Extract the block accounting statistics into a structure so the block device
models can hold them in the future.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Management software, such as RHEV's vdsm, want to be able to allocate
disk space on demand. The basic use case is to start a VM with a small
disk and then the disk is enlarged when QEMU hits a ENOSPC condition.
To this end, the management software has to be notified when QEMU
encounters ENOSPC. The solution implemented by this commit is simple:
it extends the BLOCK_IO_ERROR with a 'nospace' key, which is true
when QEMU is stopped due to ENOSPC.
Note that support for querying this event is already present in
query-block by means of the 'io-status' key. Also, the new 'nospace'
BLOCK_IO_ERROR field shares the same semantics with 'io-status',
which basically means that werror= has to be set to either
'stop' or 'enospc' to enable 'nospace'.
Finally, this commit also updates the 'io-status' key doc in the
schema with a list of supported device models.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When request A is a strict superset of request B:
AAAAAAAA
BBBB
multiwrite_merge() merges them as follows:
AABBBB
The tail of request A should have been included:
AABBBBAA
This patch fixes data loss but this code path is probably rare. Since
guests cannot assume ordering between in-flight requests, few
applications submit overlapping write requests.
Reported-by: Slava Pestov <sviatoslav.pestov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
If a long-running operation on a BDS wants to always remain in the same
AIO context, it somehow needs to keep track of the BDS changing its
context. This adds a function for registering callbacks on a BDS which
are called whenever the BDS is attached or detached from an AIO context.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Format names are best consumed in alphabetical order. This makes
human-readable output easy to produce.
bdrv_iterate_format() already has an array of format strings. Sort them
before invoking the iteration callback.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
Some block devices may not have a filename in their BDS; and for some,
there may not even be a normal filename at all. To work around this, add
a function which tries to construct a valid filename for the
BDS.filename field.
If a filename exists or a block driver is able to reconstruct a valid
filename (which is placed in BDS.exact_filename), this can directly be
used.
If no filename can be constructed, we can still construct an options
QDict which is then converted to a JSON object and prefixed with the
"json:" pseudo protocol prefix. The QDict is placed in
BDS.full_open_options.
For most block drivers, this process can be done automatically; those
that need special handling may define a .bdrv_refresh_filename() method
to fill BDS.exact_filename and BDS.full_open_options themselves.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
Patch created with Coccinelle, with two manual changes on top:
* Add const to bdrv_iterate_format() to keep the types straight
* Convert the allocation in bdrv_drop_intermediate(), which Coccinelle
inexplicably misses
Coccinelle semantic patch:
@@
type T;
@@
-g_malloc(sizeof(T))
+g_new(T, 1)
@@
type T;
@@
-g_try_malloc(sizeof(T))
+g_try_new(T, 1)
@@
type T;
@@
-g_malloc0(sizeof(T))
+g_new0(T, 1)
@@
type T;
@@
-g_try_malloc0(sizeof(T))
+g_try_new0(T, 1)
@@
type T;
expression n;
@@
-g_malloc(sizeof(T) * (n))
+g_new(T, n)
@@
type T;
expression n;
@@
-g_try_malloc(sizeof(T) * (n))
+g_try_new(T, n)
@@
type T;
expression n;
@@
-g_malloc0(sizeof(T) * (n))
+g_new0(T, n)
@@
type T;
expression n;
@@
-g_try_malloc0(sizeof(T) * (n))
+g_try_new0(T, n)
@@
type T;
expression p, n;
@@
-g_realloc(p, sizeof(T) * (n))
+g_renew(T, p, n)
@@
type T;
expression p, n;
@@
-g_try_realloc(p, sizeof(T) * (n))
+g_try_renew(T, p, n)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-img check calls bdrv_check() twice if the first run repaired some
inconsistencies. If the first run however again triggered corruption
prevention (on qcow2) due to very bad inconsistencies, bs->drv may be
NULL afterwards. Thus, bdrv_check() should check whether bs->drv is set.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some code in the block layer makes potentially huge allocations. Failure
is not completely unexpected there, so avoid aborting qemu and handle
out-of-memory situations gracefully.
This patch addresses bounce buffer allocations in block.c. While at it,
convert bdrv_commit() from plain g_malloc() to qemu_try_blockalign().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This function returns NULL instead of aborting when an allocation fails.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
If bdrv_unref() is passed a NULL BDS pointer, it is safe to
exit with no operation. This will allow cleanup code to blindly
call bdrv_unref() on a BDS that has been initialized to NULL.
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a BlockDriverState is associated with a storage controller
DeviceState we expect guest I/O. Use this opportunity to bump the
coroutine pool size by 64.
This patch ensures that the coroutine pool size scales with the number
of drives attached to the guest. It should increase coroutine pool
usage (which makes qemu_coroutine_create() fast) without hogging too
much memory when fewer drives are attached.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_get_geometry() hides errors. Use bdrv_nb_sectors() or
bdrv_getlength() instead where that's obviously inappropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It returns a multiple of the sector size.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Aside: a few of these callers don't handle errors. I didn't
investigate whether they should.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Replace variables length, length2 by total_sectors, nb_sectors2.
Bonus: use total_sectors instead of the slightly unclean
bs->total_sectors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of bdrv_getlength().
Variable target_size is initially in bytes, then changes meaning to
sectors. Ugh. Replace by target_sectors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A call to retrieve the image size converts between bytes and sectors
several times:
* BlockDriver method bdrv_getlength() returns bytes.
* refresh_total_sectors() converts to sectors, rounding up, and stores
in total_sectors.
* bdrv_getlength() converts total_sectors back to bytes (now rounded
up to a multiple of the sector size).
* Callers wanting sectors rather bytes convert it right back.
Example: bdrv_get_geometry().
bdrv_nb_sectors() provides a way to omit the last two conversions.
It's exactly bdrv_getlength() with the conversion to bytes omitted.
It's functionally like bdrv_get_geometry() without its odd error
handling.
Reimplement bdrv_getlength() and bdrv_get_geometry() on top of
bdrv_nb_sectors().
The next patches will convert some users of bdrv_getlength() to
bdrv_nb_sectors().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At least raw-posix relies on this because it can allocate bounce buffers
based on the request length, but access it using all of the qiov entries
later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a read request goes across EOF, the block driver sees a shortened
request that stops at EOF (the rest is memsetted in block.c), however
the original qiov was used for this request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
bdrv_is_allocated() should return either 0 or 1 in successful cases.
