Commit Graph

42 Commits

Author SHA1 Message Date
Halil Pasic d2256070d2 virtio-ccw: add virtio-crypto-ccw device
Wire up virtio-crypto for the CCW based VIRTIO.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-02-24 10:15:18 +01:00
Halil Pasic 47e13dfd86 virtio-ccw: handle virtio 1 only devices
As a preparation for wiring-up virtio-crypto, the first non-transitional
virtio device on the ccw transport, let us introduce a mechanism for
disabling revision 0.  This is more or less equivalent with disabling
legacy as revision 0 is legacy only, and legacy drivers use the revision
0 exclusively.

Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-02-24 10:15:18 +01:00
Paolo Bonzini b13d396227 virtio: move ioeventfd_started flag to VirtioBusState
This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback.  The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore.  It was the only backend to do
so, and if desired this behavior should be implemented in

virtio-bus.c.

Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30 19:51:32 +02:00
Paolo Bonzini 4ddcc2d5cb virtio: move ioeventfd_disabled flag to VirtioBusState
This simplifies the code and removes the ioeventfd_set_disabled
callback.

Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30 19:51:32 +02:00
Pierre Morel 7aa2adc283 virtio-ccw: set revision 2 as maximal revision number
We have everything needed for virtio-ccw revision 2 wired up now.
Bump the maximum supported revision reported on a device basis to
the guest so they can make use of it.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-19 11:05:51 +02:00
Pierre Morel e32652f759 virtio-ccw: respond to READ_STATUS command
This patch adds the response to the READ_STATUS CCW command.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-19 11:05:51 +02:00
Ladi Prosek d4b84d564e Remove unused function declarations
Unused function declarations were found using a simple gcc plugin and
manually verified by grepping the sources.

Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-15 15:32:22 +03:00
Stefan Hajnoczi fc0b9b0e1c vhost-vsock: add virtio sockets device
Implement the new virtio sockets device for host<->guest communication
using the Sockets API.  Most of the work is done in a vhost kernel
driver so that virtio-vsock can hook into the AF_VSOCK address family.
The QEMU vhost-vsock device handles configuration and live migration
while the rx/tx happens in the vhost_vsock.ko Linux kernel driver.

The vsock device must be given a CID (host-wide unique address):

  # qemu -device vhost-vsock-pci,id=vhost-vsock-pci0,guest-cid=3 ...

For more information see:
http://qemu-project.org/Features/VirtioVsock

[Endianness fixes and virtio-ccw support by Claudio Imbrenda
<imbrenda@linux.vnet.ibm.com>]

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
[mst: rebase to master]
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-09-10 00:28:08 +03:00
Markus Armbruster a9c94277f0 Use #include "..." for our own headers, <...> for others
Tracked down with an ugly, brittle and probably buggy Perl script.

Also move includes converted to <...> up so they get included before
ours where that's obviously okay.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12 16:19:16 +02:00
Jing Liu b804e8a62a s390x/css: Unplug handler of virtual css bridge
The previous patch moved virtual css bridge and bus out from
virtio-ccw, but kept the direct reference of virtio-ccw specific
unplug function inside css-bridge.c.

To make the virtual css bus and bridge useful for non-virtio devices,
this introduces a common unplug function pointer "unplug" to call
specific virtio-ccw unplug parts. Thus, the tight coupling to
virtio-ccw can be removed.

This unplug pointer is a member of CCWDeviceClass, which is introduced
as an abstract device layer called "ccw-device". This layer is between
DeviceState and specific devices which are plugged in virtual css bus,
like virtio-ccw device. The specific unplug handlers should be assigned
to "unplug" during initialization.

Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-11 09:48:05 +02:00
Jing Liu dd70bd0d4c s390x/css: Factor out virtual css bridge and bus
Currently, common base layers virtual css bridge and bus are
defined in hw/s390x/virtio-ccw.c(h). In order to support
multiple types of devices in the virtual channel subsystem,
especially non virtio-ccw, refactoring work needs to be done.

This work is just a pure code move without any functional change
except dropping an empty function virtual_css_bridge_init() and
virtio_ccw_busdev_unplug() changing. virtio_ccw_busdev_unplug()
is specific to virtio-ccw but gets referenced from the common
virtual css bridge code. To keep the functional changes to a
minimum we export this function from virtio-ccw.c and continue
to reference it inside virtual_css_bridge_class_init()
(now living in hw/s390x/css-bridge.c). A follow-up patch will
clean this up.

Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-11 09:48:05 +02:00
Sascha Silbe 3f9e485964 s390x/css: use define for "virtual-css-bridge" literal
Introduce a TYPE_* define (like we already use for a couple of other
QOM types) for the name of the virtual CSS bridge QOM type instead of
sprinkling the same string literal over several source files.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-11 09:48:05 +02:00
Sascha Silbe cf2499350a s390x/css: factor out some generic code from virtio_ccw_device_realize()
A lot of what virtio_ccw_device_realize() does isn't specific to
virtio; it would apply to emulated CCW as well. Factor it out to make
it easier to implement emulated CCW devices later on.

Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-11 09:48:05 +02:00
Cornelia Huck 06e686eaab s390x/css: introduce property type for device ids
Let's introduce a CssDevId to handle device ids of the xx.x.xxxx
type used for channel devices. This has some benefits:

- We can use them in virtio-ccw and split the validity checks for
  a channel device id in general from the constraint checking
  within the virtio-ccw scope.
- We can reuse the device id type for future non-virtio channel
  devices.

While we're at it, improve the validity checks and disallow e.g.
trailing characters.

Suggested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14 13:34:50 +02:00
Paolo Bonzini bd3f16ac30 s390x: reorganize CSS bits between cpu.h and other headers
Move cpu_inject_* to the only C file where they are used.

Move ioinst.h declarations that need S390CPU to cpu.h, to make
ioinst.h independent of cpu.h.

Move channel declarations that only need SubchDev from cpu.h
to css.h, to make more channel users independent of cpu.h.

Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19 16:42:28 +02:00
Yi Min Zhao a28d8391e3 s390x/css: introduce indicator refcounting interfaces
Currently, virtio-ccw uses its own interfaces to keep indicators mapped
just once even if the same address has been registered multiple times.
These interfaces fit the PCI use case as well. Therefore, move them to
css and make them generic interfaces.

Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-01 12:15:28 +01:00
Wei Liu 00588a0aa2 9pfs: introduce V9fsVirtioState
V9fsState now only contains generic fields. Introduce V9fsVirtioState
for virtio transport.  Change virtio-pci and virtio-ccw to use
V9fsVirtioState.

Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2016-01-12 11:04:14 +05:30
Cornelia Huck 542571d523 virtio-ccw: enable virtio-1
Let's enable revision 1 for virtio-ccw devices. We can always offer
VERSION_1 as drivers in legacy mode won't be able to see it anyway.

We have to introduce a way to set a lower maximum revision for a device
to accommodate the following cases:
- compat machines (to enforce legacy only)
- virtio-blk with scsi support (version 1 + scsi is fenced by common
  code, with a user-configured max revision of 0 we can allow scsi
  via not offering VERSION_1)

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24 13:42:17 +03:00
Thomas Huth c42767f2bb s390x/virtio-ccw: add virtio set-revision call
Handle the virtio-ccw revision according to what the guest sets.
When revision 1 is selected, we have a virtio-1 standard device
with byteswapping for the virtio rings.

When a channel gets disabled, we have to revert to the legacy behavior
in case the next user of the device does not negotiate the revision 1
anymore (e.g. the boot firmware uses revision 1, but the operating
system only uses the legacy mode).

Note that revisions > 0 are still disabled.

[CH: assure memory accesses are always BE]
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-02 15:35:15 +02:00
Pierre Morel de6a92185e virtio-ccw: add support for 9pfs
This patch adds 9pfs support for virtio-ccw
by registering the virtio_ccw_9p_info type
and adding associated callbacks.

Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-03 18:06:45 +02:00
Cornelia Huck 6b8f102054 virtio: move host_features
Move host_features from the individual transport proxies into
the virtio device. Transports may continue to add feature bits
during device plugging.

This should it make easier to offer different sets of host features
for virtio-1/transitional support.

Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31 16:27:18 +02:00
Markus Armbruster 5e5ced386a virtio-ccw: Convert to realize()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1425045219-19958-1-git-send-email-armbru@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10 09:26:23 +01:00
Stefan Hajnoczi caffdac363 virtio-blk: use aliases instead of duplicate qdev properties
virtio-blk-pci, virtio-blk-s390, and virtio-blk-ccw all duplicate the
qdev properties of their VirtIOBlock child.  This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.

Use the QOM alias property to forward property accesses to the
VirtIOBlock child.  This way no duplication is necessary.

