked as deprecated since QEMU v2.9.0, so that should have
been enough time for everybody to either just drop unnecessary "vlan=0"
parameters, to switch to the modern -device + -netdev syntax for connecting
guest NICs with host network backends, or to switch to the "hubport" netdev
in case hubs are really wanted instead.
Buglink: https://bugs.launchpad.net/qemu/+bug/658904
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
mincore(2) checks whether pages are resident. Use it to verify that
page cache has been dropped.
You can trigger a verification failure by mmapping the image file from
another process that loads a byte from a page, forcing it to become
resident. bdrv_co_invalidate_cache() will fail while that process is
alive.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20180427162312.18583-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The TARGET_BASE_ARCH values from "configure" don't all map to the
@CpuInfoArch enum constants; in particular "s390x" from the former does
not match @s390 in the latter. Clients are known to rely on the @s390
constant specifically, so we can't change it silently. Instead, deprecate
the @CpuInfoFast.@arch member (in favor of @CpuInfoFast.@target) using the
regular deprecation process.
(No deprecation reminder is added to sysemu_target_to_cpuinfo_arch(): once
@CpuInfoFast.@arch is removed, the assignment expression that calls
sysemu_target_to_cpuinfo_arch() from qmp_query_cpus_fast() will have to
disappear; in turn the static function left without callers will also
break the build, thus it'll have to go.)
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180427192852.15013-6-lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a new field @target (of type @SysEmuTarget) to the output of the
@query-cpus-fast command, which provides more information about the
emulation target than the field @arch (of type @CpuInfoArch). Make @target
the new discriminator for the @CpuInfoFast return structure. Keep @arch
for compatibility.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-5-lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we have @SysEmuTarget, it makes sense to restrict
@TargetInfo.@arch to valid sysemu targets at the schema level.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180427192852.15013-4-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We'll soon need an enumeration type that lists all the softmmu targets
that QEMU (the project) supports. Introduce @SysEmuTarget to
"common.json".
The enum constant @x86_64 doesn't match the QAPI convention of preferring
hyphen ("-") over underscore ("_"). This is intentional; the @SysEmuTarget
constants are supposed to produce QEMU executable names when stringified
and appended to the "qemu-system-" prefix. Put differently, the
replacement text of the TARGET_NAME preprocessor macro must be possible to
look up in the list of (stringified) enum constants.
Like other enum types, @SysEmuTarget too can be used for discriminator
fields in unions. For the @i386 constant, a C-language union member called
"i386" would be generated. On mingw build hosts, "i386" is a macro
however. Add "i386" to "polluted_words" at once.
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20180427192852.15013-3-lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Commit ca230ff33f added the @arch field to @CpuInfoFast, but it failed
to set the new field in qmp_query_cpus_fast(), when TARGET_S390X was not
defined. The updated @query-cpus-fast example in "qapi-schema.json"
showed "arch":"x86" only because qmp_query_cpus_fast() calls g_malloc0()
to allocate @CpuInfoFast, and the CPU_INFO_ARCH_X86 enum constant is
generated with value 0.
All @arch values other than @s390 implied the @CpuInfoOther sub-struct
for @CpuInfoFast -- at the time of writing the patch --, thus no fields
other than @arch needed to be set when TARGET_S390X was not defined. Set
@arch now, by copying the corresponding assignments from
qmp_query_cpus().
* Commit 25fa194b7b added the @riscv enum constant to @CpuInfoArch (used
in both @CpuInfo and @CpuInfoFast -- the return types of the @query-cpus
and @query-cpus-fast commands, respectively), and assigned, in both
return structures, the @CpuInfoRISCV sub-structure to the new enum
value.
However, qmp_query_cpus_fast() would not populate either the @arch field
or the @CpuInfoRISCV sub-structure, when TARGET_RISCV was defined; only
qmp_query_cpus() would.
Assign @CpuInfoOther to the @riscv enum constant in @CpuInfoFast, and
populate only the @arch field in qmp_query_cpus_fast(). Getting CPU
state without interrupting KVM is an exceptional thing that only S390X
does currently. Quoting Cornelia Huck <cohuck@redhat.com>, "s390x is
exceptional in that it has state in QEMU that is actually interesting
for upper layers and can be retrieved without performance penalty". See
also
<https://www.redhat.com/archives/libvir-list/2018-February/msg00121.html>.
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Viktor VM Mihajlovski <mihajlov@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Fixes: ca230ff33f
Fixes: 25fa194b7b
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180427192852.15013-2-lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For convenience and clarity, make it possible to call qobject_ref() at
the time when the reference is associated with a variable, or
argument, by making qobject_ref() return the same pointer as given.
Use that to simplify the callers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Useless change to qobject_ref_impl() dropped, commit message improved
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
v2: Rebase on top of master
v3: Fix the json format (Eric Blake)
Fix a comparison issue (Gerd Hoffmann)
Signed-off-by: Elie Tournier <elie.tournier@collabora.com>
Message-id: 20180413135842.21325-2-tournier.elie@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-7-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <1521742647-25550-2-git-send-email-a.perevalov@samsung.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
What static=on really does is what we call metadata preallocation for
other block drivers. While we can still change the QMP interface, make
it more consistent by using 'preallocation' for VDI, too.
This doesn't implement any new functionality, so the only supported
preallocation modes are 'off' and 'metadata' for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It may need to treat PC-DIMM and NVDIMM differently, e.g., when
deciding the necessity of non-volatile flag bit in SRAT memory
affinity structures.
A new field 'nvdimm' is added to the union type MemoryDeviceInfo for
such purpose. Its type is currently PCDIMMDeviceInfo and will be
updated when necessary in the future.
It also fixes "info memory-devices"/query-memory-devices which
currently show nvdimm devices as dimm devices since
object_dynamic_cast(obj, TYPE_PC_DIMM) happily cast nvdimm to
TYPE_PC_DIMM which it's been inherited from.
Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Set (and clear) histograms through new command
block-latency-histogram-set and show new statistics in
query-blockstats results.
For now, the command is marked experimental with prefix 'x-',
to gain experience with the interface without being stuck
with design decisions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180309165212.97144-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: fix typos, mention x- prefix in commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
This command is only used to test OOB functionality. It should not be
used for any other purposes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-22-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
Having "allow-oob":true for a command does not mean that this command
will always be run in out-of-band mode. The out-of-band quick path will
only be executed if we specify the extra "run-oob" flag when sending the
QMP request:
{ "execute": "command-that-allows-oob",
"arguments": { ... },
"control": { "run-oob": true } }
The "control" key is introduced to store this extra flag. "control"
field is used to store arguments that are shared by all the commands,
rather than command specific arguments. Let "run-oob" be the first.