We're lucky that currently, the callers that rely on this (e.g. because
they check for ret == 1) don't seem to break badly. They just might skip
some optimisation or in the case of qemu-io 'map' print separate lines
where a single line would suffice. In theory, a wrong allocation status
could lead to image corruption with certain operations, so let's fix
this quickly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch introduces three APIs so that following
patches can support queuing I/O requests and submitting them
as a batch for improving I/O performance.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a small helper function, to determine if 'base' is in the
chain of BlockDriverState 'top'. It returns true if it is in the chain,
and false otherwise.
If either argument is NULL, it will also return false.
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This simplifies the function bdrv_find_overlay(). With this change,
bdrv_find_base() is just a subset of usage of bdrv_find_overlay(),
so this also takes advantage of that.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When failure occurs, 'ret' need be set, or may return 0 to indicate
success. Previously, an error was set in errp, but 0 was returned
anyway. So let bdrv_append_temp_snapshot() return an error code and
use that for the bdrv_open() return value.
Also, error_propagate() need be called only one time within a function.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we check for the RESIZE blocker in bdrv_truncate(), that means a
commit will fail if the overlay layer is larger than the base, due to
the backing blocker.
This is a regression in behavior from 2.0; currently, commit will try to
grow the size of the base image to match the overlay size, if the
overlay size is larger.
By moving this into the QMP command qmp_block_resize(), it allows
usage of bdrv_truncate() within block jobs.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only semantic change is that bs->open_flags gets BDRV_O_PROTOCOL set
now. This isn't useful, but it doesn't hurt either. The code that was
previously skipped by 'goto done' is automatically disabled because
protocol drivers don't support backing files (and if they did, this
would probably be a fix) and can't have snapshot_flags set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This recursion was introduced in commit 505d7583 in order to allow
nesting image formats. It only ever takes effect when the user
explicitly specifies a driver name and that driver isn't suitable for
the protocol level.
We can check this earlier in bdrv_open() and if the explicitly
requested driver is a format driver, clear BDRV_O_PROTOCOL so that
another bs->file layer is opened.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It doesn't do much any more, we can move the code to bdrv_open() now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
This moves the bdrv_open_file() call a bit down so that it can use the
bdrv_open() code that selects the right block driver.
The code between the old and the new call site is either common code
(the error message for an unknown driver has been unified now) or
doesn't run with cleared BDRV_O_PROTOCOL (added an if block in one
place, whereas the right path was already asserted in another place)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
The "driver" entry in the options QDict is now only missing if we're
opening an image with format probing.
We also catch cases now where both the drv argument and a "driver"
option is specified, e.g. by specifying -drive format=qcow2,driver=raw
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The idea of bdrv_fill_options() is to convert every parameter for
opening images, in particular the filename and flags, to entries in the
options QDict.
This patch starts with moving the filename parsing and driver probing
part from bdrv_file_open() to the new function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'buf' is not used actually, so remove it and related snprintf() statement.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
With virtio-blk dataplane, I/O errors might occur while QEMU is
not in the main I/O thread. However, it's invalid to call vm_stop
when we're neither in a VCPU thread nor in the main I/O thread,
even if we were to take the iothread mutex around it.
To avoid this problem, we can raise a request to the main I/O thread,
similar to what QEMU does when vm_stop is called from a CPU thread.
We know that bdrv_error_action is called from an AIO callback, and
the moment at which the callback will fire is not well-defined; it
depends on the moment at which the disk or OS finishes the operation,
which can happen at any time. Note that QEMU is certainly not in a CPU
thread and we do not need to call cpu_stop_current() like vm_stop() does.
However, we need to ensure that any action taken by management will
result in correct detection of the error _and_ a running VM. In particular:
- the event must be raised after the iostatus has been set, so that
"info block" will return an iostatus that matches the event.
- the VM must be stopped after the iostatus has been set, so that
"info block" will return an iostatus that matches the runstate.
The ordering between the STOP and BLOCK_IO_ERROR events is preserved;
BLOCK_IO_ERROR is documented to come first.
This makes bdrv_error_action() thread safe (assuming QMP events are,
which is attacked by a separate series).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change block layer to support both QemuOpts and QEMUOptionParameter.
After this patch, it will change backend drivers one by one. At the end,
QEMUOptionParameter will be removed and only QemuOpts is kept.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Block I/O throttling uses timers and currently always adds them to the
main loop. Throttling will break if bdrv_set_aio_context() is used to
move a BlockDriverState to a different AioContext.
This patch adds throttle_detach/attach_aio_context() interfaces so the
throttling timers and uses them to move timers to the new AioContext.
Note that bdrv_set_aio_context() already drains all requests so we're
sure no throttled requests are pending.
The test cases need to be updated since the throttle_init() interface
has changed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Up until now all BlockDriverState instances have used the QEMU main loop
for fd handlers, timers, and BHs. This is not scalable on SMP guests
and hosts so we need to move to a model with multiple event loops on
different host CPUs.
bdrv_set_aio_context() assigns the AioContext event loop to use for a
particular BlockDriverState. It first detaches the entire
BlockDriverState graph from the current AioContext and then attaches to
the new AioContext.
This function will be used by virtio-blk data-plane to assign a
BlockDriverState to its IOThread AioContext. Make
bdrv_aio_set_context() public since data-plane should not include
block_int.h.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Modify bdrv_drain_all() to take into account that BlockDriverState
instances may be running in different AioContexts.
This patch changes the implementation of bdrv_drain_all() while
preserving the semantics. Previously kicking throttled requests and
checking for pending requests were done across all BlockDriverState
instances in sequence. Now we process each BlockDriverState in turn,
making sure to acquire and release its AioContext.
This prevents race conditions between the thread executing
bdrv_drain_all() and the thread running the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_close_all(), bdrv_commit_all(), bdrv_flush_all(),
bdrv_invalidate_cache_all(), and bdrv_clear_incoming_migration_all() are
called by main loop code and touch all BlockDriverState instances.
Some BlockDriverState instances may be running in another AioContext.
Make sure to acquire the AioContext before closing the BlockDriverState.
This will protect against race conditions once virtio-blk data-plane is
using the BlockDriverState from another AioContext event loop.
Note that this patch does not convert bdrv_drain_all() yet since that
conversion is non-trivial.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the assumption that we're using the main AioContext. Convert
qemu_aio_wait() to aio_poll() and qemu_bh_new() to aio_bh_new() so the
BlockDriverState AioContext is used.
