clang complains about taking the address of a packed
member of a struct:
target/i386/kvm.c:1245:27: warning: taking address of packed member 'cpuid' of class or structure '' may result in an unaligned pointer value [-Waddress-of-packed-member]
c = cpuid_find_entry(&cpuid_data.cpuid, 1, 0);
^~~~~~~~~~~~~~~~
target/i386/kvm.c:1297:31: warning: taking address of packed member 'cpuid' of class or structure '' may result in an unaligned pointer value [-Waddress-of-packed-member]
c = cpuid_find_entry(&cpuid_data.cpuid, kvm_base, 0);
^~~~~~~~~~~~~~~~
The kernel's definitions of struct kvm_cpuid2 and struct
kvm_cpuid_entry2 are carefully set up with padding fields
so that there is no between-struct padding anyway, so
the QEMU_PACKED annotation is unnecessary and might result
in the compiler generating worse code. Drop it, and instead
assert at build time that there is no stray padding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20181210114654.31433-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There is really no difference between live migration and savevm, except
that savevm does not require bdrv_invalidate_cache to be implemented
by all disks. However, it is unlikely that savevm is used with anything
except qcow2 disks, so the penalty is small and worth the improvement
in catching bad usage of savevm.
Only one place was taking care of savevm when adding a migration blocker,
and it can be removed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nested VMX does not support live migration yet. Add a blocker
until that is worked out.
Nested SVM only does not support it, but unfortunately it is
enabled by default for -cpu host so we cannot really disable it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When writing to guest's MSR_IA32_ARCH_CAPABILITIES, check whether it's
supported in the guest using the KVM_GET_MSR_INDEX_LIST ioctl.
Fixes: d86f963694
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Tested-by: balducci@units.it
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-Id: <jpg4lc4iiav.fsf_-_@linux.bootlegged.copy>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Adds a new CPU flag to enable the Enlightened VMCS KVM feature.
QEMU enables KVM_CAP_HYPERV_ENLIGHTENED_VMCS and gets back the
version to be advertised in lower 16 bits of CPUID.0x4000000A:EAX.
Suggested-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20181022165506.30332-3-vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Note RSBA is specially treated -- no matter host support it or not, qemu
pretends it is supported.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1539578845-37944-4-git-send-email-robert.hu@linux.intel.com>
[ehabkost: removed automatic enabling of RSBA]
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add kvm_get_supported_feature_msrs() to get supported MSR feature index list.
Add kvm_arch_get_supported_msr_feature() to get each MSR features value.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1539578845-37944-2-git-send-email-robert.hu@linux.intel.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When migrate_add_blocker failed, the invtsc_mig_blocker is not
appended so no need to remove. This can save several instructions.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20181006091816.7659-1-liq3ea@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain configurations do not allow SynIC to be used in QEMU. In
particular,
- when hyperv_vpindex is off, SINT routes can't be used as they refer to
the destination vCPU by vp_index
- older KVM (which doesn't expose KVM_CAP_HYPERV_SYNIC2) zeroes out
SynIC message and event pages on every msr load, breaking migration
OTOH in-KVM users of SynIC -- SynIC timers -- do work in those
configurations, and we shouldn't stop the guest from using them.
To cover both scenarios, introduce an X86CPU property that makes CPU
init code to skip creation of the SynIC object (and thus disables any
SynIC use in QEMU) but keeps the KVM part of the SynIC working.
The property is clear by default but is set via compat logic for older
machine types.
As a result, when hv_synic and a modern machine type are specified, QEMU
will refuse to run unless vp_index is on and the kernel is recent
enough. OTOH with an older machine type QEMU will run fine with
hv_synic=on against an older kernel and/or without vp_index enabled but
will disallow the in-QEMU uses of SynIC (in e.g. VMBus).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make Hyper-V SynIC a device which is attached as a child to a CPU. For
now it only makes SynIC visibile in the qom hierarchy, and maintains its
internal fields in sync with the respecitve msrs of the parent cpu (the
fields will be used in followup patches).
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Put a bit more consistency into handling KVM_CAP_HYPERV_SYNIC capability,
by checking its availability and determining the feasibility of hv-synic
property first, and enabling it later.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082217.29481-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A significant part of hyperv.c is not actually tied to x86, and can
be moved to hw/.
This will allow to maintain most of Hyper-V and VMBus
target-independent, and to avoid conflicts with inclusion of
arch-specific headers down the road in VMBus implementation.
