Even if the host is somehow using compare to do compare-and-write, the
host should be notified immediately about the compare failure and not
have to wait for the driver to potentially retry the command.
Fixes: 0a384f923f ("hw/block/nvme: add compare command")
Reported-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Since the nvme_blk_read/write are used by both the data and metadata
portions of the IO, it can't have the 512B alignment requirement.
Without this change any metadata transfer, which length isn't a multiple
of 512B and which is bigger than 512B, will result in only a partial
transfer.
Signed-off-by: Mateusz Kozlowski <kozlowski.mateuszpl@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
As the Xen backend operations were abstracted out into a function table to
allow for internally emulated Xen support, we missed the xen_init_pv()
code path which also needs to install the operations for the true Xen
libraries. Add the missing call to setup_xen_backend_ops().
Fixes: b6cacfea0b ("hw/xen: Add evtchn operations to allow redirection to internal emulation")
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <5dfb65342d4502c1ce2f890c97cff20bf25b3860.camel@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This reverts commit 1d0a8eba38.
The commit made the wrong assumption that 64-bit distros are most
common these days on arm devices, but as Liviu Ionescu pointed out,
the recommended OS for the very popular Raspberry Pi boards is still
the 32-bit variant, and thus likely still used by a lot of people:
https://www.raspberrypi.com/software/operating-systems/
Thus it's likely still a little bit too early to put this host
environment on the deprecation list and we should wait a little
bit longer 'til 64-bit distros are the predominant ones.
Message-Id: <20230317165504.613172-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- Various developers are reluctant to git Cirrus-CI the permissions
requested to access their GitHub account.
- When we use the cirrus-run script to trigger Cirrus-CI job from
GitLab-CI, the GitLab-CI job is restricted to a 1h timeout
(often not enough).
- Although Cirrus-CI VMs are more powerful than GitLab-CI ones,
its free plan is limited in 2 concurrent jobs.
- The GitLab-CI MSYS2 jobs are a 1:1 mapping with the Cirrus-CI ones
(modulo the environment caching).
Reduce the maintenance burden by removing the Cirrus-CI config file,
keeping the GitLab-CI jobs.
Update Yonggang Luo's maintenance file list to the new file, which
use the same environment shell.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230322135721.61138-3-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Include the mingw-w64-x86_64-spice package so SPICE is covered:
C compiler for the host machine: cc -m64 -mcx16 (gcc 12.2.0 "cc (Rev10, Built by MSYS2 project) 12.2.0")
...
Run-time dependency spice-protocol found: YES 0.14.4
Run-time dependency spice-server found: YES 0.15.1
In particular this would have helped catching the build issue
reported as https://gitlab.com/qemu-project/qemu/-/issues/1553:
[1851/5253] Compiling C object libcommon.fa.p/ui_spice-core.c.obj
FAILED: libcommon.fa.p/ui_spice-core.c.obj
../ui/spice-core.c: In function 'watch_remove':
../ui/spice-core.c:152:5: error: implicit declaration of function 'qemu_close_to_socket' [-Werror=implicit-function-declaration]
152 | qemu_close_to_socket(watch->fd);
| ^~~~~~~~~~~~~~~~~~~~
../ui/spice-core.c:152:5: error: nested extern declaration of 'qemu_close_to_socket' [-Werror=nested-externs]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230322135721.61138-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
GCC13 reports an error :
../target/s390x/tcg/fpu_helper.c:123:5: error: conflicting types for ‘float_comp_to_cc’ due to enum/integer mismatch; have ‘int(CPUS390XState *, FloatRelation)’ {aka ‘int(struct CPUArchState *, FloatRelation)’} [-Werror=enum-int-mismatch]
123 | int float_comp_to_cc(CPUS390XState *env, FloatRelation float_compare)
| ^~~~~~~~~~~~~~~~
In file included from ../target/s390x/tcg/fpu_helper.c:23:
../target/s390x/s390x-internal.h:302:5: note: previous declaration of ‘float_comp_to_cc’ with type ‘int(CPUS390XState *, int)’ {aka ‘int(struct CPUArchState *, int)’}
302 | int float_comp_to_cc(CPUS390XState *env, int float_compare);
| ^~~~~~~~~~~~~~~~
Fixes: 71bfd65c5f ("softfloat: Name compare relation enum")
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230321161609.716474-3-clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Bring the block files in line with the QEMU coding style, with spaces
for indentation. This patch partially resolves the issue 371.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230314095001.13801-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Bring the block files in line with the QEMU coding style, with spaces
for indentation. This patch partially resolves the issue 371.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/371
Signed-off-by: Yeqi Fu <fufuyqqqqqq@gmail.com>
Message-Id: <20230315043229.62100-1-fufuyqqqqqq@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When dm_restrict is set, QEMU isn't permitted to update the XenStore node
to indicate its running status. Previously, the xs_write() call would fail
but the failure was ignored.
