This adds the AHB and APB plug and play devices.
They are scanned during the linux boot to discover the various peripheral.
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Step in to maintain it, since I have some familiarity with
the technology.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fixes might still get picked up via the qemu-block mailing list,
so the status is not "Orphan" yet.
Also add the gluster mailing list as suggested by Niels here:
https://patchwork.kernel.org/patch/10613297/#22409943
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new virtio-input device, which connects to a vhost-user
backend.
Instead of reading configuration directly from an input device /
evdev (like virtio-input-host), it reads it over vhost-user protocol
with {SET,GET}_CONFIG messages. The vhost-user-backend handles the
queues & events setup.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190503130034.24916-5-marcandre.lureau@redhat.com
[ kraxel: drop -{non-,}transitional variants ]
[ kraxel: fix "make check" on !linux ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Create a vhost-user-backend object that holds a connection to a
vhost-user backend (or "slave" process) and can be referenced from
virtio devices that support it. See later patches for input & gpu
usage.
Note: a previous iteration of this object made it user-creatable, and
allowed managed sub-process spawning, but that has been dropped for
now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190503130034.24916-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
QTest has two parts: the server (-qtest) and the accelerator
(-machine accel=qtest). The accelerator depends on CONFIG_POSIX
due to its usage of sigwait(), but the server doesn't.
Move the accel code to accel/qtest.c. Later we will disable
compilation of accel/qtest.c on non-POSIX systems.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190422210448.2488-2-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: added fixup for MAINTAINERS file]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Since uWireSlave is only used in this new header, there is no
need to expose it via "qemu/typedefs.h".
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-9-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-8-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-7-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add an entries the Blizzard device in MAINTAINERS.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190412165416.7977-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=tJvv
-----END PGP SIGNATURE-----
Merge tag 's390-ccw-bios-2019-04-12' into s390-next-staging
Support for booting from a vfio-ccw passthrough dasd device
# gpg: Signature made Fri 12 Apr 2019 01:17:03 PM CEST
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
* tag 's390-ccw-bios-2019-04-12':
pc-bios/s390: Update firmware images
s390-bios: Use control unit type to find bootable devices
s390-bios: Support booting from real dasd device
s390-bios: Add channel command codes/structs needed for dasd-ipl
s390-bios: Use control unit type to determine boot method
s390-bios: Refactor virtio to run channel programs via cio
s390-bios: Factor finding boot device out of virtio code path
s390-bios: Extend find_dev() for non-virtio devices
s390-bios: cio error handling
s390-bios: Support for running format-0/1 channel programs
s390-bios: ptr2u32 and u32toptr
s390-bios: Map low core memory
s390-bios: Decouple channel i/o logic from virtio
s390-bios: Clean up cio.h
s390-bios: decouple common boot logic from virtio
s390-bios: decouple cio setup from virtio
s390 vfio-ccw: Add bootindex property and IPLB data
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
build and capture platform firmware binaries from that release. The
binaries are meant to be used by both end-users and by the "BIOS tables"
unit tests in qtest ("make check").
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=k5c2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/lersek/tags/edk2-pull-2019-04-22' into staging
Advance the roms/edk2 submodule to the "edk2-stable201903" release, and
build and capture platform firmware binaries from that release. The
binaries are meant to be used by both end-users and by the "BIOS tables"
unit tests in qtest ("make check").
# gpg: Signature made Mon 22 Apr 2019 19:20:08 BST
# gpg: using RSA key D39DA71E0D496CFA
# gpg: Good signature from "Laszlo Ersek <lersek@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F5D9 660F 1BA5 F310 A95A C5E0 466A EAE0 6125 3988
# Subkey fingerprint: B3A5 5D3F 88A8 90ED 2E63 3E8D D39D A71E 0D49 6CFA
* remotes/lersek/tags/edk2-pull-2019-04-22:
MAINTAINERS: add the "EDK2 Firmware" subsystem
Makefile: install the edk2 firmware images and their descriptors
tests: add missing dependency to build QTEST_QEMU_BINARY, round 2
pc-bios: document the edk2 firmware images; add firmware descriptors
pc-bios: add edk2 firmware binaries and variable store templates
roms: build edk2 firmware binaries and variable store templates
roms/Makefile: replace the $(EDK2_EFIROM) target with "edk2-basetools"
roms/edk2-funcs.sh: add the qemu_edk2_get_thread_count() function
roms/edk2: advance to tag edk2-stable201903
tests/uefi-test-tools/build.sh: work around TianoCore#1607
roms/edk2-funcs.sh: require gcc-4.8+ for building i386 and x86_64
roms: lift "edk2-funcs.sh" from "tests/uefi-test-tools/build.sh"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We commonly want to print to the current monitor if we have one, else
to stdout/stderr. For stderr, have error_printf(). For stdout, all
we have is monitor_vfprintf(), which is rather unwieldy. We often
print to stderr just because error_printf() is easier.
