This function is not used anywhere, so remove it.
Markus Armbruster adds:
The i82078 floppy device model used to call bdrv_media_changed() to
implement its media change bit when backed by a host floppy. This
went away in 21fcf36 "fdc: simplify media change handling".
Probably broke host floppy media change. Host floppy pass-through
was dropped in commit f709623. bdrv_media_changed() has never been
used for anything else. Remove it.
(Source is Message-ID: <87y3ruaypm.fsf@dusky.pond.sub.org>)
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The following functions fail if bs->drv is a filter and does not
implement them:
bdrv_probe_blocksizes
bdrv_probe_geometry
bdrv_truncate
bdrv_has_zero_init
bdrv_get_info
Instead, the call should be passed to bs->file if it exists, to allow
filter drivers to support those methods without implementing them. This
commit makes `drv->is_filter = true` imply that these callbacks will be
forwarded to bs->file by default, so disabling support for these
functions must be done explicitly.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, a FOO_lookup is an array of strings terminated by a NULL
sentinel.
A future patch will generate enums with "holes". NULL-termination
will cease to work then.
To prepare for that, store the length in the FOO_lookup by wrapping it
in a struct and adding a member for the length.
The sentinel will be dropped next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170822132255.23945-13-marcandre.lureau@redhat.com>
[Basically redone]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-16-git-send-email-armbru@redhat.com>
[Rebased]
The next commit will put it to use. May look pointless now, but we're
going to change the FOO_lookup's type, and then it'll help.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-13-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The lookup tables have a sentinel, no need to make callers pass their
size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1503564371-26090-3-git-send-email-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Rebased, commit message corrected]
In the ->inactivate() callbacks, permissions are updated, which
typically involves a recursive check of the whole graph. Setting
BDRV_O_INACTIVE right before doing that creates a state that
bdrv_is_writable() returns false, which causes permission update
failure.
Reorder them so the flag is updated after calling the function. Note
that this doesn't break the assert in bdrv_child_cb_inactivate() because
for any specific BDS, we still update its flags first before calling
->inactivate() on it one level deeper in the recursion.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <20170823134242.12080-5-famz@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Reopening an image should be consistent with opening it, so we should
set BDRV_O_ALLOW_RDWR for any image that is reopened read-write like in
bdrv_open_inherit().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
BDRV_O_ALLOW_RDWR is a flag that tells whether qemu can internally
reopen a node read-write temporarily because the user requested
read-write for the top-level image, but qemu decided that read-only is
enough for this node (a backing file).
bdrv_reopen() is different, it is also used for cases where the user
changed their mind and wants to update the options. There is no reason
to forbid making a node read-write in that case.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Commit 8ee03995 refactored the code incorrectly and broke the release of
permissions on the old BDS. Instead of changing the permissions to the
new required values after removing the old BDS from the list of
children, it only re-obtains the permissions it already had.
Change the order of operations so that the old BDS is removed again
before calculating the new required permissions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
bdrv_open_driver() is called in two places, bdrv_new_open_driver() and
bdrv_open_common(). In the latter, failure cleanup in is in its caller,
bdrv_open_inherit(), which unrefs the bs->file of the failed driver open
if it exists.
Let's move the bs->file cleanup to bdrv_open_driver() to take care of
all callers and do not set bs->drv to NULL unless the driver's open
function failed. When bs is destroyed by removing its last reference, it
calls bdrv_close() which checks bs->drv to perform the needed cleanups
and also call the driver's close function. Since it cleans up options
and opaque we must take care not leave dangling pointers.
The error paths in bdrv_open_driver() are now two:
If open fails, drv->bdrv_close() should not be called. Unref the child
if it exists, free what we allocated and set bs->drv to NULL. Return the
error and let callers free their stuff.
If open succeeds but we fail after, return the error and let callers
unref and delete their bs, while cleaning up their allocations.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In some error paths it is possible to QDECREF a freed dangling
explicit_options, resulting in a heap overflow crash. For example
bdrv_open_inherit()'s fail unrefs it, then calls bdrv_unref which calls
bdrv_close which also unrefs it.
Signed-off-by: Manos Pitsidianakis <el13635@mail.ntua.gr>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commits 0db832f and 6cdbceb introduced the automatic insertion of filter
nodes above the top layer of mirror and commit block jobs. The
assumption made there was that since libvirt doesn't do node-level
management of the block layer yet, it shouldn't be affected by added
nodes.