However, in refactoring to allow for emulated XenStore operations, a new
call to xs_open() was added. That one didn't fail gracefully, causing a
fatal error when running in dm_restrict mode.
Partially revert the offending patch, removing the additional call to
xs_open() because the global 'xenstore' variable is still available; it
just needs to be used with qemu_xen_xs_write() now instead of directly
with the xs_write() libxenstore function.
Also make the whole thing conditional on !xen_domid_restrict. There's no
point even registering the state change handler to attempt to update the
XenStore node when we know it's destined to fail.
Fixes: ba2a92db1f ("hw/xen: Add xenstore operations to allow redirection to internal emulation")
Reported-by: Jason Andryuk <jandryuk@gmail.com>
Co-developed-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <1f141995bb61af32c2867ef5559e253f39b0949c.camel@infradead.org>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
- update Alpine image used for testing images
- include libslirp in custom runner build env
- update gitlab-runner recipe for CentOS
- update docker calls for better caching behaviour
- document some plugin callbacks
- don't use tags to define drives for lkft baseline tests
- fix missing clear of plugin_mem_cbs
- fix iotests to report individual results
- update the gitdm metadata for contributors
- avoid printing comments before g_test_init()
- probe for multiprocess support before running avocado test
- refactor igb.py into netdev-ethtool.py avocado test
- rebuild openbsd to have more space space for iotests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQbGkoACgkQ+9DbCVqe
KkT2kQgAif70dGyn2bcv7OYv2LgAcSzDGTIsOfMM6gYc9bm3nU/R/cj9cy8Qgbnu
v6BSVeig5AVBWI1UTuMNeKW1BWoQYfxg2kdduSyAzMZS44r09ch9iabSbxbadC1e
L1RrRWlzs/MwWX8IclAyEj1jr+DB+/DwoG61IP3215XXSy84e/XV4j+JAyBEzXQ9
LdznGyqyItg3S6rnVpRP/wjR0P3VlrYOLOjFfCw7gB8JrlW7KIr8hWkHXYuS2mF5
UyXTBwbXwYB5BAx0zXC3SVgl0Gs1qymaRUX77dlotlpVVo0Ql8a06dHPtYrjMNgA
/Nyat3Dbbu7Rai+IzZIJl3tGx850wg==
=XR0M
-----END PGP SIGNATURE-----
Merge tag 'pull-for-8.0-220323-1' of https://gitlab.com/stsquad/qemu into staging
Misc fixes for 8.0 (testing, plugins, gitdm)
- update Alpine image used for testing images
- include libslirp in custom runner build env
- update gitlab-runner recipe for CentOS
- update docker calls for better caching behaviour
- document some plugin callbacks
- don't use tags to define drives for lkft baseline tests
- fix missing clear of plugin_mem_cbs
- fix iotests to report individual results
- update the gitdm metadata for contributors
- avoid printing comments before g_test_init()
- probe for multiprocess support before running avocado test
- refactor igb.py into netdev-ethtool.py avocado test
- rebuild openbsd to have more space space for iotests
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmQbGkoACgkQ+9DbCVqe
# KkT2kQgAif70dGyn2bcv7OYv2LgAcSzDGTIsOfMM6gYc9bm3nU/R/cj9cy8Qgbnu
# v6BSVeig5AVBWI1UTuMNeKW1BWoQYfxg2kdduSyAzMZS44r09ch9iabSbxbadC1e
# L1RrRWlzs/MwWX8IclAyEj1jr+DB+/DwoG61IP3215XXSy84e/XV4j+JAyBEzXQ9
# LdznGyqyItg3S6rnVpRP/wjR0P3VlrYOLOjFfCw7gB8JrlW7KIr8hWkHXYuS2mF5
# UyXTBwbXwYB5BAx0zXC3SVgl0Gs1qymaRUX77dlotlpVVo0Ql8a06dHPtYrjMNgA
# /Nyat3Dbbu7Rai+IzZIJl3tGx850wg==
# =XR0M
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 22 Mar 2023 15:10:02 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-for-8.0-220323-1' of https://gitlab.com/stsquad/qemu: (35 commits)
qtests: avoid printing comments before g_test_init()
contrib/gitdm: add group map for AMD
contrib/gitdm: add more individual contributors
contrib/gitdm: add revng to domain map
contrib/gitdm: add Alibaba to the domain-map
contrib/gitdm: add Amazon to the domain map
contrib/gitdm: Add SYRMIA to the domain map
contrib/gitdm: Add ASPEED Technology to the domain map
iotests: remove the check-block.sh script
iotests: register each I/O test separately with meson
iotests: always use a unique sub-directory per test
iotests: connect stdin to /dev/null when running tests