Note there is still one qemu_aio_wait() left in bdrv_create() but we do
not have a BlockDriverState there and only main loop code invokes this
function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduced in commit da557a. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The above bdrv_set_backing_hd already does this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes use of op_blocker and blocks all the operations except for
commit target, on each BlockDriverState->backing_hd.
The asserts for op_blocker in bdrv_swap are removed because with this
change, the target of block commit has at least the backing blocker of
its child, so the assertion is not true. Callers should do their check.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need to handle the coming backing_blocker properly, so don't open
code the assignment, instead, call bdrv_set_backing_hd to change
backing_hd.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the common but non-trivial steps to assign or change the
backing_hd of BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This drops BlockDriverState.in_use with op_blockers:
- Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1).
- Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0).
- Check bdrv_op_is_blocked() in place of bdrv_in_use(bs).
The specific types are used, e.g. in place of starting block backup,
bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...).
There is one exception in block_job_create, where
bdrv_op_blocker_is_empty() is used, because we don't know the operation
type here. This doesn't matter because in a few commits away we will drop
the check and move it to callers that _do_ know the type.
- Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use).
Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at
this moment. So although the checks are specific to op types, this
changes can still be seen as identical logic with previously with
in_use. The difference is error message are improved because of blocker
error info.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
BlockDriverState.op_blockers is an array of lists with BLOCK_OP_TYPE_MAX
elements. Each list is a list of blockers of an operation type
(BlockOpType), that marks this BDS as currently blocked for a certain
type of operation with reason errors stored in the list. The rule of
usage is:
* BDS user who wants to take an operation should check if there's any
blocker of the type with bdrv_op_is_blocked().
* BDS user who wants to block certain types of operation, should call
bdrv_op_block (or bdrv_op_block_all to block all types of operations,
which is similar to the existing bdrv_set_in_use()).
* A blocker is only referenced by op_blockers, so the lifecycle is
managed by caller, and shouldn't be lost until unblock, so typically
a caller does these:
- Allocate a blocker with error_setg or similar, call bdrv_op_block()
to block some operations.
- Hold the blocker, do his job.
- Unblock operations that it blocked, with the same reason pointer
passed to bdrv_op_unblock().
- Release the blocker with error_free().
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the filename given to bdrv_open() is prefixed with "json:", parse the
rest as a JSON object and merge the result into the options QDict. If
there are conflicts, the options QDict takes precedence.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_is_allocated() shouldn't return true for sectors that are
unallocated, but after the end of a short backing file, even though
such sectors are (correctly) marked as containing zeros.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The immediately visible effect of this patch is that it fixes committing
a temporary snapshot to its backing file. Previously, it would fail with
a "permission denied" error because bdrv_inherited_flags() forced the
backing file to be read-only, ignoring the r/w reopen of bdrv_commit().
The bigger problem this revealed is that the original open flags must
actually only be applied to the temporary snapshot, and the original
image file must be treated as a backing file of the temporary snapshot
and get the right flags for that.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use the same function as bdrv_open() for determining what the right
flags for bs->file are. Without doing this, a reopen means that
bs->file loses BDRV_O_CACHE_WB or BDRV_O_UNMAP if bs doesn't have it as
well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This reverts commit 3a389e7926. The commit
was wrong and what it tried to fix just works today without any change.
What the commit tried to fix:
When creating live snapshots, the new image file is opened with
BDRV_O_NO_BACKING because the whole backing chain is already opened.
It is then appended to the chain using bdrv_append(). The result of
this was that the image had a backing file, but BDRV_O_NO_BACKING
was still set. This is obviously inconsistent.
There used to be some places in qemu that closed and image and then
opened it again, with its old flags (a bdrv_open()/close() sequence
involves reopening the whole backing file chain, too). In this case
the BDRV_O_NO_BACKING flag meant that the backing chain wasn't
reopened and only the top layer was left.
(Most, but not all of these places are replaced by bdrv_reopen()
today, which doesn't touch the backing files at all.)
Other places that looked at bs->open_flags weren't interested in
BDRV_O_NO_BACKING, so no breakage there.
What it actually did:
The commit moved the BDRV_O_NO_BACKING away to the backing file.
Because the bdrv_open()/close() sequences only looked at the flags
of the top level BlockDriverState and used it for the whole chain,
the flag didn't hurt there any more. Obviously, it is still
inconsistent because the backing file may have another backing file,
but without practical impact.
At the same time, it swapped all other flags. This is practically
irrelevant as long as live snapshots only allow opening the new
layer with the same flags as the old top layer. It still doesn't
make any sense, and it is a time bomb that explodes as soon as the
flags can differ.
bdrv_append_temp_snapshot() is such a case: It adds the new flag
BDRV_O_TEMPORARY for the temporary snapshot. The swapping of commit
3a389e79 results in the following nonsensical configuration:
bs->open_flags: BDRV_O_TEMPORARY cleared
bs->file->open_flags: BDRV_O_TEMPORARY set
bs->backing_hd->open_flags: BDRV_O_TEMPORARY set
bs->backing_hd->file->open_flags: BDRV_O_TEMPORARY cleared
We're still lucky because the format layer ignores the flag and the
protocol layer happens to get the right value, but sooner or later
this is bound to go wrong...
What the right fix would have been:
Simply clear the BDRV_O_NO_BACKING flag when the BlockDriverState is
appended to an existing backing file chain, because now it does have
a backing file.
Commit 4ddc07ca already implemented this silently in bdrv_append(),
so we don't have to come up with a new fix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of having unlink() calls in the generic block layer, where we
aren't even guarateed to have a file name, move them to those block
drivers that are actually used and that always have a filename. Gets us
rid of some #ifdefs as well.
The patch also converts bs->is_temporary to a new BDRV_O_TEMPORARY open
flag so that it is inherited in the protocol layer and the raw-posix and
raw-win32 drivers can unlink the file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Copy on Read makes sense on the format level where backing files are
implemented, but it's not required on the protocol level. While it
shouldn't actively break anything to have COR enabled on both layers,
needless serialisation and allocation checks may impact performance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of manipulation flags inline, move the derivation of the flags
of a backing file into a new function next to the existing functions
that derive flags for bs->file and for the block driver open function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of having bdrv_open_flags() as a function that creates flags for
several unrelated places and then adding open-coded flags on top, create
a new function that derives the flags for bs->file from the flags for bs.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Some block drivers have multiple BlockDriver instances with identical
format_name fields (e.g. gluster, nbd).
