ca1e9c3ba1
161 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Michael S. Tsirkin
|
c85cad8105 |
tests/data/acpi: update after SMBIOS 2.0 change
Switching to SMBIOS3.0 by default shifts some addresses, so we get this
change in tests/data/acpi/q35/SSDT.dimmpxm :
@@ -389,6 +389,6 @@
}
}
- Name (MEMA, 0x07FFE000)
+ Name (MEMA, 0x07FFF000)
}
update the expected file to match.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Eric DeVolder
|
1141159cb4 |
ACPI: bios-tables-test.c step 5 (update expected table binaries)
Following the guidelines in tests/qtest/bios-tables-test.c, this
is step 5 and 6.
An examination of all the files impacted (as listed in
bios-tables-test-allowe-diff.h) shows only the MADT/APIC tables
bumping revision from 1 to 3, and a corresponding change to
the checksum. The below diff is typical:
--- /tmp/asl-1F9641.dsl 2023-05-16 15:18:31.292579156 -0400
+++ /tmp/asl-GVD741.dsl 2023-05-16 15:18:31.291579149 -0400
@@ -1,32 +1,32 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20230331 (64-bit version)
* Copyright (c) 2000 - 2023 Intel Corporation
*
- * Disassembly of tests/data/acpi/pc/APIC, Tue May 16 15:18:31 2023
+ * Disassembly of /tmp/aml-R4D741, Tue May 16 15:18:31 2023
*
* ACPI Data Table [APIC]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue (in hex)
*/
[000h 0000 004h] Signature : "APIC" [Multiple APIC Description Table (MADT)]
[004h 0004 004h] Table Length : 00000078
-[008h 0008 001h] Revision : 01
-[009h 0009 001h] Checksum : 8A
+[008h 0008 001h] Revision : 03
+[009h 0009 001h] Checksum : 88
[00Ah 0010 006h] Oem ID : "BOCHS "
[010h 0016 008h] Oem Table ID : "BXPC "
[018h 0024 004h] Oem Revision : 00000001
[01Ch 0028 004h] Asl Compiler ID : "BXPC"
[020h 0032 004h] Asl Compiler Revision : 00000001
[024h 0036 004h] Local Apic Address : FEE00000
[028h 0040 004h] Flags (decoded below) : 00000001
PC-AT Compatibility : 1
[02Ch 0044 001h] Subtable Type : 00 [Processor Local APIC]
[02Dh 0045 001h] Length : 08
[02Eh 0046 001h] Processor ID : 00
[02Fh 0047 001h] Local Apic ID : 00
[030h 0048 004h] Flags (decoded below) : 00000001
Processor Enabled : 1
@@ -81,24 +81,24 @@
[06Bh 0107 001h] Source : 0B
[06Ch 0108 004h] Interrupt : 0000000B
[070h 0112 002h] Flags (decoded below) : 000D
Polarity : 1
Trigger Mode : 3
[072h 0114 001h] Subtable Type : 04 [Local APIC NMI]
[073h 0115 001h] Length : 06
[074h 0116 001h] Processor ID : FF
[075h 0117 002h] Flags (decoded below) : 0000
Polarity : 0
Trigger Mode : 0
[077h 0119 001h] Interrupt Input LINT : 01
Raw Table Data: Length 120 (0x78)
- 0000: 41 50 49 43 78 00 00 00 01 8A 42 4F 43 48 53 20 // APICx.....BOCHS
+ 0000: 41 50 49 43 78 00 00 00 03 88 42 4F 43 48 53 20 // APICx.....BOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 00 00 E0 FE 01 00 00 00 00 08 00 00 // ................
0030: 01 00 00 00 01 0C 00 00 00 00 C0 FE 00 00 00 00 // ................
0040: 02 0A 00 00 02 00 00 00 00 00 02 0A 00 05 05 00 // ................
0050: 00 00 0D 00 02 0A 00 09 09 00 00 00 0D 00 02 0A // ................
0060: 00 0A 0A 00 00 00 0D 00 02 0A 00 0B 0B 00 00 00 // ................
0070: 0D 00 04 06 FF 00 00 01 // ........
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Message-Id: <20230517162545.2191-4-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <anisinha@redhat.com>
|
||
|
Gerd Hoffmann
|
e8d1e0cdd3 |
bios-tables-test: use 128M numa nodes on aarch64
Recent edk2 versions don't boot with very small numa nodes. Bump the size from 64M to 128M. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> |
||
|
Igor Mammedov
|
0a7044eb64 |
tests: acpi: update expected blobs
an extra devices at non-zero function address with static
_DSM method get exposed, ex:
+ Device (S15)
+ {
+ Name (_ADR, 0x00020005) // _ADR: Address
+ Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
+ {
+ Local0 = Package (0x01)
+ {
+ 0x66
+ }
+ Return (EDSM (Arg0, Arg1, Arg2, Arg3, Local0))
+ }
+ }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-29-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
05041d20d7 |
tests: acpi: update expected blobs
in PC machine case piix3-ide and PIIX4_PM get exposed
+ Device (S09)
+ {
+ Name (_ADR, 0x00010001) // _ADR: Address
+ }
+
+ Device (S0B)
+ {
+ Name (_ADR, 0x00010003) // _ADR: Address
+ }
in q35 machine case ich9-ahci gets exposed
+ Device (SFA)
+ {
+ Name (_ADR, 0x001F0002) // _ADR: Address
+ }
and addtional pci-testdev, virtio-balloon exposed in q35 multi-bridge test case
+ Device (S14)
+ {
+ Name (_ADR, 0x00020004) // _ADR: Address
+ }
+
...
+ Device (S22)
+ {
+ Name (_ADR, 0x00040002) // _ADR: Address
+ }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-26-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
f8e49d067f |
tests: acpi: update expected blobs
the only chenge is addition of _DSM- > EDSM method
on non-hotpluggable devices with configured acpi-index.
Something like:
+ Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
+ {
+ Local0 = Package (0x01)
+ {
+ 0x65
+ }
+ Return (EDSM (Arg0, Arg1, Arg2, Arg3, Local0))
+ }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-23-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
bda649537c |
tests: acpi: update expected blobs
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-19-imammedo@redhat.com> |
||
|
Igor Mammedov
|
e9ea452237 |
tests: acpi: update expected blobs
only following context change:
- Local1 = Zero
If ((Arg0 != ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") /* Device Labeling Interface */))
{
Return (Local0)
...
Return (Local0)
}
+ Local1 = Zero
Local2 = AIDX (DerefOf (Arg4 [Zero]), DerefOf (Arg4 [One]
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-16-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
30216b3eaf |
tests: acpi: update expected blobs
BNUM numbering changes across DSDT due to addition of new bridges.
Fixed missing PCI tree brunch (q35/DSDT.multi-bridge case):
// -device pcie-root-port,id=rpnohp,chassis=8,addr=0xA.0,hotplug=off
+ Device (S50)
+ {
+ Name (_ADR, 0x000A0000) // _ADR: Address
// -device pcie-root-port,id=rp3,chassis=9,bus=rpnohp
+ Device (S00)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ Name (BSEL, Zero)
+ Device (S00)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ Name (ASUN, Zero)
+ Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
+ {
+ Local0 = Package (0x02)
+ {
+ BSEL,
+ ASUN
+ }
+ Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
+ }
+
+ Name (_SUN, Zero) // _SUN: Slot User Number
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
+ {
+ PCEJ (BSEL, _SUN)
+ }
+ }
+
+ Method (DVNT, 2, NotSerialized)
+ {
+ If ((Arg0 & One))
+ {
+ Notify (S00, Arg1)
+ }
+ }
+ }
+ }
Fixed hotplug notification for leaf root port (hotplug=on) attached to
intermediate root port (hotplug=off) (q35/DSDT.multi-bridge case)
// -device pcie-root-port,id=rpnohp,chassis=8,addr=0xA.0,hotplug=off
+ Scope (S50)
+ {
// -device pcie-root-port,id=rp3,chassis=9,bus=rpnohp
+ Scope (S00)
+ {
+ Method (PCNT, 0, NotSerialized)
+ {
+ BNUM = Zero
+ DVNT (PCIU, One)
+ DVNT (PCID, 0x03)
+ }
+ }
+
+ Method (PCNT, 0, NotSerialized)
+ {
+ ^S00.PCNT ()
+ }
+ }
...
Method (PCNT, 0, NotSerialized)
{
+ ^S50.PCNT ()
^S13.PCNT ()
Populated slots being described on coldplugged bridges even if
ACPI bridge hotplug is disabled.
(pc/DSDT.hpbridge and pc/DSDT.hpbrroot)
...
Device (S18)
{
Name (_ADR, 0x00030000) // _ADR: Address
+ Device (S08)
+ {
+ Name (_ADR, 0x00010000) // _ADR: Address
+ }
+
+ Device (S10)
+ {
+ Name (_ADR, 0x00020000) // _ADR: Address
+ }
}
...
Device (S18)
{
Name (_ADR, 0x00030000) // _ADR: Address
+ Device (S00)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ }
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-11-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
6bf2d446d4 |
tests: acpi: update expected blobs
expected changes:
Basically adds devices present on root bus in form:
Device (SXX)
{
Name (_ADR, 0xYYYYYYYY) // _ADR: Address
}
On top of that For q35.noacpihp, all ACPI PCI hotplug
AML is removed and _OSC get native hotplug enabled:
CreateDWordField (Arg3, 0x04, CDW2)
CreateDWordField (Arg3, 0x08, CDW3)
Local0 = CDW3 /* \_SB_.PCI0._OSC.CDW3 */
- Local0 &= 0x1E
+ Local0 &= 0x1F
If ((Arg1 != One))
{
CDW1 |= 0x08
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230302161543.286002-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
d3860a57c7 |
tests: acpi: whitelist new q35.noacpihp test and pc.hpbrroot
for q35.noacpihp use plain default Q35 DSDT table as a starting point. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230302161543.286002-3-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Michael S. Tsirkin
|
ee92a56b08 |
tests/data/acpi/virt: drop (most) duplicate files.
When virt ACPI files were added, lots of duplicates were created because
we forgot that there's a no-prefix fallback: e.g. if
tests/data/acpi/virt/APIC.memhp is not there then test will use
tests/data/acpi/virt/APIC.
Drop these.
These were found with
$find tests/data/acpi/ -type f -exec sha256sum '{}' ';'|sort -d|uniq -w 64 --all-repeated=separate
(trick: -d does a dictionary sort so a no-suffix file ends up first).
Note: there are still a bunch of issues with duplicates left even after this.
First pc and q35 are often identical.
Second, sometimes files are identical but not identical to the default
fallback, e.g.
tests/data/acpi/pc/SLIT.cphp and tests/data/acpi/pc/SLIT.memhp
or
tests/data/acpi/q35/HMAT.acpihmat-noinitiator and tests/data/acpi/virt/HMAT.acpihmatvirt
Finding a way to deduplicate these is still a TODO item - softlinks
maybe?
We also need to make rebuild-expected-aml.sh smarter about not creating
these duplicates in the 1st place.
And maybe we should use softlinks instead of relying on a fallback
to make it explicit what version does each test expect?
