Commit Graph

53 Commits

Author SHA1 Message Date
Anton Nefedov
1a29cc8f5e serial: chardev hotswap support
This allows to change the port's backend runtime, e.g. change it from
file to a socket making it possible to establish a debug session with
WinDbg

> qemu-system [..] -chardev file,id=charchannel2,path=/tmp/charchannel2 \
  -device isa-serial,chardev=charchannel2,id=channel2

QEMU 2.9.50 monitor - type 'help' for more information
(qemu) chardev-change charchannel2 \
  socket,host=127.0.0.1,port=4242,server,nowait

For a backend change, a number of ioctls has to be replayed to sync
the current setup of a frontend to a backend tty. This is hopefully
enough so we don't have to track, store and replay the whole original
control byte sequence.

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <1499342940-56739-14-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 11:04:34 +02:00
Anton Nefedov
757358425e serial: move TIOCM update to a separate function
will be used by the following patch

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-13-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 11:04:34 +02:00
Anton Nefedov
3065070153 char: avoid chardevice direct access
frontends should avoid accessing CharDriver struct where possible

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-6-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 11:04:33 +02:00
Anton Nefedov
81517ba37a char: add backend hotswap handler
Frontends should have an interface to setup the handler of a backend change.
The interface will be used in the next commits

Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1499342940-56739-3-git-send-email-anton.nefedov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-14 11:04:33 +02:00
Marc-André Lureau
1ce2610c10 char: make chr_fe_deinit() optionaly delete backend
This simplifies removing a backend for a frontend user (no need to
retrieve the associated driver and separate delete call etc).

NB: many frontends have questionable handling of ending a chardev. They
should probably delete the backend to prevent broken reusage.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:53 +04:00
Marc-André Lureau
7566c6efe7 chardev: serial & parallel declaration to own headers
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Marc-André Lureau
8228e353d8 chardev: move headers to include/chardev
So they are all in one place. The following patch will move serial &
parallel declarations to the respective headers.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-02 11:33:52 +04:00
Marc-André Lureau
0ec7b3e7f2 char: rename CharDriverState Chardev
Pick a uniform chardev type name.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27 18:07:59 +01:00
Li Qiang
8409dc884a serial: fix memory leak in serial exit
The serial_exit_core function doesn't free some resources.
This can lead memory leak when hotplug and unplug. This
patch avoid this.

Signed-off-by: Li Qiang <liqiang6-s@360.cn>
Message-Id: <586cb5ab.f31d9d0a.38ac3.acf2@mx.google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16 17:52:35 +01:00
Marc-André Lureau
39ab61c6d0 char: remove explicit_fe_open, use a set_handlers argument
No need to keep explicit_fe_open around if it affects only a
qemu_chr_fe_set_handlers(). Use an additional argument instead.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-24-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:46:10 +02:00
Marc-André Lureau
c39860e6dc char: replace qemu_chr_claim/release with qemu_chr_fe_init/deinit
Now that all front end use qemu_chr_fe_init(), we can move chardev
claiming in init(), and add a function deinit() to release the chardev
and cleanup handlers.

The qemu_chr_fe_claim_no_fail() for property are gone, since the
property will raise an error instead. In other cases, where there is
already an error path, an error is raised instead. Finally, other cases
are handled by &error_abort in qemu_chr_fe_init().

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-19-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau
5345fdb446 char: use qemu_chr_fe* functions with CharBackend argument
This also switches from qemu_chr_add_handlers() to
qemu_chr_fe_set_handlers(). Note that qemu_chr_fe_set_handlers() now
takes the focus when fe_open (qemu_chr_add_handlers() did take the
focus)

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-16-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:21 +02:00
Marc-André Lureau
7fa47e2a80 char: rename some frontend functions
qemu_chr_accept_input() and qemu_chr_disconnect() are only used by
frontend, so use qemu_chr_fe prefix.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-14-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Marc-André Lureau
becdfa00cf char: replace PROP_CHR with CharBackend
Store the property in a CharBackend instead of CharDriverState*.  This
also replace systematically chr by chr.chr to access the
CharDriverState*. The following patches will replace it with calls to
qemu_chr_fe CharBackend functions.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161022095318.17775-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:20 +02:00
Prasad J Pandit
3592fe0c91 char: serial: check divider value against baud base
16550A UART device uses an oscillator to generate frequencies
(baud base), which decide communication speed. This speed could
be changed by dividing it by a divider. If the divider is
greater than the baud base, speed is set to zero, leading to a
divide by zero error. Add check to avoid it.

