Add a QAuthZList object type that implements the QAuthZ interface. This
built-in implementation maintains a trivial access control list with a
sequence of match rules and a final default policy. This replicates the
functionality currently provided by the qemu_acl module.
To create an instance of this object via the QMP monitor, the syntax
used would be:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-list",
"id": "authz0",
"props": {
"rules": [
{ "match": "fred", "policy": "allow", "format": "exact" },
{ "match": "bob", "policy": "allow", "format": "exact" },
{ "match": "danb", "policy": "deny", "format": "glob" },
{ "match": "dan*", "policy": "allow", "format": "exact" },
],
"policy": "deny"
}
}
}
This sets up an authorization rule that allows 'fred', 'bob' and anyone
whose name starts with 'dan', except for 'danb'. Everyone unmatched is
denied.
It is not currently possible to create this via -object, since there is
no syntax supported to specify non-scalar properties for objects. This
is likely to be addressed by later support for using JSON with -object,
or an equivalent approach.
In any case the future "authz-listfile" object can be used from the
CLI and is likely a better choice, as it allows the ACL to be refreshed
automatically on change.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In many cases a single VM will just need to whitelist a single identity
as the allowed user of network services. This is especially the case for
TLS live migration (optionally with NBD storage) where we just need to
whitelist the x509 certificate distinguished name of the source QEMU
host.
Via QMP this can be configured with:
{
"execute": "object-add",
"arguments": {
"qom-type": "authz-simple",
"id": "authz0",
"props": {
"identity": "fred"
}
}
}
Or via the command line
-object authz-simple,id=authz0,identity=fred
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The inotify userspace API for reading events is quite horrible, so it is
useful to wrap it in a more friendly API to avoid duplicating code
across many users in QEMU. Wrapping it also allows introduction of a
platform portability layer, so that we can add impls for non-Linux based
equivalents in future.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Some operations take a long time and enabling "-l 2 -r all" can take
more than a day which is stretching the definition of a "slow" test.
Lets default to the quick test and leave a note for those who wish to
run by hand.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
On Linux (and maybe some BSDs), we require libutil for the openpty()
function. However, this library is not available on some other systems, so
we currently use a fragile if-statement in the configure script to check
whether we need the library or not. Unfortunately, we also hard-coded a
"-lutil" in the tests/Makefile.include file, so this breaks the build on
Solaris, for example (see buglink below). To fix the issue, add the "-lutil"
to "libs_tools" in the configure script instead, then this gets properly
propagated to the tests, too.
And while we're at it, also replace the fragile if-statement in the confi-
gure script with a proper link-check for the availability of this function.
Buglink: https://bugs.launchpad.net/qemu/+bug/1777252
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the block layer, synchronous APIs are often implemented by creating a
coroutine that calls the asynchronous coroutine-based implementation and
then waiting for completion with BDRV_POLL_WHILE().
For this to work with iothreads (more specifically, when the synchronous
API is called in a thread that is not the home thread of the block
device, so that the coroutine will run in a different thread), we must
make sure to call aio_wait_kick() at the end of the operation. Many
places are missing this, so that BDRV_POLL_WHILE() keeps hanging even if
the condition has long become false.
Note that bdrv_dec_in_flight() involves an aio_wait_kick() call. This
corresponds to the BDRV_POLL_WHILE() in the drain functions, but it is
generally not enough for most other operations because they haven't set
the return value in the coroutine entry stub yet. To avoid race
conditions there, we need to kick after setting the return value.
The race window is small enough that the problem doesn't usually surface
in the common path. However, it does surface and causes easily
reproducible hangs if the operation can return early before even calling
bdrv_inc/dec_in_flight, which many of them do (trivial error or no-op
success paths).