iotests: print TAP protocol version when reporting tests
iotests: strip subdir path when listing tests
iotests: allow test discovery before building
iotests: explicitly pass source/build dir to 'check' command
tests/vm: custom openbsd partitioning to increase /home space
tests/vm: skip X11 in openbsd installation
include/qemu/plugin: Inline qemu_plugin_disable_mem_helpers
include/qemu: Split out plugin-event.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The TAP protocol version line must be the first thing printed on
stdout. The migration test failed that requirement in certain
scenarios:
# Skipping test: Userfault not available (builtdtime)
TAP version 13
# random seed: R02Sc120c807f11053eb90bfea845ba1e368
1..32
# Start of x86_64 tests
# Start of migration tests
....
The TAP version is printed by g_test_init(), so we need to make
sure that any methods which print are run after that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230317170553.592707-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
AMD recently acquired Xilinx and contributors have been transitioning
their emails across.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Vikram Garhwal <vikram.garhwal@amd.com>
Cc: Stefano Stabellini <stefano.stabellini@amd.com>
Cc: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Cc: Tong Ho <tong.ho@xilinx.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Message-Id: <20230315174331.2959-33-alex.bennee@linaro.org>
I've only added the names explicitly acked.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Bin Meng <bmeng@tinylab.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Acked-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-32-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Anton Johansson <anjo@rev.ng>
Cc: Niccolò Izzo <nizzo@rev.ng>
Cc: Paolo Montesel <babush@rev.ng>
Reviewed-by: Alessandro Di Federico <ale@rev.ng>
Message-Id: <20230315174331.2959-31-alex.bennee@linaro.org>
This replaces the previous attempt to add c-sky.com. Group everything
under Alibaba now.
Added as requested by LIU Zhiwei.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Message-Id: <20230315174331.2959-30-alex.bennee@linaro.org>
We have multiple contributors from both .co.uk and .com versions of
the address. Also add .de for completeness sake.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Paul Durrant <pdurrant@amazon.com>
Cc: David Wooodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230315174331.2959-29-alex.bennee@linaro.org>
The company website lists QEMU amongst the things they work on so I
assume these are corporate contributions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Milica Lazarevic <milica.lazarevic@syrmia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230315174331.2959-28-alex.bennee@linaro.org>
We have a number of contributors from this domain which is a corporate
endeavour.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Steven Lee <steven_lee@aspeedtech.com>
Cc: Troy Lee <troy_lee@aspeedtech.com>
Cc: Howard Chiu <howard_chiu@aspeedtech.com>
Cc: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Troy Lee <troy_lee@aspeedtech.com>
Message-Id: <20230315174331.2959-27-alex.bennee@linaro.org>
Now that meson directly invokes the individual I/O tests, the
check-block.sh wrapper script is no longer required.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-9-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-26-alex.bennee@linaro.org>
Currently meson registers a single test that invokes an entire group of
I/O tests, hiding the test granularity from meson. There are various
downsides of doing this
* You cannot ask 'meson test' to invoke a single I/O test
* The meson test timeout can't be applied to the individual
tests
* Meson only gets a pass/fail for the overall I/O test group
not individual tests
* If a CI job gets killed by the GitLab timeout, we don't
get visibility into how far through the I/O tests
execution got.