Reported-by: Huawei PSIRT <psirt@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1476251888-20238-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-24 15:27:19 +02:00
Paolo Bonzini
9f34a35e00 serial: reinstate watch after migration
Otherwise, a serial port can get stuck if it is migrated while flow control
is in effect.

Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
Paolo Bonzini
a1df76da57 serial: remove watch on reset
Otherwise, this can cause serial_xmit to be entered with LSR.TEMT=0,
which is invalid and causes an assertion failure.

Reported-by: Bret Ketchum <bcketchum@gmail.com>
Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
Paolo Bonzini
b0585e7e07 serial: separate serial_xmit and serial_watch_cb
serial_xmit starts transmission of whatever is in the transmitter
register, THR or FIFO; serial_watch_cb is a wrapper around it and is
only used as a qemu_chr_fe_add_watch callback.

Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
Paolo Bonzini
bce933b85a serial: simplify tsr_retry reset
Move common code outside the if, and reset tsr_retry even in loopback mode.
Right now it cannot become non-zero, but it will be possible as soon as
we start respecting the baud rate.

Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
Paolo Bonzini
807464d8a7 serial: make tsr_retry unsigned
It can never become negative; reflect this in the type of the field
and simplify the conditions.

Tested-by: Bret Ketchum <bcketchum@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29 14:03:47 +02:00
Rutuja Shah
73bcb24d93 Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed.  This replacement improves the readability and
understandability of code.

For example,

    timer_mod(fdctrl->result_timer,
	      qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));

NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.

Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:17 +01:00
Markus Armbruster
da34e65cb4 include/qemu/osdep.h: Don't include qapi/error.h
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef.  Since then, we've moved to include qemu/osdep.h
everywhere.  Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h.  That's in excess of
100KiB of crap most .c files don't actually need.

Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h.  Include qapi/error.h in .c files that need it and don't
get it now.  Include qapi-types.h in qom/object.h for uint16List.

Update scripts/clean-includes accordingly.  Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h.  Update the list of includes in the qemu/osdep.h
comment quoted above similarly.

This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third.  Unfortunately, the number depending on
qapi-types.h shrinks only a little.  More work is needed for that one.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22 22:20:15 +01:00
Peter Maydell
b6a0aa0537 x86: Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-29 15:07:22 +00:00
Markus Armbruster
007b06578a Use error_fatal to simplify obvious fatal errors
Done with this Coccinelle semantic patch:

    @@
    type T;
    identifier FUN, RET;
    expression list ARGS;
    expression ERR, EC;
    @@
    (
    -    T RET = FUN(ARGS, &ERR);
    +    T RET = FUN(ARGS, &error_fatal);
    |
    -    RET = FUN(ARGS, &ERR);
    +    RET = FUN(ARGS, &error_fatal);
    |
    -    FUN(ARGS, &ERR);
    +    FUN(ARGS, &error_fatal);
    )
    -    if (ERR != NULL) {
    -        error_report_err(ERR);
    -        exit(EC);
    -    }

This is actually a more elegant version of my initial semantic patch
by courtesy of Eduardo.

It leaves dead Error * variables behind, cleaned up manually.

Cc: qemu-arm@nongnu.org
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2016-01-13 11:58:58 +01:00
Juan Quintela
5cd8cadae8 migration: Use normal VMStateDescriptions for Subsections
We create optional sections with this patch.  But we already have
optional subsections.  Instead of having two mechanism that do the
same, we can just generalize it.

