on creation a PCIDevice has power turned on at the end of pci_qdev_realize()
however later on if PCIe slot isn't populated with any children
it's power is turned off. It's fine if native hotplug is used
as plug callback will power slot on among other things.
However when ACPI hotplug is enabled it replaces native PCIe plug
callbacks with ACPI specific ones (acpi_pcihp_device_*plug_cb) and
as result slot stays powered off. It works fine as ACPI hotplug
on guest side takes care of enumerating/initializing hotplugged
device. But when later guest is migrated, call chain introduced by]
commit d5daff7d31 (pcie: implement slot power control for pcie root ports)
pcie_cap_slot_post_load()
-> pcie_cap_update_power()
-> pcie_set_power_device()
-> pci_set_power()
-> pci_update_mappings()
will disable earlier initialized BARs for the hotplugged device
in powered off slot due to commit 23786d1344 (pci: implement power state)
which disables BARs if power is off.
Fix it by setting PCI_EXP_SLTCTL_PCC to PCI_EXP_SLTCTL_PWR_ON
on slot (root port/downstream port) at the time a device
hotplugged into it. As result PCI_EXP_SLTCTL_PWR_ON is migrated
to target and above call chain keeps device plugged into it
powered on.
Fixes: d5daff7d31 ("pcie: implement slot power control for pcie root ports")
Fixes: 23786d1344 ("pci: implement power state")
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2053584
Suggested-by: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220301151200.3507298-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change is cosmetic. IS_UEFI_CPER_RECORD macro definition that was added
as a part of the ERST implementation seems to be unused. Remove it.
CC: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Eric DeVolder <eric.devolder@oracle.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220223143322.927136-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Some small fixes for the qtests
* Misc header cleanups by Philippe
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmITejURHHRodXRoQHJl
ZGhhdC5jb20ACgkQLtnXdP5wLbUFaBAAsj/mMIHbP0pIetfbimxopqg85HhryO8R
P3a2k3+clN0dhIMaZKfnXKM2S03/xWDtXYATidiRpliRfaeZ8oPM9j3U1kqbsjQ9
u+IdVgYdy0ZoLINvSdLZQp+5ZdBL34KP7OYBdkJUyFV8n2CwFk9c/8tjazkqA3Il
8OwkrdMu+7E5KyhjeDByPAOyONN53vOZT4nXdD2EsQ7AbIzKfw41Bo2wJzJCOqB+
uX9JHv+mpKhhv5NZle/oaUF5lg+rqveg4LxSe8D9FIGfYiFMYG3HNq38St4NVXVc
knBqzQiQZm2MLviXQQ4ym9Q3BFd1QZLJH3TB9SfvJjGEvrErb0Xylcqra1EIxseG
xI34f9ER0usWSUcIe4t/WjzAjEr3ez+uDJ6ItNFRqPwsV4PGaSgP4auhNzMGlkTo
zr1O5o/hJdh3otDzM6Qu8FtnNUsKLb2KerveQW+a0uJj3BDKshbn7Au7d3+6eORJ
DuugBwzrtgvAKr1z/6pYFT8eXyhvI7w/rwtUJwNiBsHXvTBQ4UxEXlKpUCKqEQls
oqlTK3bezKJuURnuND88L410qUAuvTABjoYx9Y9abbrSqq91F/52bpB/jY2Lke+y
YoWPV13npdguG1eHB8DowF7MQRLVcULTshXLuM0A9NXkSLJfNY2gLb/I9+hXuQr0
PuLO5BfVyLE=
=/azS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2022-02-21' into staging
* Improve virtio-net failover test
* Some small fixes for the qtests
* Misc header cleanups by Philippe
# gpg: Signature made Mon 21 Feb 2022 11:40:37 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2022-02-21: (25 commits)
hw/tricore: Remove unused and incorrect header
hw/m68k/mcf: Add missing 'exec/hwaddr.h' header
exec/exec-all: Move 'qemu/log.h' include in units requiring it
softmmu/runstate: Clean headers
linux-user: Add missing "qemu/timer.h" include
target: Add missing "qemu/timer.h" include
core/ptimers: Remove unnecessary 'sysemu/cpus.h' include
exec/ramblock: Add missing includes
qtest: Add missing 'hw/qdev-core.h' include
hw/acpi/memory_hotplug: Remove unused 'hw/acpi/pc-hotplug.h' header
hw/remote: Add missing include
hw/tpm: Clean includes
scripts: Remove the old switch-timer-api script
tests/qtest: failover: migration abort test with failover off
tests/qtest: failover: test migration if the guest doesn't support failover
tests/qtest: failover: check migration with failover off
tests/qtest: failover: check missing guest feature
tests/qtest: failover: check the feature is correctly provided
tests/qtest: failover: use a macro for check_one_card()
tests/qtest: failover: clean up pathname of tests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20220207082756.82600-4-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This builds the ACPI ERST table to inform OSPM how to communicate
with the acpi-erst device.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-7-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This implements a PCI device for ACPI ERST. This implements the
non-NVRAM "mode" of operation for ERST as it is supported by
Linux and Windows.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1643402289-22216-6-git-send-email-eric.devolder@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit [2] broke original '\0' padding of OEM ID and OEM Table ID
fields in headers of ACPI tables. While it doesn't have impact on
default values since QEMU uses 6 and 8 characters long values
respectively, it broke usecase where IDs are provided on QEMU CLI.
It shouldn't affect guest (but may cause licensing verification
issues in guest OS).
One of the broken usecases is user supplied SLIC table with IDs
shorter than max possible length, where [2] mangles IDs with extra
spaces in RSDT and FADT tables whereas guest OS expects those to
mirror the respective values of the used SLIC table.
Fix it by replacing whitespace padding with '\0' padding in
accordance with [1] and expectations of guest OS
1) ACPI spec, v2.0b
17.2 AML Grammar Definition
...
//OEM ID of up to 6 characters. If the OEM ID is
//shorter than 6 characters, it can be terminated
//with a NULL character.
2)
Fixes: 602b458201 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/707
Reported-by: Dmitry V. Orekhov <dima.orekhov@gmail.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20220112130332.1648664-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Tested-by: Dmitry V. Orekhov dima.orekhov@gmail.com
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
Support CPU cluster topology level in generation of ACPI
Processor Properties Topology Table (PPTT).
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-6-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use g_queue APIs to reduce the nested loops and code indentation
with the processor hierarchy levels increasing. Consenquently,
it's more scalable to add new topology level to build_pptt.
No functional change intended.
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220107083232.16256-4-wangyanan55@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Get rid of the static variable that keeps track of whether hotplug has been
disabled on the root pci bus. Simply use qbus_is_hotpluggable() api to
perform the same check. This eliminates additional if conditional and
simplifies the function.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <1640764674-7784-1-git-send-email-ani@anirban.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
if QEMU is started with used provided SLIC table blob,
-acpitable sig=SLIC,oem_id='CRASH ',oem_table_id="ME",oem_rev=00002210,asl_compiler_id="",asl_compiler_rev=00000000,data=/dev/null
it will assert with:
hw/acpi/aml-build.c:61:build_append_padded_str: assertion failed: (len <= maxlen)
and following backtrace:
...
build_append_padded_str (array=0x555556afe320, str=0x555556afdb2e "CRASH ME", maxlen=0x6, pad=0x20) at hw/acpi/aml-build.c:61
acpi_table_begin (desc=0x7fffffffd1b0, array=0x555556afe320) at hw/acpi/aml-build.c:1727
build_fadt (tbl=0x555556afe320, linker=0x555557ca3830, f=0x7fffffffd318, oem_id=0x555556afdb2e "CRASH ME", oem_table_id=0x555556afdb34 "ME") at hw/acpi/aml-build.c:2064
...
which happens due to acpi_table_begin() expecting NULL terminated
oem_id and oem_table_id strings, which is normally the case, but
in case of user provided SLIC table, oem_id points to table's blob
directly and as result oem_id became longer than expected.