Both qemu-img and qemu will use bdrv_iterate_format() to list the
supported formats when a help option is invoked. As protocols and
formats may register multiple drivers, redundant listings of formats
occur (e.g., "Supported formats: ... gluster gluster gluster gluster ...
").
Since the list of driver formats will be small, this performs a simple
linear search on format_name, and ignores any duplicates.
The end result change is that the iterator will no longer receive
duplicate string names, nor will it receive NULL pointers.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Commit 84d18f0 dumbed
it down to obvious, but a few more have crept in since, and
documentation was overlooked. Dumb these down, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In 1.7.1 qcow2_create2 reopen the file for flushing without the BDRV_O_NO_BACKING
flags.
As a consequence the code would recursively open the whole backing chain.
These three stack arrays would pile up through the recursion and lead to a coroutine
stack overflow.
Convert these array to malloced buffers in order to streamline the coroutine
footprint.
Symptoms where freezes or segfaults on production machines while taking QMP externals
snapshots. The overflow disturbed coroutine switching.
[Resolved conflicts on qemu.git/master since the patch was against v1.7.1
--Stefan]
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Since commit f298d071, block devices added with blockdev-add don't have
a QemuOpts around in dinfo->opts. Consequently, we can't rely any more
on QemuOpts catching duplicate IDs for block devices.
This patch adds a new check for duplicate IDs to bdrv_new(), and moves
the existing check that the ID isn't already taken for a node-name there
as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds an errp parameter to bdrv_new() and updates all its
callers. The next patches will make use of this in order to check for
duplicate IDs. Most of the callers know that their ID is fine, so they
can simply assert that there is no error.
Behaviour doesn't change with this patch yet as bdrv_new() doesn't
actually assign errors to errp.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_getlength could fail, check the return value before using it.
Return NULL and set errno if it fails. Callers are updated to handle
the error case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Insanely large requests could cause an integer overflow in
bdrv_rw_co() while converting sectors to bytes. This patch catches the
problem and returns an error (if we hadn't overflown the integer here,
bdrv_check_byte_request() would have rejected the request, so we're not
breaking anything that was supposed to work before).
We actually do have a test case that triggers behaviour where we
accidentally let such a request pass, so that it would return success,
but read 0 bytes instead of the requested 4 GB. It fails now like it
should.
If the vdi block driver wants to be able to deal with huge images, it
can't read the whole block bitmap at once into memory like it does
today, but needs to use a metadata cache like qcow2 does.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 8f4754ed intended to protect against integer overflow bugs in
block drivers by making sure that a single request that is passed to
drivers is no longer than INT_MAX bytes.
However, meanwhile there are some callers that don't use that code path
any more but call bdrv_check_byte_request() directy, so let's add a
check there as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Since commit 9fd3171a, BDRV_O_SNAPSHOT uses an option QDict to specify
the originally requested image as the backing file of the newly created
temporary snapshot. This means that the filename is stored in
"file.filename", which is an option that is not parsed for protocol
names. Therefore things like -drive file=nbd:localhost:10809 were
broken because it looked for a local file with the literal name
'nbd:localhost:10809'.
This patch changes the way BDRV_O_SNAPSHOT works once again. We now open
the originally requested image as normal, and then do a similar
operation as for live snapshots to put the temporary snapshot on top.
This way, both driver specific options and parsed filenames work.
As a nice side effect, this results in code movement to factor
bdrv_append_temp_snapshot() out. This is a good preparation for moving
its call to drive_init() and friends eventually.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When using the QDict option 'filename', it is supposed to be interpreted
literally. The code did correctly avoid guessing the protocol from any
string before the first colon, but it still called bdrv_parse_filename()
which would, for example, incorrectly remove a 'file:' prefix in the
raw-posix driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Limiting the size of a single request to INT_MAX not only fixes a
direct integer overflow in bdrv_check_request() (which would only
trigger bad behaviour with ridiculously huge images, as in close to
2^64 bytes), but can also prevent overflows in all block drivers.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If it returns an error, the migrated VM will not be started, but qemu
exits with an error message.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Opening an encrypted image takes an additional step: setting the key.
Between open and the key set, the image must not be used.
We have some protection against accidental use in place: you can't
unpause a guest while we're missing keys. You can, however, hot-plug
block devices lacking keys into a running guest just fine, or insert
media lacking keys. In the latter case, notifying the guest of the
insert is delayed until the key is set, which may suffice to protect
at least some guests in common usage.
This patch makes the protection apply in more cases, in a rather
heavy-handed way: it doesn't let you open encrypted images unless
we're in a paused state.
It doesn't extend the protection to users other than the guest (block
jobs?). Use of runstate_check() from block.c is disgusting. Best I
can do right now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the image file cannot be opened and was created as a temporary file,
it should be deleted; thus, in this case, we should jump to the
"unlink_and_fail" label and not just to "fail".
Reported-by: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch keep the recursive way of doing things but simplify it by giving
two responsabilities to all block filters implementors.
They will need to do two things:
-Set the is_filter field of their block driver to true.
-Implement the bdrv_recurse_is_first_non_filter method of their block driver like
it is done on the Quorum block driver. (block/quorum.c)
[Paolo Bonzini <pbonzini@redhat.com> pointed out that this patch changes
the semantics of blkverify, which now recurses down both bs->file and
s->test_file.
-- Stefan]
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, bdrv_debug_resume() requires every bs->drv in the BDS stack
to be NULL until a bs->drv with an implementation of bdrv_debug_resume()
is found. For a normal function, this would be fine, but this is a
function for debugging purposes and should therefore allow intermediate
BDS not to have a driver (i.e., be "ejected"). Otherwise, it is hard to
debug such situations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After migration has completed, we call bdrv_invalidate_cache() so that
drivers which cache some data drop their stale copy of the data and
reread it from the image file to get a new version of data that the
source modified while the migration was running.
Reloading metadata from the image file is useless, though, if the size
of the image file stays stale (this is a value that is cached for all
image formats in block.c). Reads from (meta)data after the old EOF
return only zeroes, causing image corruption.