For subsections we just change:

- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
  it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
  VMStateDescription

Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-12 06:53:57 +02:00
Markus Armbruster
565f65d271 error: Use error_report_err() where appropriate
Coccinelle semantic patch:

    @@
    expression E;
    @@
    -    error_report("%s", error_get_pretty(E));
    -    error_free(E);
    +    error_report_err(E);
    @@
    expression E, S;
    @@
    -    error_report("%s", error_get_pretty(E));
    +    error_report_err(E);
    (
         exit(S);
    |
         abort();
    )

Trivial manual touch-ups in block/sheepdog.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-18 10:51:09 +01:00
Stefan Weil
92013cf8ca serial: Fix warnings caused by missing 'static' attribute
Warnings from the Sparse static analysis tool:

hw/char/serial.c:630:26: warning: symbol
 'vmstate_serial_thr_ipending' was not declared. Should it be static?
hw/char/serial.c:646:26: warning: symbol
 'vmstate_serial_tsr' was not declared. Should it be static?
hw/char/serial.c:665:26: warning: symbol
 'vmstate_serial_recv_fifo' was not declared. Should it be static?
hw/char/serial.c:681:26: warning: symbol
 'vmstate_serial_xmit_fifo' was not declared. Should it be static?
hw/char/serial.c:697:26: warning: symbol
 'vmstate_serial_fifo_timeout_timer' was not declared. Should it be static?
hw/char/serial.c:713:26: warning: symbol
 'vmstate_serial_timeout_ipending' was not declared. Should it be static?
hw/char/serial.c:729:26: warning: symbol
 'vmstate_serial_poll' was not declared. Should it be static?

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-10 10:26:05 +03:00
Paolo Bonzini
e720677e32 vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR
variants.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-26 12:22:44 +01:00
Paolo Bonzini
bfa7362889 serial: refine serial_thr_ipending_needed
If the THR interrupt is disabled, there is no need to migrate thr_ipending
because LSR.THRE will be sampled again when the interrupt is enabled.
(This is the behavior that is not documented in the datasheet, but
relied on by Windows!)

Note that in this case IIR will never be 0x2 so, if thr_ipending were
to be one, QEMU would produce the subsection.

Reported-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03 09:22:12 +01:00
Paolo Bonzini
1645b8eee5 serial: only resample THR interrupt on rising edge of IER.THRI
There is disagreement on whether LSR.THRE should be resampled when
IER.THRI goes from 1 to 1.  Bochs only does it if IER.THRI goes from 0
to 1; PCE does it even if IER.THRI is unchanged.  But the Windows driver
seems to always go from 1 to 0 and back to 1, so do things in agreement
with Bochs, because the handling of thr_ipending was reported in 2010
(https://lists.gnu.org/archive/html/qemu-devel/2010-03/msg01914.html)
as breaking DR-DOS Plus.

Reported-by: Roy Tam <roytam@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 17:34:42 +01:00
Paolo Bonzini
023c3a9707 serial: update LSR on enabling/disabling FIFOs
When the transmit FIFO is emptied or enabled, the transmitter
hold register is empty.  When it is disabled, it is also emptied and
in addition the previous contents of the transmitter hold register
are discarded.  In either case, the THRE bit in LSR must be set and
THRI raised.

When the receive FIFO is emptied or enabled, the data ready and break
bits must be cleared in LSR.  Likewise when the receive FIFO is disabled.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 17:34:05 +01:00
Paolo Bonzini
0d931d7062 serial: clean up THRE/TEMT handling
- assert TEMT is cleared before sending a character; we'll get one from
TSR if tsr_retry > 0, from the FIFO or THR otherwise

- assert THRE cleared and FIFO not empty (if enabled) before fetching a
character to send.  This effectively reverts dffacd46, but the check
makes no sense and commit f702e62 (serial: change retry logic to avoid
concurrency, 2014-07-11) must have made it unnecessary.  The commit
message for f702e62 talks about multiple calls to qemu_chr_fe_add_watch
triggering s->tsr_retry >= MAX_XMIT_RETRY, but other failures were
possible.  For example, if you have multiple calls, the subsequent ones
will see s->tsr_retry == 0 and will find THRE and/or TEMT on entry.

- for clarity, raise THRI immediately after the code sets THRE

- check THRE to see if another character has to be sent.  This makes
the assertions more obvious and also means TEMT has to be set as soon as
the loop ends.  It makes the loop send both TSR and THR if flow-control
happens in non-FIFO mode.  Previously, THR would be lost.