Note that in the patch I exported qmp_dispatch_check_obj() to be used to
check the request earlier, and at the same time allowed "id" field to be
there since actually we always allow that.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-19-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to(), spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Here "oob" stands for "Out-Of-Band". When "allow-oob" is set, it means
the command allows out-of-band execution.
The "oob" idea is proposed by Markus Armbruster in following thread:
https://lists.gnu.org/archive/html/qemu-devel/2017-09/msg02057.html
This new "allow-oob" boolean will be exposed by "query-qmp-schema" as
well for command entries, so that QMP clients can know which commands
can be used in out-of-band calls. For example the command "migrate"
originally looks like:
{"name": "migrate", "ret-type": "17", "meta-type": "command",
"arg-type": "86"}
And it'll be changed into:
{"name": "migrate", "ret-type": "17", "allow-oob": false,
"meta-type": "command", "arg-type": "86"}
This patch only provides the QMP interface level changes. It does not
contain the real out-of-band execution implementation yet.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-18-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase on introspection done by qlit]
Signed-off-by: Eric Blake <eblake@redhat.com>
This event will be emitted if one QMP command is dropped. Also,
declare an enum for the reasons.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-16-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
There were no QMP capabilities defined. Define the first capability,
"oob", to allow out-of-band messages.
After this patch, we will allow QMP clients to enable QMP capabilities
when sending the first "qmp_capabilities" command. Originally we are
starting QMP session with no arguments like:
{ "execute": "qmp_capabilities" }
Now we can enable some QMP capabilities using (take OOB as example,
which is the only capability that we support):
{ "execute": "qmp_capabilities",
"arguments": { "enable": [ "oob" ] } }
When the "arguments" key is not provided, no capability is enabled.
For capability "oob", the monitor needs to be run on a dedicated IO
thread, otherwise the command will fail. For example, trying to enable
OOB on a MUXed typed QMP monitor will fail.
One thing to mention is that QMP capabilities are per-monitor, and also
when the connection is closed due to some reason, the capabilities will
be reset.
Also, touch up qmp-test.c to test the new bits.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180309090006.10018-11-peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: touch up commit message]
Signed-off-by: Eric Blake <eblake@redhat.com>
We have a clear replacement, so let's deprecate it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch reworks some places which use either qobject_type() checks
plus qobject_to(), where the latter alone is sufficient, or NULL checks
plus qobject_type() checks where we can simply do a qobject_to() != NULL
check.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-6-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter ordering]
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
When doing drive mirror to a low speed shared storage, if there was heavy
BLK IO write workload in VM after the 'ready' event, drive mirror block job
can't be canceled immediately, it would keep running until the heavy BLK IO
workload stopped in the VM.
Libvirt depends on the current block-job-cancel semantics, which is that
when used without a flag after the 'ready' event, the command blocks
until data is in sync. However, these semantics are awkward in other
situations, for example, people may use drive mirror for realtime
backups while still wanting to use block live migration. Libvirt cannot
start a block live migration while another drive mirror is in progress,
but the user would rather abandon the backup attempt as broken and
proceed with the live migration than be stuck waiting for the current
drive mirror backup to finish.
The drive-mirror command already includes a 'force' flag, which libvirt
does not use, although it documented the flag as only being useful to
quit a job which is paused. However, since quitting a paused job has
the same effect as abandoning a backup in a non-paused job (namely, the
destination file is not in sync, and the command completes immediately),
we can just improve the documentation to make the force flag obviously
useful.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Jeff Cody <jcody@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Reported-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Huaitong Han <huanhuaitong@didichuxing.com>
Signed-off-by: Liang Li <liliangleo@didichuxing.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the .bdrv_co_create driver callback to vpc, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to vhdx, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to qed, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to qcow, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
This adds the .bdrv_co_create driver callback to parallels, which
enables image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
In preparation of QAPI-fying VDI image creation, we have to create a
BlockdevCreateOptionsVdi type which is received by a (future)
vdi_co_create().
vdi_co_create_opts() now converts the QemuOpts object into such a
BlockdevCreateOptionsVdi object. The protocol-layer file is still
created in vdi_co_do_create() (and BlockdevCreateOptionsVdi.file is set
to an empty string), but that will be addressed by a follow-up patch.
Note that cluster-size is not part of the QAPI schema because it is not
supported by default.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the .bdrv_co_create driver callback to luks, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Expose the "manual" property via QAPI for the backup-related jobs.
As of this commit, this allows the management API to request the
"concluded" and "dismiss" semantics for backup jobs.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of automatically transitioning from PENDING to CONCLUDED, gate
the .prepare() and .commit() phases behind an explicit acknowledgement
provided by the QMP monitor if auto_finalize = false has been requested.
This allows us to perform graph changes in prepare and/or commit so that
graph changes do not occur autonomously without knowledge of the
controlling management layer.
Transactions that have reached the "PENDING" state together can all be
moved to invoke their finalization methods by issuing block_job_finalize
to any one job in the transaction.
Jobs in a transaction with mixed job->auto_finalize settings will all
remain stuck in the "PENDING" state, as if the entire transaction was
specified with auto_finalize = false. Jobs that specified
auto_finalize = true, however, will still not emit the PENDING event.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs utilizing the new manual workflow, we intend to prohibit
them from modifying the block graph until the management layer provides
an explicit ACK via block-job-finalize to move the process forward.
To distinguish this runstate from "ready" or "waiting," we add a new
"pending" event and status.
For now, the transition from PENDING to CONCLUDED/ABORTING is automatic,
but a future commit will add the explicit block-job-finalize step.
Transitions:
Waiting -> Pending: Normal transition.
Pending -> Concluded: Normal transition.
Pending -> Aborting: Late transactional failures and cancellations.
Removed Transitions:
Waiting -> Concluded: Jobs must go to PENDING first.
Verbs:
Cancel: Can be applied to a pending job.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+-----------------+
| +--+----+ |
| | |
| +--+----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
| +--v----+ | |
+---------+WAITING<---------------+ |
| +--+----+ |
| | |
| +--v----+ |
+---------+PENDING| |
| +--+----+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED| |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<--------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs that are stuck waiting on others in a transaction, it would
be nice to know that they are no longer "running" in that sense, but
instead are waiting on other jobs in the transaction.
Jobs that are "waiting" in this sense cannot be meaningfully altered
any longer as they have left their running loop. The only meaningful
user verb for jobs in this state is "cancel," which will cancel the
whole transaction, too.
Transitions:
Running -> Waiting: Normal transition.
Ready -> Waiting: Normal transition.
Waiting -> Aborting: Transactional cancellation.
Waiting -> Concluded: Normal transition.
Removed Transitions:
Running -> Concluded: Jobs must go to WAITING first.
Ready -> Concluded: Jobs must go to WAITING first.