Fix issue by handling oem_id consistently and make acpi_get_slic_oem()
return NULL terminated strings.
PS:
After [1] refactoring, oem_id semantics became inconsistent, where
NULL terminated string was coming from machine and old way pointer
into byte array coming from -acpitable option. That used to work
since build_header() wasn't expecting NULL terminated string and
blindly copied the 1st 6 bytes only.
However commit [2] broke that by replacing build_header() with
acpi_table_begin(), which was expecting NULL terminated string
and was checking oem_id size.
1) 602b45820 ("acpi: Permit OEM ID and OEM table ID fields to be changed")
2)
Fixes: 4b56e1e4eb ("acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/786
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211227193120.1084176-2-imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Denis Lisov <dennis.lissov@gmail.com>
Tested-by: Alexander Tsoy <alexander@tsoy.me>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When bus is looked up on a pci write, we didn't
validate that the lookup succeeded.
Fuzzers thus can trigger QEMU crash by dereferencing the NULL
bus pointer.
Fixes: b32bd763a1 ("pci: introduce acpi-index property for PCI device")
Fixes: CVE-2021-4158
Cc: "Igor Mammedov" <imammedo@redhat.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/770
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Failover needs to detect the end of the PCI unplug to start migration
after the VFIO card has been unplugged.
To do that, a flag is set in pcie_cap_slot_unplug_request_cb() and reset in
pcie_unplug_device().
But since
17858a1695 ("hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35")
we have switched to ACPI unplug and these functions are not called anymore
and the flag not set. So failover migration is not able to detect if card
is really unplugged and acts as it's done as soon as it's started. So it
doesn't wait the end of the unplug to start the migration. We don't see any
problem when we test that because ACPI unplug is faster than PCIe native
hotplug and when the migration really starts the unplug operation is
already done.
See c000a9bd06 ("pci: mark device having guest unplug request pending")
a99c4da9fc ("pci: mark devices partially unplugged")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20211118133225.324937-4-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To solve issues [1-2] the Hot Plug Capable bit in PCIe Slots will be
turned on, while the switch to ACPI Hot-plug will be done in the
DSDT table.
Introducing 'x-keep-native-hpc' property disables the HPC bit only
in 6.1 and as a result keeps the forced 'reserve-io' on
pcie-root-ports in 6.1 too.
[1] https://gitlab.com/qemu-project/qemu/-/issues/641
[2] https://bugzilla.redhat.com/show_bug.cgi?id=2006409
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20211112110857.3116853-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a function that generates a Virtual I/O Translation table (VIOT),
describing the topology of paravirtual IOMMUs. The table is created if a
virtio-iommu device is present. It contains a virtio-iommu node and PCI
Range nodes for endpoints managed by the IOMMU. By default, a single
node describes all PCI devices. When passing the
"default_bus_bypass_iommu" machine option and "bypass_iommu" PXB option,
only buses that do not bypass the IOMMU are described by PCI Range
nodes.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20211026182024.2642038-2-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the Processor Properties Topology Table (PPTT) used to
describe CPU topology information to ACPI guests.
Note, a DT-boot Linux guest with a non-flat CPU topology will
see socket and core IDs being sequential integers starting
from zero, which is different from ACPI-boot Linux guest,
e.g. with -smp 4,sockets=2,cores=2,threads=1
a DT boot produces:
cpu: 0 package_id: 0 core_id: 0
cpu: 1 package_id: 0 core_id: 1
cpu: 2 package_id: 1 core_id: 0
cpu: 3 package_id: 1 core_id: 1
an ACPI boot produces:
cpu: 0 package_id: 36 core_id: 0
cpu: 1 package_id: 36 core_id: 1
cpu: 2 package_id: 96 core_id: 2
cpu: 3 package_id: 96 core_id: 3
This is due to several reasons:
1) DT cpu nodes do not have an equivalent field to what the PPTT
ACPI Processor ID must be, i.e. something equal to the MADT CPU
UID or equal to the UID of an ACPI processor container. In both
ACPI cases those are platform dependant IDs assigned by the
vendor.
2) While QEMU is the vendor for a guest, if the topology specifies
SMT (> 1 thread), then, with ACPI, it is impossible to assign a
core-id the same value as a package-id, thus it is not possible
to have package-id=0 and core-id=0. This is because package and
core containers must be in the same ACPI namespace and therefore
must have unique UIDs.
3) ACPI processor containers are not mandatorily required for PPTT
tables to be used and, due to the limitations of which IDs are
selected described above in (2), they are not helpful for QEMU,
so we don't build them with this patch. In the absence of them,
Linux assigns its own unique IDs. The maintainers have chosen not
to use counters from zero, but rather ACPI table offsets, which
explains why the numbers are so much larger than with DT.
4) When there is no SMT (threads=1) the core IDs for ACPI boot guests
match the logical CPU IDs, because these IDs must be equal to the
MADT CPU UID (as no processor containers are present), and QEMU
uses the logical CPU ID for these MADT IDs.
So in summary, with QEMU as the vendor for the guests, we simply
use sequential integers starting from zero for the non-leaf nodes
but with ID-valid flag unset, so that guest will ignore them and
use table offsets as unique container IDs. And we use logical CPU
IDs for the leaf nodes with the ID-valid flag set, which will be
consistent with MADT.
Currently the implementation of PPTT generation complies with ACPI
specification 5.2.29 (Revision 6.3). The 6.3 spec can be found at:
https://uefi.org/sites/default/files/resources/ACPI_6_3_May16.pdf
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20211020142125.7516-6-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a generic API to build Processor hierarchy node structure (Type 0),
which is strictly consistent with descriptions in ACPI 6.3: 5.2.29.1.
This function will be used to build ACPI PPTT table for cpu topology.
Co-developed-by: Ying Fang <fangying1@huawei.com>
Co-developed-by: Henglong Fan <fanhenglong@huawei.com>
Co-developed-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20211020142125.7516-5-wangyanan55@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210624110415.187164-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-35-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of composing disabled _MAT entry and then later on
patching it to enabled for hotpluggbale CPUs in DSDT,
set it to enabled at the time _MAT entry is built.
It will allow to drop usage of packed structures in
following patches when build_madt() is switched to use
build_append_int_noprefix() API.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-24-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Drop usage of packed structures and explicit endian conversions
when building SRAT tables for arm/x86 and use endian agnostic
build_append_int_noprefix() API to build it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-18-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-13-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-12-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Also since acpi_table_begin() reserves space only for standard header
while previous acpi_data_push() reserved the header + 4 bytes field,
add 4 bytes 'Reserved' field into nvdimm_build_nfit() which didn't
have it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Also since acpi_table_begin() reserves space only for standard header
while previous acpi_data_push() reserved the header + 4 bytes field,
add 4 bytes 'Reserved' field into hmat_build_table_structs()
which didn have it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-9-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-8-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-7-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.