New qemu_printf() and qemu_vprintf() do exactly what's needed. The
next commits will put them to use.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-12-armbru@redhat.com>
We now have the edk2 submodule, somewhat elaborate build helpers for it,
and even a UEFI application written against edk2 whose genuine home is the
QEMU repository. Add the "EDK2 Firmware" subsystem such that all relevant
pathnames be covered.
Suggested-by: Daniel P. Berrang <berrange@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Allows guest to boot from a vfio configured real dasd device.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1554388475-18329-16-git-send-email-jjherne@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add bootindex property and iplb data for vfio-ccw devices. This allows us to
forward boot information into the bios for vfio-ccw devices.
Refactor s390_get_ccw_device() to return device type. This prevents us from
having to use messy casting logic in several places.
Signed-off-by: Jason J. Herne <jjherne@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1554388475-18329-2-git-send-email-jjherne@linux.ibm.com>
[thuth: fixed "typedef struct VFIOCCWDevice" build failure with clang]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove Alex as a Device Tree maintainer as requested by him. Add myself
as a maintainer to avoid it being orphaned. Also add David as a
Reviewer (R) as he is the libfdt and DTC maintainer.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
and declare David and myself as maintainers of the PPC PowerNV
(Non-Virtualized) machine using the OPAL (skiboot) firmware.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190313162423.22081-1-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As discussed during "[PATCH v4 00/29] vhost-user for input & GPU"
review, let's define a common set of backend conventions to help with
management layer implementation, and interoperability.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190308140454.32437-3-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
One great big block comment isn't the best way to document
the syntax of a language.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20181110211313.6922-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Original commit message:
This patch adds an emulation model for i2c controller found on most of the FSL SoCs.
It also integrates the RTC (ds1338) that sits on the i2c Bus with e500 machine model.
Patch was originally written by Amit Singh Tomar <amit.tomar@freescale.com>
see http://patchwork.ozlabs.org/patch/431475/
I only fixed it enough for application on top of current qemu master
20b084c4b1, and hopefully fixed checkpatch errors
Tested by booting Linux kernel 4.20.12. Now e500 machine doesn't need
network time protocol daemon because it will have working RTC
(before all timestamps on files were from 2016)
Signed-off-by: Amit Singh Tomar <amit.tomar@freescale.com>
Signed-off-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Message-Id: <20190306102812.28972-1-randrianasulu@gmail.com>
[dwg: Add Kconfig stanza to define the new symbol, update MAINTAINERS]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move qdict-test-data.txt to the tests/data/qobject/ subdirectory,
and remove the unnecessary symlinking.
(See 4b2ff65a1f for similar test-data cleanup).
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[thuth: Fix conflict in MAINTAINERS]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds the "S:" line for areas of the codebase that currently
lack a support status field.
Note that there are a few more areas that are more abstract and do not
correspond to a specific set of files. They have not been modified.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190301163518.20702-1-stefanha@redhat.com
Message-Id: <20190301163518.20702-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a MAINTAINERS entry for Sphinx documentation infrastructure:
this doesn't cover actual content, only the machinery we use to
build the docs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190305172139.32662-13-peter.maydell@linaro.org
This was changed a little bit since my post on Feb 20 (to which
there were no comments) due to changes I had to work around:
Change b296b664ab "smbus: Add a helper to generate SPD EEPROM
data" added a function to include/hw/i2c/smbus.h, which I had to move to
include/hw/smbus_eeprom.h.
There were some changes to hw/i2c/Makefile.objs that I had to fix up.
Beyond that, no changes.
Thanks,
-corey
-----BEGIN PGP SIGNATURE-----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=XTkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cminyard/tags/i2c-for-release-20190228' into staging
This has been out there long enough, I need to get this in.
This was changed a little bit since my post on Feb 20 (to which
there were no comments) due to changes I had to work around:
Change b296b664ab "smbus: Add a helper to generate SPD EEPROM
data" added a function to include/hw/i2c/smbus.h, which I had to move to
include/hw/smbus_eeprom.h.
There were some changes to hw/i2c/Makefile.objs that I had to fix up.
Beyond that, no changes.