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Jonathan Cameron
|
21063bcee8 |
tests: acpi: Update q35/DSDT.cxl for removed duplicate UID
Dropping the ID effects this table in trivial fashion. Reviewed-by: Gregory Price <gregory.price@memverge.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230206172816.8201-8-Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
4d6ee555ef |
tests: acpi: update expected blobs
Expected change removal of dynamic _DSM AML for non-hotpluggable
hots-bridge, storage, isa bridge devices from PC machine blobs:
- Scope (S00)
- {
- Name (ASUN, Zero)
- Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
- {
- Local0 = Package (0x02)
- {
- BSEL,
- ASUN
- }
- Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
- }
- }
-
- Scope (S08)
- {
- Name (ASUN, One)
- Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
- {
- Local0 = Package (0x02)
- {
- BSEL,
- ASUN
- }
- Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
- }
- }
-
- Scope (S10)
- {
- Name (ASUN, 0x02)
- Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
- {
- Local0 = Package (0x02)
- {
- BSEL,
- ASUN
- }
- Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
- }
- }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-41-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
beb680ff28 |
tests: acpi: update expected blobs
expected change is removal of dynamic _DSM bits from slots populated
by coldplugged bridges (something like):
- Scope (S18)
- {
- Name (ASUN, 0x03)
- Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
- {
- Local0 = Package (0x02)
- {
- BSEL,
- ASUN
- }
- Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
- }
- }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-38-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
912a5cf142 |
tests: acpi: update expected blobs
Expected change for non-populated slots is that
thay are moved after non-hotpluggable PCI tree description.
And expected change for hotplug capable populated slots is:
- ...
+ Name (BSEL, 0x03)
+ Scope (S00)
+ {
+ Name (ASUN, Zero)
+ Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
+ {
+ Local0 = Package (0x02)
+ {
+ BSEL,
+ ASUN
+ }
+ Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
+ }
[ ... other hotplug depended bits ]
+ }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-35-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
65e414a9dd |
tests: acpi: update expected blobs
previous commit added endpoint devices to bridge testcases,
which exposes extra non-hotpluggable slot in DSDT on bus where
hotplug is not available.
It should look like this (numbers may vary):
+ Device (S28)
+ {
+ Name (_ADR, 0x00050000) // _ADR: Address
+ }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-27-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
15dcfb197e |
tests: acpi: update expected blobs
Expected changes:
* pc/bridge testcase due to
("pcihp: compose PCNT callchain right before its user _GPE._E01")
...
+ Scope (\_SB.PCI0)
+ {
+ Scope (S18)
+ {
+ Scope (S08)
+ {
+ Method (PCNT, 0, NotSerialized)
+ {
+ BNUM = 0x02
+ DVNT (PCIU, One)
+ DVNT (PCID, 0x03)
+ }
+ }
Method (PCNT, 0, NotSerialized)
{
- BNUM = Zero
+ BNUM = One
DVNT (PCIU, One)
DVNT (PCID, 0x03)
- ^S18.PCNT ()
+ ^S08.PCNT ()
}
}
+
+ Method (PCNT, 0, NotSerialized)
+ {
+ BNUM = Zero
+ DVNT (PCIU, One)
+ DVNT (PCID, 0x03)
+ ^S18.PCNT ()
+ }
}
Scope (_GPE)
* due to ("pcihp: do not put empty PCNT in DSDT") in the most Q35 tests
...
{
Name (_ADR, 0x001F0003) // _ADR: Address
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
...
{
Method (_E01, 0, NotSerialized) // _Exx: Edge-Triggered GPE
{
- Acquire (\_SB.PCI0.BLCK, 0xFFFF)
- \_SB.PCI0.PCNT ()
- Release (\_SB.PCI0.BLCK)
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-24-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
54f82b6461 |
tests: acpi: update expected blobs
expected change:
Scope (PCI0)
...
Method (PCNT, 0, NotSerialized)
{
}
...
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230112140312.3096331-20-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
48dde093d3 |
tests: acpi: update expected blobs
add extra nested bridges/root ports to blobs so it would be posible to check how follow up patches would affect it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230112140312.3096331-6-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Yicong Yang
|
30f71c4afb |
tests: acpi: aarch64: Add *.topology tables
Add *.topology tables for the aarch64's topology test and empty bios-tables-test-allowed-diff.h The disassembled differences between actual and expected PPTT (the table which we actually care about): +/* + * Intel ACPI Component Architecture + * AML/ASL+ Disassembler version 20180105 (64-bit version) + * Copyright (c) 2000 - 2018 Intel Corporation + * + * Disassembly of /tmp/aml-WUN4U1, Tue Nov 1 09:51:52 2022 + * + * ACPI Data Table [PPTT] + * + * Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue + */ + +[000h 0000 4] Signature : "PPTT" [Processor Properties Topology Table] +[004h 0004 4] Table Length : 00000150 +[008h 0008 1] Revision : 02 +[009h 0009 1] Checksum : 7C +[00Ah 0010 6] Oem ID : "BOCHS " +[010h 0016 8] Oem Table ID : "BXPC " +[018h 0024 4] Oem Revision : 00000001 +[01Ch 0028 4] Asl Compiler ID : "BXPC" +[020h 0032 4] Asl Compiler Revision : 00000001 + + +[024h 0036 1] Subtable Type : 00 [Processor Hierarchy Node] +[025h 0037 1] Length : 14 +[026h 0038 2] Reserved : 0000 +[028h 0040 4] Flags (decoded below) : 00000001 + Physical package : 1 + ACPI Processor ID valid : 0 +[02Ch 0044 4] Parent : 00000000 +[030h 0048 4] ACPI Processor ID : 00000000 +[034h 0052 4] Private Resource Number : 00000000 + +[038h 0056 1] Subtable Type : 00 [Processor Hierarchy Node] +[039h 0057 1] Length : 14 +[03Ah 0058 2] Reserved : 0000 +[03Ch 0060 4] Flags (decoded below) : 00000000 + Physical package : 0 + ACPI Processor ID valid : 0 +[040h 0064 4] Parent : 00000024 +[044h 0068 4] ACPI Processor ID : 00000000 +[048h 0072 4] Private Resource Number : 00000000 + +[04Ch 0076 1] Subtable Type : 00 [Processor Hierarchy Node] +[04Dh 0077 1] Length : 14 +[04Eh 0078 2] Reserved : 0000 +[050h 0080 4] Flags (decoded below) : 00000000 + Physical package : 0 + ACPI Processor ID valid : 0 +[054h 0084 4] Parent : 00000038 +[058h 0088 4] ACPI Processor ID : 00000000 +[05Ch 0092 4] Private Resource Number : 00000000 + +[060h 0096 1] Subtable Type : 00 [Processor Hierarchy Node] +[061h 0097 1] Length : 14 +[062h 0098 2] Reserved : 0000 +[064h 0100 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[068h 0104 4] Parent : 0000004C +[06Ch 0108 4] ACPI Processor ID : 00000000 +[070h 0112 4] Private Resource Number : 00000000 + +[074h 0116 1] Subtable Type : 00 [Processor Hierarchy Node] +[075h 0117 1] Length : 14 +[076h 0118 2] Reserved : 0000 +[078h 0120 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[07Ch 0124 4] Parent : 0000004C +[080h 0128 4] ACPI Processor ID : 00000001 +[084h 0132 4] Private Resource Number : 00000000 + +[088h 0136 1] Subtable Type : 00 [Processor Hierarchy Node] +[089h 0137 1] Length : 14 +[08Ah 0138 2] Reserved : 0000 +[08Ch 0140 4] Flags (decoded below) : 00000000 + Physical package : 0 + ACPI Processor ID valid : 0 +[090h 0144 4] Parent : 00000038 +[094h 0148 4] ACPI Processor ID : 00000001 +[098h 0152 4] Private Resource Number : 00000000 + +[09Ch 0156 1] Subtable Type : 00 [Processor Hierarchy Node] +[09Dh 0157 1] Length : 14 +[09Eh 0158 2] Reserved : 0000 +[0A0h 0160 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[0A4h 0164 4] Parent : 00000088 +[0A8h 0168 4] ACPI Processor ID : 00000002 +[0ACh 0172 4] Private Resource Number : 00000000 + +[0B0h 0176 1] Subtable Type : 00 [Processor Hierarchy Node] +[0B1h 0177 1] Length : 14 +[0B2h 0178 2] Reserved : 0000 +[0B4h 0180 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[0B8h 0184 4] Parent : 00000088 +[0BCh 0188 4] ACPI Processor ID : 00000003 +[0C0h 0192 4] Private Resource Number : 00000000 + +[0C4h 0196 1] Subtable Type : 00 [Processor Hierarchy Node] +[0C5h 0197 1] Length : 14 +[0C6h 0198 2] Reserved : 0000 +[0C8h 0200 4] Flags (decoded below) : 00000000 + Physical package : 0 + ACPI Processor ID valid : 0 +[0CCh 0204 4] Parent : 00000024 +[0D0h 0208 4] ACPI Processor ID : 00000001 +[0D4h 0212 4] Private Resource Number : 00000000 + +[0D8h 0216 1] Subtable Type : 00 [Processor Hierarchy Node] +[0D9h 0217 1] Length : 14 +[0DAh 0218 2] Reserved : 0000 +[0DCh 0220 4] Flags (decoded below) : 00000000 + Physical package : 0 + ACPI Processor ID valid : 0 +[0E0h 0224 4] Parent : 000000C4 +[0E4h 0228 4] ACPI Processor ID : 00000000 +[0E8h 0232 4] Private Resource Number : 00000000 + +[0ECh 0236 1] Subtable Type : 00 [Processor Hierarchy Node] +[0EDh 0237 1] Length : 14 +[0EEh 0238 2] Reserved : 0000 +[0F0h 0240 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[0F4h 0244 4] Parent : 000000D8 +[0F8h 0248 4] ACPI Processor ID : 00000004 +[0FCh 0252 4] Private Resource Number : 00000000 + +[100h 0256 1] Subtable Type : 00 [Processor Hierarchy Node] +[101h 0257 1] Length : 14 +[102h 0258 2] Reserved : 0000 +[104h 0260 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[108h 0264 4] Parent : 000000D8 +[10Ch 0268 4] ACPI Processor ID : 00000005 +[110h 0272 4] Private Resource Number : 00000000 + +[114h 0276 1] Subtable Type : 00 [Processor Hierarchy Node] +[115h 0277 1] Length : 14 +[116h 0278 2] Reserved : 0000 +[118h 0280 4] Flags (decoded below) : 00000000 + Physical package : 0 + ACPI Processor ID valid : 0 +[11Ch 0284 4] Parent : 000000C4 +[120h 0288 4] ACPI Processor ID : 00000001 +[124h 0292 4] Private Resource Number : 00000000 + +[128h 0296 1] Subtable Type : 00 [Processor Hierarchy Node] +[129h 0297 1] Length : 14 +[12Ah 0298 2] Reserved : 0000 +[12Ch 0300 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[130h 0304 4] Parent : 00000114 +[134h 0308 4] ACPI Processor ID : 00000006 +[138h 0312 4] Private Resource Number : 00000000 + +[13Ch 0316 1] Subtable Type : 00 [Processor Hierarchy Node] +[13Dh 0317 1] Length : 14 +[13Eh 0318 2] Reserved : 0000 +[140h 0320 4] Flags (decoded below) : 0000000E + Physical package : 0 + ACPI Processor ID valid : 1 +[144h 0324 4] Parent : 00000114 +[148h 0328 4] ACPI Processor ID : 00000007 +[14Ch 0332 4] Private Resource Number : 00000000 + +Raw Table Data: Length 336 (0x150) + + 0000: 50 50 54 54 50 01 00 00 02 7C 42 4F 43 48 53 20 // PPTTP....|BOCHS + 0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC + 0020: 01 00 00 00 00 14 00 00 01 00 00 00 00 00 00 00 // ................ + 0030: 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 // ................ + 0040: 24 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00 // $............... + 0050: 00 00 00 00 38 00 00 00 00 00 00 00 00 00 00 00 // ....8........... + 0060: 00 14 00 00 0E 00 00 00 4C 00 00 00 00 00 00 00 // ........L....... + 0070: 00 00 00 00 00 14 00 00 0E 00 00 00 4C 00 00 00 // ............L... + 0080: 01 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 // ................ + 0090: 38 00 00 00 01 00 00 00 00 00 00 00 00 14 00 00 // 8............... + 00A0: 0E 00 00 00 88 00 00 00 02 00 00 00 00 00 00 00 // ................ + 00B0: 00 14 00 00 0E 00 00 00 88 00 00 00 03 00 00 00 // ................ + 00C0: 00 00 00 00 00 14 00 00 00 00 00 00 24 00 00 00 // ............$... + 00D0: 01 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 // ................ + 00E0: C4 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00 // ................ + 00F0: 0E 00 00 00 D8 00 00 00 04 00 00 00 00 00 00 00 // ................ + 0100: 00 14 00 00 0E 00 00 00 D8 00 00 00 05 00 00 00 // ................ + 0110: 00 00 00 00 00 14 00 00 00 00 00 00 C4 00 00 00 // ................ + 0120: 01 00 00 00 00 00 00 00 00 14 00 00 0E 00 00 00 // ................ + 0130: 14 01 00 00 06 00 00 00 00 00 00 00 00 14 00 00 // ................ + 0140: 0E 00 00 00 14 01 00 00 07 00 00 00 00 00 00 00 // ................ Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Message-Id: <20221229065513.55652-7-yangyicong@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Yicong Yang
|
47a86db4b4 |
tests: acpi: Add and whitelist *.topology blobs
Add and whitelist *.topology blobs, prepares for the aarch64's ACPI topology building test. Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Message-Id: <20221229065513.55652-5-yangyicong@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Yicong Yang
|
e7d0bec940 |
tests: virt: Update expected ACPI tables for virt test
Update the ACPI tables according to the acpi aml_build change, also
empty bios-tables-test-allowed-diff.h.