Remember to stop calling virtio_blk_set_conf() so that we don't clobber
the values already set on the VirtIOBlock instance.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-07-01 09:15:02 +02:00
Cornelia Huck d426d9fba8 s390x/virtio-ccw: wire up irq routing and irqfds
Make use of the new s390 adapter irq routing support to enable real
in-kernel irqfds for virtio-ccw with adapter interrupts.

Note that s390 doesn't provide the common KVM_CAP_IRQCHIP capability, but
rather needs KVM_CAP_S390_IRQCHIP to be enabled. This is to ensure backward
compatibility.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:58 +02:00
Cornelia Huck 7bca3892cb s390x/virtio-ccw: reference-counted indicators
Make code using the same indicators point to a single allocated structure
that is freed when the last user goes away.

This will be used by the irqfd code to unmap addresses after the last user
is gone.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:58 +02:00
Cornelia Huck 03cf077ac9 s390x: add I/O adapter registration
Register an I/O adapter interrupt source for when virtio-ccw devices start
using adapter interrupts.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-05-20 13:05:58 +02:00
Cornelia Huck 7e7494627f s390x/virtio-ccw: Adapter interrupt support.
Handle the new CCW_CMD_SET_IND_ADAPTER command enabling adapter interrupts
on guest request. When active, host->guest notifications will be handled
via global_indicator -> queue indicators instead of queue indicators +
subchannel I/O interrupt. Indicators for virtqueues may be present at an
offset.

Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-03-05 09:42:05 +01:00
Paolo Bonzini f24a684073 virtio-ccw: remove vdev field
The vdev field is complicated to synchronize.  Just access the
BusState's list of children.

Cc: qemu-stable@nongnu.org
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09 21:46:48 +01:00
Cornelia Huck 320ce8503b virtio-ccw: Wire up guest and host notifies.
Guest and host notifiers are needed by vhost. We use ioeventfds for
the guest notifiers, but need to fall back on qemu injecting interrupts
for the host notifiers.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-06-25 17:11:12 +02:00
Cornelia Huck b4436a0b4d virtio-ccw: Wire up ioeventfd.
On hosts that support ioeventfd, make use of it for host-to-guest
notifications via diagnose 500.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-06-25 17:11:11 +02:00
Ed Maste b702d2aebe virtio: Fix compilation without CONFIG_VHOST_SCSI
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-26 13:23:31 +02:00
KONRAD Frederic d51fcfac8a virtio-bus: make virtio_x_bus_new static.
virtio_x_bus_new are only used in file scope.
So this make them static.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24 11:50:20 -05:00
KONRAD Frederic 2db26d4ca2 virtio-rng-ccw: switch to the new API.
Here the virtio-rng-ccw is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24 11:50:19 -05:00
Paolo Bonzini ccf6916c84 vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-19 16:18:47 +02:00
KONRAD Frederic 89334c8b6b virtio-net-ccw: switch to the new API.
Here the virtio-net-ccw is modified for the new API. The device
virtio-net-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-17 10:28:59 -05:00
KONRAD Frederic 6acf69cd4f virtio-serial-ccw: switch to the new API.
Here the virtio-serial-ccw is modified for the new API. The device
virtio-serial-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-serial during the init. The properties are not modified.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-15 10:22:05 -05:00
Paolo Bonzini 0d09e41a51 hw: move headers to include/
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08 18:13:10 +02:00
KONRAD Frederic 30bff6a0f1 virtio-balloon-ccw: switch to the new API.
Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-balloon during the init. The properties are not modified.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-28 12:57:41 -05:00
KONRAD Frederic c908ea1052 virtio-scsi-ccw: switch to new API
Here the virtio-scsi-ccw is modified for the new API. The device
virtio-scsi-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-scsi during the init. The properties are not modified.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1363875320-7985-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-26 09:26:36 -05:00
KONRAD Frederic 3400c45504 virtio-blk-ccw switch to new API.
Here the virtio-ccw-s390 is modified for the new API. The device
virtio-ccw-s390 extends virtio-ccw-device as before. It creates and
connects a virtio-ccw during the init. The properties are not modified.

Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363624648-16906-9-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-18 13:08:40 -05:00
Cornelia Huck 2362ecc5c6 virtio-ccw: Wire up virtio-rng.
Make virtio-rng devices available for s390-ccw-virtio machines.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2013-03-12 13:39:22 +01:00
Cornelia Huck a5cf2bb4e3 s390: Add new channel I/O based virtio transport.
Add a new virtio transport that uses channel commands to perform
virtio operations.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29 21:50:04 +01:00