This is true as far as commands issued by libvirt are concerned. It only
uses BlockBackend names to address nodes, so any operations it performs
still operate on the root of the tree as intended.
However, the assumption breaks down when you consider query commands,
which return data for the wrong node now. These commands also return
information on some child nodes (bs->file and/or bs->backing), which
libvirt does make use of, and which refer to the wrong nodes, too.
One of the consequences is that oVirt gets wrong information about the
image size and stops the VM in response as long as a mirror or commit
job is running:
https://bugzilla.redhat.com/show_bug.cgi?id=1470634
This patch fixes the problem by hiding the implicit nodes created
automatically by the mirror and commit block jobs in the output of
query-block and BlockBackend-based query-blockstats as long as the user
doesn't indicate that they are aware of those nodes by providing a node
name for them in the QMP command to start the block job.
The node-based commands query-named-block-nodes and query-blockstats
with query-nodes=true still show all nodes, including implicit ones.
This ensures that users that are capable of node-level management can
still access the full information; users that only know BlockBackends
won't use these commands.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Or, rather, force the open of a backing image if one was specified
for creation. Using a similar -unsafe option as rebase, allow qemu-img
to ignore the backing file validation if possible.
It may not always be possible, as in the existing case when a filesize
for the new image was not specified.
This is accomplished by shifting around the conditionals in
bdrv_img_create, such that a backing file is always opened unless we
provide BDRV_O_NO_BACKING. qemu-img is adjusted to pass this new flag
when -u is provided to create.
Sorry for the heinous looking diffstat, but it's mostly whitespace.
Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1213786
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Assigning directly to *errp is not valid, as errp may be NULL,
&error_fatal, or &error_abort. Use error_propagate() instead.
With this, there's no need to check if errp is NULL anymore, as
error_propagate() and error_prepend() are able to handle that.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170608133906.12737-3-ehabkost@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
For block drivers that just pass a truncate request to the underlying
protocol, we can now pass the preallocation mode instead of aborting if
it is not PREALLOC_MODE_OFF.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a PreallocMode parameter to the bdrv_truncate() function implemented
by each block driver. Currently, we always pass PREALLOC_MODE_OFF and no
driver accepts anything else.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20170613202107.10125-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_measure() provides a conservative maximum for the size of a new
image. This information is handy if storage needs to be allocated (e.g.
a SAN or an LVM volume) ahead of time.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20170705125738.8777-2-stefanha@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We should release them here to reload on invalidate cache.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-31-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will be needed to check some restrictions before making bitmap
persistent in qmp-block-dirty-bitmap-add (this functionality will be
added by future patch)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-22-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Release bitmaps after 'if (bs->drv) { ... }' block. This will allow
format driver to save persistent bitmaps, which will appear in following
commits.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-17-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add format driver handler, which should mark loaded read-only
bitmaps as 'IN_USE' in the image and unset read_only field in
corresponding BdrvDirtyBitmap's.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170628120530.31251-14-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add bs local variable to simplify code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20170628120530.31251-13-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
mirror_complete opens the backing chain, which should have the same
AioContext as the top when using iothreads. Make the code guarantee
this, which fixes a failed assertion in bdrv_attach_child.
Signed-off-by: sochin.jiang <sochin.jiang@huawei.com>
Message-id: 1498475064-39816-1-git-send-email-sochin.jiang@huawei.com
[mreitz: Reworded commit message]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all encryption keys must be provided upfront via
the QCryptoSecret API and associated block driver properties
there is no need for any explicit encryption handling APIs
in the block layer. Encryption can be handled transparently
within the block driver. We only retain an API for querying
whether an image is encrypted or not, since that is a
potentially useful piece of metadata to report to the user.
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170623162419.26068-18-berrange@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It protects only the list of dirty bitmaps; in the next patch we will
also protect their content.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20170605123908.18777-15-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The file drivers' *_parse_filename() implementations just strip the
optional protocol prefix off the filename. However, for e.g.
"file:foo:bar", this would lead to "foo:bar" being stored as the BDS's
filename which looks like it should be managed using the "foo" protocol.
This is especially troublesome if you then try to resolve a backing
filename based on "foo:bar".