Thanks,
-corey
# gpg: Signature made Thu 28 Feb 2019 18:05:49 GMT
# gpg: using RSA key FD0D5CE67CE0F59A6688268661F38C90919BFF81
# gpg: Good signature from "Corey Minyard <cminyard@mvista.com>" [unknown]
# gpg: aka "Corey Minyard <minyard@acm.org>" [unknown]
# gpg: aka "Corey Minyard <corey@minyard.net>" [unknown]
# gpg: aka "Corey Minyard <minyard@mvista.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FD0D 5CE6 7CE0 F59A 6688 2686 61F3 8C90 919B FF81
* remotes/cminyard/tags/i2c-for-release-20190228:
i2c: Verify that the count passed in to smbus_eeprom_init() is valid
i2c:smbus_eeprom: Add a reset function to smbus_eeprom
i2c:smbus_eeprom: Add vmstate handling to the smbus eeprom
i2c:smbus_eeprom: Add a size constant for the smbus_eeprom size
i2c:smbus_eeprom: Add normal type name and cast to smbus_eeprom.c
i2c:smbus_slave: Add an SMBus vmstate structure
i2c:pm_smbus: Fix state transfer
migration: Add a VMSTATE_BOOL_TEST() macro
i2c:pm_smbus: Fix pm_smbus handling of I2C block read
boards.h: Ignore migration for SMBus devices on older machines
i2c:smbus: Make white space in switch statements consistent
i2c:smbus_eeprom: Get rid of the quick command
i2c:smbus: Simplify read handling
i2c:smbus: Simplify write operation
i2c:smbus: Correct the working of quick commands
i2c: Don't check return value from i2c_recv()
arm:i2c: Don't mask return from i2c_recv()
i2c: have I2C receive operation return uint8_t
i2c: Split smbus into parts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Re-enable the guest-agent test
- Add the possibility to load a bios image on the mcf5208evb machine
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Lzgr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2019-02-28' into staging
- Updates to MAINTAINERS file
- Re-enable the guest-agent test
- Add the possibility to load a bios image on the mcf5208evb machine
# gpg: Signature made Thu 28 Feb 2019 12:23:25 GMT
# gpg: using RSA key 2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-02-28:
hw/m68k/mcf5208: Support loading of bios images
tests/test-qga: Reenable guest-agent qtest
MAINTAINERS: Clean up the RISC-V TCG backend section
MAINTAINERS: Add some missing entries for the sun4m machine
MAINTAINERS: Add maintainer to the TCG/i386 subsystem
MAINTAINERS: Add maintainers to the Linux subsystem
MAINTAINERS: Orphanize the 'GDB stub' subsystem
MAINTAINERS: Add maintainer to the POSIX subsystem
MAINTAINERS: Add an entry for the Dino machine
MAINTAINERS: Add missing test entries to the Cryptography section
MAINTAINERS: Add missing entries for the QObject section
MAINTAINERS: Add missing entries for the PC machines
MAINTAINERS: Add missing entries for the sun4u machines
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The e-mail address mjc@sifive.com of Michael is not valid anymore.
Commit 7d04ac3895 removed the entry already from the main
RISC-V section, but apparently forgot to remove it from the TCG
backend section, too.
Fixes: 7d04ac3895
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These files / devices are only used by SPARC machines, so we can sort
them into the corresponding category in the MAINTAINERS file.
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Richard obviously maintains this subdirectory, make this official :)
Remove the qemu-devel@nongnu.org entry because the list is always
selected by the 'All patches CC here' section.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add Michael, Cornelia and Paolo as maintainers of the Linux subsystem.
Remove the qemu-devel@nongnu.org entry because the list is always
selected by the 'All patches CC here' section.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
[thuth: Add update-linux-headers.sh, too]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nobody is looking at those files, downgrade this subsystem as orphan.
Remove the qemu-devel@nongnu.org entry because the list is always
selected by the 'All patches CC here' section.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add Paolo as maintainer of the POSIX subsystem.
Remove the qemu-devel@nongnu.org entry because the list is always
selected by the 'All patches CC here' section.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add Richard as maintainer, and Helge as reviewer.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Add the machine entry alphabetically]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Implement a model of the Message Handling Unit (MHU) found in
the Arm SSE-200. This is a simple device which just contains
some registers which allow the two cores of the SSE-200
to raise interrupts on each other.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190219125808.25174-2-peter.maydell@linaro.org
smbus.c and smbus.h had device side code, master side code, and
smbus.h has some smbus_eeprom.c definitions. Split them into
separate files.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
-----BEGIN PGP SIGNATURE-----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=gaah
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Block graph change fixes (avoid loops, cope with non-tree graphs)
- bdrv_set_aio_context() related fixes
- HMP snapshot commands: Use only tag, not the ID to identify snapshots
- qmeu-img, commit: Error path fixes
- block/nvme: Build fix for gcc 9
- MAINTAINERS updates
- Fix various issues with bdrv_refresh_filename()
- Fix various iotests
- Include LUKS overhead in qemu-img measure for qcow2
- A fix for vmdk's image creation interface
# gpg: Signature made Mon 25 Feb 2019 14:18:15 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (71 commits)
iotests: Skip 211 on insufficient memory
vmdk: false positive of compat6 with hwversion not set
iotests: add LUKS payload overhead to 178 qemu-img measure test
qcow2: include LUKS payload overhead in qemu-img measure
iotests.py: s/_/-/g on keys in qmp_log()
iotests: Let 045 be run concurrently
iotests: Filter SSH paths
iotests.py: Filter filename in any string value
iotests.py: Add is_str()
iotests: Fix 207 to use QMP filters for qmp_log
iotests: Fix 232 for LUKS
iotests: Remove superfluous rm from 232
iotests: Fix 237 for Python 2.x
iotests: Re-add filename filters
iotests: Test json:{} filenames of internal BDSs
block: BDS options may lack the "driver" option
block/null: Generate filename even with latency-ns
block/curl: Implement bdrv_refresh_filename()
block/curl: Harmonize option defaults
block/nvme: Fix bdrv_refresh_filename()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a QAuthZList object type that implements the QAuthZ interface. This
built-in implementation maintains a trivial access control list with a
sequence of match rules and a final default policy. This replicates the
functionality currently provided by the qemu_acl module.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list",
"id": "authz0",
"props": {
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
}
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
It is not currently possible to create this via -object, since there is
no syntax supported to specify non-scalar properties for objects. This
is likely to be addressed by later support for using JSON with -object,
or an equivalent approach.