We need to update bs->total_sectors in all layers that could potentially
have changed their size (i.e. backing files are not a concern - if they
are changed, we're in bigger trouble)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using an invalid option for a block device that is opened with
BDRV_O_PROTOCOL led to drv = NULL, and when trying to include the driver
name in the error message, qemu dereferenced it:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
Segmentation fault (core dumped)
With this patch applied, the expected error message is printed:
$ x86_64-softmmu/qemu-system-x86_64 -drive file=/tmp/test.qcow2,file.foo=bar
qemu-system-x86_64: -drive file=/tmp/test.qcow2,file.foo=bar: could
not open disk image /tmp/test.qcow2: Block protocol 'file' doesn't
support the option 'foo'
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Currently, bdrv_file_open() always removes the "filename" option from
the options QDict after bdrv_parse_filename() has been (successfully)
called. However, for drivers with bdrv_needs_filename, it makes more
sense for bdrv_parse_filename() to overwrite the "filename" option and
for bdrv_file_open() to fetch the filename from there.
Since there currently are no drivers that implement
bdrv_parse_filename() and have bdrv_needs_filename set, this does not
change current behavior.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Moving only the node_name one field could lead to some inconsitencies where a
node_name was defined on a bs which was not registered in the graph node list.
bdrv_swap between a named node bs and a non named node bs would lead to this.
bdrv_make_anon would then crash because it would try to remove the bs from the
graph node list while it is not in it.
This patch remove named node bses from the graph node list before doing the swap
then insert them back.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For sg backends, bs->request_alignment is meaningless and may be 0.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
If TMPDIR is not specified, the default was to use /tmp for the working
copy of the block devices. Update this to /var/tmp instead, so systems
using tmp-on-tmpfs don't end up inadvertently using RAM for the block
device.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This option is now unnecessary since specifying BDRV_O_PROTOCOL as flag
will do exactly the same.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The fail and success paths of bdrv_file_open() may be further shortened
by reusing code already existent in bdrv_open(). This includes
bdrv_file_open() not taking the reference to options which allows the
removal of QDECREF(options) in that function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The fail paths of bdrv_file_open() and bdrv_open() naturally exhibit
similarities, thus it is possible to reuse the one from bdrv_open() and
shorten the one in bdrv_file_open() accordingly.
Also, setting bs->options in bdrv_file_open() is not necessary if it is
already done in bdrv_open().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Change bdrv_file_open() to take a simple pointer to an already existing
BDS instead of an indirect one. The BDS will be created in bdrv_open()
if necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remove the reference parameter and the related handling code from
bdrv_file_open(), since it exists in bdrv_open() now as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the bdrv_open() option BDRV_O_PROTOCOL which results in passing the
call to bdrv_file_open(). Additionally, make bdrv_file_open() static and
therefore bdrv_open() the only way to call it.
Consequently, all existing calls to bdrv_file_open() have to be adjusted
to use bdrv_open() with the BDRV_O_PROTOCOL flag instead.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow bdrv_open() to handle references to existing block devices just as
bdrv_file_open() is already capable of.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make bdrv_open() take a pointer to a BDS pointer, similarly to
bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open()
will create a new BDS with an empty name; if the BDS pointer is not
NULL, that existing BDS will be reused (in the same way as bdrv_open()
already did).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Consider top level BlockDriverStates as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Tested-by: Benoit Canet <benoit@irqsave.net>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since we introduced node_name for named bs of the graph modify the opening by
reference to use it as a fallback.
This patch also enforce the separation of the device id and graph node
namespaces.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The following patch will reuse bdrv_lookup_bs in order to open images by
references so the rules of usage of bdrv_lookup_bs must be relaxed a bit.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On 32 bit hosts, size_t is too small for align as the bitmask
~(align - 1) will zero out the higher 32 bits of the offset.
While at it, change the local overlap_bytes variable to unsigned to
match the field in BdrvTrackedRequest.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The behaviour of the ROUND_UP macro with negative numbers isn't obvious.
It happens to do the right thing in this please, but better avoid it.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This adds assertions that the request that we actually end up passing to
the block driver (which includes RMW data and has therefore potentially
been rounded to alignment boundaries) is fully covered by the
overlap_{offset,size} fields of the associated BdrvTrackedRequest.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The error path for a failure in one of the two bdrv_aligned_preadv()
calls leaked head_buf or tail_buf, respectively. This fixes the memory
leak.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This fixes a regression introduced in commit 2a05cbe42 ('block: Allow
block devices without files'):
$ qemu-system-x86_64 -drive driver=file
qemu-system-x86_64: block.c:892: bdrv_open_common: Assertion
`!drv->bdrv_needs_filename || filename != ((void *)0)' failed.
Now the respective check must be performed not only in bdrv_file_open(),
but also in bdrv_open().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Request sizes used to be rounded down to the next sector boundary,
allowing to bypass the I/O limit. Now all requests are accounted for
with their exact byte size.
Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_pwritev().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_preadv().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a request calls wait_serialising_requests() and actually has to wait
in this function (i.e. a coroutine yield), other requests can run and
previously read data (like the head or tail buffer) could become
outdated. In this case, we would have to restart from the beginning to
read in the updated data.
However, we're lucky and don't actually need to do that: A request can
only wait in the first call of wait_serialising_requests() because we
mark it as serialising before that call, so any later requests would
wait. So as we don't wait in practice, we don't have to reload the data.
This is an important assumption that may not be broken or data
corruption will happen. Document it with some assertions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
This patch changes bdrv_co_do_pwritev() to actually be what its name
promises. If requests aren't properly aligned, it performs a RMW.
Requests touching the same block are serialised against the RMW request.
Further optimisation of this is possible by differentiating types of
requests (concurrent reads should actually be okay here).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
We can only have a single wait_serialising_requests() call per request
because otherwise we can run into deadlocks where requests are waiting
for each other. The same is true when wait_serialising_requests() is not
at the very beginning of a request, so that other requests can be issued
between the start of the tracking and wait_serialising_requests().
Fix this by changing wait_serialising_requests() to ignore requests that
are already (directly or indirectly) waiting for the calling request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Copy on Read wants to serialise with all requests touching the same
cluster, so wait_serialising_requests() rounded to cluster boundaries.
Other users like alignment RMW will have different requirements, though
(requests touching the same sector), so make it dynamic.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Change the API so that specific requests can be marked serialising. Only
these requests are checked for overlaps then.
This means that during a Copy on Read operation, not all requests
overlapping other requests are serialised any more, but only those that
actually overlap with the specific COR request.
Also remove COR from function and variable names because this
functionality can be useful in other contexts.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Odd file sizes could make bdrv_aligned_preadv() shorten the request in
non-aligned ways. Fix it by rounding to the required alignment instead
of 512 bytes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Previously, it was not possible to use wait_for_overlapping_requests()
between tracked_request_begin()/end() because it would wait for itself.