This issue can only occur if the stripped part is a relative filename
("file:/foo:bar" will be shortened to "/foo:bar" and having a slash
before the first colon means that "/foo" is not recognized as a protocol
part). Therefore, we can easily fix it by prepending "./" to such
filenames.
Before this patch:
$ ./qemu-img create -f qcow2 backing.qcow2 64M
Formatting 'backing.qcow2', fmt=qcow2 size=67108864 encryption=off
cluster_size=65536 lazy_refcounts=off refcount_bits=16
$ ./qemu-img create -f qcow2 -b backing.qcow2 file🔝image.qcow2
Formatting 'file🔝image.qcow2', fmt=qcow2 size=67108864
backing_file=backing.qcow2 encryption=off cluster_size=65536
lazy_refcounts=off refcount_bits=16
$ ./qemu-io file🔝image.qcow2
can't open device file🔝image.qcow2: Could not open backing file:
Unknown protocol 'top'
After this patch:
$ ./qemu-io file🔝image.qcow2
[no error]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170522195217.12991-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
path_combine() naturally tries to preserve a protocol prefix. However,
it recognizes such a prefix by scanning for the first colon; which is
different from what path_has_protocol() does: There only is a protocol
prefix if there is a colon before the first slash.
A protocol prefix that is not recognized by path_has_protocol() is none,
and should thus not be taken as one.
Case in point, before this patch:
$ ./qemu-img create -f qcow2 -b backing.qcow2 ./top:image.qcow2
qemu-img: ./top:image.qcow2: Could not open './top:backing.qcow2':
No such file or directory
Afterwards:
$ ./qemu-img create -f qcow2 -b backing.qcow2 ./top:image.qcow2
qemu-img: ./top:image.qcow2: Could not open './backing.qcow2':
No such file or directory
Reported-by: yangyang <yangyang@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170522195217.12991-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Format drivers for inactive nodes don't need write/resize permissions on
their bs->file and can share write/resize with another VM (in fact, this
is the whole point of keeping images inactive). Represent this fact in
the op blocker system, so that image locking does the right thing
without special-casing inactive images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The proper order for inactivating block nodes is that first the parents
get inactivated and then the children. If we do things in this order, we
can assert that we didn't accidentally leave a parent activated when one
of its child nodes is inactive.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With image locking, permissions affect other qemu processes as well. We
want to be sure that the destination can run, so let's drop permissions
on the source when migration completes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of manually calling blk_resume_after_migration() in migration
code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend
activation with cache invalidation into a single function. This is
achieved with a new callback in BdrvChildRole that is called by
bdrv_invalidate_cache_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It can be used outside of block.c for making user friendly messages.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Noticed while checking Coccinelle results. Naming a label 'out:'
when it is only used on error paths is weird. Also, we had some
dead stores to 'ret'. Meanwhile we know that snapshot_options
is NULL on success and that QDECREF(NULL) is safe. So merge the
two exit paths into one by careful control over bs_snapshot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-8-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then I verified that no manual touchups were required.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
As long as BDRV_O_INACTIVE is set, the image file is only opened so we
have a file descriptor for it. We're definitely not supposed to modify
the image, it's still owned by the migration source.
This commit is an addition to 09e0c771 but the assert() is added to
bdrv_truncate().
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
Message-id: 1491405505-31620-3-git-send-email-den@openvz.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add missing error messages for the block driver implementations of
.bdrv_truncate(); drop the generic one from block.c's bdrv_truncate().
Since one of these changes touches a mis-indented block in
block/file-posix.c, this patch fixes that coding style issue along the
way.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-5-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error parameter to the block drivers' bdrv_truncate() interface.
If a block driver does not set this in case of an error, the generic
bdrv_truncate() implementation will do so.
Where it is obvious, this patch also makes some block drivers set this
value.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-4-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
For one thing, this allows us to drop the error message generation from
qemu-img.c and blockdev.c and instead have it unified in
bdrv_truncate().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170328205129.15138-3-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reproducer:
$ ./qemu-img info ''
qemu-img: ./block.c:1008: bdrv_open_driver: Assertion
`!drv->bdrv_needs_filename || bs->filename[0]' failed.
[1] 26105 abort (core dumped) ./qemu-img info ''
This patch fixes this to be:
$ ./qemu-img info ''
qemu-img: Could not open '': The 'file' block driver requires a file
name
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit e3e0003a8f.
