The 'qemu64' CPUID currently reports a family/model/stepping that
approximately corresponds to an AMD K7 vintage architecture.
The K7 series predates the introduction of 64-bit support by AMD
in the K8 series. This has been reported to lead to LLVM complaints
about generating 64-bit code for a 32-bit CPU target
LLVM ERROR: 64-bit code requested on a subtarget that doesn't support it!
It appears LLVM looks at the family/model/stepping, despite qemu64
reporting it is 64-bit capable.
This patch changes 'qemu64' to report a CPUID with the family, model
and stepping taken from a
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
which is one of the first 64-bit AMD CPUs.
Closes https://gitlab.com/qemu-project/qemu/-/issues/191
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210507133650.645526-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJgrwypAAoJEO8Ells5jWIRDfsIAJyrDUbgDoeg4dM9TEvE+3xr
5Fd52wVozlQhn6zz2ZfEcqVfWNVbVHsVcYnpJQMXOCda5CIl5qZbl2EzS/lBrdkm
f5XUD4lFhwH1pUUugT20lEFYct0dv2UddEmLrEctI+CB5d9bA+SqeDdLAHYbrDIR
jfc/vOrP/1sfvWCsXmZzJ+0UhoGoS8qU2eLx9nwSvan3uLMmLWfWSTUltvwMNvZD
oA6a1O9poV00W89W25tSeMOKKPaS+RZYVFvDd0HzQYRI0t496VxK/Jw0VqfF+iCl
3KBzjhUi7QyFWgQY5xFQcMWwob8McOJOUGX4EQERm8EbHy8VhpugCHinqLPqf38=
=fRpo
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 27 May 2021 04:06:17 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap-bsd: Remove special casing for older OpenBSD releases
virtio-net: failover: add missing remove_migration_state_change_notifier()
hw/net/imx_fec: return 0xffff when accessing non-existing PHY
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Per xHCI spec v1.2 chapter 4.17.5 page 296:
If MSI or MSI-X interrupts are enabled, Interrupt Pending (IP)
shall be cleared automatically when the PCI dword write generated
by the interrupt assertion is complete.
Currently QEMU does not clear the IP flag in the MSI / MSI-X mode.
This causes subsequent spurious interrupt to be delivered to guests.
To solve this, we change the xhci intr_raise() hook routine to have
a bool return value that is passed to its caller (the xhci core),
with true indicating that IP should be self-cleared.
Fixes: 62c6ae04cf ("xhci: Initial xHCI implementation")
Fixes: 4c47f80063 ("xhci: add msix support")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
[bmeng: move IP clear codes from xhci pci to xhci core]
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-2-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At present MSI / MSI-X interrupts are triggered regardless of the
irq level. We should have checked the level to determine whether
the interrupt needs to be delivered.
The level check logic was present in early versions of the xhci
model, but got dropped later by a rework of interrupt handling
under commit 4c4abe7cc9 ("xhci: rework interrupt handling").
Fixes: 4c4abe7cc9 ("xhci: rework interrupt handling")
Signed-off-by: Ruimei Yan <ruimei.yan@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20210521024224.2277634-1-bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for the following keys: KATAKANAHIRAGANA, HENKAN, MUHENKAN,
RO, and YEN. Before this commit, these keys did not work as expected
when a jp106 keyboard was connected to the guest as a usb-kbd device.