This switches meson to perform test discovery by invoking 'check' in
dry-run mode. It then registers one meson test case for each I/O
test. Parallel execution remains disabled since the I/O tests do not
use self contained execution environments and thus conflict with
each other.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-8-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-25-alex.bennee@linaro.org>
The current test runner is only safe against parallel execution within
a single instance of the 'check' process, and only if -j is given a
value greater than 2. This prevents running multiple copies of the
'check' process for different test scenarios.
This change switches the output / socket directories to always include
the test name, image format and image protocol. This should allow full
parallelism of all distinct test scenarios. eg running both qcow2 and
raw tests at the same time, or both file and nbd tests at the same
time.
It would be possible to allow for parallelism of the same test scenario
by including the pid, but that would potentially let many directories
accumulate over time on failures, so is not done.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-7-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-24-alex.bennee@linaro.org>
Currently the tests have their stdin inherited from the test harness,
meaning they are connected to a TTY. The QEMU processes spawned by
certain tests, however, modify TTY settings and if the test exits
abnormally the settings might not be restored.
The python test harness thus has some logic which will capture the
initial TTY settings and restore them once all tests are finished.
This does not, however, take into account the possibility of many
copies of the 'check' program running in parallel. With parallel
execution, a later invokation may save the TTY state that QEMU has
already modified, and thus restore bad state leaving the TTY
non-functional.
None of the I/O tests shnould actually be interactive requiring
user input and so they should not require a TTY at all. To avoid
this while TTY save/restore complexity we can connect the test
stdin to /dev/null instead.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-6-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-23-alex.bennee@linaro.org>
Recently meson started complaining that TAP test reports don't include
the TAP protocol version. While this warning is bogus and has since been
removed from Meson, it looks like good practice to include this header
going forward. The GLib library test harness has started unconditionally
printing the version, so this brings the I/O tests into line.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-5-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-22-alex.bennee@linaro.org>
When asking 'check' to list individual tests by invoking it in dry run
mode, it prints the paths to the tests relative to the base of the
I/O test directory.
When asking 'check' to run an individual test, however, it mandates that
only the unqualified test name is given, without any path prefix. This
inconsistency makes it harder to ask for a list of tests and then invoke
each one.
Thus the test listing code is change to flatten the test names, by
printing only the base name, which can be directly invoked.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-4-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-21-alex.bennee@linaro.org>
The 'check' script can be invoked in "dry run" mode, in which case it
merely does test discovery and prints out all their names. Despite only
doing test discovery it still validates that the various QEMU binaries
can be found. This makes it impossible todo test discovery prior to
building QEMU. This is a desirable feature to support, because it will
let meson discover tests.
Fortunately the code in the TestEnv constructor is ordered in a way
that makes this fairly trivial to achieve. We can just short circuit
the constructor after the basic directory paths have been set.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-20-alex.bennee@linaro.org>
The 'check' script has some rather dubious logic whereby it assumes
that if invoked as a symlink, then it is running from a separate
source tree and build tree, otherwise it assumes the current working
directory is a combined source and build tree.
This doesn't work if you want to invoke the 'check' script using
its full source tree path while still using a split source and build
tree layout. This would be a typical situation with meson if you ask
it to find the 'check' script path using files('check').