- clear TEMT together with THRE even in the non-FIFO case

The last two items are bugfixes, but they were just found by inspection
and do not squash known bugs.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 17:33:37 +01:00
Paolo Bonzini
4e02b0fcf5 serial: reset thri_pending on IER writes with THRI=0
This is responsible for failure of migration from 2.2 to 2.1, because
thr_ipending is always one in practice.

serial.c is setting thr_ipending unconditionally.  However, thr_ipending
is not used at all if THRI=0, and it will be overwritten again the next
time THRE or THRI changes.  For that reason, we can set thr_ipending to
zero every time THRI is reset.

There is disagreement on whether LSR.THRE should be resampled when IER.THRI
goes from 1 to 1.  This patch does not touch the code, leaving that for
QEMU 2.3+.

This has no semantic change and is enough to fix migration in the common
case where the interrupt is not pending or is reported in IIR.  It does not
change the migration format, so 2.2.0 -> 2.1 will remain broken but we
can fix 2.2.1 -> 2.1 without breaking 2.2.1 <-> 2.2.0.

The case that remains broken (the one in which the subsection is strictly
necessary) is when THRE=1, the THRI interrupt has *not* been acknowledged
yet, and a higher-priority interrupt comes.  In this case, you need the
subsection to tell the source that the lower-priority THRI interrupt is
pending.  The subsection's breakage of migration, in this case, prevents
continuing the VM on the destination with an invalid state.

Cc: qemu-stable@nongnu.org
Reported-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15 14:35:53 +01:00
Paolo Bonzini
a30cf8760f serial: check if backed by a physical serial port at realize time
Right now, s->poll_msl may linger at "0" value for an arbitrarily long
time, until serial_update_msl is called for the first time.  This is
unnecessary, and will lead to the s->poll_msl field being unnecessarily
migrated.

We can call serial_update_msl immediately at realize time (via
serial_reset) and be done with it.  The memory-mapped UART was already
doing that, but not the ISA and PCI variants.

Regarding the delta bits, be consistent with what serial_reset does when
the serial port is not backed by a physical serial port, and always clear
them at reset time.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-19 10:50:07 +02:00
Paolo Bonzini
4df7961faa serial: reset state at startup
When a serial port is started, its initial state is all zero.  Make
it consistent with reset state instead.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-19 10:50:07 +02:00
Pavel Dovgalyuk
7385b275d9 serial: fixing vmstate for save/restore
Some fields were added to VMState by this patch to preserve correct
loading of the serial port controller state.
Updating FCR value while loading was also modified to disable generating
an interrupt by loadvm.

Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-11 12:20:32 +02:00
Kirill Batuzov
f702e62a19 serial: change retry logic to avoid concurrency
Whenever serial_xmit fails to transmit a byte it adds a watch that would
call it again when the "line" becomes ready. This results in a retry
chain:
  serial_xmit -> add_watch -> serial_xmit
Each chain is able to transmit one character, and for every character
passed to serial by the guest driver a new chain is spawned.

The problem lays with the fact that a new chain is spawned even when
there is one already waiting on the watch. So there can be several retry
chains waiting concurrently on one "line". Every chain tries to transmit
current character, so character order is not messed up. But also every
chain increases retry counter (tsr_retry). If there are enough
concurrent chains this counter will hit MAX_XMIT_RETRY value and
the character will be dropped.

To reproduce this bug you need to feed serial output to some program
consuming it slowly enough. A python script from bug #1335444
description is an example of such program.

This commit changes retry logic in the following way to avoid
concurrency: instead of spawning a new chain for each character being
transmitted spawn only one and make it transmit characters until FIFO is
empty.

The change consists of two parts:
 - add a do {} while () loop in serial_xmit (diff is a bit erratic
   for this part, diff -w will show actual change),
 - do not call serial_xmit from serial_ioport_write if there is one
   waiting on the watch already.

This should fix another issue causing bug #1335444.

Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-14 16:14:14 +02:00
Roger Pau Monne
e02bc6de30 serial: poll the serial console with G_IO_HUP
On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:

http://xenbits.xen.org/people/royger/test_poll.c

When executed on Linux:

$ ./test_poll
In callback

On FreeBSD instead, the callback never gets called:

$ ./test_poll

So, in order to workaround this, poll the source with G_IO_HUP (which
makes the code behave the same way on both Linux and FreeBSD).