The disassembled differences between actual and expected PPTT:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
- * Disassembly of tests/data/acpi/virt/PPTT, Tue Nov 1 09:29:12 2022
+ * Disassembly of /tmp/aml-DIIGV1, Tue Nov 1 09:29:12 2022
*
* ACPI Data Table [PPTT]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "PPTT" [Processor Properties Topology Table]
-[004h 0004 4] Table Length : 00000060
+[004h 0004 4] Table Length : 0000004C
[008h 0008 1] Revision : 02
-[009h 0009 1] Checksum : 48
+[009h 0009 1] Checksum : A8
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 1] Subtable Type : 00 [Processor Hierarchy Node]
[025h 0037 1] Length : 14
[026h 0038 2] Reserved : 0000
[028h 0040 4] Flags (decoded below) : 00000001
Physical package : 1
ACPI Processor ID valid : 0
[02Ch 0044 4] Parent : 00000000
[030h 0048 4] ACPI Processor ID : 00000000
[034h 0052 4] Private Resource Number : 00000000
[038h 0056 1] Subtable Type : 00 [Processor Hierarchy Node]
[039h 0057 1] Length : 14
[03Ah 0058 2] Reserved : 0000
-[03Ch 0060 4] Flags (decoded below) : 00000000
+[03Ch 0060 4] Flags (decoded below) : 0000000A
Physical package : 0
- ACPI Processor ID valid : 0
+ ACPI Processor ID valid : 1
[040h 0064 4] Parent : 00000024
[044h 0068 4] ACPI Processor ID : 00000000
[048h 0072 4] Private Resource Number : 00000000
-[04Ch 0076 1] Subtable Type : 00 [Processor Hierarchy Node]
-[04Dh 0077 1] Length : 14
-[04Eh 0078 2] Reserved : 0000
-[050h 0080 4] Flags (decoded below) : 0000000A
- Physical package : 0
- ACPI Processor ID valid : 1
-[054h 0084 4] Parent : 00000038
-[058h 0088 4] ACPI Processor ID : 00000000
-[05Ch 0092 4] Private Resource Number : 00000000
-
-Raw Table Data: Length 96 (0x60)
+Raw Table Data: Length 76 (0x4C)
- 0000: 50 50 54 54 60 00 00 00 02 48 42 4F 43 48 53 20 // PPTT`....HBOCHS
+ 0000: 50 50 54 54 4C 00 00 00 02 A8 42 4F 43 48 53 20 // PPTTL.....BOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 00 14 00 00 01 00 00 00 00 00 00 00 // ................
- 0030: 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 // ................
- 0040: 24 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00 // $...............
- 0050: 0A 00 00 00 38 00 00 00 00 00 00 00 00 00 00 00 // ....8...........
+ 0030: 00 00 00 00 00 00 00 00 00 14 00 00 0A 00 00 00 // ................
+ 0040: 24 00 00 00 00 00 00 00 00 00 00 00 // $...........
PPTT.acpihmatvirt is also updated:
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
- * Disassembly of tests/data/acpi/virt/PPTT.acpihmatvirt, Wed Dec 28 15:36:06 2022
+ * Disassembly of /tmp/aml-IPKJX1, Wed Dec 28 15:36:06 2022
*
* ACPI Data Table [PPTT]
*
* Format: [HexOffset DecimalOffset ByteLength] FieldName : FieldValue
*/
[000h 0000 4] Signature : "PPTT" [Processor Properties Topology Table]
-[004h 0004 4] Table Length : 000000C4
+[004h 0004 4] Table Length : 0000009C
[008h 0008 1] Revision : 02
-[009h 0009 1] Checksum : 9E
+[009h 0009 1] Checksum : FE
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 1] Subtable Type : 00 [Processor Hierarchy Node]
[025h 0037 1] Length : 14
[026h 0038 2] Reserved : 0000
[028h 0040 4] Flags (decoded below) : 00000001
Physical package : 1
ACPI Processor ID valid : 0
[02Ch 0044 4] Parent : 00000000
[030h 0048 4] ACPI Processor ID : 00000000
[034h 0052 4] Private Resource Number : 00000000
[038h 0056 1] Subtable Type : 00 [Processor Hierarchy Node]
[039h 0057 1] Length : 14
[03Ah 0058 2] Reserved : 0000
-[03Ch 0060 4] Flags (decoded below) : 00000000
+[03Ch 0060 4] Flags (decoded below) : 0000000A
Physical package : 0
- ACPI Processor ID valid : 0
+ ACPI Processor ID valid : 1
[040h 0064 4] Parent : 00000024
[044h 0068 4] ACPI Processor ID : 00000000
[048h 0072 4] Private Resource Number : 00000000
[04Ch 0076 1] Subtable Type : 00 [Processor Hierarchy Node]
[04Dh 0077 1] Length : 14
[04Eh 0078 2] Reserved : 0000
[050h 0080 4] Flags (decoded below) : 0000000A
Physical package : 0
ACPI Processor ID valid : 1
-[054h 0084 4] Parent : 00000038
-[058h 0088 4] ACPI Processor ID : 00000000
+[054h 0084 4] Parent : 00000024
+[058h 0088 4] ACPI Processor ID : 00000001
[05Ch 0092 4] Private Resource Number : 00000000
[060h 0096 1] Subtable Type : 00 [Processor Hierarchy Node]
[061h 0097 1] Length : 14
[062h 0098 2] Reserved : 0000
-[064h 0100 4] Flags (decoded below) : 0000000A
- Physical package : 0
- ACPI Processor ID valid : 1
-[068h 0104 4] Parent : 00000038
+[064h 0100 4] Flags (decoded below) : 00000001
+ Physical package : 1
+ ACPI Processor ID valid : 0
+[068h 0104 4] Parent : 00000000
[06Ch 0108 4] ACPI Processor ID : 00000001
[070h 0112 4] Private Resource Number : 00000000
[074h 0116 1] Subtable Type : 00 [Processor Hierarchy Node]
[075h 0117 1] Length : 14
[076h 0118 2] Reserved : 0000
-[078h 0120 4] Flags (decoded below) : 00000001
- Physical package : 1
- ACPI Processor ID valid : 0
-[07Ch 0124 4] Parent : 00000000
-[080h 0128 4] ACPI Processor ID : 00000001
+[078h 0120 4] Flags (decoded below) : 0000000A
+ Physical package : 0
+ ACPI Processor ID valid : 1
+[07Ch 0124 4] Parent : 00000060
+[080h 0128 4] ACPI Processor ID : 00000002
[084h 0132 4] Private Resource Number : 00000000
[088h 0136 1] Subtable Type : 00 [Processor Hierarchy Node]
[089h 0137 1] Length : 14
[08Ah 0138 2] Reserved : 0000
-[08Ch 0140 4] Flags (decoded below) : 00000000
- Physical package : 0
- ACPI Processor ID valid : 0
-[090h 0144 4] Parent : 00000074
-[094h 0148 4] ACPI Processor ID : 00000000
-[098h 0152 4] Private Resource Number : 00000000
-
-[09Ch 0156 1] Subtable Type : 00 [Processor Hierarchy Node]
-[09Dh 0157 1] Length : 14
-[09Eh 0158 2] Reserved : 0000
-[0A0h 0160 4] Flags (decoded below) : 0000000A
- Physical package : 0
- ACPI Processor ID valid : 1
-[0A4h 0164 4] Parent : 00000088
-[0A8h 0168 4] ACPI Processor ID : 00000002
-[0ACh 0172 4] Private Resource Number : 00000000
-
-[0B0h 0176 1] Subtable Type : 00 [Processor Hierarchy Node]
-[0B1h 0177 1] Length : 14
-[0B2h 0178 2] Reserved : 0000
-[0B4h 0180 4] Flags (decoded below) : 0000000A
+[08Ch 0140 4] Flags (decoded below) : 0000000A
Physical package : 0
ACPI Processor ID valid : 1
-[0B8h 0184 4] Parent : 00000088
-[0BCh 0188 4] ACPI Processor ID : 00000003
-[0C0h 0192 4] Private Resource Number : 00000000
+[090h 0144 4] Parent : 00000060
+[094h 0148 4] ACPI Processor ID : 00000003
+[098h 0152 4] Private Resource Number : 00000000
-Raw Table Data: Length 196 (0xC4)
+Raw Table Data: Length 156 (0x9C)
- 0000: 50 50 54 54 C4 00 00 00 02 9E 42 4F 43 48 53 20 // PPTT......BOCHS
+ 0000: 50 50 54 54 9C 00 00 00 02 FE 42 4F 43 48 53 20 // PPTT......BOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 00 14 00 00 01 00 00 00 00 00 00 00 // ................
- 0030: 00 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 // ................
+ 0030: 00 00 00 00 00 00 00 00 00 14 00 00 0A 00 00 00 // ................
0040: 24 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00 // $...............
- 0050: 0A 00 00 00 38 00 00 00 00 00 00 00 00 00 00 00 // ....8...........
- 0060: 00 14 00 00 0A 00 00 00 38 00 00 00 01 00 00 00 // ........8.......
- 0070: 00 00 00 00 00 14 00 00 01 00 00 00 00 00 00 00 // ................
- 0080: 01 00 00 00 00 00 00 00 00 14 00 00 00 00 00 00 // ................
- 0090: 74 00 00 00 00 00 00 00 00 00 00 00 00 14 00 00 // t...............
- 00A0: 0A 00 00 00 88 00 00 00 02 00 00 00 00 00 00 00 // ................
- 00B0: 00 14 00 00 0A 00 00 00 88 00 00 00 03 00 00 00 // ................
- 00C0: 00 00 00 00 // ....
+ 0050: 0A 00 00 00 24 00 00 00 01 00 00 00 00 00 00 00 // ....$...........
+ 0060: 00 14 00 00 01 00 00 00 00 00 00 00 01 00 00 00 // ................
+ 0070: 00 00 00 00 00 14 00 00 0A 00 00 00 60 00 00 00 // ............`...
+ 0080: 02 00 00 00 00 00 00 00 00 14 00 00 0A 00 00 00 // ................
+ 0090: 60 00 00 00 03 00 00 00 00 00 00 00 // `...........