While at it switch to build_append_int_noprefix() to build
entries to other tables (which also removes some manual offset
calculations).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offests magic from API user.
While at it switch to build_append_int_noprefix() to build
entries to other tables (which also removes some manual offset
calculations).
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Patch introduces acpi_table_begin()/ acpi_table_end() API
that hides pointer/offset arithmetic from user as opposed
to build_header(), to prevent errors caused by it [1].
acpi_table_begin():
initializes table header and keeps track of
table data/offsets
acpi_table_end():
sets actual table length and tells bios loader
where table is for the later initialization on
guest side.
1) commits
bb9feea431 x86: acpi: use offset instead of pointer when using build_header()
4d027afeb3 Virt: ACPI: fix qemu assert due to re-assigned table data address
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20210924122802.1455362-2-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Yanan Wang <wangyanan55@huawei.com>
MEM_UNPLUG_ERROR is deprecated since the introduction of
DEVICE_UNPLUG_GUEST_ERROR. Keep emitting both while the deprecation of
MEM_UNPLUG_ERROR is pending.
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210907004755.424931-8-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
qapi_event_send_mem_unplug_error() deals with @device being NULL by
replacing it with an empty string ("") when emitting the event. Aside
from the fact that this behavior (qapi visitor mapping NULL pointer to
"") can be patched/changed someday, there's also the lack of utility
that the event brings to listeners, e.g. "a memory unplug error happened
somewhere".
In theory we should just avoit emitting this event at all if dev->id is
NULL, but this would be an incompatible change to existing guests.
Instead, let's make the forementioned behavior explicit: if dev->id is
NULL, pass an empty string to qapi_event_send_mem_unplug_error().
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20210907004755.424931-2-danielhb413@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There is no need to use fresh typecasts to get references to pci device structs
when there is an existing reference to pci device struct. Use existing reference.
Minor cleanup.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210825031949.919376-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently various acpi hotplug modules like cpu hotplug, memory hotplug, pci
hotplug, nvdimm hotplug are all pulled in when CONFIG_ACPI_X86 is turned on.
This brings in support for whole lot of subsystems that some targets like
mips does not need. They are added just to satisfy symbol dependencies. This
is ugly and should be avoided. Targets should be able to pull in just what they
need and no more. For example, mips only needs support for PIIX4 and does not
need acpi pci hotplug support or cpu hotplug support or memory hotplug support
etc. This change is an effort to clean this up.
In this change, new config variables are added for various acpi hotplug
subsystems. Targets like mips can only enable PIIX4 support and not the rest
of all the other modules which were being previously pulled in as a part of
CONFIG_ACPI_X86. Function stubs make sure that symbols which piix4 needs but
are not required by mips (for example, symbols specific to pci hotplug etc)
are available to satisfy the dependencies.
Currently, this change only addresses issues with mips malta targets. In future
we might be able to clean up other targets which are similarly pulling in lot
of unnecessary hotplug modules by enabling ACPI_X86.
This change should also address issues such as the following:
https://gitlab.com/qemu-project/qemu/-/issues/221https://gitlab.com/qemu-project/qemu/-/issues/193
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210812071409.492299-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that we have "acpi-pci-hotplug-with-bridge-support" PIIX4 PM property being
used for both q35 and i440fx machine types, it is better that we defined this
property string at a single place within a header file like other PIIX4
properties. We can then use this single definition at all the places that needs
it instead of duplicating the string everywhere. While at it, this change also
adds a definition for "acpi-root-pci-hotplug" PIIX4 PM property and uses
this definition at all places that were formally using the string value.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20210816083214.105740-1-ani@anisinha.ca>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The 'microvm' machine misses various dependencies:
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm':
hw/i386/acpi-microvm.c:247: undefined reference to `acpi_build_tables_init'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm':
hw/i386/acpi-microvm.c:192: undefined reference to `bios_linker_loader_alloc'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm':
hw/i386/acpi-microvm.c:121: undefined reference to `init_aml_allocator'
/usr/bin/ld: hw/i386/acpi-microvm.c:124: undefined reference to `acpi_data_push'
/usr/bin/ld: hw/i386/acpi-microvm.c:126: undefined reference to `aml_scope'
/usr/bin/ld: hw/i386/acpi-microvm.c:129: undefined reference to `build_ged_aml'
/usr/bin/ld: hw/i386/acpi-microvm.c:131: undefined reference to `acpi_dsdt_add_power_button'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_virtio':
hw/i386/acpi-microvm.c:77: undefined reference to `aml_string'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `build_dsdt_microvm':
hw/i386/acpi-microvm.c:138: undefined reference to `aml_scope'
/usr/bin/ld: hw/i386/acpi-microvm.c:149: undefined reference to `build_header'
/usr/bin/ld: hw/i386/acpi-microvm.c:152: undefined reference to `free_aml_allocator'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_build_microvm':
hw/i386/acpi-microvm.c:202: undefined reference to `acpi_add_table'
/usr/bin/ld: hw/i386/acpi-microvm.c:203: undefined reference to `build_fadt'
/usr/bin/ld: hw/i386/acpi-microvm.c:206: undefined reference to `acpi_add_table'
/usr/bin/ld: hw/i386/acpi-microvm.c:207: undefined reference to `acpi_build_madt'
/usr/bin/ld: hw/i386/acpi-microvm.c:212: undefined reference to `build_xsdt'
/usr/bin/ld: hw/i386/acpi-microvm.c:224: undefined reference to `build_rsdp'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_setup_microvm':
hw/i386/acpi-microvm.c:251: undefined reference to `acpi_add_rom_blob'
/usr/bin/ld: hw/i386/acpi-microvm.c:253: undefined reference to `acpi_add_rom_blob'
/usr/bin/ld: hw/i386/acpi-microvm.c:255: undefined reference to `acpi_add_rom_blob'
/usr/bin/ld: hw/i386/acpi-microvm.c:258: undefined reference to `acpi_build_tables_cleanup'
/usr/bin/ld: libqemu-i386-softmmu.fa.p/hw_i386_acpi-microvm.c.o: in function `acpi_dsdt_add_pci':
hw/i386/acpi-microvm.c:105: undefined reference to `acpi_dsdt_add_gpex'
collect2: error: ld returned 1 exit status
ninja: build stopped: subcommand failed.
Update the ACPI_HW_REDUCED symbol to select ACPI_MEMORY_HOTPLUG /
ACPI_NVDIMM / ACPI.
Fixes: 8045df14bc ("microvm/acpi: add minimal acpi support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-23-philmd@redhat.com>
ACPI core routines (in core.c) are not really x86-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20210616204328.2611406-21-philmd@redhat.com>
Q35 has three different types of PCI devices hot-plug: PCIe Native,
SHPC Native and ACPI hot-plug. This patch changes the default choice
for cold-plugged bridges from PCIe Native to ACPI Hot-plug with
ability to use SHPC and PCIe Native for hot-plugged bridges.