The bug in bdrv_truncate(), bdrv_check() and bdrv_invalidate_cache() is
slightly different: These functions even neglected to schedule the
coroutine in the home thread of the node. This avoids the hang, but is
obviously wrong, too. Fix those to schedule the coroutine in the right
AioContext in addition to adding aio_wait_kick() calls.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The qapi_event_send_FOO() functions emit events like this:
QMPEventFuncEmit emit;
emit = qmp_event_get_func_emit();
if (!emit) {
return;
}
qmp = qmp_event_build_dict("FOO");
[put event arguments into @qmp...]
emit(QAPI_EVENT_FOO, qmp);
The value of qmp_event_get_func_emit() depends only on the program:
* In qemu-system-FOO, it's always monitor_qapi_event_queue.
* In tests/test-qmp-event, it's always event_test_emit.
* In all other programs, it's always null.
This is exactly the kind of dependence the linker is supposed to
resolve; we don't actually need an indirection.
Note that things would fall apart if we linked more than one QAPI
schema into a single program: each set of qapi_event_send_FOO() uses
its own event enumeration, yet they share a single emit function.
Which takes the event enumeration as an argument. Which one if
there's more than one?
More seriously: how does this work even now? qemu-system-FOO wants
QAPIEvent, and passes a function taking that to
qmp_event_set_func_emit(). test-qmp-event wants test_QAPIEvent, and
passes a function taking that to qmp_event_set_func_emit().
It works by type trickery, of course:
typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict);
void qmp_event_set_func_emit(QMPEventFuncEmit emit);
QMPEventFuncEmit qmp_event_get_func_emit(void);
We use unsigned instead of the enumeration type. Relies on both
enumerations boiling down to unsigned, which happens to be true for
the compilers we use.
Clean this up as follows:
* Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit()
instead of the value of qmp_event_set_func_emit().
* Generate a prototype for PREFIX_qapi_event_emit() into
qapi-events.h.
* PREFIX_ is empty for qapi/qapi-schema.json, and test_ for
tests/qapi-schema/qapi-schema-test.json. It's qga_ for
qga/qapi-schema.json, and doc-good- for
tests/qapi-schema/doc-good.json, but those don't define any events.
* Rename monitor_qapi_event_queue() to qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
qemu-system-FOO.
* Rename event_test_emit() to test_qapi_event_emit() instead of
passing it to qmp_event_set_func_emit(). This takes care of
tests/test-qmp-event.
* Add a qapi_event_emit() that does nothing to stubs/monitor.c. This
takes care of all other programs that link code emitting QMP events.
* Drop qmp_event_set_func_emit(), qmp_event_get_func_emit().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181218182234.28876-3-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Commit message typos fixed]
This adds a rule to run all of our softfloat tests. It is included as
a pre-requisite to check-tcg and check-unit as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Wire up test/fp-test into the main testing Makefile. Currently we skip
some of the extF80 and f128 related tests. Once we re-factor and fix
these tests the plumbing should get simpler.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This test was merged into drive_del-test in 2014.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Fixes: e2f3f22188 ("Merge of qdev-monitor-test, blockdev-test")
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to build and test QEMU binaries where certain devices or machines
are disabled, we have to use the right CONFIG_* switches to run certain tests
only if the corresponding device or machine really has been compiled into
the binary.
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
To be able to build and test QEMU binaries where certain devices are
disabled, we have to use the right CONFIG_* switches to run certain
tests only if the corresponding device really has been compiled into
the binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
The ipmi-bt-test fails intermittently, especially on the NetBSD VM.
The frequency of this failure has recently gone up sharply to the
point that I'm having to retry the NetBSD build multiple times
to get a pass when merging pull requests.