Ignore the current request in the overlap check and run more of the
bdrv_co_do_preadv/pwritev code with a BdrvTrackedRequest present.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This is going to become the bdrv_co_do_preadv() equivalent for writes.
In this patch, however, just a function taking byte offsets is created,
it doesn't align anything yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
First waiting for all COR requests to complete and calling the
throttling function afterwards means that the request could be delayed
and we still need to wait for the COR request even if it was issued only
after the throttled write request.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This separates the part of bdrv_co_do_writev() that needs to happen
before the request is modified to match the backend alignment, and a
part that needs to be executed afterwards and passes the request to the
BlockDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Similar to bdrv_pread(), which aligns byte-aligned request to 512 byte
sectors, bdrv_co_do_preadv() takes a byte-aligned request and aligns it
to the alignment specified in bs->request_alignment.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This separates the part of bdrv_co_do_readv() that needs to happen
before the request is modified to match the backend alignment, and a
part that needs to be executed afterwards and passes the request to the
BlockDriver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Add a bs->request_alignment field that contains the required
offset/length alignment for I/O requests and fill it in the raw block
drivers. Use ioctls if possible, else see what alignment it takes for
O_DIRECT to succeed.
While at it, also expose the memory alignment requirements, which may be
(and in practice are) different from the disk alignment requirements.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
The alignment field is now set to the value that is promised to the
guest, rather than required by the host. The next patches will make
QEMU aware of the host-provided values, so make this clear.
The alignment is also not about memory buffers, but about the sectors on
the disk, change the documentation of the field.
At this point, the field is set by the device emulation, but completely
ignored by the block layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
bs->buffer_alignment is set by the device emulation and contains the
logical block size of the guest device. This isn't something that the
block layer should know, and even less something to use for determining
the right alignment of buffers to be used for the host.
The new BlockLimits field opt_mem_alignment tells the qemu block layer
the optimal alignment to be used so that no bounce buffer must be used
in the driver.
This patch may change the buffer alignment from 4k to 512 for all
callers that used qemu_blockalign() with the top-level image format
BlockDriverState. The value was never propagated to other levels in the
tree, so in particular raw-posix never required anything else than 512.
While on disks with 4k sectors direct I/O requires a 4k alignment,
memory may still be okay when aligned to 512 byte boundaries. This is
what must have happened in practice, because otherwise this would
already have failed earlier. Therefore I don't expect regressions even
with this intermediate state. Later, raw-posix can implement the hook
and expose a different memory alignment requirement.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
For an O_DIRECT request to succeed, it's not only necessary that all
base addresses in the qiov are aligned, but also that each length in it
is aligned.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When reopening with different flags, or when backing files disappear
from the chain, the limits may change. Make sure they get updated in
these cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
When there is a format driver between the backend, it's not guaranteed
that exposing the opt_transfer_length for the format driver results in
the optimal requests (because of fragmentation etc.), but it can't make
things worse, so let's just do it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
This function separates filling the BlockLimits from bdrv_open(), which
allows it to call it from other operations which may change the limits
(e.g. modifications to the backing file chain or bdrv_reopen)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
bdrv_commit() could return 0 or 1 on success, depending on whether or
not the last sector was allocated in the overlay and whether the overlay
format had a .bdrv_make_empty callback.
Most callers ignored it, but qemu-img commit would print an error
message while the operation actually succeeded.
Also clean up the handling of I/O errors to return the real error code
instead of -EIO.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Currently, if an image file is logically larger than its backing file,
committing it via 'qemu-img commit' will fail.
For instance, if we have a base image with a virtual size 10G, and a
snapshot image of size 20G, then committing the snapshot offline with
'qemu-img commit' will likely fail.
This will automatically attempt to resize the base image, if the
snapshot image to be committed is larger.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
There was two candidate ways to implement named node manipulation:
1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
'*node-name': 'str', 'password': 'str'}
}
2)
{ 'command': 'block_passwd', 'data': {'device': 'str',
'*device-is-node': 'bool',
'password': 'str'} }
Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.
Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.
Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.
Kevin argued that all bs are node including devices ones so 2 does not make
sense.
Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.
Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.
A vote has been done on the list to elect the version to use and 1 won.
For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the minimum of code to prepare for the following patches.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a backing file is opened such that (1) a protocol is directly
used as the block driver and (2) the block driver has bdrv_file_open,
bdrv_open_backing_file segfaults. The problem arises because
bdrv_open_common returns without setting bd->backing_hd->file.
To effect (1), you seem to have to use the -F flag in qemu-img. There
are several block drivers that satisfy (2), such as "file" and "nbd".
Here are some concrete examples:
#!/bin/bash
echo Test file format
./qemu-img create -f file base.file 1m
./qemu-img create -f qcow2 -F file -o backing_file=base.file\
file-overlay.qcow2
./qemu-img convert -O raw file-overlay.qcow2 file-convert.raw
echo Test nbd format
SOCK=$PWD/nbd.sock
./qemu-img create -f raw base.raw 1m
./qemu-nbd -t -k $SOCK base.raw &
trap "kill $!" EXIT
while ! test -e $SOCK; do sleep 1; done
./qemu-img create -f qcow2 -F nbd -o backing_file=nbd:unix:$SOCK\
nbd-overlay.qcow2
./qemu-img convert -O raw nbd-overlay.qcow2 nbd-convert.raw
Without this patch, the two qemu-img convert commands segfault.
This is a regression that was introduced in v1.7 by
dbecebddfa.
Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It should be possible to use a format as a driver for a file which in
turn requires another file, i.e., nesting file formats.
Allowing nested file formats results in e.g. qcow2 BlockDriverStates
never being directly passed to bdrv_open_common() from bdrv_file_open(),
but instead being handed through bdrv_open(). This changes the error
message when trying to give a filename to qcow2, i.e. trying to use it
as a driver for the protocol level. Therefore, change the reference
output of I/O test 051 accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using bdrv_open_image() instead of bdrv_file_open() directly in
bdrv_open() is easier.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a common function for opening images to be used for block drivers
specified through BlockdevRefs in an option QDict. The difference from
bdrv_file_open() is that this function may invoke bdrv_open() instead,
allowing auto-detection of the driver to be used; and second, it
automatically extracts the BlockdevRef from the option QDict.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blkdebug and blkverify will, in order to retain compatibility, not
support the field "file" implicitly through bdrv_open(). In order to be
able to use those drivers without giving a filename anyway, it is
necessary to be able to have block devices without files implicitly
opened by bdrv_open(). This is the case, if there was neither a file
name, a reference to an existing block device to use as a file nor
options specific to the file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With that now being possible, bdrv_open() should try to extract a block
device reference from the options and pass it to bdrv_file_open().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Allow specifying a reference to an existing block device (by name) for
bdrv_file_open() instead of a filename and/or options.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
during testing around with 4k LUNs a bad target implementation
triggert an -EIO in iscsi_get_block_status, but it got never caught
resulting in an infinite loop.