This commit was necessary for the 2.9 release because we were unable to
fix the underlying issue(s) in time. However, we will be for 2.10.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce check function for setting read_only flags. Will return < 0 on
error, with appropriate Error value set. Does not alter any flags.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: e2bba34ac3bc76a0c42adc390413f358ae0566e8.1491597120.git.jcody@redhat.com
The BDRV_O_ALLOW_RDWR flag allows / prohibits the changing of
the BDS 'read_only' state, but there are a few places where it
is ignored. In the bdrv_set_read_only() helper, make sure to
honor the flag.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: be2e5fb2d285cbece2b6d06bed54a6f56520d251.1491597120.git.jcody@redhat.com
A few block drivers will set the BDS read_only flag from their
.bdrv_open() function. This means the bs->read_only flag could
be set after we enable copy_on_read, as the BDRV_O_COPY_ON_READ
flag check occurs prior to the call to bdrv->bdrv_open().
This adds an error return to bdrv_set_read_only(), and an error will be
return if we try to set the BDS to read_only while copy_on_read is
enabled.
This patch also changes the behavior of vvfat. Before, vvfat could
override the drive 'readonly' flag with its own, internal 'rw' flag.
For instance, this -drive parameter would result in a writable image:
"-drive format=vvfat,dir=/tmp/vvfat,rw,if=virtio,readonly=on"
This is not correct. Now, attempting to use the above -drive parameter
will result in an error (i.e., 'rw' is incompatible with 'readonly=on').
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 0c5b4c1cc2c651471b131f21376dfd5ea24d2196.1491597120.git.jcody@redhat.com
We have a helper wrapper for checking for the BDS read_only flag,
add a helper wrapper to set the read_only flag as well.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b18972d05f5fa2ac16c014f0af98d680553048d.1491597120.git.jcody@redhat.com
In case of block migration, there may be writes to BlockBackends that do
not have the write permission taken. Before this issue is fixed (which
is not going to happen in 2.9), we therefore cannot assert that this is
the case.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20170411145050.31290-1-mreitz@redhat.com
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The fact that the bs->aio_context is changing can confuse the dataplane
iothread, because of the now fine granularity aio context lock.
bdrv_drain should rather be a bdrv_drained_begin/end pair, but since
bs->aio_context is changing, we can just use aio_disable_external and
bdrv_parent_drained_begin.
Reported-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
While it is true that bdrv_set_aio_context only works on a single
BlockDriverState subtree (see commit message for 53ec73e, "block: Use
bdrv_drain to replace uncessary bdrv_drain_all", 2015-07-07), it works
at the AioContext level rather than the BlockDriverState level.
Therefore, it is also necessary to trigger pending bottom halves too,
even if no requests are pending.
For NBD this ensures that the aio_co_schedule of a previous call to
nbd_attach_aio_context is completed before detaching from the old
AioContext; it fixes qemu-iotest 094. Another similar bug happens
when the VM is stopped and the virtio-blk dataplane irqfd is torn down.
In this case it's possible that guest I/O gets stuck if notify_guest_bh
was scheduled but doesn't run.
Calling aio_poll from another AioContext is safe if non-blocking; races
such as the one mentioned in the commit message for c9d1a56 ("block:
only call aio_poll on the current thread's AioContext", 2016-10-28)
are a concern for blocking calls.
I considered other options, including:
- moving the bs->wakeup mechanism to AioContext, and letting the caller
check. This might work for virtio which has a clear place to wakeup
(notify_place_bh) and check the condition (virtio_blk_data_plane_stop).
For aio_co_schedule I couldn't find a clear place to check the condition.
- adding a dummy oneshot bottom half and waiting for it to trigger.
This has the complication that bottom half list is LIFO for historical
reasons. There were performance issues caused by bottom half ordering
in the past, so I decided against it for 2.9.
Fixes: 9972354856
Reported-by: Max Reitz <mreitz@redhat.com>
Reported-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Tested-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20170314111157.14464-2-pbonzini@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_child_set_perm alone is not very usable because the caller must
call bdrv_child_check_perm first. This is already encapsulated
conveniently in bdrv_child_try_set_perm, so remove the other prototypes
from the header and fix the one wrong caller, block/mirror.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In bdrv_open_inherit(), the filename is refreshed after opening the
backing file, but we neglected to do the same when the backing file
changes later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
All callers pass false now, so the parameter can go away again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-14-git-send-email-armbru@redhat.com>
The next few commits will put the errors to use where appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-13-git-send-email-armbru@redhat.com>
When adding an Error parameter, bdrv_replace_in_backing_chain() would
become nothing more than a wrapper around change_parent_backing_link().