Verbs:
Cancel: Can be applied to WAITING jobs.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+-----------------+
| +--+----+ |
| | |
| +--v----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
| +--v----+ | |
+---------+WAITING<---------------+ |
| +--+----+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED| |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<--------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For jobs that have reached their CONCLUDED state, prior to having their
last reference put down (meaning jobs that have completed successfully,
unsuccessfully, or have been canceled), allow the user to dismiss the
job's lingering status report via block-job-dismiss.
This gives management APIs the chance to conclusively determine if a job
failed or succeeded, even if the event broadcast was missed.
Note: block_job_do_dismiss and block_job_decommission happen to do
exactly the same thing, but they're called from different semantic
contexts, so both aliases are kept to improve readability.
Note 2: Don't worry about the 0x04 flag definition for AUTO_DISMISS, she
has a friend coming in a future patch to fill the hole where 0x02 is.
Verbs:
Dismiss: operates on CONCLUDED jobs only.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new state that specifically demarcates when we begin to permanently
demolish a job after it has performed all work. This makes the transition
explicit in the STM table and highlights conditions under which a job may
be demolished.
Alongside this state, add a new helper command "block_job_decommission",
which transitions to the NULL state and puts down our implicit reference.
This separates instances in the code for "block_job_unref" which merely
undo a matching "block_job_ref" with instances intended to initiate the
full destruction of the object.
This decommission action also sets a number of fields to make sure that
block internals or external users that are holding a reference to a job
to see when it "finishes" are convinced that the job object is "done."
This is necessary, for instance, to do a block_job_cancel_sync on a
created object which will not make any progress.
Now, all jobs must go through block_job_decommission prior to being
freed, giving us start-to-finish state machine coverage for jobs.
Transitions:
Created -> Null: Early failure event before the job is started
Concluded -> Null: Standard transition.
Verbs:
None. This should not ever be visible to the monitor.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED+------------------+
| +--+----+ |
| | |
| +--v----+ +------+ |
+---------+RUNNING<----->PAUSED| |
| +--+-+--+ +------+ |
| | | |
| | +------------------+ |
| | | |
| +--v--+ +-------+ | |
+---------+READY<------->STANDBY| | |
| +--+--+ +-------+ | |
| | | |
+--v-----+ +--v------+ | |
|ABORTING+--->CONCLUDED<-------------+ |
+--------+ +--+------+ |
| |
+--v-+ |
|NULL<---------------------+
+----+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
add a new state "CONCLUDED" that identifies a job that has ceased all
operations. The wording was chosen to avoid any phrasing that might
imply success, error, or cancellation. The task has simply ceased all
operation and can never again perform any work.
("finished", "done", and "completed" might all imply success.)
Transitions:
Running -> Concluded: normal completion
Ready -> Concluded: normal completion
Aborting -> Concluded: error and cancellations
Verbs:
None as of this commit. (a future commit adds 'dismiss')
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED|
| +--+----+
| |
| +--v----+ +------+
+---------+RUNNING<----->PAUSED|
| +--+-+--+ +------+
| | |
| | +------------------+
| | |
| +--v--+ +-------+ |
+---------+READY<------->STANDBY| |
| +--+--+ +-------+ |
| | |
+--v-----+ +--v------+ |
|ABORTING+--->CONCLUDED<-------------+
+--------+ +---------+
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new state ABORTING.
This makes transitions from normative states to error states explicit
in the STM, and serves as a disambiguation for which states may complete
normally when normal end-states (CONCLUDED) are added in future commits.
Notably, Paused/Standby jobs do not transition directly to aborting,
as they must wake up first and cooperate in their cancellation.
Transitions:
Created -> Aborting: can be cancelled (by the system)
Running -> Aborting: can be cancelled or encounter an error
Ready -> Aborting: can be cancelled or encounter an error
Verbs:
None. The job must finish cleaning itself up and report its final status.
+---------+
|UNDEFINED|
+--+------+
|
+--v----+
+---------+CREATED|
| +--+----+
| |
| +--v----+ +------+
+---------+RUNNING<----->PAUSED|
| +--+----+ +------+
| |
| +--v--+ +-------+
+---------+READY<------->STANDBY|
| +-----+ +-------+
|
+--v-----+
|ABORTING|
+--------+
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Which commands ("verbs") are appropriate for jobs in which state is
also somewhat burdensome to keep track of.
As of this commit, it looks rather useless, but begins to look more
interesting the more states we add to the STM table.
A recurring theme is that no verb will apply to an 'undefined' job.
Further, it's not presently possible to restrict the "pause" or "resume"
verbs any more than they are in this commit because of the asynchronous
nature of how jobs enter the PAUSED state; justifications for some
seemingly erroneous applications are given below.
=====
Verbs
=====
Cancel: Any state except undefined.
Pause: Any state except undefined;
'created': Requests that the job pauses as it starts.
'running': Normal usage. (PAUSED)
'paused': The job may be paused for internal reasons,
but the user may wish to force an indefinite
user-pause, so this is allowed.
'ready': Normal usage. (STANDBY)
'standby': Same logic as above.
Resume: Any state except undefined;
'created': Will lift a user's pause-on-start request.
'running': Will lift a pause request before it takes effect.
'paused': Normal usage.
'ready': Will lift a pause request before it takes effect.
'standby': Normal usage.
Set-speed: Any state except undefined, though ready may not be meaningful.
Complete: Only a 'ready' job may accept a complete request.
=======
Changes
=======
(1)
To facilitate "nice" error checking, all five major block-job verb
interfaces in blockjob.c now support an errp parameter:
- block_job_user_cancel is added as a new interface.
- block_job_user_pause gains an errp paramter
- block_job_user_resume gains an errp parameter
- block_job_set_speed already had an errp parameter.
- block_job_complete already had an errp parameter.
(2)
block-job-pause and block-job-resume will no longer no-op when trying
to pause an already paused job, or trying to resume a job that isn't
paused. These functions will now report that they did not perform the
action requested because it was not possible.
iotests have been adjusted to address this new behavior.
(3)
block-job-complete doesn't worry about checking !block_job_started,
because the permission table guards against this.
(4)
test-bdrv-drain's job implementation needs to announce that it is
'ready' now, in order to be completed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We're about to add several new states, and booleans are becoming
unwieldly and difficult to reason about. It would help to have a
more explicit bookkeeping of the state of blockjobs. To this end,
add a new "status" field and add our existing states in a redundant
manner alongside the bools they are replacing:
UNDEFINED: Placeholder, default state. Not currently visible to QMP
unless changes occur in the future to allow creating jobs
without starting them via QMP.
CREATED: replaces !!job->co && paused && !busy
RUNNING: replaces effectively (!paused && busy)
PAUSED: Nearly redundant with info->paused, which shows pause_count.