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Message-Id: <20221229065513.55652-4-yangyicong@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
83afb1409f |
tests: acpi: x86: update expected DSDT after moving PRQx fields in _SB scope
Expected DSDT changes,
pc:
- Field (P40C, ByteAcc, NoLock, Preserve)
+ Scope (\_SB)
{
- PRQ0, 8,
- PRQ1, 8,
- PRQ2, 8,
- PRQ3, 8
+ Field (PCI0.S08.P40C, ByteAcc, NoLock, Preserve)
+ {
+ PRQ0, 8,
+ PRQ1, 8,
+ PRQ2, 8,
+ PRQ3, 8
+ }
}
- Alias (PRQ0, \_SB.PRQ0)
- Alias (PRQ1, \_SB.PRQ1)
- Alias (PRQ2, \_SB.PRQ2)
- Alias (PRQ3, \_SB.PRQ3)
q35:
- Field (PIRQ, ByteAcc, NoLock, Preserve)
- {
- PRQA, 8,
- PRQB, 8,
- PRQC, 8,
- PRQD, 8,
- Offset (0x08),
- PRQE, 8,
- PRQF, 8,
- PRQG, 8,
- PRQH, 8
+ Scope (\_SB)
+ {
+ Field (PCI0.SF8.PIRQ, ByteAcc, NoLock, Preserve)
+ {
+ PRQA, 8,
+ PRQB, 8,
+ PRQC, 8,
+ PRQD, 8,
+ Offset (0x08),
+ PRQE, 8,
+ PRQF, 8,
+ PRQG, 8,
+ PRQH, 8
+ }
}
- Alias (PRQA, \_SB.PRQA)
- Alias (PRQB, \_SB.PRQB)
- Alias (PRQC, \_SB.PRQC)
- Alias (PRQD, \_SB.PRQD)
- Alias (PRQE, \_SB.PRQE)
- Alias (PRQF, \_SB.PRQF)
- Alias (PRQG, \_SB.PRQG)
- Alias (PRQH, \_SB.PRQH)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221121153613.3972225-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Julia Suvorova
|
b22fbc5bcb |
tests/acpi: update tables for new core count test
Changes in the tables (for 275 cores):
FACP:
+ Use APIC Cluster Model (V4) : 1
APIC:
+[02Ch 0044 1] Subtable Type : 00 [Processor Local APIC]
+[02Dh 0045 1] Length : 08
+[02Eh 0046 1] Processor ID : 00
+[02Fh 0047 1] Local Apic ID : 00
+[030h 0048 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
...
+
+[81Ch 2076 1] Subtable Type : 00 [Processor Local APIC]
+[81Dh 2077 1] Length : 08
+[81Eh 2078 1] Processor ID : FE
+[81Fh 2079 1] Local Apic ID : FE
+[820h 2080 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+ Runtime Online Capable : 0
+
+[824h 2084 1] Subtable Type : 09 [Processor Local x2APIC]
+[825h 2085 1] Length : 10
+[826h 2086 2] Reserved : 0000
+[828h 2088 4] Processor x2Apic ID : 000000FF
+[82Ch 2092 4] Flags (decoded below) : 00000001
+ Processor Enabled : 1
+[830h 2096 4] Processor UID : 000000FF
...
DSDT:
+ Processor (C001, 0x01, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (One))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (One)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (One, Arg0, Arg1, Arg2)
+ }
+ }
...
+ Processor (C0FE, 0xFE, 0x00000000, 0x00)
+ {
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0xFE))
+ }
+
+ Name (_MAT, Buffer (0x08) // _MAT: Multiple APIC Table Entry
+ {
+ 0x00, 0x08, 0xFE, 0xFE, 0x01, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0xFE)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0xFE, Arg0, Arg1, Arg2)
+ }
+ }
+
+ Device (C0FF)
+ {
+ Name (_HID, "ACPI0007" /* Processor Device */) // _HID: Hardware ID
+ Name (_UID, 0xFF) // _UID: Unique ID
+ Method (_STA, 0, Serialized) // _STA: Status
+ {
+ Return (CSTA (0xFF))
+ }
+
+ Name (_MAT, Buffer (0x10) // _MAT: Multiple APIC Table Entry
+ {
+ /* 0000 */ 0x09, 0x10, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, // ........
+ /* 0008 */ 0x01, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00 // ........
+ })
+ Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device, x=0-9
+ {
+ CEJ0 (0xFF)
+ }
+
+ Method (_OST, 3, Serialized) // _OST: OSPM Status Indication
+ {
+ COST (0xFF, Arg0, Arg1, Arg2)
+ }
+ }
+
...
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20220731162141.178443-6-jusual@redhat.com>
Message-Id: <20221011111731.101412-6-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Julia Suvorova
|
159a0da5b0 |
tests/acpi: allow changes for core_count2 test
Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20220731162141.178443-4-jusual@redhat.com> Message-Id: <20221011111731.101412-4-jusual@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> |
||
|
Hesham Almatary
|
be3afe8151 |
tests: virt: Update expected *.acpihmatvirt tables
* Expected ACPI Data Table [HMAT]
[000h 0000 4] Signature : "HMAT" [Heterogeneous
Memory Attributes Table]
[004h 0004 4] Table Length : 00000120
[008h 0008 1] Revision : 02
[009h 0009 1] Checksum : 4F
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 4] Reserved : 00000000
[028h 0040 2] Structure Type : 0000 [Memory Proximity
Domain Attributes]
[02Ah 0042 2] Reserved : 0000
[02Ch 0044 4] Length : 00000028
[030h 0048 2] Flags (decoded below) : 0001
Processor Proximity Domain Valid : 1
[032h 0050 2] Reserved1 : 0000
[034h 0052 4] Processor Proximity Domain : 00000000
[038h 0056 4] Memory Proximity Domain : 00000000
[03Ch 0060 4] Reserved2 : 00000000
[040h 0064 8] Reserved3 : 0000000000000000
[048h 0072 8] Reserved4 : 0000000000000000
[050h 0080 2] Structure Type : 0000 [Memory Proximity
Domain Attributes]
[052h 0082 2] Reserved : 0000
[054h 0084 4] Length : 00000028
[058h 0088 2] Flags (decoded below) : 0001
Processor Proximity Domain Valid : 1
[05Ah 0090 2] Reserved1 : 0000
[05Ch 0092 4] Processor Proximity Domain : 00000001
[060h 0096 4] Memory Proximity Domain : 00000001
[064h 0100 4] Reserved2 : 00000000
[068h 0104 8] Reserved3 : 0000000000000000
[070h 0112 8] Reserved4 : 0000000000000000
[078h 0120 2] Structure Type : 0000 [Memory Proximity
Domain Attributes]
[07Ah 0122 2] Reserved : 0000
[07Ch 0124 4] Length : 00000028
[080h 0128 2] Flags (decoded below) : 0000
Processor Proximity Domain Valid : 0
[082h 0130 2] Reserved1 : 0000
[084h 0132 4] Processor Proximity Domain : 00000080
[088h 0136 4] Memory Proximity Domain : 00000002
[08Ch 0140 4] Reserved2 : 00000000
[040h 0064 8] Reserved3 : 0000000000000000
[048h 0072 8] Reserved4 : 0000000000000000
[050h 0080 2] Structure Type : 0000 [Memory Proximity
Domain Attributes]
[052h 0082 2] Reserved : 0000
[054h 0084 4] Length : 00000028
[058h 0088 2] Flags (decoded below) : 0001
Processor Proximity Domain Valid : 1
[05Ah 0090 2] Reserved1 : 0000
[05Ch 0092 4] Processor Proximity Domain : 00000001
[060h 0096 4] Memory Proximity Domain : 00000001
[064h 0100 4] Reserved2 : 00000000
[068h 0104 8] Reserved3 : 0000000000000000
[070h 0112 8] Reserved4 : 0000000000000000
[078h 0120 2] Structure Type : 0000 [Memory Proximity
Domain Attributes]
[07Ah 0122 2] Reserved : 0000
[07Ch 0124 4] Length : 00000028
[080h 0128 2] Flags (decoded below) : 0000
Processor Proximity Domain Valid : 0
[082h 0130 2] Reserved1 : 0000
[084h 0132 4] Processor Proximity Domain : 00000080
[088h 0136 4] Memory Proximity Domain : 00000002
[08Ch 0140 4] Reserved2 : 00000000
[090h 0144 8] Reserved3 : 0000000000000000
[098h 0152 8] Reserved4 : 0000000000000000
[0A0h 0160 2] Structure Type : 0001 [System Locality
Latency and Bandwidth Information]
[0A2h 0162 2] Reserved : 0000
[0A4h 0164 4] Length : 00000040
[0A8h 0168 1] Flags (decoded below) : 00
Memory Hierarchy : 0
[0A9h 0169 1] Data Type : 00
[0AAh 0170 2] Reserved1 : 0000
[0ACh 0172 4] Initiator Proximity Domains # : 00000002
[0B0h 0176 4] Target Proximity Domains # : 00000003
[0B4h 0180 4] Reserved2 : 00000000
[0B8h 0184 8] Entry Base Unit : 0000000000002710
[0C0h 0192 4] Initiator Proximity Domain List : 00000000
[0C4h 0196 4] Initiator Proximity Domain List : 00000001
[0C8h 0200 4] Target Proximity Domain List : 00000000
[0CCh 0204 4] Target Proximity Domain List : 00000001
[0D0h 0208 4] Target Proximity Domain List : 00000002
[0D4h 0212 2] Entry : 0001
[0D6h 0214 2] Entry : 0002
[0D8h 0216 2] Entry : 0003
[0DAh 0218 2] Entry : 0002
[0DCh 0220 2] Entry : 0001
[0DEh 0222 2] Entry : 0003
[0E0h 0224 2] Structure Type : 0001 [System Locality
Latency and Bandwidth Information]
[0E2h 0226 2] Reserved : 0000
[0E4h 0228 4] Length : 00000040
[0E8h 0232 1] Flags (decoded below) : 00
Memory Hierarchy : 0
[0E9h 0233 1] Data Type : 03
[0EAh 0234 2] Reserved1 : 0000
[0ECh 0236 4] Initiator Proximity Domains # : 00000002
[0F0h 0240 4] Target Proximity Domains # : 00000003
[0F4h 0244 4] Reserved2 : 00000000
[0F8h 0248 8] Entry Base Unit : 0000000000000001
[100h 0256 4] Initiator Proximity Domain List : 00000000
[104h 0260 4] Initiator Proximity Domain List : 00000001
[108h 0264 4] Target Proximity Domain List : 00000000
[10Ch 0268 4] Target Proximity Domain List : 00000001
[110h 0272 4] Target Proximity Domain List : 00000002
[114h 0276 2] Entry : 000A
[116h 0278 2] Entry : 0005
[118h 0280 2] Entry : 0001
[11Ah 0282 2] Entry : 0005
[11Ch 0284 2] Entry : 000A
[11Eh 0286 2] Entry : 0001
Raw Table Data: Length 288 (0x120)
0000: 48 4D 41 54 20 01 00 00 02 4F 42 4F 43 48 53 20 // HMAT
....OBOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC
....BXPC
0020: 01 00 00 00 00 00 00 00 00 00 00 00 28 00 00 00 //
............(...
0030: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 //
................
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 //
................
0050: 00 00 00 00 28 00 00 00 01 00 00 00 01 00 00 00 //
....(...........
0060: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 //
................
0070: 00 00 00 00 00 00 00 00 00 00 00 00 28 00 00 00 //
............(...
0080: 00 00 00 00 80 00 00 00 02 00 00 00 00 00 00 00 //
................
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 //
................
00A0: 01 00 00 00 40 00 00 00 00 00 00 00 02 00 00 00 //
....@...........