So make the latter public, renamed as bdrv_replace_node(), and remove
bdrv_replace_in_backing_chain().
Most of the callers just remove a node from the graph that they just
inserted, so they can use &error_abort, but completion of a mirror job
with 'replaces' set can actually fail.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of just trying to change parents by parent over to reference @to
instead of @from, and abort()ing whenever the permissions don't allow
this, do proper permission checking beforehand and pass any error to the
callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
change_parent_backing_link() will need to update multiple BdrvChild
objects at once. Checking permissions reference by reference doesn't
work because permissions need to be consistent only with all parents
moved to the new child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Aborting on error in bdrv_append() isn't correct. This patch fixes it
and lets the callers handle failures.
Test case 085 needs a reference output update. This is caused by the
reversed order of bdrv_set_backing_hd() and change_parent_backing_link()
in bdrv_append(): When the backing file of the new node is set, the
parent nodes are still pointing to the old top, so the backing blocker
is now initialised with the node name rather than the BlockBackend name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Not all callers of bdrv_set_backing_hd() know for sure that attaching
the backing file will be allowed by the permission system. Return the
error from the function rather than aborting.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This adds an assertion that ensures that the necessary resize permission
has been granted before bdrv_truncate() is called.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Now that the backing file child role implements .attach/.detach
callbacks, nothing prevents us from modifying the graph even if that
involves changing backing file links.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Backing files are somewhat special compared to other kinds of children
because they are attached and detached using bdrv_set_backing_hd()
rather than the normal set of functions, which does a few more things
like setting backing blockers, toggling the BDRV_O_NO_BACKING flag,
setting parent_bs->backing_file, etc.
These special features are a reason why change_parent_backing_link()
can't handle backing files yet. With abstracting the additional features
into .attach/.detach callbacks, we get a step closer to a function that
can actually deal with this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
bdrv_append() cares about isolation of the node that it modifies, but
not about activity in some subtree below it. Instead of using the
recursive bdrv_requests_pending(), directly check bs->in_flight, which
considers only the node in question.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
When the parents' child links are updated in bdrv_append() or
bdrv_replace_in_backing_chain(), this should affect all child links of
BlockBackends or other nodes, but not on child links held for other
purposes (like for setting permissions). This patch allows to control
the behaviour per BdrvChildRole.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Instead of just telling that there was some conflict, we can be specific
and tell which permissions were in conflict and which way the conflict
is.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
For meaningful error messages in the permission system, we need to get
some human-readable description of the parent of a BdrvChild.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Now that blk_insert_bs() requests the BlockBackend permissions for the
node it attaches to, it can fail. Instead of aborting, pass the errors
to the callers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
We want every user to be specific about the permissions it needs, so
we'll pass the initial permissions as parameters to blk_new(). A user
only needs to call blk_set_perm() if it wants to change the permissions
after the fact.
The permissions are stored in the BlockBackend and applied whenever a
BlockDriverState should be attached in blk_insert_bs().
This does not include actually choosing the right set of permissions
everywhere yet. Instead, the usual FIXME comment is added to each place
and will be addressed in individual patches.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Now that all block drivers with children tell us what permissions they
need from each of their children, bdrv_attach_child() can use this
information and make the right requirements while trying to attach new
children.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
All block drivers that can have child nodes implement .bdrv_child_perm()
now. Make this officially a requirement by asserting that only drivers
without children can omit .bdrv_child_perm().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
vvfat is the last remaining driver that can have children, but doesn't
implement .bdrv_child_perm() yet. The default handlers aren't suitable
here, so let's implement a very simple driver-specific one that protects
the internal child from being used by other users as good as our
permissions permit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Almost all format drivers have the same characteristics as far as
permissions are concerned: They have one or more children for storing
their own data and, more importantly, metadata (can be written to and
grow even without external write requests, must be protected against
other writers and present consistent data) and optionally a backing file
(this is just data, so like for a filter, it only depends on what the
parent nodes need).
This provides a default implementation that can be shared by most of
our format drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Most filters need permissions related to read and write for their
children, but only if the node has a parent that wants to use the same
operation on the filter. The same is true for resize.