This reports the actual status of the job, which almost always
matches the paused request status. It differs in that it is
strictly only true when the job has actually gone dormant.
READY: replaces job->ready.
STANDBY: Paused, but job->ready is true.
New state additions in coming commits will not be quite so redundant:
WAITING: Waiting on transaction. This job has finished all the work
it can until the transaction converges, fails, or is canceled.
PENDING: Pending authorization from user. This job has finished all the
work it can until the job or transaction is finalized via
block_job_finalize. This implies the transaction has converged
and left the WAITING phase.
ABORTING: Job has encountered an error condition and is in the process
of aborting.
CONCLUDED: Job has ceased all operations and has a return code available
for query and may be dismissed via block_job_dismiss.
NULL: Job has been dismissed and (should) be destroyed. Should never
be visible to QMP.
Some of these states appear somewhat superfluous, but it helps define the
expected flow of a job; so some of the states wind up being synchronous
empty transitions. Importantly, jobs can be in only one of these states
at any given time, which helps code and external users alike reason about
the current condition of a job unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>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=QeRU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/socket-next-pull-request' into staging
# gpg: Signature made Tue 13 Mar 2018 18:12:14 GMT
# gpg: using RSA key BE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/socket-next-pull-request:
char: allow passing pre-opened socket file descriptor at startup
char: refactor parsing of socket address information
sockets: allow SocketAddress 'fd' to reference numeric file descriptors
sockets: check that the named file descriptor is a socket
sockets: move fd_is_socket() into common sockets code
sockets: strengthen test suite IP protocol availability checks
sockets: pull code for testing IP availability out of specific test
cutils: add qemu_strtoi & qemu_strtoui parsers for int/unsigned int types
char: don't silently skip tn3270 protocol init when TLS is enabled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add special state, when qmp operations on the bitmap are disabled.
It is needed during bitmap migration. "Frozen" state is not
appropriate here, because it looks like bitmap is unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180207155837.92351-5-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
The SocketAddress 'fd' kind accepts the name of a file descriptor passed
to the monitor with the 'getfd' command. This makes it impossible to use
the 'fd' kind in cases where a monitor is not available. This can apply in
handling command line argv at startup, or simply if internal code wants to
use SocketAddress and pass a numeric FD it has acquired from elsewhere.
Fortunately the 'getfd' command mandated that the FD names must not start
with a leading digit. We can thus safely extend semantics of the
SocketAddress 'fd' kind, to allow a purely numeric name to reference an
file descriptor that QEMU already has open. There will be restrictions on
when each kind can be used.
In codepaths where we are handling a monitor command (ie cur_mon != NULL),
we will only support use of named file descriptors as before. Use of FD
numbers is still not permitted for monitor commands.
In codepaths where we are not handling a monitor command (ie cur_mon ==
NULL), we will not support named file descriptors. Instead we can reference
FD numers explicitly. This allows the app spawning QEMU to intentionally
"leak" a pre-opened socket to QEMU and reference that in a SocketAddress
definition, or for code inside QEMU to pass pre-opened FDs around.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The command can be used by libvirt to query the SEV capabilities.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command can be used by libvirt to retrieve the measurement of SEV guest.
This measurement is a signature of the memory contents that was encrypted
through the LAUNCH_UPDATE_DATA.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QMP query command can used to retrieve the SEV information when
memory encryption is enabled on AMD platform.
Cc: Eric Blake <eblake@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU's screendump command can only take dumps from the primary display.
When using multiple VGA cards, there is no way to get a dump from a
secondary card or other display heads yet. So let's add a 'device' and
a 'head' parameter to the HMP and QMP commands to be able to specify
alternative devices and heads with the screendump command, too.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1520267868-31778-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds the .bdrv_co_create driver callback to ssh, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This makes the host-key-check option available in blockdev-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to sheepdog, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The "redundancy" option for Sheepdog image creation is currently a
string that can encode one or two integers depending on its format,
which at the same time implicitly selects a mode.
This patch turns it into a QAPI union and converts the string into such
a QAPI object before interpreting the values.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to nfs, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to rbd, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds the .bdrv_co_create driver callback to gluster, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds the .bdrv_co_create driver callback to file, which enables
image creation over QMP.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This adds a synchronous x-blockdev-create QMP command that can create
qcow2 images on a given node name.
We don't want to block while creating an image, so this is not the final
interface in all aspects, but BlockdevCreateOptionsQcow2 and
.bdrv_co_create() are what they actually might look like in the end. In
any case, this should be good enough to test whether we interpret
BlockdevCreateOptions as we should.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This creates a BlockdevCreateOptions union type that will contain all of
the options for image creation. We'll start out with an empty struct
type BlockdevCreateNotSupported for all drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds RISC-V into the build system enabling the following targets:
- riscv32-softmmu
- riscv64-softmmu
- riscv32-linux-user
- riscv64-linux-user
This adds defaults configs for RISC-V, enables the build for the RISC-V
CPU core, hardware, and Linux User Emulation. The 'qemu-binfmt-conf.sh'
script is updated to add the RISC-V ELF magic.
Expected checkpatch errors for consistency reasons:
ERROR: line over 90 characters
FILE: scripts/qemu-binfmt-conf.sh
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
There is already 'device-list-properties' which does most of the job,
however it does not handle everything returned by qom-list-types such
as machines as they inherit directly from TYPE_OBJECT and not TYPE_DEVICE.
It does not handle abstract classes either.
This adds a new qom-list-properties command which prints properties
of a specific class and its instance. It is pretty much a simplified copy
of the device-list-properties handler.
Since it creates an object instance, device properties should appear
in the output as they are copied to QOM properties at the instance_init
hook.
This adds a object_class_property_iter_init() helper to allow class
properties enumeration uses it in the new QMP command to allow properties
listing for abstract classes.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-3-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ObjectPropertyInfo is more generic and only missing @description.