00B0: 03 00 00 00 00 00 00 00 10 27 00 00 00 00 00 00 //
.........'......
00C0: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 //
................
00D0: 02 00 00 00 01 00 02 00 03 00 02 00 01 00 03 00 //
................
00E0: 01 00 00 00 40 00 00 00 00 03 00 00 02 00 00 00 //
....@...........
00F0: 03 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 //
................
0100: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 //
................
0110: 02 00 00 00 0A 00 05 00 01 00 05 00 0A 00 01 00 //
................
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-9-hesham.almatary@huawei.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Hesham Almatary
|
cfb4c059c6 |
tests: Add HMAT AArch64/virt empty table files
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Message-Id: <20221027100037.251-6-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Brice Goglin
|
84c35b5ff2 |
tests: acpi: q35: update expected blobs *.hmat-noinitiators expected HMAT:
[000h 0000 4] Signature : "HMAT" [Heterogeneous Memory Attributes Table]
[004h 0004 4] Table Length : 00000120
[008h 0008 1] Revision : 02
[009h 0009 1] Checksum : 4F
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
[024h 0036 4] Reserved : 00000000
[028h 0040 2] Structure Type : 0000 [Memory Proximity Domain Attributes]
[02Ah 0042 2] Reserved : 0000
[02Ch 0044 4] Length : 00000028
[030h 0048 2] Flags (decoded below) : 0001
Processor Proximity Domain Valid : 1
[032h 0050 2] Reserved1 : 0000
[034h 0052 4] Attached Initiator Proximity Domain : 00000000
[038h 0056 4] Memory Proximity Domain : 00000000
[03Ch 0060 4] Reserved2 : 00000000
[040h 0064 8] Reserved3 : 0000000000000000
[048h 0072 8] Reserved4 : 0000000000000000
[050h 0080 2] Structure Type : 0000 [Memory Proximity Domain Attributes]
[052h 0082 2] Reserved : 0000
[054h 0084 4] Length : 00000028
[058h 0088 2] Flags (decoded below) : 0001
Processor Proximity Domain Valid : 1
[05Ah 0090 2] Reserved1 : 0000
[05Ch 0092 4] Attached Initiator Proximity Domain : 00000001
[060h 0096 4] Memory Proximity Domain : 00000001
[064h 0100 4] Reserved2 : 00000000
[068h 0104 8] Reserved3 : 0000000000000000
[070h 0112 8] Reserved4 : 0000000000000000
[078h 0120 2] Structure Type : 0000 [Memory Proximity Domain Attributes]
[07Ah 0122 2] Reserved : 0000
[07Ch 0124 4] Length : 00000028
[080h 0128 2] Flags (decoded below) : 0000
Processor Proximity Domain Valid : 0
[082h 0130 2] Reserved1 : 0000
[084h 0132 4] Attached Initiator Proximity Domain : 00000080
[088h 0136 4] Memory Proximity Domain : 00000002
[08Ch 0140 4] Reserved2 : 00000000
[090h 0144 8] Reserved3 : 0000000000000000
[098h 0152 8] Reserved4 : 0000000000000000
[0A0h 0160 2] Structure Type : 0001 [System Locality Latency and Bandwidth Information]
[0A2h 0162 2] Reserved : 0000
[0A4h 0164 4] Length : 00000040
[0A8h 0168 1] Flags (decoded below) : 00
Memory Hierarchy : 0
[0A9h 0169 1] Data Type : 00
[0AAh 0170 2] Reserved1 : 0000
[0ACh 0172 4] Initiator Proximity Domains # : 00000002
[0B0h 0176 4] Target Proximity Domains # : 00000003
[0B4h 0180 4] Reserved2 : 00000000
[0B8h 0184 8] Entry Base Unit : 0000000000002710
[0C0h 0192 4] Initiator Proximity Domain List : 00000000
[0C4h 0196 4] Initiator Proximity Domain List : 00000001
[0C8h 0200 4] Target Proximity Domain List : 00000000
[0CCh 0204 4] Target Proximity Domain List : 00000001
[0D0h 0208 4] Target Proximity Domain List : 00000002
[0D4h 0212 2] Entry : 0001
[0D6h 0214 2] Entry : 0002
[0D8h 0216 2] Entry : 0003
[0DAh 0218 2] Entry : 0002
[0DCh 0220 2] Entry : 0001
[0DEh 0222 2] Entry : 0003
[0E0h 0224 2] Structure Type : 0001 [System Locality Latency and Bandwidth Information]
[0E2h 0226 2] Reserved : 0000
[0E4h 0228 4] Length : 00000040
[0E8h 0232 1] Flags (decoded below) : 00
Memory Hierarchy : 0
[0E9h 0233 1] Data Type : 03
[0EAh 0234 2] Reserved1 : 0000
[0ECh 0236 4] Initiator Proximity Domains # : 00000002
[0F0h 0240 4] Target Proximity Domains # : 00000003
[0F4h 0244 4] Reserved2 : 00000000
[0F8h 0248 8] Entry Base Unit : 0000000000000001
[100h 0256 4] Initiator Proximity Domain List : 00000000
[104h 0260 4] Initiator Proximity Domain List : 00000001
[108h 0264 4] Target Proximity Domain List : 00000000
[10Ch 0268 4] Target Proximity Domain List : 00000001
[110h 0272 4] Target Proximity Domain List : 00000002
[114h 0276 2] Entry : 000A
[116h 0278 2] Entry : 0005
[118h 0280 2] Entry : 0001
[11Ah 0282 2] Entry : 0005
[11Ch 0284 2] Entry : 000A
[11Eh 0286 2] Entry : 0001
Raw Table Data: Length 288 (0x120)
0000: 48 4D 41 54 20 01 00 00 02 4F 42 4F 43 48 53 20 // HMAT ....OBOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 00 00 00 00 00 00 00 00 28 00 00 00 // ............(...
0030: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0050: 00 00 00 00 28 00 00 00 01 00 00 00 01 00 00 00 // ....(...........
0060: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0070: 00 00 00 00 00 00 00 00 00 00 00 00 28 00 00 00 // ............(...
0080: 00 00 00 00 80 00 00 00 02 00 00 00 00 00 00 00 // ................
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
00A0: 01 00 00 00 40 00 00 00 00 00 00 00 02 00 00 00 // ....@...........
00B0: 03 00 00 00 00 00 00 00 10 27 00 00 00 00 00 00 // .........'......
00C0: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 // ................
00D0: 02 00 00 00 01 00 02 00 03 00 02 00 01 00 03 00 // ................
00E0: 01 00 00 00 40 00 00 00 00 03 00 00 02 00 00 00 // ....@...........
00F0: 03 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 // ................
0100: 00 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 // ................
0110: 02 00 00 00 0A 00 05 00 01 00 05 00 0A 00 01 00 // ................
Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com>
Message-Id: <20221027100037.251-5-hesham.almatary@huawei.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Brice Goglin
|
e7cb1ce249 |
tests: acpi: add and whitelist *.hmat-noinitiator expected blobs
.. which will be used by follow up hmat-noinitiator test-case. Signed-off-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Hesham Almatary <hesham.almatary@huawei.com> Message-Id: <20221027100037.251-3-hesham.almatary@huawei.com> Tested-by: Yicong Yang <yangyicong@hisilicon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
0193d693a9 |
tests: acpi: update expected blobs
Expected changes are:
1) Moving _GPE scope declaration achec of all _E0x methods
+ Scope (_GPE)
+ {
+ Name (_HID, "ACPI0006" /* GPE Block Device */) // _HID: Hardware ID
+ }
+
Scope (_SB)
{
Device (\_SB.PCI0.PRES)
============
\_SB.CPUS.CSCN ()
}
- Scope (_GPE)
- {
- Name (_HID, "ACPI0006" /* GPE Block Device */) // _HID: Hardware ID
- }
2) Moving _E01 handler after PCI0 scope is defined
- Scope (_GPE)
- {
- Name (_HID, "ACPI0006" /* GPE Block Device */) // _HID: Hardware ID
- Method (_E01, 0, NotSerialized) // _Exx: Edge-Triggered GPE
- {
- Acquire (\_SB.PCI0.BLCK, 0xFFFF)
- \_SB.PCI0.PCNT ()
- Release (\_SB.PCI0.BLCK)
- }
- }
-
Scope (\_SB.PCI0)
{
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
=============
}
}
}
+
+ Scope (_GPE)
+ {
+ Method (_E01, 0, NotSerialized) // _Exx: Edge-Triggered GPE
+ {
+ Acquire (\_SB.PCI0.BLCK, 0xFFFF)
+ \_SB.PCI0.PCNT ()
+ Release (\_SB.PCI0.BLCK)
+ }
+ }
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-12-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
5aaa1e1006 |
tests: acpi: update expected blobs
Expected change in q35 tests:
@@ -2797,14 +2797,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
}
}
- Scope (_SB.PCI0)
- {
- Device (SMB0)
- {
- Name (_ADR, 0x001F0003) // _ADR: Address
- }
- }
-
Scope (_SB)
{
Device (HPET)
@@ -3282,6 +3274,11 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
}
}
+ Device (SFB)
+ {
+ Name (_ADR, 0x001F0003) // _ADR: Address
+ }
+
Method (PCNT, 0, NotSerialized)
{
}
Also for ipmismbus test, child 'Device (MI1)' of SMB0 will be moved along with it
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
fd4f2ae8ec |
tests: acpi: update expected DSDT after ISA bridge is moved directly under PCI host bridge
example of the change for PC machine with hotplug disabled on root buss (no BSEL case):
- Field (PCI0.ISA.P40C, ByteAcc, NoLock, Preserve)
+ Field (S08.P40C, ByteAcc, NoLock, Preserve)
===
- Scope (_SB.PCI0)
- {
- Device (ISA)
- {
- Name (_ADR, 0x00010000) // _ADR: Address
- OperationRegion (P40C, PCI_Config, 0x60, 0x04)
...
- }
- }
-
Scope (_SB)
===
+ Device (S08)
+ {
+ Name (_ADR, 0x00010000) // _ADR: Address
+ OperationRegion (P40C, PCI_Config, 0x60, 0x04)
...
+ }
+
Device (S10)
{
Name (_ADR, 0x00020000) // _ADR: Address
with hotplug enabled on root bus (i.e. bus has BSEL configured),
a following addtional entries will be seen:
+ Name (ASUN, One)
+ Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
+ {
+ Local0 = Package (0x02)
+ {
+ BSEL,
+ ASUN
+ }
+ Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
+ }
similar changes are expected for Q35 modulo:
- Field (PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve)
+ Field (SF8.PIRQ, ByteAcc, NoLock, Preserve)
and bridge address
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20221017102146.2254096-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Miguel Luis
|
535824f596 |
tests/acpi: virt: update ACPI MADT and FADT binaries
Step 6 & 7 of the bios-tables-test.c documented procedure.