Disable the test until we can figure out why it's failing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190118185402.3065-1-peter.maydell@linaro.org
Fixes:
* Actually test different Python versions on Travis CI
* Fix qemu.py error message when qemu dies from signal
Cleanups:
* Track Python version on config-host.mak
* Remove fixed crashes from scripts/device-crash-test
* Acceptance tests: Linux initrd checking test
* Fix utf-8 mangling at scripts/replay-dump.py
* Remove unused python imports from multiple scripts
-----BEGIN PGP SIGNATURE-----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=T5Wa
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/python-next-pull-request' into staging
Python queue, 2019-01-17
Fixes:
* Actually test different Python versions on Travis CI
* Fix qemu.py error message when qemu dies from signal
Cleanups:
* Track Python version on config-host.mak
* Remove fixed crashes from scripts/device-crash-test
* Acceptance tests: Linux initrd checking test
* Fix utf-8 mangling at scripts/replay-dump.py
* Remove unused python imports from multiple scripts
# gpg: Signature made Thu 17 Jan 2019 20:16:41 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/python-next-pull-request:
scripts/replay-dump.py: fix utf-8 mangling
qemu.py: Fix error message when qemu dies from signal
Acceptance tests: add Linux initrd checking test
check-help: visual and content improvements
Travis CI: make specified Python versions usable on jobs
check-venv: use recorded Python version
configure: keep track of Python version
scripts: Remove unused python imports
scripts/device-crash-test: Remove known crashes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcQTW/AAoJECgfDbjSjVRpY34H/0wniUqht3CVVihAfC9qnL7N
jgAJ41OGgrrCmXLrwa5P5iWxIKRjp2Odo7DQ2dl+9sqYshe6WoBBXmqEa8bDeldE
69EJ3xSnZjkpScqXKoSaDO3dtibUGpdvlTKpjuh7q2FFBOvNvf3hQubhyt/vINsO
qoDMqycjXJkHSaZLfdNb3P/LAkAuHI4veNk8KEbog3XTijSUbZlb2GYc8vT/agka
0SldiEVi9CTIh7co0L2BkcLVeTMVrF3OZuWDek3tVHXPxPaNbQM3GMvHZaxqZusU
SZinnNhcnI++kgLZVHuurxo7e1S9d8Oy0QuHGX8CZ1sfeqy3vzxer0Hbb7BdLIY=
=GhIM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio: fixes, features
tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 18 Jan 2019 02:11:11 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (49 commits)
migration: Use strnlen() for fixed-size string
migration: Fix stringop-truncation warning
hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arrays
block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays
qemu/compiler: Define QEMU_NONSTRING
acpi: update expected files
hw: acpi: Fix memory hotplug AML generation error
tpm: clear RAM when "memory overwrite" requested
acpi: add ACPI memory clear interface
acpi: build TPM Physical Presence interface
acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
tpm: allocate/map buffer for TPM Physical Presence interface
tpm: add a "ppi" boolean property
hw/misc/edu: add msi_uninit() for pci_edu_uninit()
virtio: Make disable-legacy/disable-modern compat properties optional
globals: Allow global properties to be optional
virtio: virtio 9p really requires CONFIG_VIRTFS to work
virtio: split virtio crypto bits from virtio-pci.h
virtio: split virtio gpu bits from virtio-pci.h
virtio: split virtio serial bits from virtio-pci
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtio console and qga tests also depend on CONFIG_VIRTIO_SERIAL.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Notice that we can't still run tests with it disabled. Both cdrom-test and
drive_del-test use virtio-scsi without checking if it is enabled.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "check" target is not a target that will run all other tests
listed, so in order to be accurate it's necessary to list those that
will run. The same is true for "check-clean".
Then, to give a better visual impression of the differences in the
various targets, let's add empty lines.
Finally, a small (and hopeful) grammar fix from a non-native speaker.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-5-crosa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current approach works fine, but it runs Python on every make
command (even if it's not related to the venv usage).
This is just an optimization, and not a change of behavior.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20181109150710.31085-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
-----BEGIN PGP SIGNATURE-----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=RksQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Work around test-qht-par + gprof issues
Travis CI jobs are failing because of test-qht-par when gprof is
enabled. Temporarily disable test-qht-par if gprof is enabled,
until we fix the bug.