This adds a description to ObjectPropertyInfo and removes
DevicePropertyInfo so the resulting ObjectPropertyInfo can be used
elsewhere.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20180301130939.15875-2-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----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=2axz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (38 commits)
block: Fix NULL dereference on empty drive error
qcow2: Replace align_offset() with ROUND_UP()
block/ssh: Add basic .bdrv_truncate()
block/ssh: Make ssh_grow_file() blocking
block/ssh: Pull ssh_grow_file() from ssh_create()
qemu-img: Make resize error message more general
qcow2: make qcow2_co_create2() a coroutine_fn
block: rename .bdrv_create() to .bdrv_co_create_opts()
Revert "IDE: Do not flush empty CDROM drives"
block: test blk_aio_flush() with blk->root == NULL
block: add BlockBackend->in_flight counter
block: extract AIO_WAIT_WHILE() from BlockDriverState
aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
docs: document how to use the l2-cache-entry-size parameter
specs/qcow2: Fix documentation of the compressed cluster descriptor
iotest 033: add misaligned write-zeroes test via truncate
block: fix write with zero flag set and iovector provided
block: Drop unused .bdrv_co_get_block_status()
vvfat: Switch to .bdrv_co_block_status()
vpc: Switch to .bdrv_co_block_status()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/block/block.h
blk_error_action() sends a BLOCK_IO_ERROR QMP event which includes the
node name of its root node. If the BlockBackend represents an empty
drive, there is no root node, so we should not try to access its node
name. Make the field optional in the event and include it only when
the BlockBackend isn't empty.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJanLRTAAoJEO8Ells5jWIRAxsH/3wX62o+msLjJHakjcu2OTMG
vdhnB8GfjC5HgMYbovG7TJ95KXg7VRodwru9zgJheTK7DG8fG0nFRuzr8L2tSAph
3s0YTFYDXJ6MBYD//ubdX+jNnchIvMlTX6yheAzcXvQb+nCcN2efN0XpSlGR+g4D
wGi1lWKurGEJE6RUfYPpbbUkjXjbbKyclE0RL+WBmmyruerXI8OxuXQ3GuHK75fb
cZLiToyP9+qnnDyT4lceG5vGRjYLtL8t1nB01M4UTr+tlCkMMsoOjufzGB/CDUdm
oGi1OuKRw06xTLroUJ/uiwSKQH6dMbrv6sLvk92dHnL9k2ZAjv2bVAgz8eAG7o0=
=pPIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: setting error appropriately when calling net_init_tap_one()
hw/net: Remove unnecessary header includes
net: Add a new convenience option "--nic" to configure default/on-board NICs
net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands
net: Remove the deprecated way of dumping network packets
net: Make net_client_init() static
net: Only show vhost-user in the help text if CONFIG_POSIX is defined
net: List available netdevs with "-netdev help"
net: Move error reporting from net_init_client/netdev to the calling site
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f0df84c6 added watchdog-set-action in the main qapi-schema.json,
but it belongs better in qapi/run-state.json alongside the definition
of WatchdogAction. The command was written prior to commit 0e201d34
creating the latter file, even though it was merged after.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180226225744.26356-1-eblake@redhat.com>
This patch is the s390 implementation of guest crash information,
similar to commit d187e08dc4 ("i386/cpu: add crash-information QOM
property") and the related commits. We will detect several crash
reasons, with the "disabled wait" being the most important one, since
this is used by all s390 guests as a "panic like" notification.
Demonstrate these ways with examples as follows.
1. crash-information QOM property;
Run qemu with -qmp unix:qmp-sock,server, then use utility "qmp-shell"
to execute "qom-get" command, and might get the result like,
(QEMU) (QEMU) qom-get path=/machine/unattached/device[0] \
property=crash-information
{"return": {"core": 0, "reason": "disabled-wait", "psw-mask": 562956395872256, \
"type": "s390", "psw-addr": 1102832}}
2. GUEST_PANICKED event reporting;
Run qemu with a socket option, and telnet or nc to that,
-chardev socket,id=qmp,port=4444,host=localhost,server \
-mon chardev=qmp,mode=control,pretty=on \
Negotiating the mode by { "execute": "qmp_capabilities" }, and the crash
information will be reported on a guest crash event like,
{
"timestamp": {
"seconds": 1518004739,
"microseconds": 552563
},
"event": "GUEST_PANICKED",
"data": {
"action": "pause",
"info": {
"core": 0,
"psw-addr": 1102832,
"reason": "disabled-wait",
"psw-mask": 562956395872256,
"type": "s390"
}
}
}
3. log;
Run qemu with the parameters: -D <logfile> -d guest_errors, to
specify the logfile and log item. The results might be,
Guest crashed on cpu 0: disabled-wait
PSW: 0x0002000180000000 0x000000000010d3f0
Co-authored-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180209122543.25755-1-borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[CH: tweaked qapi comment]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Switch over all leftover users to qapi DisplayType.
Then delete the unused display_type variable.
Add 'default' DisplayType, which isn't an actual display type but
a placeholder for "user didn't specify a display". It will be replaced
by the DisplayType actually used, which in turn depends on the
DisplayTypes availabel in the particular build.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-13-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add QAPI DisplayType enum, DisplayOptions union and DisplayGTK struct.
Switch gtk configuration to use the qapi type.
Some bookkeeping (fullscreen for example) is done twice now, this is
temporary until more/all UIs are switched over to qapi configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20180202111022.19269-5-kraxel@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note that the 'Add test for migration to bad destination' displays
a 'Connection refused' during running, but still gives the correct exit
code and OK (It's checking that the source doesn't fail when
it can't connect, so that's the right error).
If it's particularly disliked that patch can be skipped individually.
-----BEGIN PGP SIGNATURE-----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=drNV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20180214a' into staging
Migration pull 20180214
Note that the 'Add test for migration to bad destination' displays
a 'Connection refused' during running, but still gives the correct exit
code and OK (It's checking that the source doesn't fail when
it can't connect, so that's the right error).
If it's particularly disliked that patch can be skipped individually.
# gpg: Signature made Wed 14 Feb 2018 15:33:04 GMT
# gpg: using RSA key 0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20180214a:
migration: pass MigrationState to migrate_init()
migration: allow send_rq to fail
migration: provide postcopy_fault_thread_notify()
migration: reuse mis->userfault_quit_fd
migration: better error handling with QEMUFile
tests/migration: Add test for migration to bad destination
migration: Fix early failure cleanup
tests/migration: Add source to PC boot block
migration: improve documentation of postcopy-ram
migration/xen: Check return value of qemu_fclose
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This capability must have the same value on both source and destination,
otherwise migration fails (commit 875fcd013a "migration: incoming
postcopy advise sanity checks").
Let's write it down in various places where postcopy-ram is documented.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <151801810352.29167.4832480228518630626.stgit@bahia.lan>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Now that the code is ready to handle L2 slices we can finally add an
option to allow configuring their size.
An L2 slice is the portion of an L2 table that is read by the qcow2
cache. Until now the cache was always reading full L2 tables, and
since the L2 table size is equal to the cluster size this was not very
efficient with large clusters. Here's a more detailed explanation of
why it makes sense to have smaller cache entries in order to load L2
data:
https://lists.gnu.org/archive/html/qemu-block/2017-09/msg00635.html
This patch introduces a new command-line option to the qcow2 driver
named l2-cache-entry-size (cf. l2-cache-size). The cache entry size
has the same restrictions as the cluster size: it must be a power of
two and it has the same range of allowed values, with the additional
requirement that it must not be larger than the cluster size.