Differences between disassembled ASL files for MADT:
@@ -11,9 +11,9 @@
*/
[000h 0000 4] Signature : "APIC" [Multiple APIC Description Table (MADT)]
-[004h 0004 4] Table Length : 000000A8
-[008h 0008 1] Revision : 03
-[009h 0009 1] Checksum : 50
+[004h 0004 4] Table Length : 000000AC
+[008h 0008 1] Revision : 04
+[009h 0009 1] Checksum : 47
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
@@ -34,7 +34,7 @@
[041h 0065 3] Reserved : 000000
[044h 0068 1] Subtable Type : 0B [Generic Interrupt Controller]
-[045h 0069 1] Length : 4C
+[045h 0069 1] Length : 50
[046h 0070 2] Reserved : 0000
[048h 0072 4] CPU Interface Number : 00000000
[04Ch 0076 4] Processor UID : 00000000
@@ -51,28 +51,29 @@
[07Ch 0124 4] Virtual GIC Interrupt : 00000000
[080h 0128 8] Redistributor Base Address : 0000000000000000
[088h 0136 8] ARM MPIDR : 0000000000000000
-/**** ACPI subtable terminates early - may be older version (dump table) */
+[090h 0144 1] Efficiency Class : 00
+[091h 0145 3] Reserved : 000000
-[090h 0144 1] Subtable Type : 0D [Generic MSI Frame]
-[091h 0145 1] Length : 18
-[092h 0146 2] Reserved : 0000
-[094h 0148 4] MSI Frame ID : 00000000
-[098h 0152 8] Base Address : 0000000008020000
-[0A0h 0160 4] Flags (decoded below) : 00000001
+[094h 0148 1] Subtable Type : 0D [Generic MSI Frame]
+[095h 0149 1] Length : 18
+[096h 0150 2] Reserved : 0000
+[098h 0152 4] MSI Frame ID : 00000000
+[09Ch 0156 8] Base Address : 0000000008020000
+[0A4h 0164 4] Flags (decoded below) : 00000001
Select SPI : 1
-[0A4h 0164 2] SPI Count : 0040
-[0A6h 0166 2] SPI Base : 0050
+[0A8h 0168 2] SPI Count : 0040
+[0AAh 0170 2] SPI Base : 0050
-Raw Table Data: Length 168 (0xA8)
+Raw Table Data: Length 172 (0xAC)
- 0000: 41 50 49 43 A8 00 00 00 03 50 42 4F 43 48 53 20 // APIC.....PBOCHS
+ 0000: 41 50 49 43 AC 00 00 00 04 47 42 4F 43 48 53 20 // APIC.....GBOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 00 00 00 00 00 00 00 00 0C 18 00 00 // ................
0030: 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 00 // ................
- 0040: 02 00 00 00 0B 4C 00 00 00 00 00 00 00 00 00 00 // .....L..........
+ 0040: 02 00 00 00 0B 50 00 00 00 00 00 00 00 00 00 00 // .....P..........
0050: 01 00 00 00 00 00 00 00 17 00 00 00 00 00 00 00 // ................
0060: 00 00 00 00 00 00 01 08 00 00 00 00 00 00 04 08 // ................
0070: 00 00 00 00 00 00 03 08 00 00 00 00 00 00 00 00 // ................
0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
- 0090: 0D 18 00 00 00 00 00 00 00 00 02 08 00 00 00 00 // ................
- 00A0: 01 00 00 00 40 00 50 00 // ....@.P.
+ 0090: 00 00 00 00 0D 18 00 00 00 00 00 00 00 00 02 08 // ................
+ 00A0: 00 00 00 00 01 00 00 00 40 00 50 00 // ........@.P.
Differences between disassembled ASL files for FADT:
@@ -11,9 +11,9 @@
*/
[000h 0000 4] Signature : "FACP" [Fixed ACPI Description Table (FADT)]
-[004h 0004 4] Table Length : 0000010C
-[008h 0008 1] Revision : 05
-[009h 0009 1] Checksum : 55
+[004h 0004 4] Table Length : 00000114
+[008h 0008 1] Revision : 06
+[009h 0009 1] Checksum : 15
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
@@ -99,7 +99,7 @@
PSCI Compliant : 1
Must use HVC for PSCI : 1
-[083h 0131 1] FADT Minor Revision : 01
+[083h 0131 1] FADT Minor Revision : 00
[084h 0132 8] FACS Address : 0000000000000000
[08Ch 0140 8] DSDT Address : 0000000000000000
[094h 0148 12] PM1A Event Block : [Generic Address Structure]
@@ -173,11 +173,11 @@
[103h 0259 1] Encoded Access Width : 00 [Undefined/Legacy]
[104h 0260 8] Address : 0000000000000000
-/**** ACPI table terminates in the middle of a data structure! (dump table) */
+[10Ch 0268 8] Hypervisor ID : 00000000554D4551
-Raw Table Data: Length 268 (0x10C)
+Raw Table Data: Length 276 (0x114)
- 0000: 46 41 43 50 0C 01 00 00 05 55 42 4F 43 48 53 20 // FACP.....UBOCHS
+ 0000: 46 41 43 50 14 01 00 00 06 15 42 4F 43 48 53 20 // FACP......BOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
@@ -185,7 +185,7 @@ Raw Table Data: Length 268 (0x10C)
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0070: 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
- 0080: 00 03 00 01 00 00 00 00 00 00 00 00 00 00 00 00 // ................
+ 0080: 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
@@ -193,4 +193,5 @@ Raw Table Data: Length 268 (0x10C)
00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
- 0100: 00 00 00 00 00 00 00 00 00 00 00 00 // ............
+ 0100: 00 00 00 00 00 00 00 00 00 00 00 00 51 45 4D 55 // ............QEMU
+ 0110: 00 00 00 00 // ....
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20221011181730.10885-5-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
|
||
|
Robert Hoo
|
a023c4b2e7 |
test/acpi/bios-tables-test: SSDT: update golden master binaries
And empty bios-tables-test-allowed-diff.h.
Diff of ASL form, from qtest testlog.txt:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180629 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/pc/SSDT.dimmpxm, Thu Sep 22 18:25:06 2022
+ * Disassembly of /tmp/aml-YYZZS1, Thu Sep 22 18:25:06 2022
*
* Original Table Header:
* Signature "SSDT"
- * Length 0x000002DE (734)
+ * Length 0x00000717 (1815)
* Revision 0x01
- * Checksum 0x56
+ * Checksum 0xBC
* OEM ID "BOCHS "
* OEM Table ID "NVDIMM"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "SSDT", 1, "BOCHS ", "NVDIMM", 0x00000001)
{
Scope (\_SB)
{
Device (NVDR)
{
Name (_HID, "ACPI0012" /* NVDIMM Root Device */) // _HID: Hardware ID
Method (NCAL, 5, Serialized)
{
Local6 = MEMA /* \MEMA */
@@ -49,52 +49,52 @@
ODAT, 32736
}
If ((Arg4 == Zero))
{
Local0 = ToUUID ("2f10e7a4-9e91-11e4-89d3-123b93f75cba")
}
ElseIf ((Arg4 == 0x00010000))
{
Local0 = ToUUID ("648b9cf2-cda1-4312-8ad9-49c4af32bd62")
}
Else
{
Local0 = ToUUID ("4309ac30-0d11-11e4-9191-0800200c9a66")
}
- If (((Local6 == Zero) | (Arg0 != Local0)))
+ If (((Local6 == Zero) || (Arg0 != Local0)))
{
If ((Arg2 == Zero))
{
Return (Buffer (One)
{
0x00 // .
})
}
Return (Buffer (One)
{
0x01 // .
})
}
HDLE = Arg4
REVS = Arg1
FUNC = Arg2
- If (((ObjectType (Arg3) == 0x04) & (SizeOf (Arg3) == One)))
+ If (((ObjectType (Arg3) == 0x04) && (SizeOf (Arg3) == One)))
{
Local2 = Arg3 [Zero]
Local3 = DerefOf (Local2)
FARG = Local3
}
NTFI = Local6
Local1 = (RLEN - 0x04)
If ((Local1 < 0x08))
{
Local2 = Zero
Name (TBUF, Buffer (One)
{
0x00 // .
})
Local7 = Buffer (Zero){}
@@ -161,45 +161,234 @@
Else
{
If ((Local1 == Zero))
{
Return (Local2)
}
Local3 += Local1
Concatenate (Local2, Local0, Local2)
}
}
}
Device (NV00)
{
Name (_ADR, One) // _ADR: Address
+ Method (_LSI, 0, Serialized) // _LSI: Label Storage Information
+ {
+ Local0 = NCAL (ToUUID ("4309ac30-0d11-11e4-9191-0800200c9a66"), One, 0x04, Zero, One)
+ CreateDWordField (Local0, Zero, STTS)
+ CreateDWordField (Local0, 0x04, SLSA)
+ CreateDWordField (Local0, 0x08, MAXT)
+ Local1 = Package (0x03)
+ {
+ STTS,
+ SLSA,
+ MAXT
+ }
+ Return (Local1)
+ }
+
+ Method (_LSR, 2, Serialized) // _LSR: Label Storage Read
+ {
+ Name (INPT, Buffer (0x08)
+ {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // ........
+ })
+ CreateDWordField (INPT, Zero, OFST)
+ CreateDWordField (INPT, 0x04, LEN)
+ OFST = Arg0
+ LEN = Arg1
+ Local0 = Package (0x01)
+ {
+ INPT
+ }
+ Local3 = NCAL (ToUUID ("4309ac30-0d11-11e4-9191-0800200c9a66"), One, 0x05, Local0, One)
+ CreateDWordField (Local3, Zero, STTS)
+ CreateField (Local3, 0x20, (LEN << 0x03), LDAT)
+ Name (LSA, Buffer (Zero){})
+ ToBuffer (LDAT, LSA) /* \_SB_.NVDR.NV00._LSR.LSA_ */
+ Local1 = Package (0x02)
+ {
+ STTS,
+ LSA
+ }
+ Return (Local1)
+ }
+
+ Method (_LSW, 3, Serialized) // _LSW: Label Storage Write
+ {
+ Local2 = Arg2
+ Name (INPT, Buffer (0x08)
+ {
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // ........
+ })
+ CreateDWordField (INPT, Zero, OFST)
+ CreateDWordField (INPT, 0x04, TLEN)
+ OFST = Arg0
+ TLEN = Arg1
+ Concatenate (INPT, Local2, INPT) /* \_SB_.NVDR.NV00._LSW.INPT */
+ Local0 = Package (0x01)
+ {
+ INPT
+ }
+ Local3 = NCAL (ToUUID ("4309ac30-0d11-11e4-9191-0800200c9a66"), One, 0x06, Local0, One)
+ CreateDWordField (Local3, Zero, STTS)
+ Return (STTS) /* \_SB_.NVDR.NV00._LSW.STTS */
+ }
+
(iterates in each NV)
Message-Id: <20220922122155.1326543-6-robert.hu@linux.intel.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
1ccd222094 |
tests: acpi: update expected blobs
Expected change:
+ Device (SE8)
+ {
+ Name (_ADR, 0x001D0000) // _ADR: Address
+ Name (ASUN, 0x1D)
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
Local0 = Package (0x02)
{
BSEL,
ASUN
}
Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
}
- }
- Device (SE8)
- {
- Name (_ADR, 0x001D0000) // _ADR: Address
- Name (ASUN, 0x1D)
Name (_SUN, 0x1D) // _SUN: Slot User Number
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
}
+ }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-17-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
3c99559269 |
tests: acpi: update expected blobs
Expected change:
- Name (_SUN, 0x0X) // _SUN: Slot User Number
Name (_ADR, 0xY) // _ADR: Address
...
+ Name (_SUN, 0xX) // _SUN: Slot User Number
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-14-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
0176649070 |
tests: acpi: update expected blobs
It's expected that hotpluggable slots will, get ASUN variable
and use that instead of _SUN with its _DSM method.
For example:
@@ -979,8 +979,9 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
Device (S18)
{
- Name (_SUN, 0x03) // _SUN: Slot User Number
+ Name (ASUN, 0x03)
Name (_ADR, 0x00030000) // _ADR: Address
+ Name (_SUN, 0x03) // _SUN: Slot User Number
Method (_EJ0, 1, NotSerialized) // _EJx: Eject Device
{
PCEJ (BSEL, _SUN)
@@ -991,7 +992,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
Local0 = Package (0x02)
{
BSEL,
- _SUN
+ ASUN
}
Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-11-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
13508ea26a |
tests: acpi: update expected blobs
An intermediate blobs update to keep changes (last 2 patches)
reviewable.