In any case the future "authz-listfile" object can be used from the
CLI and is likely a better choice, as it allows the ACL to be refreshed
automatically on change.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current qemu_acl module provides a simple access control list
facility inside QEMU, which is used via a set of monitor commands
acl_show, acl_policy, acl_add, acl_remove & acl_reset.
Note there is no ability to create ACLs - the network services (eg VNC
server) were expected to create ACLs that they want to check.
There is also no way to define ACLs on the command line, nor potentially
integrate with external authorization systems like polkit, pam, ldap
lookup, etc.
The QAuthZ object defines a minimal abstract QOM class that can be
subclassed for creating different authorization providers.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
I'll not be involved in day-to-day qemu development. Remove myself as
maintainer from the remainder of the network block drivers, and revert
them to the general block layer maintainership.
Move 'sheepdog' to the 'Odd Fixes' support level.
For VHDX, added my personal email address as a maintainer, as I can
answer questions or send the occassional bug fix. Leaving it as
'Supported', instead of 'Odd Fixes', because I think the rest of the
block layer maintainers and developers will upkeep it as well, if
needed.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Message-Id: <63e205cb84c8f0a10c1bc6d5d6856d72ceb56e41.1537984851.git.jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I'll not be involved with day-to-day qemu development, and John
Snow is a block jobs wizard. Have him take over block job
maintainership duties.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <d56d7c6592e7d68aa72764e9616878394bffbc14.1537984851.git.jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is very convenient for people like me who store their QEMU git trees
on gitlab.com: Automatic CI pipelines are now run for each branch that is
pushed to the server - useful for some extra-testing before sending PULL-
requests for example. Since the runtime of the jobs is limited to 1h, the
jobs are distributed into multiple pipelines - this way everything finishs
fine within time (ca. 30 minutes currently).
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1550058881-16351-1-git-send-email-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
The Musca-A and Musca-B1 development boards are based on the
SSE-200 subsystem for embedded. Implement an initial skeleton
model of these boards, which are similar but not identical.
This commit creates the board model with the SSE and the IRQ
splitters to wire IRQs up to its two CPUs. As yet there
are no devices and no memory: these will be added later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Create a new include file for the pl031's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We are actually paid to look after this.
Message-Id: <20190213103519.32585-1-cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Peter Crosthwaite hasn't had the bandwidth to do code review or
other QEMU work for some time now -- remove his email address
from MAINTAINERS file entries so we don't bombard him with
patch emails.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190207181422.4907-1-peter.maydell@linaro.org
The scripts/archive-source.sh is used by the VM tests, it makes
sense to add it in the "Build and test automation" section.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
I've unofficially been doing most of the work on the Mac machines for a while
now, so update MAINTAINERS to reflect this. David is still happy to be listed
as a reviewer as per our discussion at KVM forum.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is currently a "e500" machine section and a "ppce500" device
section in the maintainers file - with some oddities: The wildcard
in the device section also covers the files from the machine section.
And hw/pci-host/ppce500.c is in the device section, while its header
is in the machine section.
This is really quite confusing, and I don't see a reason why we really
need two sections here, so let's simply merge them.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The "XIVE" section is currently listed in the "PowerPC Machines"
section, which is weird, since this is an interrupt controller
device. Move it to the "Devices" section instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The SSE-200 has a CPU_IDENTITY register block, which is a set of
read-only registers. As well as the usual PID/CID registers, there
is a single CPUID register which indicates whether the CPU is CPU 0
or CPU 1. Implement a model of this register block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-20-peter.maydell@linaro.org
Rename the files that used to be iotkit.[ch] to
armsse.[ch] to reflect the fact they new cover
multiple Arm subsystems for embedded.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190121185118.18550-8-peter.maydell@linaro.org
Move the complexity of milkymist_tmu2_create() into the
source file. Doing so we avoid to include the X11/OpenGL
headers in all LM32 devices, and we also avoid the duplicate
declaration of glx_fbconfig_attr[] (it is already declared
in hw/display/milkymist-tmu2.c).