Signed-off-by: Katsuhiro Ueno <uenobk@gmail.com>
Message-Id: <CA+pCdY3iG+pKKQqEVknnWF-W0wK36S4U1jxPvxmGAPp6FFvz1Q@mail.gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a blob is available for the cursor, copy the data from the blob.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-15-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This API allows Qemu to set the blob allocated by the Guest as
the scanout buffer. If Opengl support is available, then the
scanout buffer would be submitted as a dmabuf to the UI; if not,
a pixman image is created from the scanout buffer and is
submitted to the UI via the display surface.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-14-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Creating a small helper function for updating the scanout
will be useful in the next patch where this needs to be
done early in do_set_scanout before returning.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-13-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These helpers can be useful for creating dmabuf objects from blobs
and submitting them to the UI.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-12-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This API allows Qemu to register the blob allocated by the Guest
as a new resource and map its backing storage.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-10-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add the property bit, configuration flag and other relevant
macros and definitions associated with this feature.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-9-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of passing the attach_backing object to extract nr_entries
and offset, explicitly pass these as arguments to this function.
This will be helpful when adding create_blob API.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-8-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Store the meta-data associated with a FB in a new object
(struct virtio_gpu_framebuffer) and pass the object to set_scanout.
Also move code in set_scanout into a do_set_scanout function.
This will be helpful when adding set_scanout_blob API.
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-7-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add helper functions to create a dmabuf for a resource and mmap it.
Also, introduce the fields blob and blob_size so that these helpers
can start to use them but the full picture will emerge only after
adding create_blob API in patch 8 of this series.
To be able to create a dmabuf using the udmabuf driver, Qemu needs
to be lauched with the memfd memory backend like this:
qemu-system-x86_64 -m 8192m -object memory-backend-memfd,id=mem1,size=8192M
-machine memory-backend=mem1
Based-on-patch-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Message-Id: <20210526231429.1045476-4-vivek.kasireddy@intel.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
On some MIPS system, page size is 16K, and qxl vga device can
be used for VM in kvm mode. Qxl pci rom size is set 8K fixed,
smaller than 16K page size on host system, it fails to be
added into memslots in kvm mode where memory_size and GPA
are required to align with page size.
This patch fixes this issue.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <1621340448-31617-1-git-send-email-maobibo@loongson.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In the failover case configuration, virtio_net_device_realize() uses an
add_migration_state_change_notifier() to add a state notifier, but this
notifier is not removed by the unrealize function when the virtio-net
card is unplugged.
If the card is unplugged and a migration is started, the notifier is
called and as it is not valid anymore QEMU crashes.
This patch fixes the problem by adding the
remove_migration_state_change_notifier() in virtio_net_device_unrealize().
The problem can be reproduced with:
$ qemu-system-x86_64 -enable-kvm -m 1g -M q35 \
-device pcie-root-port,slot=4,id=root1 \
-device pcie-root-port,slot=5,id=root2 \
-device virtio-net-pci,id=net1,mac=52:54:00:6f:55:cc,failover=on,bus=root1 \
-monitor stdio disk.qcow2
(qemu) device_del net1
(qemu) migrate "exec:gzip -c > STATEFILE.gz"
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000000000000000 in ?? ()
(gdb) bt
#0 0x0000000000000000 in ()
#1 0x0000555555d726d7 in notifier_list_notify (...)
at .../util/notify.c:39
#2 0x0000555555842c1a in migrate_fd_connect (...)
at .../migration/migration.c:3975
#3 0x0000555555950f7d in migration_channel_connect (...)
error@entry=0x0) at .../migration/channel.c:107
#4 0x0000555555910922 in exec_start_outgoing_migration (...)
at .../migration/exec.c:42
Reported-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If a PHY does not exist, attempts to read from it should return 0xffff.
Otherwise the Linux kernel will believe that a PHY is there and select
the non-existing PHY. This in turn will result in network errors later
on since the real PHY is not selected or configured.
Since reading from or writing to a non-existing PHY is not an emulation
error, replace guest error messages with traces.
Fixes: 461c51ad42 ("Add a phy-num property to the i.MX FEC emulator")
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add a flag to MIPSCPUClass in order to avoid needing to
replace mips_tcg_ops.do_transaction_failed.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-23-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-22-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-20-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The write_elf*() handlers are used to dump vmcore images.