# gpg: Signature made Fri 11 Jan 2019 18:23:29 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
tests: Disable qht-bench parallel test when using gprof
configure: Let the TARGET_GPROF var use the regular 'y' for Yes
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test is failing on the Travis CI [*] since some time now,
disable it until it get fixed.
[*] https://travis-ci.org/qemu/qemu/builds/474821674
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190103150951.17592-3-philmd@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
gtester is deprecated by upstream glib (see for example the announcement
at https://blog.gtk.org/2018/07/11/news-from-glib-2-58/) and it does
not support tests that call g_test_skip in some glib stable releases.
glib suggests instead using Automake's TAP support, which gtest itself
supports since version 2.38 (QEMU's minimum requirement is 2.40).
We do not support Automake, but we can use Automake's code to beautify
the TAP output. I chose to use the Perl copy rather than the shell/awk
one, with some changes so that it can accept TAP through stdin, in order
to reuse Perl's TAP parsing package. This also avoids duplicating the
parser between tap-driver.pl and tap-merge.pl.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543513531-1151-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are some "#ifdef CONFIG_VIRTIO_VGA" in the code here which
do not work as expected: CONFIG_VIRTIO_VGA is a Makefile switch,
but not a CPP macro, so the "guarded" code currently simply never
gets enabled.
So enable this code now unconditionally, with some runtime switches
for the architectures that have the VIRTIO_VGA device enabled by
default. Looking at the other if-statement in the main function here,
it also seems like this test was originally supposed to be running
on "mips" and "alpha", too, so enable it now for these architectures
in the Makefile, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1543492248-28356-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The test suite for the nRF51 GPIO peripheral for now
only tests initial state. Additionally a set of
tests testing an implementation detail of the model
are included.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-8-stefanha@redhat.com
[PMM: fixed stray space at start of file]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The generated code is for now *unconditional*. Later patches generate
the conditionals.
Note that union discriminators may not have 'if' conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-14-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-15-marcandre.lureau@redhat.com>
[Patches squashed, commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Wherever a struct/union/alternate/command/event member with NAME: TYPE
form is accepted, desugar it to a NAME: { 'type': TYPE } form.
This will allow to add new member details, such as 'if' in the
following patch to introduce conditionals, or 'default' for default
values etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-13-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPISchemaMember gains .ifcond for enum members: inherited classes,
such as QAPISchemaObjectTypeMember, will thus have an ifcond member
after this (those different types will also use the .ifcond to store
the condition and generate conditional code in the following patches).
The generated code remains unconditional for now. Later patches
generate the conditionals.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181213123724.4866-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Desugar the enum NAME form to { 'name': NAME }. This will allow to add
new enum members, such as 'if' in the following patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-7-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-8-marcandre.lureau@redhat.com>
Message-Id: <20181213123724.4866-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Harmless accidental move backed out, long line wrapped, patches
squashed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Because the CMB BAR has a min_access_size of 2, if you read the last
byte it will try to memcpy *2* bytes from n->cmbuf, causing an off-by-one
error. This is CVE-2018-16847.
Another way to fix this might be to register the CMB as a RAM memory
region, which would also be more efficient. However, that might be a
change for big-endian machines; I didn't think this through and I don't
know how real hardware works. Add a basic testcase for the CMB in case
somebody does this change later on.
Cc: Keith Busch <keith.busch@intel.com>
Cc: qemu-block@nongnu.org
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Tested-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The $(SHELLSTATUS) variable requires GNU make >= 4.2, but Travis
seems to provide an older version. Change the existing rules to
use command output instead of exit code, to make it compatible
with older GNU make versions.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The acceptance (aka functional, aka Avocado-based) tests are
Python files located in "tests/acceptance" that need to be run
with the Avocado libs and test runner.
Let's provide a convenient way for QEMU developers to run them,
by making use of the tests-venv with the required setup.
Also, while the Avocado test runner will take care of creating a
location to save test results to, it was understood that it's better
if the results are kept within the build tree.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-3-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
A number of QEMU tests are written in Python, and may benefit
from an untainted Python venv.