Since TYPE_MILKYMIST_TMU2 is now accessible, use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-5-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
User-visible changes:
* The new qemu-trace-stap script makes it convenient to collect traces without
writing SystemTap scripts. See "man qemu-trace-stap" for details.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcURdlAAoJEJykq7OBq3PIPqAH/iSkYDDeWLQy4eqeTPpbsxd4
U6mUYC/m2g1bevj1TxdFmr2g5LReGTd4w35w6/SUaLMHsu701T7gK+0z1gP2/N/D
qzJiM9xxF6xYq1P4hWJGf+XsbJ0OVf7oRwn1j8qXVBxjIxERX98z0ZUtbk/aulGi
wnNXycBufpKGk2PkQC+pBfhU2775dMqpUV49z9mqyVzsiZQlzbx8WMDQj1Ic1fbe
ZcAvX5D350HJjB3Z+9wJ1V2pC9Gu+z3TIup+YR1Bkch0ywyTCVTqcepoOXwzQamm
84bifPdObBm7SbbwtrwoVKYLrdIrbb3PTWaOlWVUKruKIIf8hzn5BxC3wChb2Qk=
=bex6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Pull request
User-visible changes:
* The new qemu-trace-stap script makes it convenient to collect traces without
writing SystemTap scripts. See "man qemu-trace-stap" for details.
# gpg: Signature made Wed 30 Jan 2019 03:17:57 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: rerun tracetool after ./configure changes
trace: improve runstate tracing
trace: add ability to do simple printf logging via systemtap
trace: forbid use of %m in trace event format strings
trace: enforce that every trace-events file has a final newline
display: ensure qxl log_buf is a nul terminated string
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
New source files were added without corresponding ./MAINTAINERS file
entries. Let's get things up to date.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190123183352.11025-1-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcSw5lAAoJENSXKoln91pl8aEH/2KkK5ojXMBY94wH+sCZ17pM
gEuysp20pUudeIk7eUk9aCnq7NHXGJ3GElB6baBq9zwC6qMlVC2Fmj4azluZbjra
ZHKXAeXmibDpRo0UJeovH27+rP8j/NKK+nvZX/+gt0azfC+0SgFwhM6DFFPklJWj
FXGxe2vOUO8Qjke0GwGfqUcjhXJPYg9DEC8RxvliBANME1o0HwkPaNPWWHdjacm2
3K5FeR4jbPYIsfLdazH+G1KfYnQc8GgleSYBIeBKSyyy0z0Z9FXUTZGTjXZSgup4
TqUJbUG0whUtVPzRzd8/DLeWK+2JXfLk35MrwVwv/TDdKuije7Pk7ABrb9B2Lnk=
=O/OP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-january-25-2019' into staging
MIPS queue for January 25, 2019
# gpg: Signature made Fri 25 Jan 2019 13:25:57 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-january-25-2019:
docs/qemu-cpu-models: Add MIPS/nanoMIPS QEMU supported CPU models
qemu-doc: Add nanoMIPS ISA information
tests: tcg: mips: Remove old directories
tests: tcg: mips: Add two new Makefiles
tests: tcg: mips: Move source files to new locations
MAINTAINERS: Update MIPS sections
target/mips: Add I6500 core configuration
target/mips: nanoMIPS: Fix branch handling
disas: nanoMIPS: Amend DSP instructions related comments
target/mips: Extend gen_scwp() functionality to support EVA
target/mips: Correct the second argument type of cpu_supports_isa()
target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbers
target/mips: nanoMIPS: Remove an unused macro
target/mips: nanoMIPS: Remove duplicate macro definitions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove Stefan Markovic as a reviewer for MIPS directories and
files, as he left Wave Computing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
The dtrace systemtap trace backend for QEMU is very powerful but it is
also somewhat unfriendly to users who aren't familiar with systemtap,
or who don't need its power right now.
stap -e "....some strange script...."
The 'log' backend for QEMU by comparison is very crude but incredibly
easy to use:
$ qemu -d trace:qio* ...some args...
23266@1547735759.137292:qio_channel_socket_new Socket new ioc=0x563a8a39d400
23266@1547735759.137305:qio_task_new Task new task=0x563a891d0570 source=0x563a8a39d400 func=0x563a86f1e6c0 opaque=0x563a89078000
23266@1547735759.137326:qio_task_thread_start Task thread start task=0x563a891d0570 worker=0x563a86f1ce50 opaque=0x563a891d9d90
23273@1547735759.137491:qio_task_thread_run Task thread run task=0x563a891d0570
23273@1547735759.137503:qio_channel_socket_connect_sync Socket connect sync ioc=0x563a8a39d400 addr=0x563a891d9d90
23273@1547735759.138108:qio_channel_socket_connect_fail Socket connect fail ioc=0x563a8a39d400
This commit introduces a way to do simple printf style logging of probe
points using systemtap. In particular it creates another set of tapsets,
one per emulator:
/usr/share/systemtap/tapset/qemu-*-log.stp
These pre-define probe functions which simply call printf() on their
arguments. The printf() format string is taken from the normal
trace-events files, with a little munging to the format specifiers
to cope with systemtap's more restrictive syntax.