Rather than trying to make the logic more magical, add support for
explicitly passing the dirs using --source-dir and --build-dir. If
either is omitted the current logic is maintained.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Hanna Czenczek <hreitz@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230303160727.3977246-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-19-alex.bennee@linaro.org>
The openbsd image is 20GB in size, but the automatic partitioning
done by the installer leaves /home with a mere ~3.5 GB of space,
wasting free space across many other partitions that are not
used by our build process:
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 1229692 213592 954616 18% /
/dev/sd0k 7672220 40 7288572 0% /home
/dev/sd0d 1736604 24 1649752 0% /tmp
/dev/sd0f 4847676 2505124 2100172 54% /usr
/dev/sd0g 1326684 555656 704696 44% /usr/X11R6
/dev/sd0h 4845436 1445932 3157236 31% /usr/local
/dev/sd0j 10898972 4 10354020 0% /usr/obj
/dev/sd0i 3343644 4 3176460 0% /usr/src
/dev/sd0e 2601212 19840 2451312 1% /var
This change tells the installer todo custom partitioning with
4 GB on /, 256 MB swap, and the remaining ~15GB for /home
openbsd$ df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/sd0a 7932412 4740204 2795588 63% /
/dev/sd0d 32164636 40 30556368 0% /home
This will avoid ENOSPC failures when tests that need to create
big files (disk images) run in parallel.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-3-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
As a VM used only for automated testing there is no need to
install the X11 stack.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230322123639.836104-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Now that we've broken the include loop with cpu.h,
we can bring this inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-8-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-18-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
The usage in hw/core/cpu.h only requires QEMU_PLUGIN_EV_MAX.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-7-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-17-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-6-richard.henderson@linaro.org>
[AJB: also syscall-trace.h]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-16-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This had been pulled in via qemu/plugin.h from hw/core/cpu.h,
but that will be removed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org>
[AJB: add various additional cases shown by CI]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
This macro is no longer used.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-4-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-14-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Now that we call qemu_plugin_disable_mem_helpers in cpu_tb_exec,
we don't need to do this in generated code as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-3-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-13-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
Do this in cpu_tb_exec (normal exit) and cpu_loop_exit (exception),
adjacent to where we reset can_do_io.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1381
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230310195252.210956-2-richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-12-alex.bennee@linaro.org>
Reviewed-by: Emilio Cota <cota@braap.org>
We are abusing the avocado tags which are intended to provide test
selection metadata to provide parameters to our test. This works OK up
until the point you need to have ,'s in the field as this is the tag
separator character which is the case for a number of the drive
parameters. Fix this by making drive a parameter to the common helper
function.
Fixes: 267fe57c23 (tests: add tuxrun baseline test to avocado)
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-11-alex.bennee@linaro.org>
So you can do:
cd tests/tcg/aarch64-linux-user
make -f ../Makefile.target help
To see the list of tests. You can then run each one individually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-8-alex.bennee@linaro.org>
Some API documentation was missed, rectify that.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1497
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-7-alex.bennee@linaro.org>
A couple of clean-ups here:
- inherit from the custom runners job for artefacts
- call check-avocado directly
- add some comments to the top about setup
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-6-alex.bennee@linaro.org>
This was broken when we moved to using the pre-built packages as we
didn't take care to ensure we used RPMs where required.
NB: I could never get this to complete on my test setup but I suspect
this was down to network connectivity and timeouts while downloading.
Fixes: 69c4befba1 (scripts/ci: update gitlab-runner playbook to use latest runner)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-5-alex.bennee@linaro.org>
Without libslip enabled we won't have user networking which means the
KVM tests won't run.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-4-alex.bennee@linaro.org>
It seems we also need to pass DOCKER_BUILDKIT as an argument to docker
itself to get the full benefit of caching.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Fabiano Rosas <farosas@suse.de>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230315174331.2959-3-alex.bennee@linaro.org>
The core of the test was utilising "ethtool -t eth1 offline" to run
through a test sequence. For reasons unknown the test hangs under some
configurations of the build on centos8-stream. Fundamentally running
the old fedora-31 cloud-init is just too much for something that is
directed at testing one device. So we:
- replace fedora with a custom kernel + buildroot rootfs
- rename the test from IGB to NetDevEthtool
- re-factor the common code, add (currently skipped) tests for other
devices which support ethtool
- remove the KVM limitation as its fast enough to run in KVM or TCG
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230322145529.4079753-1-alex.bennee@linaro.org>