This is a list of the PCIe Native hot-plug issues that led to this
change:
* no racy behavior during boot (see 110c477c2e)
* no delay during deleting - after the actual power off software
must wait at least 1 second before indicating about it. This case
is quite important for users, it even has its own bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1594168
* no timer-based behavior - in addition to the previous example,
the attention button has a 5-second waiting period, during which
the operation can be canceled with a second press. While this
looks fine for manual button control, automation will result in
the need to queue or drop events, and the software receiving
events in all sort of unspecified combinations of attention/power
indicator states, which is racy and uppredictable.
* fixes:
* https://bugzilla.redhat.com/show_bug.cgi?id=1752465
* https://bugzilla.redhat.com/show_bug.cgi?id=1690256
To return to PCIe Native hot-plug:
-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off
Known issue: older linux guests need the following flag
to allow hotplugged pci express devices to use io:
-device pcie-root-port,io-reserve=4096.
io is unusual for pci express so this seems minor.
We'll fix this by a follow up patch.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210713004205.775386-6-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Instead of changing the hot-plug type in _OSC register, do not
set the 'Hot-Plug Capable' flag. This way guest will choose ACPI
hot-plug if it is preferred and leave the option to use SHPC with
pcie-pci-bridge.
The ability to control hot-plug for each downstream port is retained,
while 'hotplug=off' on the port means all hot-plug types are disabled.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210713004205.775386-4-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add acpi_pcihp to ich9_pm as part of
'acpi-pci-hotplug-with-bridge-support' option. Set default to false.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210713004205.775386-3-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Implement notifications and gpe to support q35 ACPI PCI hot-plug.
Use 0xcc4 - 0xcd7 range for 'acpi-pci-hotplug' io ports.
Signed-off-by: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20210713004205.775386-2-jusual@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reset requests should use SHUTDOWN_CAUSE_GUEST_RESET not
SHUTDOWN_CAUSE_GUEST_SHUTDOWN.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210624110057.2398779-1-kraxel@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow code elsewhere in the system to check whether the ACPI GHES
table is present, so it can determine whether it is OK to try to
record an error by calling acpi_ghes_record_errors().
(We don't need to migrate the new 'present' field in AcpiGhesState,
because it is set once at system initialization and doesn't change.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-3-peter.maydell@linaro.org
Generic code in target/arm wants to call acpi_ghes_record_errors();
provide a stub version so that we don't fail to link when
CONFIG_ACPI_APEI is not set. This requires us to add a new
ghes-stub.c file to contain it and the meson.build mechanics
to use it when appropriate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Dongjiu Geng <gengdongjiu1@gmail.com>
Message-id: 20210603171259.27962-2-peter.maydell@linaro.org
Cc: M: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210614191335.1968807-4-stefanb@linux.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 6e8a3ff6ed ("docs/specs/tpm: reST-ify TPM documentation")
converted docs/specs/tpm.txt to docs/specs/tpm.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tpm.txt/tpm.rst/ $(git grep -l docs/specs/tpm.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-5-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmCeiMEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpqsIH/A49Av5Bv8huL75lf9GzCx3E1a/z2W9Fphik
OcQ1ahR+7CRDARub+vTG40MBmZBVefIWjLAj3BwBWzFGPX0DZq0zeI102VzlEVKY
OeUx8ixuiKOSLcS+QxE7ZXIBL2Pn7l+MFUi4nLMYKti7c/kola7zlB57qsmXh+VD
AOQ7Utj6NWoi6QocWJsMSCyHCh3Fk9QzcStLlr6/MkSJa1zqv8l22+8oWH07Fk2M
wZfhrm9k094on28iSejsFYL5e4ROeXUajbOdfyMIxWvAB7boC9Jxk/e0oAbuSB4y
2f71Gfk3mU6irS7PvrxcKbk6BVD2zxM2WumOchZJgxFAujDO6yg=
=fvkT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,virtio: bugfixes, improvements
Fixes all over the place. Faster boot for virtio. ioeventfd support for
mmio.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 14 May 2021 15:27:13 BST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
Fix build with 64 bits time_t
vhost-vdpa: Make vhost_vdpa_get_device_id() static
hw/virtio: enable ioeventfd configuring for mmio
hw/smbios: support for type 41 (onboard devices extended information)
checkpatch: Fix use of uninitialized value
virtio-scsi: Configure all host notifiers in a single MR transaction
virtio-scsi: Set host notifiers and callbacks separately
virtio-blk: Configure all host notifiers in a single MR transaction
virtio-blk: Fix rollback path in virtio_blk_data_plane_start()
pc-dimm: remove unnecessary get_vmstate_memory_region() method
amd_iommu: fix wrong MMIO operations
virtio-net: Constify VirtIOFeature feature_sizes[]
virtio-blk: Constify VirtIOFeature feature_sizes[]
hw/virtio: Pass virtio_feature_get_config_size() a const argument
x86: acpi: use offset instead of pointer when using build_header()
amd_iommu: Fix pte_override_page_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/virt.c
Do the same as in commit
(4d027afeb3 Virt: ACPI: fix qemu assert due to re-assigned table data address)
for remaining tables that happen to use saved at
the beginning pointer to build header to avoid assert
when table_data is relocated due to implicit re-size.
In this case user is trying to start Windows 10 and getting assert at
hw/acpi/bios-linker-loader.c:239:
bios_linker_loader_add_checksum: Assertion `start_offset < file->blob->len' failed.
Fixes: https://bugs.launchpad.net/bugs/1923497
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210414084356.3792113-1-imammedo@redhat.com>
Cc: mst@redhat.com, qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Stop including hw/boards.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-3-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Commit 6be8cf56bc made sure that SCI is enabled in PM1.CNT
on reset in acpi_only mode by modifying acpi_pm1_cnt_reset() and
that worked for q35 as expected.
The function was introduced by commit
eaba51c573 (acpi, acpi_piix, vt82c686: factor out PM1_CNT logic)
that forgot to actually call it at piix4 reset time and as result
SCI_EN wasn't set as was expected by 6be8cf56bc in acpi_only mode.
So Windows crashes when it notices that SCI_EN is not set and FADT is
not providing information about how to enable it anymore.
Reproducer:
qemu-system-x86_64 -enable-kvm -M pc-i440fx-6.0,smm=off -cdrom any_windows_10x64.iso
Fix it by calling acpi_pm1_cnt_reset() at piix4 reset time.
Occasionally this patch adds reset acpi PM related registers on
piix4 reset time and de-assert sci.
piix4_pm_realize() initializes acpi pm tmr, evt, cnt and gpe.
Reset them on device reset. pm_reset() in ich9.c correctly calls
corresponding reset functions.
Fixes: 6be8cf56bc (acpi/core: always set SCI_EN when SMM isn't supported)
Reported-by: Reinoud Zandijk <reinoud@NetBSD.org>
Co-developed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <8a5bbd19727045ec863523830078dd4ca63f6a9a.1616532563.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's also set a maximum size for "etc/acpi/rsdp", so the maximum
size doesn't get implicitly set based on the initial table size. In my
experiments, the table size was in the range of 22 bytes, so a single
page (== what we used until now) seems to be good enough.
Now that we have defined maximum sizes for all currently used table types,
let's assert that we catch usage with new tables that need a proper maximum
size definition.
Also assert that our initial size does not exceed the maximum size; while
qemu_ram_alloc_internal() properly asserts that the initial RAMBlock size
is <= its maximum size, the result might differ when the host page size
is bigger than 4k.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-5-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to have safety margins for all tables based on the table type.