The L2 cache entry size (L2 slice size) remains equal to the cluster
size for now by default, so this feature must be explicitly enabled.
Although my tests show that 4KB slices consistently improve
performance and give the best results, let's wait and make more tests
with different cluster sizes before deciding on an optimal default.
Now that the cache entry size is not necessarily equal to the cluster
size we need to reflect that in the MIN_L2_CACHE_SIZE documentation.
That minimum value is a requirement of the COW algorithm: we need to
read two L2 slices (and not two L2 tables) in order to do COW, see
l2_allocate() for the actual code.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: c73e5611ff4a9ec5d20de68a6c289553a13d2354.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
To maintain load/store disabled bitmap there is new approach:
- deprecate @autoload flag of block-dirty-bitmap-add, make it ignored
- store enabled bitmaps as "auto" to qcow2
- store disabled bitmaps without "auto" flag to qcow2
- on qcow2 open load "auto" bitmaps as enabled and others
as disabled (except in_use bitmaps)
Also, adjust iotests 165 and 176 appropriately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180202160752.143796-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-11-armbru@redhat.com>
The macro expansions of qdict_put_TYPE() and qlist_append_TYPE() need
qbool.h, qnull.h, qnum.h and qstring.h to compile. We include qnull.h
and qnum.h in the headers, but not qbool.h and qstring.h. Works,
because we include those wherever the macros get used.
Open-coding these helpers is of dubious value. Turn them into
functions and drop the includes from the headers.
This cleanup makes the number of objects depending on qapi/qmp/qnum.h
from 4551 (out of 4743) to 46 in my "build everything" tree. For
qapi/qmp/qnull.h, the number drops from 4552 to 21.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-10-armbru@redhat.com>
qapi/qmp/types.h is a convenience header to include a number of
qapi/qmp/ headers. Since we rarely need all of the headers
qapi/qmp/types.h includes, we bypass it most of the time. Most of the
places that use it don't need all the headers, either.
Include the necessary headers directly, and drop qapi/qmp/types.h.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-9-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-6-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-4-armbru@redhat.com>
Add an option which allows the user to specify a PCI BAR number,
including an 'off' and 'auto' selection.
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
keycodemapdb updated to add the QKeyCodes muhenkan and katakanahiragana
Signed-off-by: Miika S <miika9764@gmail.com>
Message-Id: <20180116134217.8725-12-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB)
Interface as defined in TCG PC Client Platform TPM Profile (PTP)
Specification Family “2.0” Level 00 Revision 01.03 v22.
The PTP allows device implementation to switch between TIS and CRB
model at run time, but given that CRB is a simpler device to
implement, I chose to implement it as a different device.
The device doesn't implement other locality than 0 for now (my laptop
TPM doesn't either, so I assume this isn't so bad)
Tested with some success with Linux upstream and Windows 10, seabios &
modified ovmf. The device is recognized and correctly transmit
command/response with passthrough & emu. However, we are missing PPI
ACPI part atm.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Version: GnuPG v1
iQEcBAABAgAGBQJabtfbAAoJEO8Ells5jWIROgUH/2SeXD7Du1w0Ry5Bc7uKBR51
jGm+324jfT5mqajlWQ5rGMTEUHLGX8H4s05FT3/gTl0xTea5rSrUTeW+7RgJaE+N
pOaF0vEhms3sg9rZoF84XlkKjKKsZvAFcK4QRrp4Jc1djQQmOc7d+7wbiGFN5+Ii
OCzq3V4hhVhyFvpasP92aIxdvmz4yW1Vng35njVLm7xTyblMm4mQ/S6qH+/j5UXT
8vEheABU5nt9XTMJO8FaeFe2XzsXgV9ng5NiwR7aPLdghRFffSKUsxTsDJ061BIJ
PbJh/XpELIgsscK6SpEhACeV2gcr2qYbqXS94kWNXziEYdl+oU7ZYLEEMdQIKeE=
=sd76
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 29 Jan 2018 08:14:19 GMT
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
MAINTAINERS: update Dmitry Fleytman email
qemu-doc: Get rid of "vlan=X" example in the documentation
net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove'
net: Allow hubports to connect to other netdevs
colo: compare the packet based on the tcp sequence number
colo: modified the payload compare function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QEMU can emulate hubs to connect NICs and netdevs. This is currently
primarily used for the mis-named 'vlan' feature of the networking
subsystem. Now the 'vlan' feature has been marked as deprecated, since
its name is rather confusing and the users often rather mis-configure
their network when trying to use it. But while the 'vlan' parameter
should be removed at one point in time, the basic idea of emulating
a hub in QEMU is still good: It's useful for bundling up the output of
multiple NICs into one single l2tp netdev for example.
Now to be able to use the hubport feature without 'vlan's, there is one
missing piece: The possibility to connect a hubport to a netdev, too.
This patch adds this possibility by introducing a new "netdev=..."
parameter to the hubports.
To bundle up the output of multiple NICs into one socket netdev, you can
now run QEMU with these parameters for example:
qemu-system-ppc64 ... -netdev socket,id=s1,connect=:11122 \
-netdev hubport,hubid=1,id=h1,netdev=s1 \
-netdev hubport,hubid=1,id=h2 -device e1000,netdev=h2 \
-netdev hubport,hubid=1,id=h3 -device virtio-net-pci,netdev=h3
For using the socket netdev, you have got to start another QEMU as the
receiving side first, for example with network dumping enabled:
qemu-system-x86_64 -M isapc -netdev socket,id=s0,listen=:11122 \
-device ne2k_isa,netdev=s0 \
-object filter-dump,id=f1,netdev=s0,file=/tmp/dump.dat
After the ppc64 guest tried to boot from both NICs, you can see in the
dump file (using Wireshark, for example), that the output of both NICs
(the e1000 and the virtio-net-pci) has been successfully transfered
via the socket netdev in this case.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add command for removing an export. It is needed for cases when we
don't want to keep the export after the operation on it was completed.
The other example is a temporary node, created with blockdev-add.
If we want to delete it we should firstly remove any corresponding
NBD export.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180119135719.24745-3-vsementsov@virtuozzo.com>
[eblake: drop dead nb_clients code]
Signed-off-by: Eric Blake <eblake@redhat.com>
Allow user to specify name for new export, to not reuse internal
node name and to not show it to clients.