With this you can now do
$ stap -e 'probe qemu.system.x86_64.log.qio*{}'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
We go one step further though and introduce a 'qemu-trace-stap' tool to
make this even easier
$ qemu-trace-stap run qemu-system-x86_64 'qio*'
22806@1547735341399856820 qio_channel_socket_new Socket new ioc=0x56135d1d7c00
22806@1547735341399862570 qio_task_new Task new task=0x56135cd66eb0 source=0x56135d1d7c00 func=0x56135af746c0 opaque=0x56135bf06400
22806@1547735341399865943 qio_task_thread_start Task thread start task=0x56135cd66eb0 worker=0x56135af72e50 opaque=0x56135c071d70
22806@1547735341399976816 qio_task_thread_run Task thread run task=0x56135cd66eb0
This tool is clever in that it will automatically change the
SYSTEMTAP_TAPSET env variable to point to the directory containing the
right set of probes for the QEMU binary path you give it. This is useful
if you have QEMU installed in /usr but are trying to test and trace a
binary in /home/berrange/usr/qemu-git. In that case you'd do
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
And it'll make sure /home/berrange/usr/qemu-git/share/systemtap/tapset
is used for the trace session
The 'qemu-trace-stap' script takes a verbose arg so you can understand
what it is running
$ qemu-trace-stap run /home/berrange/usr/qemu-git/bin/qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Compiling script 'probe qemu.system.x86_64.log.qio* {}'
Running script, <Ctrl>-c to quit
...trace output...
It can enable multiple probes at once
$ qemu-trace-stap run qemu-system-x86_64 'qio*' 'qcrypto*' 'buffer*'
By default it monitors all existing running processes and all future
launched proceses. This can be restricted to a specific PID using the
--pid arg
$ qemu-trace-stap run --pid 2532 qemu-system-x86_64 'qio*'
Finally if you can't remember what probes are valid it can tell you
$ qemu-trace-stap list qemu-system-x86_64
ahci_check_irq
ahci_cmd_done
ahci_dma_prepare_buf
ahci_dma_prepare_buf_fail
ahci_dma_rw_buf
ahci_irq_lower
...snip...
Or list just those matching a prefix pattern
$ qemu-trace-stap list -v qemu-system-x86_64 'qio*'
Using tapset dir '/home/berrange/usr/qemu-git/share/systemtap/tapset' for binary '/home/berrange/usr/qemu-git/bin/qemu-system-x86_64'
Listing probes with name 'qemu.system.x86_64.log.qio*'
qio_channel_command_abort
qio_channel_command_new_pid
qio_channel_command_new_spawn
qio_channel_command_wait
qio_channel_file_new_fd
...snip...
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20190123120016.4538-5-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Seeing as I'll get pegged by get_maintainers.pl anyway I might as well
make the support status of the data mining config official.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
I have made many significant contributions to the Xen code in QEMU,
particularly the recent patches introducing a new PV device framework.
I intend to make further significant contributions, porting other PV back-
ends to the new framework with the intent of eventually removing the
legacy code. It therefore seems reasonable that I become a maintainer of
the Xen code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds the transformations necessary to get dataplane/xen-block.c
to build against the new XenBus/XenDevice framework. MAINTAINERS is also
updated due to the introduction of dataplane/xen-block.h.
NOTE: Existing data structure names are retained for the moment. These will
be modified by subsequent patches. A typedef for XenBlockDataPlane
has been added to the header (based on the old struct XenBlkDev name
for the moment) so that the old names don't need to leak out of the
dataplane code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The new xen-block XenDevice implementation requires the same core
dataplane as the legacy xen_disk implementation it will eventually replace.
This patch therefore copies the legacy xen_disk.c source module into a new
dataplane/xen-block.c source module as the basis for the new dataplane and
adjusts the MAINTAINERS file accordingly.
NOTE: The duplicated code is not yet built. It is simply put into place by
this patch (just fixing style violations) such that the
modifications that will need to be made to the code are not
conflated with code movement, thus making review harder.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This patch adds new XenDevice-s: 'xen-disk' and 'xen-cdrom', both derived
from a common 'xen-block' parent type. These will eventually replace the
'xen_disk' (note the underscore rather than hyphen) legacy PV backend but
it is illustrative to build up the implementation incrementally, along with
the XenBus/XenDevice framework. Subsequent patches will therefore add to
these devices' implementation as new features are added to the framework.
After this patch has been applied it is possible to instantiate new
'xen-disk' or 'xen-cdrom' devices with a single 'vdev' parameter, which
accepts values adhering to the Xen VBD naming scheme [1]. For example, a
command-line instantiation of a xen-disk can be done with an argument
similar to the following:
-device xen-disk,vdev=hda
The implementation of the vdev parameter formulates the appropriate VBD
number for use in the PV protocol.
[1] https://xenbits.xen.org/docs/unstable/man/xen-vbd-interface.7.html
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Anthony Perard <anthony.perard@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The VGA driver built from Ben's QemuMacDrivers repository is used exclusively
by the Mac machines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
hw/gpio/mpc8xxx.c is only used by the e500 machine, so add it there.
And the hw/input/adb* files are specific to the Mac machines, so
they should be assigned to these categories.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The sm501 model belonged to SH before but that seems to be inactive
now and latest changes were for sam460ex which is the more active user
of this device at the moment so let's adopt sm501 for sam460ex.