Let's move the maximum size logic into acpi_add_rom_blob() and make it
dependent on the table name, so we don't have to replicate for each and
every instance that creates such tables.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210304105554.121674-4-david@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it will be used by follow up patches
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it helps to avoid device naming conflicts when guest OS is
configured to use acpi-index for naming.
Spec ialso says so:
PCI Firmware Specification Revision 3.2
4.6.7. _DSM for Naming a PCI or PCI Express Device Under Operating Systems
"
Instance number must be unique under \_SB scope. This instance number does not have to
be sequential in a given system configuration.
"
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In x86/ACPI world, linux distros are using predictable
network interface naming since systemd v197. Which on
QEMU based VMs results into path based naming scheme,
that names network interfaces based on PCI topology.
With itm on has to plug NIC in exactly the same bus/slot,
which was used when disk image was first provisioned/configured
or one risks to loose network configuration due to NIC being
renamed to actually used topology.
That also restricts freedom to reshape PCI configuration of
VM without need to reconfigure used guest image.
systemd also offers "onboard" naming scheme which is
preferred over PCI slot/topology one, provided that
firmware implements:
"
PCI Firmware Specification 3.1
4.6.7. DSM for Naming a PCI or PCI Express Device Under
Operating Systems
"
that allows to assign user defined index to PCI device,
which systemd will use to name NIC. For example, using
-device e1000,acpi-index=100
guest will rename NIC to 'eno100', where 'eno' is default
prefix for "onboard" naming scheme. This doesn't require
any advance configuration on guest side to com in effect
at 'onboard' scheme takes priority over path based naming.
Hope is that 'acpi-index' it will be easier to consume by
management layer, compared to forcing specific PCI topology
and/or having several disk image templates for different
topologies and will help to simplify process of spawning
VM from the same template without need to reconfigure
guest NIC.
This patch adds, 'acpi-index'* property and wires up
a 32bit register on top of pci hotplug register block
to pass index value to AML code at runtime.
Following patch will add corresponding _DSM code and
wire it up to PCI devices described in ACPI.
*) name comes from linux kernel terminology
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20210315180102.3008391-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If SMM is not supported, ACPI fixed hardware doesn't support
legacy-mode. ACPI-only platform. Where SCI_EN in PM1_CNT register is
always set.
The bit tells OS legacy mode(SCI_EN cleared) or ACPI mode(SCI_EN set).
With the next patch (setting fadt.smi_cmd = 0 when smm isn't enabled),
guest Linux tries to switch to ACPI mode, finds smi_cmd = 0, and then
fails to initialize acpi subsystem. This patch proactively fixes it.
This patch changes guest ABI. To keep compatibility, use
"smm-compat" introduced by earlier patch. If the property is true,
disable new behavior.
ACPI spec 4.8.10.1 PM1 Event Grouping
PM1 Eanble Registers
> For ACPI-only platforms (where SCI_EN is always set)
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <500f62081626997e46f96377393d3662211763a8.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patch will introduce incompatible behavior of SMM.
Introduce a property to keep the old behavior for compatibility.
To enable smm compat, use "-global ICH9-LPC.smm-compat=on" or
"-global PIIX4_PM.smm-compat=on"
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <47254ae0b8c6cc6945422978b6b2af2d213ef891.1613615732.git.isaku.yamahata@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Qemu's ACPI table generation sets the fields OEM ID and OEM table ID
to "BOCHS " and "BXPCxxxx" where "xxxx" is replaced by the ACPI
table name.
Some games like Red Dead Redemption 2 seem to check the ACPI OEM ID
and OEM table ID for the strings "BOCHS" and "BXPC" and if they are
found, the game crashes(this may be an intentional detection
mechanism to prevent playing the game in a virtualized environment).
This patch allows you to override these default values.
The feature can be used in this manner:
qemu -machine oem-id=ABCDEF,oem-table-id=GHIJKLMN
The oem-id string can be up to 6 bytes in size, and the
oem-table-id string can be up to 8 bytes in size. If the string are
smaller than their respective sizes they will be padded with space.
If either of these parameters is not set, the current default values
will be used for the one missing.
Note that the the OEM Table ID field will not be extended with the
name of the table, but will use either the default name or the user
provided one.
This does not affect the -acpitable option (for user-defined ACPI
tables), which has precedence over -machine option.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Message-Id: <20210119003216.17637-3-posteuca@mutex.one>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
AML needs Address Translation offset to describe how a bridge translates
addresses accross the bridge when using an address descriptor, and
especially on ARM, the translation offset of pio resource is usually
non zero.
Therefore, it's necessary to pass offset for pio, mmio32, mmio64 and bus
number into build_crs.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-4-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
if firmware and QEMU negotiated CPU hotunplug support, generate
_EJ0 method so that it will mark CPU for removal by firmware and
pass control to it by triggering SMI.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds bit #4 to status/control field of CPU hotplug MMIO interface.
New bit will be used OSPM to mark CPUs as pending for removal by firmware,
when it calls _EJ0 method on CPU device node. Later on, when firmware
sees this bit set, it will perform CPU eject which will clear bit #4
as well.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-3-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extract crs build form acpi_build.c, the function could also be used
to build the crs for pxbs for arm. The resources are composed by two parts:
1. The bar space of pci-bridge/pcie-root-ports
2. The resources needed by devices behind PXBs.
The base and limit of memory/io are obtained from the config via two APIs:
pci_bridge_get_base and pci_bridge_get_limit
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-5-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
This patch contains all the files, whose maintainer I could not get
from ‘get_maintainer.pl’ script.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Adapted exec.c and qdev-monitor.c to new location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123749.19941-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There is a field with vmstate_ghes_state as vmsd in vmstate_ghes_state,
which will lead to infinite recursion in dump_vmstate_vmsd.
Fixes: a08a64627b ("ACPI: Record the Generic Error Status Block address")
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201112020638.874515-1-liangpeng10@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix code style. Operator needs spaces both sides.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-Id: <20201103102634.273021-3-zhangxinhao1@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix code style. Space required before the open parenthesis '('.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-Id: <20201103102634.273021-2-zhangxinhao1@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix code style. Don't use '#' flag of printf format ('%#') in
format strings, use '0x' prefix instead
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-Id: <20201103102634.273021-1-zhangxinhao1@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add stubs for aml_interrupt and aml_memory32_fixed,
these will be needed by followup patches,
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-2-kraxel@redhat.com
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the memory commands to machine.json pulls less
QAPI-generated code into user-mode.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-7-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.
Restricting the query-vm-generation-id command to machine.json pulls
less QAPI-generated code into user-mode.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-5-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
When acpi hotplug is turned off for both root pci bus as well as for pci
bridges, we should not generate the related ACPI code for DSDT table or
initialize related hw ports or reserve hw resources. This change makes
sure all those operations are turned off in the case ACPI pci hotplug is
off globally.
In this change, we also make sure ACPI code for the PCNT method are only
added when bsel is enabled for the corresponding pci bus or bridge hotplug
is turned on.