CC: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since cc0681c454 ("block: Enable the new
throttling code in the block layer.") bdrv_drain_all() no longer spins.
The code used to look as follows:
do {
busy = qemu_aio_wait();
/* FIXME: We do not have timer support here, so this is effectively
* a busy wait.
*/
QTAILQ_FOREACH(bs, &bdrv_states, list) {
while (qemu_co_enter_next(&bs->throttled_reqs)) {
busy = true;
}
}
} while (busy);
Note that throttle requests are kicked but I/O throttling limits are
still in effect. The loop spins until the vm_clock time allows the
request to make progress and complete.
The new throttling code introduced bdrv_start_throttled_reqs(). This
function not only kicks throttled requests but also temporarily disables
throttling so requests can run.
The outdated FIXME comment can be removed. Also drop the busy = true
assignment since we overwrite it immediately afterwards.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Leaving the backing file open although it is not needed anymore can
cause problems if it is opened through a block driver which allows
exclusive access only and if the create function of the block driver
used for the top image (the one being created) tries to close and reopen
the image file (which will include opening the backing file a second
time).
In particular, this will happen with a backing file opened through
qemu-nbd and using qcow2 as the top image file format (which reopens the
image to flush it to disk).
In addition, the BlockDriverState in bdrv_img_create() is used for the
backing file only; it should therefore be made local to the respective
block.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Right now, bdrv_co_do_write_zeroes will only try to align the
beginning of the request. However, it is simpler for many
formats to expect the block layer to separate both the head *and*
the tail. This makes sure that the format's bdrv_co_write_zeroes
function will be called with aligned sector_num and nb_sectors for
the bulk of the request.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Similar to write_zeroes, let the generic code receive a ENOTSUP for
discard operations. Since bdrv_discard has advisory semantics,
we can just swallow the error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will be used by the SCSI layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This lets bdrv_co_do_rw receive flags, so that it can be used for
zero writes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_co_discard is only covering drivers which have a .bdrv_co_discard()
implementation, but not those with .bdrv_aio_discard(). Not very nice,
and easy to avoid.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If you open an image temporarily just because you want to check its size
or get it flushed, there's no real reason to open the whole backing file
chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
In the case of snapshot=on, don't rely on the backing file path in the
temporary image any more, but override the backing file with the given
set of options. This way, block drivers that don't use a file name can
be accessed with snapshot=on, for example:
-drive file.driver=nbd,file.host=localhost,snapshot=on
Which becomes internally something like:
file.filename=/tmp/vl.AWQZCu,backing.file.driver=nbd,backing.file.host=localhost
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds "remove_break" command which is the reverse of blkdebug
command "break": it removes all breakpoints with given tag and resumes
all the requests.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We have multiple dirty bitmaps in BDS now, switch QAPI to allow query
it (BlockInfo.dirty_bitmaps), and also drop old BlockInfo.dirty.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously a BlockDriverState has only one dirty bitmap, so only one
caller (e.g. a block job) can keep track of writing. This changes the
dirty bitmap to a list and creates a BdrvDirtyBitmap for each caller, the
lifecycle is managed with these new functions:
bdrv_create_dirty_bitmap
bdrv_release_dirty_bitmap
Where BdrvDirtyBitmap is a linked list wrapper structure of HBitmap.
In place of bdrv_set_dirty_tracking, a BdrvDirtyBitmap pointer argument
is added to these functions, since each caller has its own dirty bitmap:
bdrv_get_dirty
bdrv_dirty_iter_init
bdrv_get_dirty_count
bdrv_set_dirty and bdrv_reset_dirty prototypes are unchanged but will
internally walk the list of all dirty bitmaps and set them one by one.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this patch does 2 things:
a) only do additional call outs if BDRV_BLOCK_ZERO is not already set.
b) use the newly introduced bdrv_unallocated_blocks_are_zero()
to return the zero state of an unallocated block. the used callout
to bdrv_has_zero_init() is only valid right after bdrv_create.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
this patch adds a call to completely zero out a block device.
the operation is sped up by checking the block status and
only writing zeroes to the device if they currently do not
return zeroes. optionally the zero writing can be sped up
by setting the flag BDRV_REQ_MAY_UNMAP to emulate the zero
write by unmapping if the driver supports it.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds 2 wrappers to read the unallocated_blocks_are_zero and
can_write_zeroes_with_unmap info from the BDI. The wrappers are
required to check for the existence of a backing_hd and
if the devices are opened with the correct flags.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
If backing file doesn't exist, the error message is confusing and
misleading:
$ qemu /tmp/a.qcow2
qemu: could not open disk image /tmp/a.qcow2: Could not open file: No
such file or directory
But...
$ ls /tmp/a.qcow2
/tmp/a.qcow2
$ qemu-img info /tmp/a.qcow2
image: /tmp/a.qcow2
file format: qcow2
virtual size: 8.0G (8589934592 bytes)
disk size: 196K
cluster_size: 65536
backing file: /tmp/b.qcow2
Because...
$ ls /tmp/b.qcow2
ls: cannot access /tmp/b.qcow2: No such file or directory
This is not intuitive. It's better to have the missing file's name in
the error message. With this patch:
$ qemu-io -c 'read 0 512' /tmp/a.qcow2
qemu-io: can't open device /tmp/a.qcow2: Could not open backing
file: Could not open '/stor/vm/arch.raw': No such file or directory
no file open, try 'help open'
Which is a little bit better.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since b94a2610, bdrv_getlength() is omitted when probing image. VMDK
monolithicFlat is broken by that because a file < 512 bytes can't be
read with its total_sectors truncated to 0. This patch round up the size
to BDRV_SECTOR_SIZE, when a image size is not sector aligned.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
error_setg_errno() may overwrite errno; therefore, its value should be
read before calling that function and not afterwards.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block layer generally keeps the size of an image cached in
bs->total_sectors so that it doesn't have to perform expensive
operations to get the size whenever it needs it.