By using make rules, tests that depend on specific Python libs
can set that rule as a requirement, along with rules that require
the presence or installation of specific libraries.
The tests/requirements.txt is supposed to contain the Python
requirements that should be added to the venv created by check-venv.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Message-Id: <20181018153134.8493-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
nettle 2.7.1 was released in 2013 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 2.7.1
Debian (Stretch): 3.3
Debian (Jessie): 2.7.1
OpenBSD (ports): 3.4
FreeBSD (ports): 3.4
OpenSUSE Leap 15: 3.4
Ubuntu (Xenial): 3.2
macOS (Homebrew): 3.4
Based on this, it is reasonable to require nettle >= 2.7.1 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libgcrypt 1.5.0 was released in 2011 and all the distros that are build
target platforms for QEMU [1] include it:
RHEL-7: 1.5.3
Debian (Stretch): 1.7.6
Debian (Jessie): 1.6.3
OpenBSD (ports): 1.8.2
FreeBSD (ports): 1.8.3
OpenSUSE Leap 15: 1.8.2
Ubuntu (Xenial): 1.6.5
macOS (Homebrew): 1.8.3
Based on this, it is reasonable to require libgcrypt >= 1.5.0 in QEMU
which allows for some conditional version checks in the code to be
removed.
[1] https://qemu.weilnetz.de/doc/qemu-doc.html#Supported-build-platforms
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 31d2dda ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr. However, the variables were never removed.
Do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: Thomas Huth <thuth@redhat.com>
GNU make is perfectly happy to use 'check-FOO-y += bar' to
initialize check-FOO-y. (GNU Automake strictly insists that
you cannot use += until after an initial = per variable, but
thankfully we aren't using automake).
As we have had more than one instance where copy-and-paste of
'check-FOO-y = bar' from a first test under category FOO into
an additional test, which ends up disabling the first (see
commits 992159c7 and 4429532b), it's better to just always use
the form that survives copy-and-paste, even for categories that
don't currently add more than one test.
Done with s/^\(check-[a-z]*-y \)=/\1+=/g
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We can re-use the s390-ccw bios code to implement a small firmware
for a s390x guest which prints out the "A" and "B" characters and
modifies the memory, as required for the migration test.
[quintela: Converted the compile script to Makefile rules]
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1539078677-25396-1-git-send-email-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up Makefile since the aarch patch sneaked in first
This patch adds migration test support for aarch64. The test code, which
implements the same functionality as x86, is booted as a kernel in qemu.
Here are the design choices we make for aarch64:
* We choose this -kernel approach because aarch64 QEMU doesn't provide a
built-in fw like x86 does. So instead of relying on a boot loader, we
use -kernel approach for aarch64.
* The serial output is sent to PL011 directly.
* The physical memory base for mach-virt machine is 0x40000000. We change
the start_address and end_address for aarch64.
In addition to providing the binary, this patch also includes the source
code and the build script in tests/migration/aarch64. So users can change
the source and/or re-compile the binary as they wish.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-Id: <1538669326-28135-1-git-send-email-wei@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Commit 0bcc8e5bd8 accidentally dropped check-qdict from the list of
unit tests (again, see commit 4429532b48). Put it back, and fix up
the test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180926122309.30631-1-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
By leveraging berkeley's softfloat and testfloat.
With this we get decent coverage of softfloat.c:
$ ./fp-test -r even: 67.22% coverage
$ ./fp-test -r all: 73.11% coverage
Note that we do not yet test parts of softfloat.c that aren't
in the original softfloat library, namely:
- denormal inputs
- *_to_int16/uint16 conversions
- scalbn for fixed point
- muladd variants
- min/max
- exp2
- log2
- float*_compare (except float16_compare)
Signed-off-by: Emilio G. Cota <cota@braap.org>
[rth: Add the new modules to git_submodules.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