This feature is only meaningful for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_get_crash_info() is called on GUEST_PANICKED events,
which only occur in system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-18-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
VirtIO devices are only meaningful with system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-17-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No code uses CPUClass::get_memory_mapping() outside of hw/core/cpu.c:
$ git grep -F -- '->get_memory_mapping'
hw/core/cpu.c:87: cc->get_memory_mapping(cpu, list, errp);
hw/core/cpu.c:439: k->get_memory_mapping = cpu_common_get_memory_mapping;
target/i386/cpu.c:7422: cc->get_memory_mapping = x86_cpu_get_memory_mapping;
Check the handler presence in place and remove the common fallback code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-11-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No code uses CPUClass::get_paging_enabled() outside of hw/core/cpu.c:
$ git grep -F -- '->get_paging_enabled'
hw/core/cpu.c:74: return cc->get_paging_enabled(cpu);
hw/core/cpu.c:438: k->get_paging_enabled = cpu_common_get_paging_enabled;
target/i386/cpu.c:7418: cc->get_paging_enabled = x86_cpu_get_paging_enabled;
Check the handler presence in place and remove the common fallback code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-10-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce the cpu_virtio_is_big_endian() generic helper to avoid
calling CPUClass internal virtio_is_big_endian() one.
Similarly to commit bf7663c4bd ("cpu: introduce
CPUClass::virtio_is_big_endian()"), we keep 'virtio' in the method
name to hint this handler shouldn't be called anywhere but from the
virtio code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-8-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To be able to later extract the cpu_get_phys_page_debug() and
cpu_asidx_from_attrs() handlers from CPUClass, un-inline them
from "hw/core/cpu.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-7-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current cpu.c contains sysemu-specific methods.
To avoid building them in user-mode builds, split the
current cpu.c as cpu-common.c / cpu-sysemu.c.
Start by moving cpu_get_crash_info().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-6-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* tiny step towards a usable preconfig mode (myself)
* Kconfig and LOCK_GUARD cleanups (philippe)
* new x86 CPUID feature (Yang Zhong)
* "-object qtest" support (myself)
* Dirty ring support for KVM (Peter)
* Fixes for 6.0 command line parsing breakage (myself)
* Fix for macOS 11.3 SDK (Katsuhiro)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCuRAQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOL6Qf/bUjQNAUc2QQJya1lu8TEf1o4vjkK
C3EzFPVAj+m2O3OZOGEHcTh8+lDSzBeE2gB3bt4AD+KvFbQGXhLM3gMu/Ztymv8m
3rVEe/NxNyq/CgC307GIwF3in7rEzjH0+WHaOuoU340e3Po1FA7s20VnMysVxxng
4Pf4m4Y0k0eq022HgqZ/r/kbnINxDHagmzuyiFARkt8ooiuj4NyOMW7UKMk3fBvY
MLMPsBe3imWmVnkOF0n/qJ+Svbtx15iLgGIIggshy3rmPereUpIQYaJ9FS6jcXO2
YHuYDc2aGelMU84r+x+9UQra6auzJfc4UbylOsGjopCeFG2aU8rLMphvpw==
=UQwU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* submodule cleanups (Philippe, myself)
* tiny step towards a usable preconfig mode (myself)
* Kconfig and LOCK_GUARD cleanups (philippe)
* new x86 CPUID feature (Yang Zhong)
* "-object qtest" support (myself)
* Dirty ring support for KVM (Peter)
* Fixes for 6.0 command line parsing breakage (myself)
* Fix for macOS 11.3 SDK (Katsuhiro)
# gpg: Signature made Wed 26 May 2021 13:50:12 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream: (28 commits)
gitlab-ci: use --meson=git for CFI jobs
hw/scsi: Fix sector translation bug in scsi_unmap_complete_noio
configure: Avoid error messages about missing *-config-*.h files
doc: Add notes about -mon option mode=control argument.