As q35 machines do not use bsel for it's pci buses at this point in time, this
change affects DSDT acpi table for q35 machines as well. Therefore, we will
also need to commit the updated golden master DSDT table acpi binary blobs as
well. Following is the list of blobs which needs updating:
tests/data/acpi/q35/DSDT
tests/data/acpi/q35/DSDT.acpihmat
tests/data/acpi/q35/DSDT.bridge
tests/data/acpi/q35/DSDT.cphp
tests/data/acpi/q35/DSDT.dimmpxm
tests/data/acpi/q35/DSDT.ipmibt
tests/data/acpi/q35/DSDT.memhp
tests/data/acpi/q35/DSDT.mmio64
tests/data/acpi/q35/DSDT.numamem
tests/data/acpi/q35/DSDT.tis
These tables are updated in the following commit. Without the updated table
blobs, the unit tests would fail with this patch.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-11-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When ACPI hotplug for the root bus is disabled, the bsel property for that
bus is not set. Please see the following commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus").
As a result, when acpi_pcihp_find_hotplug_bus() is called
with bsel set to 0, it may return the root bus. This can cause devices
attached to the root bus to get hot-unplugged if the user issues the following
set of commmands:
outl 0xae10 0
outl 0xae08 your_slot
Thanks to Julia for pointing this out here:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg734548.html
In this patch, we fix the issue in this function by checking if the bus which
is returned by the function is actually hotpluggable. If not, we simply return
NULL. This avoids the scenario where we were returning a non-hotpluggable bus.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case firmware has negotiated CPU hotplug SMI feature, generate
AML to describe SMI IO port region and send SMI to firmware
on each CPU hotplug SCI in case new CPUs were hotplugged.
Since new CPUs can be hotplugged while CPU_SCAN_METHOD is running
we can't send SMI before new CPUs are fetched from QEMU as it
could cause sending Notify to a CPU that firmware hasn't seen yet.
So fetch new CPUs into local cache first, then send SMI and
after that send Notify events to cached CPUs. This should ensure
that Notify is sent only to CPUs which were processed by firmware
first.
Any CPUs that were hotplugged after caching will be processed
by the next CPU_SCAN_METHOD, when pending SCI is handled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-10-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPU hot-unplug with SMM requires firmware participation to prevent
guest crash (i.e. CPU can be removed only after OS _and_ firmware
were prepared for the action).
Previous patches introduced ICH9_LPC_SMI_F_CPU_HOT_UNPLUG_BIT
feature bit, which is advertised by firmware when it has support
for CPU hot-unplug. Use it to check if guest is able to handle
unplug and make device_del fail gracefully if hot-unplug feature
hasn't been negotiated.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-4-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There were reports of guest crash on CPU hotplug, when using q35 machine
type and OVMF with SMM, due to hotplugged CPU trying to process SMI at
default SMI handler location without it being relocated by firmware first.
Fix it by refusing hotplug if firmware hasn't negotiated CPU hotplug with
SMI support while SMI broadcast is in use.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200923094650.1301166-3-imammedo@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will make the type name constant consistent with the name of
the type checking macro.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902224311.1321159-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We introduce a new global flag 'acpi-root-pci-hotplug' for i440fx with which
we can turn on or off PCI device hotplug on the root bus. This flag can be
used to prevent all PCI devices from getting hotplugged or unplugged from the
root PCI bus.
This feature is targetted mostly towards Windows VMs. It is useful in cases
where some hypervisor admins want to deploy guest VMs in a way so that the
users of the guest OSes are not able to hot-eject certain PCI devices from
the Windows system tray. Laine has explained the use case here in detail:
https://www.redhat.com/archives/libvir-list/2020-February/msg00110.html
Julia has resolved this issue for PCIE buses with the following commit:
530a096318 ("pcie_root_port: Add hotplug disabling option")
This commit attempts to introduce similar behavior for PCI root buses used in
i440fx machine types (although in this case, we do not have a per-slot
capability to turn hotplug on or off).
Usage:
-global PIIX4_PM.acpi-root-pci-hotplug=off
By default, this option is enabled which means that hotplug is turned on for
the PCI root bus.
The previously existing flag 'acpi-pci-hotplug-with-bridge-support' for PCI-PCI
bridges remain as is and can be used along with this new flag to control PCI
hotplug on PCI bridges.
This change has been tested using a Windows 2012R2 server guest image and also
with a Windows 2019 server guest image on a Ubuntu 18.04 host using the latest
master qemu from upstream.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20200821165403.26589-1-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
data_length is a constant value, so we use assert instead of
condition check.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 20200622113146.33421-1-gengdongjiu@huawei.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert
visit_type_FOO(v, ..., &ptr, &err);
...
if (err) {
...
}
to
visit_type_FOO(v, ..., &ptr, errp);
...
if (!ptr) {
...
}
for functions that set @ptr to non-null / null on success / error.
Eliminate error_propagate() that are now unnecessary. Delete @err
that are now unused.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-40-armbru@redhat.com>
Replace
error_setg(&err, ...);
error_propagate(errp, err);
by
error_setg(errp, ...);
Related pattern:
if (...) {
error_setg(&err, ...);
goto out;
}
...
out:
error_propagate(errp, err);
return;
When all paths to label out are that way, replace by
if (...) {
error_setg(errp, ...);
return;
}
and delete the label along with the error_propagate().
When we have at most one other path that actually needs to propagate,
and maybe one at the end that where propagation is unnecessary, e.g.
foo(..., &err);
if (err) {
goto out;
}
...
bar(..., &err);
out:
error_propagate(errp, err);
return;
move the error_propagate() to where it's needed, like
if (...) {
foo(..., &err);
error_propagate(errp, err);
return;
}
...
bar(..., errp);
return;
and transform the error_setg() as above.
In some places, the transformation results in obviously unnecessary
error_propagate(). The next few commits will eliminate them.
Bonus: the elimination of gotos will make later patches in this series
easier to review.
Candidates for conversion tracked down with this Coccinelle script:
@@
identifier err, errp;
expression list args;
@@
- error_setg(&err, args);
+ error_setg(errp, args);
... when != err
error_propagate(errp, err);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-34-armbru@redhat.com>
The object_property_set_FOO() setters take property name and value in
an unusual order:
void object_property_set_FOO(Object *obj, FOO_TYPE value,
const char *name, Error **errp)
Having to pass value before name feels grating. Swap them.
Same for object_property_set(), object_property_get(), and
object_property_parse().
Convert callers with this Coccinelle script:
@@
identifier fun = {
object_property_get, object_property_parse, object_property_set_str,
object_property_set_link, object_property_set_bool,
object_property_set_int, object_property_set_uint, object_property_set,
object_property_set_qobject
};
expression obj, v, name, errp;
@@
- fun(obj, v, name, errp)
+ fun(obj, name, v, errp)
Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error
message "no position information". Convert that one manually.
Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by
ARMSSE being used both as typedef and function-like macro there.
Convert manually.
Fails to convert hw/rx/rx-gdbsim.c, because Coccinelle gets confused
by RXCPU being used both as typedef and function-like macro there.
Convert manually. The other files using RXCPU that way don't need
conversion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-27-armbru@redhat.com>
[Straightforwad conflict with commit 2336172d9b "audio: set default
value for pcspk.iobase property" resolved]
qbus_set_hotplug_handler() is a simple wrapper around
object_property_set_link().
object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails. These are all programming
errors here, so passing &error_abort to qbus_set_hotplug_handler() is
appropriate.