Includes refactored PDSM that uses Package argument for custom
parameters.
===== PDSM taking package as arguments
Return (Local0)
}
- Method (PDSM, 6, Serialized)
+ Method (PDSM, 5, Serialized)
{
- If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") /* Device Labeling Interface */))
+ If ((Arg2 == Zero))
{
- Local0 = AIDX (Arg4, Arg5)
- If ((Arg2 == Zero))
- {
- If ((Arg1 == 0x02))
+ Local0 = Buffer (One)
{
- If (!((Local0 == Zero) | (Local0 == 0xFFFFFFFF)))
- {
- Return (Buffer (One)
- {
- 0x81 // .
- })
- }
+ 0x00 // .
}
+ Local1 = Zero
+ If ((Arg0 != ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") /* Device Labeling Interface */))
+ {
+ Return (Local0)
+ }
- Return (Buffer (One)
- {
- 0x00 // .
- })
+ If ((Arg1 < 0x02))
+ {
+ Return (Local0)
}
- ElseIf ((Arg2 == 0x07))
+
+ Local2 = AIDX (DerefOf (Arg4 [Zero]), DerefOf (Arg4 [One]
+ ))
+ If (!((Local2 == Zero) | (Local2 == 0xFFFFFFFF)))
{
- Local1 = Package (0x02)
- {
- Zero,
- ""
- }
- Local1 [Zero] = Local0
- Return (Local1)
+ Local1 |= One
+ Local1 |= (One << 0x07)
}
+
+ Local0 [Zero] = Local1
+ Return (Local0)
+ }
+
+ If ((Arg2 == 0x07))
+ {
+ Local0 = Package (0x02)
+ {
+ Zero,
+ ""
+ }
+ Local2 = AIDX (DerefOf (Arg4 [Zero]), DerefOf (Arg4 [One]
+ ))
+ Local0 [Zero] = Local2
+ Return (Local0)
}
}
}
===== PCI slot using Package to pass arguments to _DSM
Name (ASUN, Zero)
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
- Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, ASUN))
+ Local0 = Package (0x02)
+ {
+ BSEL,
+ ASUN
+ }
+ Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
}
}
===== hotpluggable PCI slot using Package to pass arguments to _DSM
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
- Return (PDSM (Arg0, Arg1, Arg2, Arg3, BSEL, _SUN))
+ Local0 = Package (0x02)
+ {
+ BSEL,
+ _SUN
+ }
+ Return (PDSM (Arg0, Arg1, Arg2, Arg3, Local0))
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
4609296d06 |
tests: acpi: update expected blobs after HPET move
HPET AML moved after PCI host bridge description (no functional change)
diff example for PC machine:
@@ -54,47 +54,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
}
}
- Scope (_SB)
- {
- Device (HPET)
- {
- Name (_HID, EisaId ("PNP0103") /* HPET System Timer */) // _HID: Hardware ID
- Name (_UID, Zero) // _UID: Unique ID
- OperationRegion (HPTM, SystemMemory, 0xFED00000, 0x0400)
- Field (HPTM, DWordAcc, Lock, Preserve)
- {
- VEND, 32,
- PRD, 32
- }
-
- Method (_STA, 0, NotSerialized) // _STA: Status
- {
- Local0 = VEND /* \_SB_.HPET.VEND */
- Local1 = PRD /* \_SB_.HPET.PRD_ */
- Local0 >>= 0x10
- If (((Local0 == Zero) || (Local0 == 0xFFFF)))
- {
- Return (Zero)
- }
-
- If (((Local1 == Zero) || (Local1 > 0x05F5E100)))
- {
- Return (Zero)
- }
-
- Return (0x0F)
- }
-
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
- {
- Memory32Fixed (ReadOnly,
- 0xFED00000, // Address Base
- 0x00000400, // Address Length
- )
- })
- }
- }
-
Scope (_SB.PCI0)
{
Device (ISA)
@@ -529,6 +488,47 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
}
}
+ Scope (_SB)
+ {
+ Device (HPET)
+ {
+ Name (_HID, EisaId ("PNP0103") /* HPET System Timer */) // _HID: Hardware ID
+ Name (_UID, Zero) // _UID: Unique ID
+ OperationRegion (HPTM, SystemMemory, 0xFED00000, 0x0400)
+ Field (HPTM, DWordAcc, Lock, Preserve)
+ {
+ VEND, 32,
+ PRD, 32
+ }
+
+ Method (_STA, 0, NotSerialized) // _STA: Status
+ {
+ Local0 = VEND /* \_SB_.HPET.VEND */
+ Local1 = PRD /* \_SB_.HPET.PRD_ */
+ Local0 >>= 0x10
+ If (((Local0 == Zero) || (Local0 == 0xFFFF)))
+ {
+ Return (Zero)
+ }
+
+ If (((Local1 == Zero) || (Local1 > 0x05F5E100)))
+ {
+ Return (Zero)
+ }
+
+ Return (0x0F)
+ }
+
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ Memory32Fixed (ReadOnly,
+ 0xFED00000, // Address Base
+ 0x00000400, // Address Length
+ )
+ })
+ }
+ }
+
Scope (_SB)
{
Device (\_SB.PCI0.PRES)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220701133515.137890-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Miguel Luis
|
0a17270761 |
tests/acpi: virt: update ACPI GTDT binaries
Step 6 & 7 of the bios-tables-test.c documented procedure.
Differences between disassembled ASL files for GTDT:
@@ -13,14 +13,14 @@
[000h 0000 4] Signature : "GTDT" [Generic Timer Description Table]
[004h 0004 4] Table Length : 00000060
[008h 0008 1] Revision : 02
-[009h 0009 1] Checksum : 8C
+[009h 0009 1] Checksum : 9C
[00Ah 0010 6] Oem ID : "BOCHS "
[010h 0016 8] Oem Table ID : "BXPC "
[018h 0024 4] Oem Revision : 00000001
[01Ch 0028 4] Asl Compiler ID : "BXPC"
[020h 0032 4] Asl Compiler Revision : 00000001
-[024h 0036 8] Counter Block Address : 0000000000000000
+[024h 0036 8] Counter Block Address : FFFFFFFFFFFFFFFF
[02Ch 0044 4] Reserved : 00000000
[030h 0048 4] Secure EL1 Interrupt : 0000001D
@@ -46,16 +46,16 @@
Trigger Mode : 0
Polarity : 0
Always On : 0
-[050h 0080 8] Counter Read Block Address : 0000000000000000
+[050h 0080 8] Counter Read Block Address : FFFFFFFFFFFFFFFF
[058h 0088 4] Platform Timer Count : 00000000
[05Ch 0092 4] Platform Timer Offset : 00000000
Raw Table Data: Length 96 (0x60)
- 0000: 47 54 44 54 60 00 00 00 02 8C 42 4F 43 48 53 20 // GTDT`.....BOCHS
+ 0000: 47 54 44 54 60 00 00 00 02 9C 42 4F 43 48 53 20 // GTDT`.....BOCHS
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
- 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
+ 0020: 01 00 00 00 FF FF FF FF FF FF FF FF 00 00 00 00 // ................
0030: 1D 00 00 00 00 00 00 00 1E 00 00 00 04 00 00 00 // ................
0040: 1B 00 00 00 00 00 00 00 1A 00 00 00 00 00 00 00 // ................
- 0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 // ................
+ 0050: FF FF FF FF FF FF FF FF 00 00 00 00 00 00 00 00 // ................
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20220920162137.75239-4-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
|
||
|
Thomas Huth
|
582a098e6c |
qga: Replace 'blacklist' command line and config file options by 'block-rpcs'
Let's use a more appropriate wording for this command line and config file option. The old ones are still accepted for compatibility reasons, but marked as deprecated now so that it could be removed in a future version of QEMU. This change is based on earlier patches from Philippe Mathieu-Daudé, with the idea for the new option name suggested by BALATON Zoltan. And while we're at it, replace the "?" in the help text with "help" since that does not have the problem of conflicting with the wildcard character of the shells. Message-Id: <20220727092135.302915-2-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> |
||
|
Mark Cave-Ayland
|
5060004c30 |
tests/acpi: virt: update golden masters for VIOT
Differences between disassembled ASL files for VIOT:
+++ /tmp/asl-V69GM1.dsl 2022-05-18 10:22:27.239796759 +0100
@@ -36,11 +36,11 @@
[041h 0065 1] Reserved : 00
[042h 0066 2] Length : 0018
-[044h 0068 4] Endpoint start : 00003000
+[044h 0068 4] Endpoint start : 00001000
[048h 0072 2] PCI Segment start : 0000
[04Ah 0074 2] PCI Segment end : 0000
-[04Ch 0076 2] PCI BDF start : 3000
-[04Eh 0078 2] PCI BDF end : 30FF
+[04Ch 0076 2] PCI BDF start : 1000
+[04Eh 0078 2] PCI BDF end : 10FF
[050h 0080 2] Output node : 0030
[052h 0082 6] Reserved : 000000000000
@@ -48,11 +48,11 @@
[059h 0089 1] Reserved : 00
[05Ah 0090 2] Length : 0018
-[05Ch 0092 4] Endpoint start : 00001000
+[05Ch 0092 4] Endpoint start : 00003000
[060h 0096 2] PCI Segment start : 0000
[062h 0098 2] PCI Segment end : 0000
-[064h 0100 2] PCI BDF start : 1000
-[066h 0102 2] PCI BDF end : 10FF
+[064h 0100 2] PCI BDF start : 3000
+[066h 0102 2] PCI BDF end : 30FF
[068h 0104 2] Output node : 0030
[06Ah 0106 6] Reserved : 000000000000
@@ -62,6 +62,6 @@
0010: 42 58 50 43 20 20 20 20 01 00 00 00 42 58 50 43 // BXPC ....BXPC
0020: 01 00 00 00 03 00 30 00 00 00 00 00 00 00 00 00 // ......0.........
0030: 03 00 10 00 00 00 10 00 00 00 00 00 00 00 00 00 // ................
- 0040: 01 00 18 00 00 30 00 00 00 00 00 00 00 30 FF 30 // .....0.......0.0
- 0050: 30 00 00 00 00 00 00 00 01 00 18 00 00 10 00 00 // 0...............
- 0060: 00 00 00 00 00 10 FF 10 30 00 00 00 00 00 00 00 // ........0.......
+ 0040: 01 00 18 00 00 10 00 00 00 00 00 00 00 10 FF 10 // ................
+ 0050: 30 00 00 00 00 00 00 00 01 00 18 00 00 30 00 00 // 0............0..
+ 0060: 00 00 00 00 00 30 FF 30 30 00 00 00 00 00 00 00 // .....0.00.......
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220525173232.31429-7-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Jonathan Cameron
|
3546b0529a |
tests/acpi: Update q35/CEDT.cxl for new memory addresses.
The CEDT table includes addreses of host bridge registers. There are allocated in a different order due to the previous patch, so update to the table is needed. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Message-Id: <20220608145440.26106-7-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
f3115cdd9c |
tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
expected move of tmp-tis device description directly under
Device(ISA) node.
for tpm-tis 2.0:
@@ -145,6 +145,189 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Name (_ADR, 0x001F0000) // _ADR: Address
OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+ Device (TPM)
+ {
+ Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID
+ Name (_STR, "TPM 2.0 Device") // _STR: Description String
+ Name (_UID, One) // _UID: Unique ID
+ Name (_STA, 0x0F) // _STA: Status
...
+ }
@@ -3281,189 +3464,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
Method (PCNT, 0, NotSerialized)
{
}
-
- Device (TPM)
- {
- Name (_HID, "MSFT0101" /* TPM 2.0 Security Device */) // _HID: Hardware ID
- Name (_STR, "TPM 2.0 Device") // _STR: Description String
- Name (_UID, One) // _UID: Unique ID
- Name (_STA, 0x0F) // _STA: Status
...