This adds a default implementation that simply forwards all necessary
permissions to all children of the node and leaves the other permissions
unchanged.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
In many cases, the required permissions of one node on its children
depend on what its parents require from it. For example, the raw format
or most filter drivers only need to request consistent reads if that's
something that one of their parents wants.
In order to achieve this, this patch introduces two new BlockDriver
callbacks. The first one lets drivers first check (recursively) whether
the requested permissions can be set; the second one actually sets the
new permission bitmask.
Also add helper functions that drivers can use in their implementation
of the callbacks to update their permissions on a specific child.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When attaching a node as a child to a new parent, the required and
shared permissions for this parent are checked against all other parents
of the node now, and an error is returned if there is a conflict.
This allows error returns to a function that previously always
succeeded, and the same is true for quite a few callers and their
callers. Converting all of them within the same patch would be too much,
so for now everyone tells that they don't need any permissions and allow
everyone else to do anything. This way we can use &error_abort initially
and convert caller by caller to pass actual permission requirements and
implement error handling.
All these places are marked with FIXME comments and it will be the job
of the next patches to clean them up again.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
It will have to return an error soon, so prepare the callers for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=OYgF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 24 Feb 2017 18:08:26 GMT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
tests: Use opened block node for block job tests
vvfat: Use opened node as backing file
block: Add bdrv_new_open_driver()
block: Factor out bdrv_open_driver()
block: Use BlockBackend for image probing
block: Factor out bdrv_open_child_bs()
block: Attach bs->file only during .bdrv_open()
block: Pass BdrvChild to bdrv_truncate()
mirror: Resize active commit base in mirror_run()
qcow2: Use BB for resizing in qcow2_amend_options()
blockdev: Use BlockBackend to resize in qmp_block_resize()
iotests: Fix another race in 030
qemu-img: Improve documentation for PREALLOC_MODE_FALLOC
qemu-img: Truncate before full preallocation
qemu-img: Add tests for raw image preallocation
qemu-img: Do not truncate before preallocation
qemu-iotests: redirect nbd server stdout to /dev/null
qemu-iotests: add ability to exclude certain protocols from tests
qemu-iotests: Test 137 only supports 'file' protocol
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This function allows to create more or less normal BlockDriverStates
even for BlockDrivers that aren't globally registered (e.g. helper
filters for block jobs).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is a function that doesn't do any option parsing, but just does
some basic BlockDriverState setup and calls the .bdrv_open() function of
the block driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This fixes the use of a parent-less BdrvChild in bdrv_open_inherit() by
converting it into a BlockBackend. Which is exactly what it should be,
image probing is an external, standalone user of a node. The requests
can't be considered to originate from the format driver node because
that one isn't even opened yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This is the part of bdrv_open_child() that opens a BDS with option
inheritance, but doesn't attach it as a child to the parent yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The way that attaching bs->file worked was a bit unusual in that it was
the only child that would be attached to a node which is not opened yet.
Because of this, the block layer couldn't know yet which permissions the
driver would eventually need.
This patch moves the point where bs->file is attached to the beginning
of the individual .bdrv_open() implementations, so drivers already know
what they are going to do with the child. This is also more consistent
with how driver-specific children work.
For a moment, bdrv_open() gets its own BdrvChild to perform image
probing, but instead of directly assigning this BdrvChild to the BDS, it
becomes a temporary one and the node name is passed as an option to the
drivers, so that they can simply use bdrv_open_child() to create another
reference for their own use.
This duplicated child for (the not opened yet) bs is not the final
state, a follow-up patch will change the image probing code to use a
BlockBackend, which is completely independent of bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
qobject_to_qdict(obj) returns NULL when obj isn't a QDict. Check
that instead of qobject_type(obj) == QTYPE_QDICT.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487363905-9480-8-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Current implementation invalidates firstly parent bds and then its
children. This leads to the following bug:
after incoming migration, in bdrv_invalidate_cache_all:
1. invalidate parent bds - reopen it with BDRV_O_INACTIVE cleared
2. child is not yet invalidated
3. parent check that its BDRV_O_INACTIVE is cleared
4. parent writes to child
5. assert in bdrv_co_pwritev, as BDRV_O_INACTIVE is set for child
This patch fixes it by just changing invalidate sequence: invalidate
children first.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20170131112308.54189-1-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