Most of its callers do. Exceptions:
* pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL,
i.e. they ignore errors.
* spapr_machine_init() passes &error_fatal.
* s390_pcihost_realize(), virtio_serial_device_realize(),
s390_pcihost_plug() pass the error to their callers. The latter two
keep going after the error, which looks wrong.
Drop the @errp parameter, and instead pass &error_abort to
object_property_set_link().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
Currently, the option use_acpi_pci_hotplug is being used to control device
hotplug capability using ACPI for slots of cold plugged bridges. Hence, we
are renaming this option to better reflect what it actually does.
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Message-Id: <1592310699-58916-1-git-send-email-ani.sinha@nutanix.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Ani Sinha <ani.sinha@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove any reference to Acpi20TPM2 and adopt an implementation
similar to build_ghes_v2().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622140620.17229-2-eric.auger@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds support for memory(pc-dimm) hot remove on arm/virt that
uses acpi ged device.
NVDIMM hot removal is not yet supported.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Message-id: 20200622124157.20360-1-shameerali.kolothum.thodi@huawei.com
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename memory region and callbacks and ops to carry "evt" in the name
because a second region will be added shortly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200520132003.9492-10-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedow <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add fields to struct AcpiFadtData and update build_fadt() to properly
generate sleep register entries.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200520132003.9492-9-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This code is not related to hardware emulation.
Move it under accel/ with the other hypervisors.
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200508100222.7112-1-philmd@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a TPM2 ACPI table if a TPM2.0 sysbus device has been
dynamically instantiated.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-4-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We plan to build the TPM2 table on ARM too. In order to reuse the
generation code, let's move build_tpm2() to aml-build.c.
No change in the implementation.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200601095737.32671-3-eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
NVDIMMs can belong to their own proximity domains, as described by the
NFIT. In such cases, the SRAT needs to have Memory Affinity structures
in the SRAT for these NVDIMMs, otherwise Linux doesn't populate node
data structures properly during NUMA initialization. See the following
for an example failure case.
https://lore.kernel.org/linux-nvdimm/20200416225438.15208-1-vishal.l.verma@intel.com/
Introduce a new helper, nvdimm_build_srat(), and call it for both the
i386 and arm versions of 'build_srat()' to augment the SRAT with
memory affinity information for NVDIMMs.
The relevant command line options to exercise this are below. Nodes 0-1
contain CPUs and regular memory, and nodes 2-3 are the NVDIMM address
space.
-object memory-backend-ram,id=mem0,size=2048M
-numa node,nodeid=0,memdev=mem0,
-numa cpu,node-id=0,socket-id=0
-object memory-backend-ram,id=mem1,size=2048M
-numa node,nodeid=1,memdev=mem1,
-numa cpu,node-id=1,socket-id=1
-numa node,nodeid=2,
-object memory-backend-file,id=nvmem0,share,mem-path=nvdimm-0,size=16384M,align=1G
-device nvdimm,memdev=nvmem0,id=nv0,label-size=2M,node=2
-numa node,nodeid=3,
-object memory-backend-file,id=nvmem1,share,mem-path=nvdimm-1,size=16384M,align=1G
-device nvdimm,memdev=nvmem1,id=nv1,label-size=2M,node=3
Cc: Jingqi Liu <jingqi.liu@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Message-Id: <20200606000911.9896-3-vishal.l.verma@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
kvm_arch_on_sigbus_vcpu() error injection uses source_id as
index in etc/hardware_errors to find out Error Status Data
Block entry corresponding to error source. So supported source_id
values should be assigned here and not be changed afterwards to
make sure that guest will write error into expected Error Status
Data Block.
Before QEMU writes a new error to ACPI table, it will check whether
previous error has been acknowledged. If not acknowledged, the new
errors will be ignored and not be recorded. For the errors section
type, QEMU simulate it to memory section error.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-9-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record the GHEB address via fw_cfg file, when recording
a error to CPER, it will use this address to find out
Generic Error Data Entries and write the error.
In order to avoid migration failure, make hardware
error table address to a part of GED device instead
of global variable, then this address will be migrated
to target QEMU.
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs.
Now it only supports ARMv8 SEA, a type of Generic Hardware Error
Source version 2(GHESv2) error source. Afterwards, we can extend
the supported types if needed. For the CPER section, currently it
is memory section because kernel mainly wants userspace to handle
the memory errors.
This patch follows the spec ACPI 6.2 to build the Hardware Error
Source table. For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
build_ghes_hw_error_notification() helper will help to add Hardware
Error Notification to ACPI tables without using packed C structures
and avoid endianness issues as API doesn't need explicit conversion.
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds error_block_address and read_ack_register fields
in hardware errors table , the error_block_address points to Generic
Error Status Block(GESB) via bios_linker. The max size for one GESB
is 1kb, For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
Now we only support one Error source, if necessary, we can extend to
support more.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The little end UUID is used in many places, so make
NVDIMM_UUID_LE to a common macro to convert the UUID
to a little end array.
Reviewed-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 20200512030609.19593-2-gengdongjiu@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for nvdimm hotplug events through GED
and enables nvdimm for the arm/virt. Now Guests with ACPI
can have both cold and hot plug of nvdimms.
Hot removal functionality is not yet supported.
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20200421125934.14952-5-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch makes IO base and size configurable to create NPIO AML for
ACPI NFIT. Since a different architecture like AArch64 does not use
port-mapped IO, a configurable IO base is required to create correct
mapping of ACPI IO address and size.
Signed-off-by: Kwangwoo Lee <kwangwoo.lee@sk.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-3-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per ACPI spec 6.3, Table 19-419 Object Conversion Rules, if
the Buffer Field <= to the size of an Integer (in bits), it will
be treated as an integer. Moreover, the integer size depends on
DSDT tables revision number. If revision number is < 2, integer
size is 32 bits, otherwise it is 64 bits. Current NVDIMM common
DSM aml code (NCAL) uses CreateField() for creating DSM output
buffer. This creates an issue in arm/virt platform where DSDT
revision number is 2 and results in DSM buffer with a wrong
size(8 bytes) gets returned when actual length is < 8 bytes.
This causes guest kernel to report,
"nfit ACPI0012:00: found a zero length table '0' parsing nfit"
In order to fix this, aml code is now modified such that it builds
the DSM output buffer in a byte by byte fashion when length is
smaller than Integer size.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200421125934.14952-2-shameerali.kolothum.thodi@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Needed when moving aml builder code to devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200429140003.7336-3-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Coverity spots subj in following guest triggered code path
pci_write(, data = 0) -> acpi_pcihp_eject_slot(,slots = 0)
uinst32_t slot = ctz32(slots)
...
... = ~(1U << slot)
where 'slot' value is 32 in case 'slots' bitmap is empty.
'slots' is a bitmap and empty one shouldn't do anything
so return early doing nothing if resulted slot value is
not valid (i.e. not in 0-31 range)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200326135624.32464-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Several objects implemented their own uint property getters and setters,
despite them being straightforward (without any checks/validations on
the values themselves) and identical across objects. This makes use of
an enhanced API for object_property_add_uintXX_ptr() which offers
default setters.
Some of these setters used to update the value even if the type visit
failed (eg. because the value being set overflowed over the given type).