- }
for tpm-tis 1.2:
@@ -145,6 +145,188 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Name (_ADR, 0x001F0000) // _ADR: Address
OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+ Device (TPM)
+ {
+ Name (_HID, EisaId ("PNP0C31")) // _HID: Hardware ID
+ Name (_UID, One) // _UID: Unique ID
+ Name (_STA, 0x0F) // _STA: Status
...
+ }
@@ -3281,188 +3463,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
Method (PCNT, 0, NotSerialized)
{
}
-
- Device (ISA.TPM)
- {
- Name (_HID, EisaId ("PNP0C31")) // _HID: Hardware ID
- Name (_UID, One) // _UID: Unique ID
- Name (_STA, 0x0F) // _STA: Status
...
- }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220608135340.3304695-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
d09ac1167e |
tests: acpi: update expected DSDT.pvpanic-isa blob
@@ -145,6 +145,37 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Name (_ADR, 0x001F0000) // _ADR: Address
OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+ Device (PEVT)
+ {
+ Name (_HID, "QEMU0001") // _HID: Hardware ID
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x0505, // Range Minimum
+ 0x0505, // Range Maximum
+ 0x01, // Alignment
+ 0x01, // Length
+ )
+ })
+ OperationRegion (PEOR, SystemIO, 0x0505, One)
+ Field (PEOR, ByteAcc, NoLock, Preserve)
+ {
+ PEPT, 8
+ }
+
+ Name (_STA, 0x0F) // _STA: Status
+ Method (RDPT, 0, NotSerialized)
+ {
+ Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */
+ Return (Local0)
+ }
+
+ Method (WRPT, 1, NotSerialized)
+ {
+ PEPT = Arg0
+ }
+ }
+
Device (KBD)
{
Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID
@@ -3246,40 +3277,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
}
}
- Scope (\_SB.PCI0.ISA)
- {
- Device (PEVT)
- {
- Name (_HID, "QEMU0001") // _HID: Hardware ID
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
- {
- IO (Decode16,
- 0x0505, // Range Minimum
- 0x0505, // Range Maximum
- 0x01, // Alignment
- 0x01, // Length
- )
- })
- OperationRegion (PEOR, SystemIO, 0x0505, One)
- Field (PEOR, ByteAcc, NoLock, Preserve)
- {
- PEPT, 8
- }
-
- Name (_STA, 0x0F) // _STA: Status
- Method (RDPT, 0, NotSerialized)
- {
- Local0 = PEPT /* \_SB_.PCI0.ISA_.PEVT.PEPT */
- Return (Local0)
- }
-
- Method (WRPT, 1, NotSerialized)
- {
- PEPT = Arg0
- }
- }
- }
-
Scope (\_SB)
{
Scope (PCI0)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-30-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
||
|
Igor Mammedov
|
7a3048d596 |
tests: acpi: white-lists expected DSDT.pvpanic-isa blob
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-27-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
ec66dbc753 |
tests: acpi: update expected blobs
@@ -145,6 +145,23 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
{
Name (_ADR, 0x001F0000) // _ADR: Address
OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C)
+ Device (SMC)
+ {
+ Name (_HID, EisaId ("APP0001")) // _HID: Hardware ID
+ Name (_STA, 0x0B) // _STA: Status
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x0300, // Range Minimum
+ 0x0300, // Range Maximum
+ 0x01, // Alignment
+ 0x20, // Length
+ )
+ IRQNoFlags ()
+ {6}
+ })
+ }
+
Device (KBD)
{
Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID
@@ -3246,26 +3263,6 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001)
}
}
- Scope (\_SB.PCI0.ISA)
- {
- Device (SMC)
- {
- Name (_HID, EisaId ("APP0001")) // _HID: Hardware ID
- Name (_STA, 0x0B) // _STA: Status
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
- {
- IO (Decode16,
- 0x0300, // Range Minimum
- 0x0300, // Range Maximum
- 0x01, // Alignment
- 0x20, // Length
- )
- IRQNoFlags ()
- {6}
- })
- }
- }
-
Scope (\_SB)
{
Scope (PCI0)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220608135340.3304695-26-imammedo@redhat.com>
|
||
|
Igor Mammedov
|
39728badab |
tests: acpi: add and white-list DSDT.applesmc expected blob
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20220608135340.3304695-23-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Igor Mammedov
|
8796f60fbf |
tests: acpi: update expected blobs
Expected AML change:
ISA devices under separate _SB.PCI0.ISA scope are moved
directly under Device(ISA) node.
Example from PC machine, and q35 have similar changes:
{
Name (_ADR, 0x00010000) // _ADR: Address
OperationRegion (P40C, PCI_Config, 0x60, 0x04)
- }
- }
-
- Scope (_SB.PCI0.ISA)
- {
- Device (KBD)
- {
- Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID
- Name (_STA, 0x0F) // _STA: Status
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ Device (KBD)
{
- IO (Decode16,
- 0x0060, // Range Minimum
- 0x0060, // Range Maximum
- 0x01, // Alignment
- 0x01, // Length
- )
- IO (Decode16,
- 0x0064, // Range Minimum
- 0x0064, // Range Maximum
- 0x01, // Alignment
- 0x01, // Length
- )
- IRQNoFlags ()
- {1}
- })
- }
-
- Device (MOU)
- {
- Name (_HID, EisaId ("PNP0F13") /* PS/2 Mouse */) // _HID: Hardware ID
- Name (_STA, 0x0F) // _STA: Status
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
- {
- IRQNoFlags ()
- {12}
- })
- }
+ Name (_HID, EisaId ("PNP0303") /* IBM Enhanced Keyboard (101/102-key, PS/2 Mouse) */) // _HID: Hardware ID
+ Name (_STA, 0x0F) // _STA: Status
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x0060, // Range Minimum
+ 0x0060, // Range Maximum
+ 0x01, // Alignment
+ 0x01, // Length
+ )
+ IO (Decode16,
+ 0x0064, // Range Minimum
+ 0x0064, // Range Maximum
+ 0x01, // Alignment
+ 0x01, // Length
+ )
+ IRQNoFlags ()
+ {1}
+ })
+ }
- Device (FDC0)
- {
- Name (_HID, EisaId ("PNP0700")) // _HID: Hardware ID
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
- {
- IO (Decode16,
- 0x03F2, // Range Minimum
- 0x03F2, // Range Maximum
- 0x00, // Alignment
- 0x04, // Length
- )
- IO (Decode16,
- 0x03F7, // Range Minimum
- 0x03F7, // Range Maximum
- 0x00, // Alignment
- 0x01, // Length
- )
- IRQNoFlags ()
- {6}
- DMA (Compatibility, NotBusMaster, Transfer8, )
- {2}
- })
- Device (FLPA)
+ Device (MOU)
{
- Name (_ADR, Zero) // _ADR: Address
- Name (_FDI, Package (0x10) // _FDI: Floppy Drive Information
+ Name (_HID, EisaId ("PNP0F13") /* PS/2 Mouse */) // _HID: Hardware ID
+ Name (_STA, 0x0F) // _STA: Status
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
- Zero,
- 0x05,
- 0x4F,
- 0x30,
- One,
- 0xAF,
- 0x02,
- 0x25,
- 0x02,
- 0x12,
- 0x1B,
- 0xFF,
- 0x6C,
- 0xF6,
- 0x0F,
- 0x08
+ IRQNoFlags ()
+ {12}
})
}
- Name (_FDE, Buffer (0x14) // _FDE: Floppy Disk Enumerate
+ Device (FDC0)
{
- /* 0000 */ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........
- /* 0008 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........
- /* 0010 */ 0x02, 0x00, 0x00, 0x00 // ....
- })
- }
+ Name (_HID, EisaId ("PNP0700")) // _HID: Hardware ID
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x03F2, // Range Minimum
+ 0x03F2, // Range Maximum
+ 0x00, // Alignment
+ 0x04, // Length
+ )
+ IO (Decode16,
+ 0x03F7, // Range Minimum
+ 0x03F7, // Range Maximum
+ 0x00, // Alignment
+ 0x01, // Length
+ )
+ IRQNoFlags ()
+ {6}
+ DMA (Compatibility, NotBusMaster, Transfer8, )
+ {2}
+ })
+ Device (FLPA)
+ {
+ Name (_ADR, Zero) // _ADR: Address
+ Name (_FDI, Package (0x10) // _FDI: Floppy Drive Information
+ {
+ Zero,
+ 0x05,
+ 0x4F,
+ 0x30,
+ One,
+ 0xAF,
+ 0x02,
+ 0x25,
+ 0x02,
+ 0x12,
+ 0x1B,
+ 0xFF,
+ 0x6C,
+ 0xF6,
+ 0x0F,
+ 0x08
+ })
+ }
- Device (LPT1)
- {
- Name (_HID, EisaId ("PNP0400") /* Standard LPT Parallel Port */) // _HID: Hardware ID
- Name (_UID, One) // _UID: Unique ID
- Name (_STA, 0x0F) // _STA: Status
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ Name (_FDE, Buffer (0x14) // _FDE: Floppy Disk Enumerate
+ {
+ /* 0000 */ 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........
+ /* 0008 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // ........
+ /* 0010 */ 0x02, 0x00, 0x00, 0x00 // ....
+ })
+ }
+
+ Device (LPT1)
{
- IO (Decode16,
- 0x0378, // Range Minimum
- 0x0378, // Range Maximum
- 0x08, // Alignment
- 0x08, // Length
- )
- IRQNoFlags ()
- {7}
- })
- }
+ Name (_HID, EisaId ("PNP0400") /* Standard LPT Parallel Port */) // _HID: Hardware ID
+ Name (_UID, One) // _UID: Unique ID
+ Name (_STA, 0x0F) // _STA: Status
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x0378, // Range Minimum
+ 0x0378, // Range Maximum
+ 0x08, // Alignment
+ 0x08, // Length
+ )
+ IRQNoFlags ()
+ {7}
+ })
+ }
- Device (COM1)
- {
- Name (_HID, EisaId ("PNP0501") /* 16550A-compatible COM Serial Port */) // _HID: Hardware ID
- Name (_UID, One) // _UID: Unique ID
- Name (_STA, 0x0F) // _STA: Status
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ Device (COM1)
{
- IO (Decode16,
- 0x03F8, // Range Minimum
- 0x03F8, // Range Maximum
- 0x00, // Alignment
- 0x08, // Length
- )
- IRQNoFlags ()
- {4}
- })
- }
+ Name (_HID, EisaId ("PNP0501") /* 16550A-compatible COM Serial Port */) // _HID: Hardware ID
+ Name (_UID, One) // _UID: Unique ID
+ Name (_STA, 0x0F) // _STA: Status
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x03F8, // Range Minimum
+ 0x03F8, // Range Maximum
+ 0x00, // Alignment
+ 0x08, // Length
+ )
+ IRQNoFlags ()
+ {4}
+ })
+ }
- Device (RTC)
- {
- Name (_HID, EisaId ("PNP0B00") /* AT Real-Time Clock */) // _HID: Hardware ID
- Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ Device (RTC)
{
- IO (Decode16,
- 0x0070, // Range Minimum
- 0x0070, // Range Maximum
- 0x01, // Alignment
- 0x08, // Length
- )
- IRQNoFlags ()
- {8}
- })
+ Name (_HID, EisaId ("PNP0B00") /* AT Real-Time Clock */) // _HID: Hardware ID
+ Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
+ {
+ IO (Decode16,
+ 0x0070, // Range Minimum
+ 0x0070, // Range Maximum
+ 0x01, // Alignment
+ 0x08, // Length
+ )
+ IRQNoFlags ()
+ {8}
+ })
+ }
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220609115113.3478093-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|