Also this stuff can now be opt-out with CONFIG_HYPERV.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V PV IPI support is merged to KVM, enable the feature in Qemu. When
enabled, this allows Windows guests to send IPIs to other vCPUs with a
single hypercall even when there are >64 vCPUs in the request.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20181009130853.6412-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The exception.pad field is going to be renamed to pending in an upcoming
header file update. Remove the unnecessary initialization; it was
introduced to please valgrind (commit 7e680753cf) but they were later
rendered unnecessary by commit 076796f8fd, which added the "= {}"
initializer to the declaration of "events". Therefore the patch does
not change behavior in any way.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While at it, also rename var to indicate it is not used only in KVM.
Reviewed-by: Nikita Leshchenko <nikita.leshchenko@oracle.com>
Reviewed-by: Patrick Colp <patrick.colp@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20180914003827.124570-2-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The AMD IOMMU does not (yet) support interrupt remapping. But
kvm_arch_fixup_msi_route assumes that all implementations do and crashes
when the AMD IOMMU is used in KVM mode.
Fixes: 8b5ed7dffa ("intel_iommu: add support for split irqchip")
Reported-by: Christopher Goldsworthy <christopher.goldsworthy@outlook.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Message-Id: <48ae78d8-58ec-8813-8680-6f407ea46041@siemens.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The capability macros are always defined, since they come from kernel
headers that are copied into the QEMU tree. Remove the unnecessary #ifdefs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V identifies vCPUs by Virtual Processor (VP) index which can be
queried by the guest via HV_X64_MSR_VP_INDEX msr. It is defined by the
spec as a sequential number which can't exceed the maximum number of
vCPUs per VM.
It has to be owned by QEMU in order to preserve it across migration.
However, the initial implementation in KVM didn't allow to set this
msr, and KVM used its own notion of VP index. Fortunately, the way
vCPUs are created in QEMU/KVM makes it likely that the KVM value is
equal to QEMU cpu_index.
So choose cpu_index as the value for vp_index, and push that to KVM on
kernels that support setting the msr. On older ones that don't, query
the kernel value and assert that it's in sync with QEMU.
Besides, since handling errors from vCPU init at hotplug time is
impossible, disable vCPU hotplug.
This patch also introduces accessor functions to encapsulate the mapping
between a vCPU and its vp_index.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180702134156.13404-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add support for Hyper-V TLB flush which recently got added to KVM.
Just like regular Hyper-V we announce HV_EX_PROCESSOR_MASKS_RECOMMENDED
regardless of how many vCPUs we have. Windows is 'smart' and uses less
expensive non-EX Hypercall whenever possible (when it wants to flush TLB
for all vCPUs or the maximum vCPU index in the vCPU set requires flushing
is less than 64).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20180610184927.19309-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When guest CPU PM is enabled, and with -cpu host, expose the host CPU
MWAIT leaf in the CPUID so guest can make good PM decisions.
Note: the result is 100% CPU utilization reported by host as host
no longer knows that the CPU is halted.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180622192148.178309-3-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this flag, kvm allows guest to control host CPU power state. This
increases latency for other processes using same host CPU in an
unpredictable way, but if decreases idle entry/exit times for the
running VCPU, so to use it QEMU needs a hint about whether host CPU is
overcommitted, hence the flag name.
Follow-up patches will expose this capability to guest
(using mwait leaf).
Based on a patch by Wanpeng Li <kernellwp@gmail.com> .
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20180622192148.178309-2-mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Determining the size of a field is useful when you don't have a struct
variable handy. Open-coding this is ugly.
This patch adds the sizeof_field() macro, which is similar to
typeof_field(). Existing instances are updated to use the macro.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20180614164431.29305-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Enabling TOPOEXT feature might cause compatibility issues if
older kernels does not set this feature. Lets set this feature
unconditionally.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <1528939107-17193-2-git-send-email-babu.moger@amd.com>
[ehabkost: rewrite comment and commit message]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add information for cpuid 0x8000001D leaf. Populate cache topology information
for different cache types (Data Cache, Instruction Cache, L2 and L3) supported
by 0x8000001D leaf. Please refer to the Processor Programming Reference (PPR)
for AMD Family 17h Model for more details.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <1527176614-26271-3-git-send-email-babu.moger@amd.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now we've updated our copy of the kernel headers we can remove the
compatibility shim that handled KVM_HINTS_REALTIME not being defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180525132755.21839-7-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In kernel header commit 633711e8287, the define KVM_HINTS_DEDICATED
was renamed to KVM_HINTS_REALTIME. Work around this compatibility
break by (a) using the new constant name, and (b) defining it
if the headers don't.
Part (b) can be removed once we've updated our copy of the kernel
headers to a version that defines KVM_HINTS_REALTIME.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180525132755.21839-5-peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Switch to the header we imported from Linux,
this allows us to drop a hack in kvm_i386.h.
More code will be dropped in the next patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
"Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD). To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f. With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.
Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present." (from x86/speculation: Add virtualized
speculative store bypass disable support in Linux).
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180521215424.13520-4-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM recently gained support for Hyper-V Reenlightenment MSRs which are
required to make KVM-on-Hyper-V enable TSC page clocksource to its guests
when INVTSC is not passed to it (and it is not passed by default in Qemu
as it effectively blocks migration).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20180411115036.31832-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to guarantee compatibility on migration, QEMU should have
complete control over the features it announces to the guest via CPUID.
However, for a number of Hyper-V-related cpu properties, if the
corresponding feature is not supported by the underlying KVM, the
propery is silently ignored and the feature is not announced to the
guest.
Refuse to start with an error instead.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20180330170209.20627-3-rkagan@virtuozzo.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to guarantee compatibility on migration, QEMU should have
complete control over the features it announces to the guest via CPUID.
However, the availability of Hyper-V frequency MSRs
(HV_X64_MSR_TSC_FREQUENCY and HV_X64_MSR_APIC_FREQUENCY) depends solely
on the support for them in the underlying KVM.
Introduce "hv-frequencies" cpu property (off by default) which gives
QEMU full control over whether these MSRs are announced.
While at this, drop the redundant check of the cpu tsc frequency, and
decouple this feature from hv-time.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20180330170209.20627-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Update kernel headers (Gerd, myself)
* SEV support (Brijesh)
I have not tested non-x86 compilation, but I reordered the SEV patches
so that all non-x86-specific changes go first to catch any possible
issues (which weren't there anyway :)).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJap/4yAAoJEL/70l94x66DmPoH/igfzYkxFyIHFqzb/hQEut3e
IJA05u9DBSqqdSvL0UeLdUgyJTeDM3S5kKZqZ38BPHIudwOGtydoIM2utWtPSejf
Z+mS77+dSgchEMgf1gxmD0oZ5TrO/2pdOYfaZZuQuGmGLruKsDgz6vH3F87cfk8b
yJSJkoZkFc8C9SpwQERWYuhXn2fYFxSBFgEMc9xSFN+zqQUFqeIfOJhwZ+txjAUl
y1EKlhhVyjkxTLR++SkzhKIJ8D5cycpcY/H19gw3ghHviY/tGwNLot3bLRPbwCM6
QvrXDf4rhvFHTmmOfliCI5y6Xgj0u7IZv2fVoKXEtKk1qyfyD4ZnouYTaqP/U9I=
=Q4/y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream-sev' into staging
* Migrate MSR_SMI_COUNT (Liran)
* Update kernel headers (Gerd, myself)
* SEV support (Brijesh)
I have not tested non-x86 compilation, but I reordered the SEV patches
so that all non-x86-specific changes go first to catch any possible
issues (which weren't there anyway :)).
# gpg: Signature made Tue 13 Mar 2018 16:37:06 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream-sev: (22 commits)
sev/i386: add sev_get_capabilities()
sev/i386: qmp: add query-sev-capabilities command
sev/i386: qmp: add query-sev-launch-measure command
sev/i386: hmp: add 'info sev' command
cpu/i386: populate CPUID 0x8000_001F when SEV is active
sev/i386: add migration blocker
sev/i386: finalize the SEV guest launch flow
sev/i386: add support to LAUNCH_MEASURE command
target/i386: encrypt bios rom
sev/i386: add command to encrypt guest memory region
sev/i386: add command to create launch memory encryption context
sev/i386: register the guest memory range which may contain encrypted data
sev/i386: add command to initialize the memory encryption context
include: add psp-sev.h header file
sev/i386: qmp: add query-sev command
target/i386: add Secure Encrypted Virtualization (SEV) object
kvm: introduce memory encryption APIs
kvm: add memory encryption context
docs: add AMD Secure Encrypted Virtualization (SEV)
machine: add memory-encryption option
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This MSR returns the number of #SMIs that occurred on
CPU since boot.
KVM commit 52797bf9a875 ("KVM: x86: Add emulation of MSR_SMI_COUNT")
introduced support for emulating this MSR.
This commit adds support for QEMU to save/load this
MSR for migration purposes.
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add Intel Processor Trace related definition. It also add
corresponding part to kvm_get/set_msr and vmstate.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1520182116-16485-2-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Expose Intel Processor Trace feature to guest.
To make Intel PT live migration safe and get same CPUID information
with same CPU model on diffrent host. CPUID[14] is constant in this
patch. Intel PT use EPT is first supported in IceLake, the CPUID[14]
get on this machine as default value. Intel PT would be disabled
if any machine don't support this minial feature list.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Luwei Kang <luwei.kang@intel.com>
Message-Id: <1520182116-16485-1-git-send-email-luwei.kang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Add KVM_HINTS_DEDICATED performance hint, guest checks this feature bit
to determine if they run on dedicated vCPUs, allowing optimizations such
as usage of qspinlocks.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1518185725-69559-1-git-send-email-wanpengli@tencent.com>
[ehabkost: Renamed property to kvm-hint-dedicated]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
entry is moved from list but is not freed.
