Record device property types, and provide a list of properties at device
registration time.
Add a "device" property type that holds a reference to annother device.
Signed-off-by: Paul Brook <paul@codesourcery.com>
The ARMv7-M NVIC device pokes itself into the CPU state. Now we have a
proper device model we can have the CPU/SoC code do this.
Signed-off-by: Paul Brook <paul@codesourcery.com>
All,
I've recently been playing around with migration via exec. Unfortunately,
when starting the incoming qemu process with "-incoming exec:cmd", it suffers
the same problem that -incoming tcp used to suffer; namely, that you can't
interact with the monitor until after the migration has happened. This causes
problems for libvirt usage of -incoming exec, since libvirt expects to be able
to access the monitor ahead of time. This fairly simple patch allows you to
access the monitor both before and after the migration has completed using exec.
(note: developed/tested with qemu-kvm, but applies perfectly fine to qemu)
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When a reset is requested, the current e1000 emulation never clears the
reset bit which may cause a driver to hang. This patch masks the reset
bit out when setting the control registert, so the reset is immediately
completed.
Signed-off-by: Kevin Wolf <mail@kevin-wolf.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This setup was designed by petalogix and is supported by upstream linux.
The design targets a xilinx spartan-3a-1800 dsp board with MMU.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
We have both IRQ sinks and GPIO inputs. These are in principle exactly
the same thing, so remove the former.
Signed-off-by: Paul Brook <paul@codesourcery.com>
"struct timeval last" caused a compilation error with mingw32
(missing header for struct timeval).
It is unused, so it was possible to remove it.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Implement and use a common device bus state. The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations. For legacy code we allow a NULL parent, but that
should go away eventually.
Also tweak creation code to veriry theat a device in on the right bus.
Signed-off-by: Paul Brook <paul@codesourcery.com>
After creating an automated regression test to test the sysrq
responses while running a linux image in qemu, I found that the
simulated uart was eating the character right after the sysrq about
75% of the time.
The problem is that the qemu sets the LSR_DR (data ready) bit on a
serial break. The automated tests can send a break and the sysrq
character quickly enough that the qemu serial fifo has a real
character available. When there is valid character in the fifo, it
gets consumed by the serial driver in the guest OS.
The real hardware also appears to set the LSR_DR but always appears to
have a null byte in this condition. This patch changes the qemu
behavior to match the tested characteristics of a real 16550 chip.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Implement the serial break via usb serial.
The second data byte in ftdi status packet contains the break status.
The values were already defined in usb-serial.c so it was a matter of
making use of the event_trigger to form a urb to send over to the host
controller with the serial break status set.
This was tested against a linux development image which enables sysrq
via a serial break on the ftdi usb console.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Add the parameter 'order' to qemu_register_reset and sort callbacks on
registration. On system reset, callbacks with lower order will be
invoked before those with higher order. Update all existing users to the
standard order 0.
Note: At least for x86, the existing users seem to assume that handlers
are called in their registration order. Therefore, the patch preserves
this property. If someone feels bored, (s)he could try to identify this
dependency and express it properly on callback registration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
kvm_physical_sync_dirty_bitmap() takes the end address as second
argument, not the region size. Moverover, the kvm API should not be used
directly here, but cpu_physical_sync_dirty_bitmap().
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch converts the current callers of qemu_fopen_ops().
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
f80f9ec changed the order that machines are registered which had the effect of
changing the default machine. This changeset introduces a new is_default field
so that machine types can declare that they are the default for an architecture.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
My previous commit, f92f8afebe, broke -vnc (spotted by Glauber Costa). This
is because it's necessary to tell when the no special display parameters have
been passed and default to SDL or VNC appropriately.
This refactors the display selection logic to be less complicated which has
the effect of fixing the regression mentioned above.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
initrd must be kept on the memory area below 4g. By not doing this,
we're seeing guests break while using -initrd and values of -mem
superior to 4096.
Signed-off-by: Glauber Costa <glommer@redhat.com>
The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.
Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.
Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: Paul Brook <paul@codesourcery.com>
If the target only has a 32-bit physical address space then
the code to map >4G ram breaks horribly, and causes compiler warnings.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Instead of exporting a custom structure to represent different
interrupt types, just export the irq array and have the top
elements point to the NMI lines.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