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: xen-devel@lists.xenproject.org
[Add hw/char/cadence_uart.c too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-30 15:04:34 +02:00
Juan Quintela
d49805aeea savevm: Remove all the unneeded version_minimum_id_old (x86)
After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16 04:55:26 +02:00
Don Slutz
dffacd4654 char/serial: Fix emptyness handling
The commit 88c1ee73d3
char/serial: Fix emptyness check

Still causes extra NULL byte(s) to be sent.

So if the fifo is empty, do not send an extra NULL byte.

Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Message-id: 1395160174-16006-1-git-send-email-dslutz@verizon.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-07 14:51:32 +01:00
Peter Crosthwaite
88c1ee73d3 char/serial: Fix emptyness check
This was guarding against a full fifo rather than an empty fifo when
popping. Fix.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-15 16:10:25 +04:00
Anthony Liguori
f7ad538e1e Merge remote-tracking branch 'stefanha/block' into staging
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
  win32-aio: drop win32_aio_flush_cb()
  aio-win32: replace incorrect AioHandler->opaque usage with ->e
  aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
  aio / timers: Remove legacy interface
  aio / timers: Switch entire codebase to the new timer API
  aio / timers: Add scripts/switch-timer-api
  aio / timers: Add test harness for AioContext timers
  aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
  aio / timers: Convert rtc_clock to be a QEMUClockType
  aio / timers: Remove main_loop_timerlist
  aio / timers: Rearrange timer.h & make legacy functions call non-legacy
  aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
  aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
  aio / timers: Remove alarm timers
  aio / timers: Add documentation and new format calls
  aio / timers: Use all timerlists in icount warp calculations
  aio / timers: Introduce new API timer_new and friends
  aio / timers: On timer modification, qemu_notify or aio_notify
  aio / timers: Convert mainloop to use timeout
  aio / timers: Convert aio_poll to use AioContext timers' deadline
  ...

Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-08-26 09:19:50 -05:00
Alex Bligh
bc72ad6754 aio / timers: Switch entire codebase to the new timer API
This is an autogenerated patch using scripts/switch-timer-api.

Switch the entire code base to using the new timer API.

Note this patch may introduce some line length issues.

Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22 19:14:24 +02:00
Seiji Aguchi
4a44d85e28 Convert stderr message calling error_get_pretty() to error_report()
Convert stderr messages calling error_get_pretty()
to error_report().

Timestamp is prepended by -msg timstamp option with it.

Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().

http://marc.info/?l=qemu-devel&m=137513283408601&w=2

But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.

So, it should be done step by step with avoiding regression.

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-20 11:51:59 -04:00
Paolo Bonzini
2c9b15cab1 memory: add owner argument to initialization functions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04 17:42:44 +02:00
Vladimir Senkov
b165b0d8e6 char/serial: fix copy&paste error (fifo8_is_full vs empty)
Copy&paste error in serial.c causes a crash when attempting
to read from UART (if there is no data to be read)

Signed-off-by: Vladimir Senkov <hangup@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-17 12:57:50 +04:00
Blue Swirl
371a775dc1 Merge branch 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
  qdev: Drop FROM_QBUS() macro
  isa: QOM'ify ISADevice
  isa: QOM'ify ISABus
  i8259: Convert PICCommonState to use QOM realizefn
  kvm/i8259: QOM'ify some more
  i8259: QOM'ify some more
  i8254: Convert PITCommonState to QOM realizefn
  kvm/i8254: QOM'ify some more
  i8254: QOM'ify some more
  isa: Use realizefn for ISADevice
  cs4231a: QOM'ify some more
  gus: QOM'ify some more
2013-06-15 10:53:44 +00:00
Peter Crosthwaite
b5601df762 char/serial: serial_ioport_write: Factor out common code
These three lines are common to both FIFO and regular mode. Just factor
them out to outside the if rather than replicate the same lines inside
both if and else.

Cc: qemu-trivial@nongnu.org

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-11 23:45:44 +04:00
Peter Crosthwaite
8e8638fa87 char/serial: Use generic Fifo8
Use the generic Fifo8 helper provided by QEMU, rather than re-implement
privately.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-11 23:45:44 +04:00
Peter Crosthwaite
7f4f0a227f char/serial: cosmetic fixes.
Some cosmetic fixes to char/serial fixing some checkpatch errors.

Cc: qemu-trivial@nongnu.org

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-11 23:45:44 +04:00