The new setter introduces a check for these errors, not updating the
value if an error occurred. The error is propagated.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Traditionally, the uint-specific property helpers only offer getters.
When adding object (or class) uint types, one must therefore use the
generic property helper if a setter is needed (and probably duplicate
some code writing their own getters/setters).
This enhances the uint-specific property helper APIs by adding a
bitwise-or'd 'flags' field and modifying all clients of that API to set
this paramater to OBJ_PROP_FLAG_READ. This maintains the current
behaviour whilst allowing others to also set OBJ_PROP_FLAG_WRITE (or use
the more convenient OBJ_PROP_FLAG_READWRITE) in the future (which will
automatically install a setter). Other flags may be added later.
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both ich9.c and piix4.c use methods/definitions declared in the
NVDIMM device header. Include it.
This fixes (when modifying unrelated headers):
hw/acpi/ich9.c:507:46: error: use of undeclared identifier 'TYPE_NVDIMM'
if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
^
hw/acpi/ich9.c:508:13: error: implicit declaration of function 'nvdimm_acpi_plug_cb' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
nvdimm_acpi_plug_cb(hotplug_dev, dev);
^
hw/acpi/piix4.c:403:46: error: use of undeclared identifier 'TYPE_NVDIMM'
if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) {
^
hw/acpi/piix4.c:404:13: error: implicit declaration of function 'nvdimm_acpi_plug_cb' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
nvdimm_acpi_plug_cb(hotplug_dev, dev);
^
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200228114649.12818-16-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
hw/acpi/cpu_hotplug.c calls pci_address_space_io(). Include
"hw/pci/pci.h" which declares it.
This fixes (when modifying unrelated headers):
hw/acpi/cpu_hotplug.c:103:28: error: implicit declaration of function 'pci_address_space_io' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
MemoryRegion *parent = pci_address_space_io(PCI_DEVICE(gpe_cpu->device));
^
Acked-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200228114649.12818-11-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The ICH9 chipset is not X86/PC specific.
These files don't use anything declared by the "hw/i386/pc.h"
or "hw/i386/ioapic.h" headers. Remove them.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200228114649.12818-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
nvdimm_device_list is required for parsing the list for devices
in subsequent patches. Move it to common utility area.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <158131055857.2897.15658377276504711773.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeK1CXAAoJEL/70l94x66DXtkIAI6W5wEY0Yme4M9Q5mGc0RV8
uscPLg0wsg88u6xne8ucCiGymvDREym2ii/aVI0Hi5ish84ZMdCrdck9cd+llpMf
+a3slL26AKlOW8WtYSuyAE1RdLFXngeXdwal5KtWPEExJorkDUPTbwhBzQduQK1a
myoHHcbwdd/96v7FvKnfG8jM6KZtHPQQ0i6+6fX4PN44jaULQNjze8GIrRBEwqw5
uCKJFQPBXiVcxKjH5/kzI1vl2hLJbF2ZGVEzX/U8OPZwyGPHIkWquURo8lvUTPfb
ySlNTUTV2CyrN65TBRXQp/mJi44WvME5Jxlf5rNLBaYXPpL0zhmILKn5X5ya4U0=
=TD0Y
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Register qdev properties as class properties (Marc-André)
* Cleanups (Philippe)
* virtio-scsi fix (Pan Nengyuan)
* Tweak Skylake-v3 model id (Kashyap)
* x86 UCODE_REV support and nested live migration fix (myself)
* Advisory mode for pvpanic (Zhenwei)
# gpg: Signature made Fri 24 Jan 2020 20:16:23 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (58 commits)
build-sys: clean up flags included in the linker command line
target/i386: Add the 'model-id' for Skylake -v3 CPU models
qdev: use object_property_help()
qapi/qmp: add ObjectPropertyInfo.default-value
qom: introduce object_property_help()
qom: simplify qmp_device_list_properties()
vl: print default value in object help
qdev: register properties as class properties
qdev: move instance properties to class properties
qdev: rename DeviceClass.props
qdev: set properties with device_class_set_props()
object: return self in object_ref()
object: release all props
object: add object_class_property_add_link()
object: express const link with link property
object: add direct link flag
object: rename link "child" to "target"
object: check strong flag with &
object: do not free class properties
object: add object_property_set_default
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is extra indent in ACPI GED hotplug cb that should be
deleted.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-id: 20200120012755.44581-2-zhukeqian1@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Firmware can enumerate present at boot APs by broadcasting wakeup IPI,
so that woken up secondary CPUs could register them-selves.
However in CPU hotplug case, it would need to know architecture
specific CPU IDs for possible and hotplugged CPUs so it could
prepare environment for and wake hotplugged AP.
Reuse and extend existing CPU hotplug interface to return architecture
specific ID for currently selected CPU in 2 registers:
- lower 32 bits in ACPI_CPU_CMD_DATA_OFFSET_RW
- upper 32 bits in ACPI_CPU_CMD_DATA2_OFFSET_R
On x86, firmware will use CPHP_GET_CPU_ID_CMD for fetching the APIC ID
when handling hotplug SMI.
Later, CPHP_GET_CPU_ID_CMD will be used on ARM to retrieve MPIDR,
which serves the similar to APIC ID purpose.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-10-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
No functional change in practice, patch only aims to properly
document (in spec and code) intended usage of the reserved space.
The new field is to be used for 2 purposes:
- detection of modern CPU hotplug interface using
CPHP_GET_NEXT_CPU_WITH_EVENT_CMD command.
procedure will be described in follow up patch:
"acpi: cpuhp: spec: add typical usecases"
- for returning upper 32 bits of architecture specific CPU ID,
for new CPHP_GET_CPU_ID_CMD command added by follow up patch:
"acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command"
Change is backward compatible with 4.2 and older machines, as field was
unconditionally reserved and always returned 0x0 if modern CPU hotplug
interface was enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1575896942-331151-8-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This structure describes memory side cache information for memory
proximity domains if the memory side cache is present and the
physical device forms the memory side cache.
The software could use this information to effectively place
the data in memory to maximize the performance of the system
memory that use the memory side cache.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-7-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This structure describes the memory access latency and bandwidth
information from various memory access initiator proximity domains.
The latency and bandwidth numbers represented in this structure
correspond to rated latency and bandwidth for the platform.
The software could use this information as hint for optimization.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-6-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table
(HMAT). The specification references below link:
http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
It describes the memory attributes, such as memory side cache
attributes and bandwidth and latency details, related to the
Memory Proximity Domain. The software is
expected to use this information as hint for optimization.
This structure describes Memory Proximity Domain Attributes by memory
subsystem and its associativity with processor proximity domain as well as
hint for memory usage.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report
the platform's HMAT tables.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-5-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
legacy_acpi_cpu_plug_cb() dereferences @errp when
acpi_set_cpu_present_bit() fails. That's wrong; see the big comment
in error.h. Introduced in commit cc43364de7 "acpi/cpu-hotplug:
introduce helper function to keep bit setting in one place".
No caller actually passes null, and acpi_set_cpu_present_bit() can't
actually fail.
Fix anyway: drop acpi_set_cpu_present_bit()'s @errp parameter.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20191204093625.14836-7-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The hw/pci-host/piix.c contains a mix of PIIX3 and i440FX chipsets
functions. To be able to split it, we need to export some
declarations first.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