Also add device tree and firmware sources and binaries.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some of the files in hw/input/, hw/misc/ and hw/timer/ are only
used by one of the ARM machines, so we can assign these files to
the corresponding boards.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1546433583-18397-1-git-send-email-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit adds the cpu-cluster type. It aims at gathering CPUs from
the same cluster in a machine.
For now it only has a `cluster-id` property.
Documentation in cluster.h written with the help of Peter Maydell.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181207090135.7651-2-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJcLj4bAAoJENSXKoln91plJ3MH/RauD4z1smuHP2LBRqtUgFEv
+pZxNtmHQGcpJ6QexYzldcGR4gPgiBW6AYO3qVFSduwNWO7UjOPBAl/fKvlz5pWL
BJw9odsrOXjG/6cXcy3QWkYxizC/0/HzPjWa3/sSa3Dkygib9jB80wzR3ZpFreLo
XQsbcwso4aaoB0X1M4tfHsY6xUcxmzB+V73xFh2ptHrMTGoCZJbo12Np0rdwEa9v
WMV9wn1ptB3R0QJNxA2X+vbnJsXujG15DZC7Wj1HUmz9LcLG5doTCGXLXOxD0zhy
6HKB/bVTvbDdDti17JvbmtdVhzgoLMtnQFly0e77px3XRMonQHMpsQGCIvWyd+g=
=y41H
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-december-2018-v3' into staging
MIPS queue for December 2018 - v3
# gpg: Signature made Thu 03 Jan 2019 16:53:47 GMT
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-december-2018-v3: (44 commits)
tests/tcg: mips: Test R5900 three-operand MADDU1
tests/tcg: mips: Test R5900 three-operand MADDU
tests/tcg: mips: Test R5900 three-operand MADD1
tests/tcg: mips: Test R5900 three-operand MADD
disas: nanoMIPS: Add a note on documentation
disas: nanoMIPS: Reorder declarations and definitions of gpr decoders
disas: nanoMIPS: Comment the decoder of 'gpr1' gpr encoding type
disas: nanoMIPS: Rename the decoder of 'gpr1' gpr encoding type
disas: nanoMIPS: Comment the decoder of 'gpr2.reg2' gpr encoding type
disas: nanoMIPS: Rename the decoder of 'gpr2.reg2' gpr encoding type
disas: nanoMIPS: Comment the decoder of 'gpr2.reg1' gpr encoding type
disas: nanoMIPS: Rename the decoder of 'gpr2.reg1' gpr encoding type
disas: nanoMIPS: Comment the decoder of 'gpr4.zero' gpr encoding type
disas: nanoMIPS: Rename the decoder of 'gpr4.zero' gpr encoding type
disas: nanoMIPS: Comment the decoder of 'gpr4' gpr encoding type
disas: nanoMIPS: Rename the decoder of 'gpr4' gpr encoding type
disas: nanoMIPS: Comment the decoder of 'gpr3.src.store' gpr encoding type
disas: nanoMIPS: Rename the decoder of 'gpr3.src.store' gpr encoding type
disas: nanoMIPS: Comment the decoder of 'gpr3' gpr encoding type
disas: nanoMIPS: Rename the decoder of 'gpr3' gpr encoding type
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Aleksandar Rikalo as a reviewer for MIPS content. Aleksandar
brings to us more than six years of experience in working on a variety
of development tools for MIPS architectures, and will greatly help
QEMU community understand and support intricacies of MIPS better.
Acked-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reorder items alphabetically for better visibility.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add ability to redirect mails (sent to qemu-devel) containing
"mips" in the subject line to MIPS maintainers and reviewers.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add following files as maintained within the main MIPS target
section in MAINTAINERS:
default-configs/mips64el-linux-user.mak
default-configs/mips64-linux-user.mak
default-configs/mipsn32el-linux-user.mak
default-configs/mipsn32-linux-user.mak
default-configs/mipsel-linux-user.mak
default-configs/mips-linux-user.mak
default-configs/mips64el-softmmu.mak
default-configs/mips64-softmmu.mak
default-configs/mipsel-softmmu.mak
default-configs/mips-softmmu.mak
default-configs/mips-softmmu-common.mak
Future nanoMIPS user mode will also have its .mak file, and
because of that "*mips*" was used instead of "mips*" as a
shorthand in the new item in MAINTAINERS.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
This pull request contains the first set of RISC-V patches I'd like to
target for the 3.2 development cycle. It's really just a collection of
bug fixes with one major new feature: PCIe can now be attached to RISC-V
guests.
This has passed my usual test of booting the latest Linux RC into a
Fedora disk image on the virt machine.
-----BEGIN PGP SIGNATURE-----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=BAOm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-3.2-part1' into staging
RISC-V Changes for 3.2, Part 1
This pull request contains the first set of RISC-V patches I'd like to
target for the 3.2 development cycle. It's really just a collection of
bug fixes with one major new feature: PCIe can now be attached to RISC-V
guests.
This has passed my usual test of booting the latest Linux RC into a
Fedora disk image on the virt machine.