Signed-off-by: linzhecheng <linzhecheng@huawei.com>
Message-Id: <20171225024704.19540-1-linzhecheng@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will share the same code for hax/kvm.
Signed-off-by: Tao Wu <lepton@google.com>
Message-Id: <20180110195056.85403-1-lepton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Certain PMU-related MSRs are not supported for CPUs with PMU
architecture below version 2. KVM rejects any access to them (see
intel_is_valid_msr_idx routine in KVM), and QEMU fails on the following
assertion:
kvm_put_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.
QEMU also could fail if KVM exposes less fixed counters then 3. It could
happen if host system run inside another hypervisor, which is tweaking
PMU-related CPUID. To prevent possible fail, number of fixed counters now is
obtained in the same way as number of GP counters.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Jan Dakinevich <jan.dakinevich@virtuozzo.com>
Message-Id: <1514383466-7257-1-git-send-email-jan.dakinevich@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch refactors the event-injection code for hvf by using the
appropriate fields already provided by CPUX86State. At vmexit, it fills
these fields so that hvf_inject_interrupts can just retrieve them without
calling into hvf.
Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com>
Message-Id: <20170913090522.4022-14-Sergio.G.DelReal@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The value of HV_X64_MSR_SVERSION is initialized once at vcpu init, and
is reset to zero on vcpu reset, which is wrong.
It is supposed to be a constant, so drop the field from X86CPU, set the
msr with the constant value, and don't bother getting it.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20171122181418.14180-4-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initially SINTx msrs should be in "masked" state. To ensure that
happens on *every* reset, move setting their values to
kvm_arch_vcpu_reset.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20171122181418.14180-3-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hyper-V has a notion of partition-wide MSRs. Those MSRs are read and
written as usual on each VCPU, however the hypervisor maintains a single
global value for all VCPUs. Thus writing such an MSR from any single
VCPU affects the global value that is read by all other VCPUs.
This leads to an issue during VCPU hotplug: the zero-initialzied values
of those MSRs get synced into KVM and override the global values as has
already been set by the guest.
This change makes the partition-wide MSRs only be synchronized on the
first vcpu.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20171122181418.14180-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c
I have trivially grepped the tree for ';;' in C files.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The definitions for Hyper-V emulation are currently taken from a header
imported from the Linux kernel.
However, as these describe a third-party protocol rather than a kernel
API, it probably wasn't a good idea to publish it in the kernel uapi.
This patch introduces a header that provides all the necessary
definitions, superseding the one coming from the kernel.
The new header supports (temporary) coexistence with the kernel one.
The constants explicitly named in the Hyper-V specification (e.g. msr
numbers) are defined in a non-conflicting way. Other constants and
types have got new names.
While at this, the protocol data structures are defined in a more
conventional way, without bitfields, enums, and excessive unions.
The code using this stuff is adjusted, too; it can now be built both
with and without the kernel header in the tree.
Signed-off-by: Roman Kagan <rkagan@virtuozzo.com>
Message-Id: <20170713201522.13765-2-rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Starting with Windows Server 2012 and Windows 8, if
CPUID.40000005.EAX contains a value of -1, Windows assumes specific
limit to the number of VPs. In this case, Windows Server 2012
guest VMs may use more than 64 VPs, up to the maximum supported
number of processors applicable to the specific Windows
version being used.
https://docs.microsoft.com/en-us/virtualization/hyper-v-on-windows/reference/tlfs
For compatibility, Let's introduce a new property for X86CPU,
named "x-hv-max-vps" as Eduardo's suggestion, and set it
to 0x40 before machine 2.10.
(The "x-" prefix indicates that the property is not supposed to
be a stable user interface.)
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <1505143227-14324-1-git-send-email-arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As of kernel commit eb82feea59d6 ("KVM: hyperv: support HV_X64_MSR_TSC_FREQUENCY
and HV_X64_MSR_APIC_FREQUENCY"), KVM supports two new MSRs which are required
for nested Hyper-V to read timestamps with RDTSC + TSC page.
This commit makes QEMU advertise the MSRs with CPUID.40000003H:EAX[11] and
CPUID.40000003H:EDX[8] as specified in the Hyper-V TLFS and experimentally
verified on a Hyper-V host. The feature is enabled with the existing hv-time CPU
flag, and only if the TSC frequency is stable across migrations and known.
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170807085703.32267-5-lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