qemu-config: load modules when instantiating option groups
vl: allow not specifying size in -m when using -M memory-backend
replication: move include out of root directory
remove qemu-options* from root directory
meson: Set implicit_include_directories to false
tests/qtest/fuzz: Fix build failure
KVM: Dirty ring support
KVM: Disable manual dirty log when dirty ring enabled
KVM: Add dirty-ring-size property
KVM: Cache kvm slot dirty bitmap size
KVM: Simplify dirty log sync in kvm_set_phys_mem
KVM: Provide helper to sync dirty bitmap from slot to ramblock
KVM: Provide helper to get kvm dirty log
KVM: Create the KVMSlot dirty bitmap on flag changes
KVM: Use a big lock to replace per-kml slots_lock
memory: Introduce log_sync_global() to memory listener
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
check_lba_range expects sectors to be expressed in original qdev blocksize, but
scsi_unmap_complete_noio was translating them to 512 block sizes, which was
causing sense errors in the larger LBAs in devices using a 4k block size.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/345
Signed-off-by: Kit Westneat <kit.westneat@gmail.com>
Message-Id: <20210521142829.326217-1-kit.westneat@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per the kconfig.rst:
A device should be listed [...] ``imply`` if (depending on
the QEMU command line) the board may or may not be started
without it.
This is the case with the NVDIMM device, so use the 'imply'
weak reverse dependency to select the symbol.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511155354.3069141-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The variable outport_present is a flag to show if the outport
subsection was loaded. Clear the outport_present flag in the
outer pre_load() function. This method is recommended in the QEMU
manual for developers in the chapter "Migration, Subsections".
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-12-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In 2005 the author of commit daa579632d "PS2 mouse and keyboard
separation (Paul Brook)" and 0e43e99c04 "PS2 mouse and keyboard
separation (Paul Brook)" separated the PS/2 controller code and
the PS/2 keyboard and mouse code. It seems he forgot to remove
a few defines. Remove them now.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-11-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the PS/2 controller command KBD_CCMD_MOUSE_DISABLE
doesn't disable the PS/2 mouse communication at all, and the
PS/2 controller commands KBD_CCMD_KBD_DISABLE and
KBD_CCMD_KBD_ENABLE only disable and enable the keyboard
interrupt, which is very different from what a real PS/2
controller does. A guest may notice the difference.
Mask out pending data on disabled queues to correctly disable
the PS/2 controller communication.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace reads of the variable s->pending with a call to a new
function kbd_pending() to ease the review of the next patch.
There is no functional change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a separate queue for PS/2 controller responses. The
responses no longer get queued in the keyboard or mouse queues.
The advantage of this can be seen after the next two patches,
where the guest can disable the PS/2 communication with keyboard
and mouse and still talk to the PS/2 controller.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is only one flag to distinguish between two
interrupt sources and there are no available flags for more
sources. Add an internal state variable to store the interrupt
source. The next patch will introduce an additional interrupt
source. There is no functional change.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Limit the keyboard data rate to the serial link speed. Some old
DOS software relies on being able to read an incoming scan-code
more than once. After reading keyboard data from the i8042
controller, the guest software has 1ms to read the same data
again.
Use -global i8042.kbd-throttle=on to enable this feature.
To see how this patch works, start a FreeDOS 1.2 guest with the
qemu option -global i8042.kbd-throttle=on and open a text file
with the vim 7.3 32 bit for DOS executable. Then use the cursor
keys (not the cursor keys on the numeric keypad) to move through
the text. Without the kbd-throttle option enabled each keystroke
will move the cursor two positions.
Buglink: https://bugs.launchpad.net/bugs/1895363
Buglink: https://bugs.launchpad.net/bugs/1897568
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split out the interrupt line changing code from kbd_update_irq().
This is a preparation for the next patch. There is no functional
change.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't deassert the irq twice if the queue is empty. While the
second deassertion doesn't do any harm, it's unnecessary.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210525181441.27768-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