# gpg: Signature made Fri 21 Dec 2018 16:01:29 GMT
# gpg: using RSA key EF4CA1502CCBAB41
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>"
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-3.2-part1:
MAINTAINERS: Mark RISC-V as Supported
riscv/cpu: use device_class_set_parent_realize
target/riscv/pmp.c: Fix pmp_decode_napot()
sifive_uart: Implement interrupt pending register
RISC-V: Enable second UART on sifive_e and sifive_u
RISC-V: Fix PLIC pending bitfield reads
RISC-V: Fix CLINT timecmp low 32-bit writes
RISC-V: Add hartid and \n to interrupt logging
sifive_u: Set 'clock-frequency' DT property for SiFive UART
sifive_u: Add clock DT node for GEM ethernet
riscv: Enable VGA and PCIE_VGA
hw/riscv/virt: Connect the gpex PCIe
hw/riscv/virt: Adjust memory layout spacing
hw/riscv/virt: Increase the number of interrupts
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <a135ee1a88cd7bd08993a519d4d654da27785254.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <9d777f619840a8dd8e4f3834dcfc3bd28e052ccd.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <76f8f9383a766dbcade883e897dec8cfef669799.1545246859.git.alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pvrdma requires that the same GID attached to it will be attached to the
backend device in the host.
A new QMP messages is defined so pvrdma device can broadcast any change
made to its GID table. This event is captured by libvirt which in turn
will update the GID table in the backend device.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a
given MAD class.
This does not go hand-by-hand with qemu pvrdma device's requirements
where each VM is MAD agent.
Fix it by adding implementation of RDMA MAD multiplexer service which on
one hand register as a sole MAD agent with the kernel module and on the
other hand gives service to more than one VM.
Design Overview:
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
----------------
A server process is registered to UMAD framework (for this to work the
rdma_cm kernel module needs to be unloaded) and creates a unix socket to
listen to incoming request from clients.
A client process (such as QEMU) connects to this unix socket and
registers with its own GID.
TX:
----
When client needs to send rdma_cm MAD message it construct it the same
way as without this multiplexer, i.e. creates a umad packet but this
time it writes its content to the socket instead of calling umad_send().
The server, upon receiving such a message fetch local_comm_id from it so
a context for this session can be maintain and relay the message to UMAD
layer by calling umad_send().
RX:
----
The server creates a worker thread to process incoming rdma_cm MAD
messages. When an incoming message arrived (umad_recv()) the server,
depending on the message type (attr_id) looks for target client by
either searching in gid->fd table or in local_comm_id->fd table. With
the extracted fd the server relays to incoming message to the client.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
There's at least two of us that are paid to work on this.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This pull request supersedes the one from 2018-12-13.
This is a revised first ppc pull request for qemu-4.0. Highlights
are:
* Most of the code for the POWER9 "XIVE" interrupt controller
(not complete yet, but we're getting there)
* A number of g_new vs. g_malloc cleanups
* Some IRQ wiring cleanups
* A fix for how we advertise NUMA nodes to the guest for pseries
-----BEGIN PGP SIGNATURE-----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=IN1s
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20181221' into staging
ppc patch queue 2018-12-21
This pull request supersedes the one from 2018-12-13.
This is a revised first ppc pull request for qemu-4.0. Highlights
are:
* Most of the code for the POWER9 "XIVE" interrupt controller
(not complete yet, but we're getting there)
* A number of g_new vs. g_malloc cleanups
* Some IRQ wiring cleanups
* A fix for how we advertise NUMA nodes to the guest for pseries
# gpg: Signature made Fri 21 Dec 2018 05:34:12 GMT
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.0-20181221: (40 commits)
MAINTAINERS: PPC: add a XIVE section
spapr: change default CPU type to POWER9
spapr: introduce an 'ic-mode' machine option
spapr: add an extra OV5 field to the sPAPR IRQ backend
spapr: add a 'reset' method to the sPAPR IRQ backend
spapr: extend the sPAPR IRQ backend for XICS migration
spapr: allocate the interrupt thread context under the CPU core
spapr: add device tree support for the XIVE exploitation mode
spapr: add hcalls support for the XIVE exploitation interrupt mode
spapr: introduce a new machine IRQ backend for XIVE
spapr-iommu: Always advertise the maximum possible DMA window size
spapr/xive: use the VCPU id as a NVT identifier
spapr/xive: introduce a XIVE interrupt controller
ppc/xive: notify the CPU when the interrupt priority is more privileged
ppc/xive: introduce a simplified XIVE presenter
ppc/xive: introduce the XIVE interrupt thread context
ppc/xive: add support for the END Event State Buffers
Changes requirement for "vsubsbs" instruction
spapr: export and rename the xics_max_server_number() routine
spapr: introduce a spapr_irq_init() routine
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMBIOS is just another firmware interface used by some QEMU models.
We will later introduce more firmware interfaces in this subdirectory.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Given I've spent a fair amount of time around this code now I'm
putting myself forward as a maintainer. Also given that the code has
been extensively re-written and has testing and new incoming features
it is probably more than just Odd Fixes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