This also allows creating several exports per device.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180119135719.24745-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
-----BEGIN PGP SIGNATURE-----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=gjNZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Tue 23 Jan 2018 12:38:36 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (29 commits)
iotests: Disable some tests for compat=0.10
iotests: Split 177 into two parts for compat=0.10
iotests: Make 059 pass on machines with little RAM
iotests: Filter compat-dependent info in 198
iotests: Make 191 work with qcow2 options
iotests: Make 184 image-less
iotests: Make 089 compatible with compat=0.10
iotests: Fix 067 for compat=0.10
iotests: Fix 059's reference output
iotests: Fix 051 for compat=0.10
iotests: Fix 020 for vmdk
iotests: Skip 103 for refcount_bits=1
iotests: Forbid 020 for non-file protocols
iotests: Drop format-specific in _filter_img_info
iotests: Fix _img_info for backslashes
block/vmdk: Add blkdebug events
block/qcow: Add blkdebug events
qcow2: No persistent dirty bitmaps for compat=0.10
block/vmdk: Fix , instead of ; at end of line
qemu-iotests: Fix locking issue in 102
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
v2:
* Drop merge failure from a previous pull request that broke virtio-blk on ARM
guests
* Add Parallels XML patch series
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaZgqoAAoJEJykq7OBq3PIwNIIAKD8OwjeQdtznD88ikMGd5CF
PvBHOIXIX7GCaKdAFEP1MMB0xaTN93zhphPZfcQxnnbi2LrnzuP2WCSunKPPcGQJ
ToMRxYV+OkS0Rm8/us9fQpmBf2PKouIlNXP4jZZuEYAmyZgoU7YBQHYP1sw2K6RE
MHPBdKMKzb+S8u+HBx+oy1LQ0cKKRjCYXhdQ4p7rlWkXc5irQQh9d12W/EHS++cd
5wgX5V3aj4rXD4XwXY/kgDXtSG37sgNOHx77W7gDO3KuBolEBVvPvbP7yrCZzfcC
pGLPKwXnHTxOKlwLQ0weD+uIsJWv6XGKLhgX+MFWCVU1PvPuSTWcqfBplgTUU6s=
=mjmD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
v2:
* Drop merge failure from a previous pull request that broke virtio-blk on ARM
guests
* Add Parallels XML patch series
# gpg: Signature made Mon 22 Jan 2018 16:00:40 GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block/parallels: add backing support to readv/writev
block/parallels: replace some magic numbers
block/parallels: move some structures into header
configure: add dependency
docs/interop/prl-xml: description of Parallels Disk format
block: add block_set_io_throttle virtio-blk-pci QMP example
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that iotest 093 test proves that the throttling configuration
survives a blockdev-remove-medium/blockdev-insert-medium pair, the
original reason for declaring these commands experimental is gone
(see commit 6e0abc251d).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-5-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is an incompatible change, which is fine as the commands are
experimental.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-4-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The block_set_io_throttle command can look up BlockBackends by the
attached qdev device ID. virtio-blk-pci is a special case because the
actual VirtIOBlock device is the "/virtio-backend" child of the PCI
adapter device.
Add a QMP schema example so clients will know how to use
block_set_io_throttle on the virtio-blk-pci device.
The alternative is to implement some sort of aliasing for qmp_get_blk()
but that is likely to cause confusion and could break future use cases.
Let's not go there.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180117090700.25811-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Postcopy total blocktime is available on destination side only.
But query-migrate was possible only for source. This patch
adds ability to call query-migrate on destination.
To be able to see postcopy blocktime, need to request postcopy-blocktime
capability.
The query-migrate command will show following sample result:
{"return":
"postcopy-vcpu-blocktime": [115, 100],
"status": "completed",
"postcopy-blocktime": 100
}}
postcopy_vcpu_blocktime contains list, where the first item is the first
vCPU in QEMU.
This patch has a drawback, it combines states of incoming and
outgoing migration. Ongoing migration state will overwrite incoming
state. Looks like better to separate query-migrate for incoming and
outgoing migration or add parameter to indicate type of migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Right now it could be used on destination side to
enable vCPU blocktime calculation for postcopy live migration.
vCPU blocktime - it's time since vCPU thread was put into
interruptible sleep, till memory page was copied and thread awake.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We use int for everything (int64_t), and then we check that value is
between 0 and 255. Change it to the valid types.
This change only happens for HMP. QMP always use bytes and similar.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Removing a quorum child node with x-blockdev-change results in a quorum
driver state that cannot be recreated with create options because it
would require a list with gaps. This causes trouble in at least
.bdrv_refresh_filename().
Document this problem so that we won't accidentally mark the command
stable without having addressed it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
When a node is already associated with a BlockBackend the
x-blockdev-set-iothread command refuses to set the IOThread. This is to
prevent accidentally changing the IOThread when the nodes are in use.
When the nodes are created with -drive they automatically get a
BlockBackend. In that case we know nothing is using them yet and it's
safe to set the IOThread. Add a force boolean to override the check.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171207201320.19284-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently there is no easy way for iotests to ensure that a BDS is bound
to a particular IOThread. Normally the virtio-blk device calls
blk_set_aio_context() when dataplane is enabled during guest driver
initialization. This never happens in iotests since -machine
accel=qtest means there is no guest activity (including device driver
initialization).
This patch adds a QMP command to explicitly assign IOThreads in test
cases. See qapi/block-core.json for a description of the command.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20171206144550.22295-9-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When you cancel an in-progress 'mirror' job (or "active `block-commit`")
with QMP `block-job-cancel`, it emits the event: BLOCK_JOB_CANCELLED.
However, when `block-job-cancel` is issued *after* `drive-mirror` has
indicated (via the event BLOCK_JOB_READY) that the source and
destination have reached synchronization:
[...] # Snip `drive-mirror` invocation & outputs
{
"execute":"block-job-cancel",
"arguments":{
"device":"virtio0"
}
}
{"return": {}}
It (`block-job-cancel`) will counterintuitively emit the event
'BLOCK_JOB_COMPLETED':
{
"timestamp":{
"seconds":1510678024,
"microseconds":526240
},
"event":"BLOCK_JOB_COMPLETED",
"data":{
"device":"virtio0",
"len":41126400,
"offset":41126400,
"speed":0,
"type":"mirror"
}
}
But this is expected behaviour, where the _COMPLETED event indicates
that synchronization has successfully ended (and the destination now has
a point-in-time copy, which is at the time of cancel).
So add a small note to this effect in 'block-core.json'. While at it,
also update the "Live disk synchronization -- drive-mirror and
blockdev-mirror" section in 'live-block-operations.rst'.
(Thanks: Max Reitz for reminding me of this caveat on IRC.)
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When doing a live migration of a Xen guest with libxl, the images for
block devices are locked by the original QEMU process, and this prevent
the QEMU at the destination to take the lock and the migration fail.
>From QEMU point of view, once the RAM of a domain is migrated, there is
two QMP commands, "stop" then "xen-save-devices-state", at which point a
new QEMU is spawned at the destination.
Release locks in "xen-save-devices-state" so the destination can takes
them, if it's a live migration.
This patch add the "live" parameter to "xen-save-devices-state" which
default to true so older version of libxenlight can work with newer
version of QEMU.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20171114180128.17076-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_set_read_only() is used by some block drivers to override the
read-only option given by the user. This is not how read-only images
generally work in QEMU: Instead of second guessing what the user really
meant (which currently includes making an image read-only even if the
user didn't only use the default, but explicitly said read-only=off), we
should error out if we can't provide what the user requested.
This adds deprecation warnings to all callers of bdrv_set_read_only() so
that the behaviour can be corrected after the usual deprecation period.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now it is a variable in MigrationState instead of a
MigrationParameter. The change allows to set it as the rest of the
Migration parameters, from the command line, with
query_migration_paramters, set_migrate_parameters, etc.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
A new qmp command allows the caller to continue from a given
paused state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add two statuses for use when the 'pause-before-switchover'
capability is enabled.
'pre-switchover' is the state that we wait in for management
to allow us to continue.
'device' is the state we enter while serialising the devices
after management gives us the OK.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When 'pause-before-switchover' is enabled, the outgoing migration
will pause before invalidating the block devices and serializing
the device state.
At this point the management layer gets the chance to clean up any
device jobs or other device users before the migration completes.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The 'sysrq' key was mistakenly added to QEMU to deal with incorrect handling
of the 'print' key in the ps2 device:
commit f2289cb692
Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Wed Jun 4 10:14:16 2008 +0000
Add sysrq to key names known by "sendkey".
Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:
(qemu) sendkey alt-sysrq-t
Tested on x86-64 target and Linux guest.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
The ps2 device is now fixed wrt modifiers and the 'print' key. Further the
handling of the 'sysrq' key has some problems of its own, documented in the
previous commit. To cleanup this mess, we convert any use of 'sysrq' into
'print' prior to dispatching the event to device models.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-9-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This change introduces a new TPM backend driver that can communicate with
swtpm(software TPM emulator) using unix domain socket interface. QEMU talks to
the TPM emulator using QEMU's socket-based chardev backend device.
Swtpm uses two Unix sockets for communications, one for plain TPM commands and
responses, and one for out-of-band control messages. QEMU passes the data
socket to be used over the control channel.
The swtpm and associated tools can be found here:
https://github.com/stefanberger/swtpm
The swtpm's control channel protocol specification can be found here:
https://github.com/stefanberger/swtpm/wiki/Control-Channel-Specification
Usage:
# setup TPM state directory
mkdir /tmp/mytpm
chown -R tss:root /tmp/mytpm
/usr/bin/swtpm_setup --tpm-state /tmp/mytpm --createek
# Ask qemu to use TPM emulator with given tpm state directory
qemu-system-x86_64 \
[...] \
-chardev socket,id=chrtpm,path=/tmp/swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis,tpmdev=tpm0 \
[...]
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Make it possible to inject errors on writes performed during a
read operation due to copy-on-read semantics.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new name is WatchdogAction which is shorter,
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <dbd61a0928821348486d0d6260be2bd3b02b6402.1504771369.git.mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch add shrinking of the image file for qcow2. As a result, this allows
us to reduce the virtual image size and free up space on the disk without
copying the image. Image can be fragmented and shrink is done by punching holes
in the image file.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170918124230.8152-4-pbutsykin@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Indicates how many pages we are going to send in each batch to a multifd
thread.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Be consistent with defaults and documentation
Use new DEFINE_PROP_*
Rename x-multifd-group to x-multifd-page-count
Indicates the number of channels that we will create. By default we
create 2 channels.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
--
Catch inconsistent defaults (eric).
Improve comment stating that number of threads is the same than number
of sockets
Use new DEFIN_PROP_*
Rename x-multifd-threads to x-multifd-threads
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
--
Use new DEFINE_PROP
It is a common requirement for virtual machine to send persistent
reservations, but this currently requires either running QEMU with
CAP_SYS_RAWIO, or using out-of-tree patches that let an unprivileged
QEMU bypass Linux's filter on SG_IO commands.
As an alternative mechanism, the next patches will introduce a
privileged helper to run persistent reservation commands without
expanding QEMU's attack surface unnecessarily.
The helper is invoked through a "pr-manager" QOM object, to which
file-posix.c passes SG_IO requests for PERSISTENT RESERVE OUT and
PERSISTENT RESERVE IN commands. For example:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-drive if=none,id=hd,driver=raw,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
or:
$ qemu-system-x86_64
-device virtio-scsi \
-object pr-manager-helper,id=helper0,path=/var/run/qemu-pr-helper.sock
-blockdev node-name=hd,driver=raw,file.driver=host_device,file.filename=/dev/sdb,file.pr-manager=helper0
-device scsi-block,drive=hd
Multiple pr-manager implementations are conceivable and possible, though
only one is implemented right now. For example, a pr-manager could:
- talk directly to the multipath daemon from a privileged QEMU
(i.e. QEMU links to libmpathpersist); this makes reservation work
properly with multipath, but still requires CAP_SYS_RAWIO
- use the Linux IOC_PR_* ioctls (they require CAP_SYS_ADMIN though)
- more interestingly, implement reservations directly in QEMU
through file system locks or a shared database (e.g. sqlite)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
block/throttle.c uses existing I/O throttle infrastructure inside a
block filter driver. I/O operations are intercepted in the filter's
read/write coroutines, and referred to block/throttle-groups.c
The driver can be used with the syntax
-drive driver=throttle,file.filename=foo.qcow2,throttle-group=bar
which registers the throttle filter node with the ThrottleGroup 'bar'. The
given group must be created beforehand with object-add or -object.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ThrottleGroup is converted to an object. This will allow the future
throttle block filter drive easy creation and configuration of throttle
groups in QMP and cli.
A new QAPI struct, ThrottleLimits, is introduced to provide a shared
struct for all throttle configuration needs in QMP.
ThrottleGroups can be created via CLI as
-object throttle-group,id=foo,x-iops-total=100,x-..
where x-* are individual limit properties. Since we can't add non-scalar
properties in -object this interface must be used instead. However,
setting these properties must be disabled after initialization because
certain combinations of limits are forbidden and thus configuration
changes should be done in one transaction. The individual properties
will go away when support for non-scalar values in CLI is implemented
and thus are marked as experimental.
ThrottleGroup also has a `limits` property that uses the ThrottleLimits
struct. It can be used to create ThrottleGroups or set the
configuration in existing groups as follows:
{ "execute": "object-add",
"arguments": {
"qom-type": "throttle-group",
"id": "foo",
"props" : {
"limits": {
"iops-total": 100
}
}
}
}
{ "execute" : "qom-set",
"arguments" : {
"path" : "foo",
"property" : "limits",
"value" : {
"iops-total" : 99
}
}
}
This also means a group's configuration can be fetched with qom-get.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