This doesn't work however when using a backend that can change its size
without qemu being aware of it, i.e. passthrough of removable media like
CD-ROMs or floppy disks. For this reason, the caching is disabled when a
removable device is used.
It is obvious that checking whether the _guest_ device has removable
media isn't the right thing to do when we want to know whether the size
of the host backend can change. To make things worse, non-top-level
BlockDriverStates never have any device attached, which makes qemu
assume they are removable, so drv->bdrv_getlength() is always called on
the protocol layer. In the case of raw-posix, this causes unnecessary
lseek() system calls, which turned out to be rather expensive.
This patch completely changes the logic and disables bs->total_sectors
caching only for certain block driver types, for which a size change is
expected: host_cdrom and host_floppy on POSIX, host_device on win32; also
the raw format in case it sits on top of one of these protocols, but in
the common case the nested bdrv_getlength() call on the protocol driver
will use the cache again and avoid an expensive drv->bdrv_getlength()
call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Since commit 0ebd24e0a2,
bdrv_open_common will throw an error when trying to open a file
read-only with the BDRV_O_COPY_ON_READ flag set.
Although BDRV_O_RDWR is unset for the backing files,
BDRV_O_COPY_ON_READ is still passed on if copy-on-read was requested
for the drive. Let's unset this flag too before opening the backing
file, or bdrv_open_common will fail.
Signed-off-by: Thibaut LAURENT <thibaut.laurent@gmail.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_open_backing_file() tries to copy the backing file name using
pstrcpy directly after calling bdrv_open() to open the backing file
without checking whether that was actually successful. If it was not,
ps->backing_hd->file will probably be NULL and qemu will crash.
Fix this by moving pstrcpy after checking whether bdrv_open() succeeded.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If a read-only device is configured with copy-on-read=on, the old code
only prints a warning and automatically disables copy on read. Make it
a real error for blockdev-add.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The main intent of this patch is to consolidate the whitelist checks to
a single point in the code instead of spreading it everywhere. This adds
a nicer error message for read-only whitelisting, too, in places where
it was still missing.
The patch also contains a bonus bug fix: By finding the format first in
bdrv_open() and then independently checking against the whitelist only
later, we avoid the case that use of a non-whitelisted format results in
probing rather than an error message. Previously, this could happen when
using the driver=... option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
This field is used by blkverify to disable external snapshots creation.
It will also be used by block filters like quorum to disable external
snapshot creation.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if a raw device like an iscsi target or host device is used
the current implementation makes a second call out to get
the block status of bs->file.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for retrieving an ImageInfoSpecific object from a block
driver.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The content filename point to may be erased by qemu_opts_absorb_qdict()
in raw_open_common() in drv->bdrv_file_open()
So it's better to use bs->filename.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The content filename point to will be erased by qemu_opts_absorb_qdict()
in raw_open_common() in drv->bdrv_file_open()
So it's better to use bs->filename.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.
The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.
The first exception to this rule will be the quorum driver.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if the call is invoked through bdrv_is_allocated the caller might
expect *pnum = 0 on error. however, a new implementation of
bdrv_get_block_status might only return a negative exit value on
error while keeping *pnum untouched.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Providing backing.file.filename doesn't override backing file as expected:
$ x86_64-softmmu/qemu-system-x86_64 -drive \
file=/tmp/child.qcow2,backing.file.filename=/tmp/fake.qcow2
qemu-system-x86_64: -drive \
file=/tmp/child.qcow2,backing.file.filename=/tmp/fake.qcow2: could not
open disk image /tmp/child.qcow2: Can't specify 'file' and 'filename'
options at the same time
With
$ qemu-img info /tmp/child.qcow2
image: /tmp/child.qcow2
file format: qcow2
virtual size: 1.0G (1073741824 bytes)
disk size: 196K
cluster_size: 65536
backing file: /tmp/fake.qcow2
This fixes it by calling bdrv_get_full_backing_filename only if
backing.file.filename is not provided. Also save the backing file name
to bs->backing_file so the information is correct with HMP "info block".
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To read the last sector that is not aligned to sector boundary, current
code for growable backends, since commit 893a8f6 "block: Produce zeros
when protocols reading beyond end of file", drops the data and directly
returns zeroes. That is incorrect.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch adds the "amend" option to qemu-img which allows changing
image options on existing image files. It also adds the generic bdrv
implementation which is basically just a wrapper for the image format
specific function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Protocols return raw data, so you can assume the offsets to pass
through unchanged.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If the sectors are unallocated and we are past the end of the
backing file, they will read as zero.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Alternatively, this could use a "discard zeroes data" flag returned
by bdrv_get_info.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define the return value of get_block_status. Bits 0, 1, 2 and 9-62
are valid; bit 63 (the sign bit) is reserved for errors. Bits 3-8
are left for future extensions.
The return code is compatible with the old is_allocated API: if a driver
only returns 0 or 1 (aka BDRV_BLOCK_DATA) like is_allocated used to,
clients of is_allocated will not have any change in behavior. Still,
we will return more precise information in the next patches and the
new definition of bdrv_is_allocated is already prepared for this.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.
This also touches all block drivers with a mostly mechanical rename. The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This helps implementing is_allocated on top of get_block_status.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some bdrv_is_allocated callers do not expect errors, but the fallback
in qcow2.c might make other callers trip on assertion failures or
infinite loops.
Fix the callers to always look for errors.
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that bdrv_is_allocated detects coroutine context, the two can
use the same code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is more robust when the device has removable media.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_is_allocated can detect coroutine context and go through a fast
path, similar to other block layer functions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a BlockDriverState is growable, after every write we need to
check if bs->total_sectors might have changed. With this change,
bdrv_getlength does not need anymore a system call.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.
This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce bdrv_ref/bdrv_unref to manage the lifecycle of
BlockDriverState. They are unused for now but will used to replace
bdrv_delete() later.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The failing condition is checked immediately before the assertion, so
keeping the assertion is kind of redundant.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While Asias is debugging an issue creating qcow2 images on top of
non-file protocols. It boils down to this example using NBD:
$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock' -c 'read -v 0 512'
Notice the open -g option to set bs->growable. This means you can
read/write beyond end of file. Reading beyond end of file is supposed
to produce zeroes.
We rely on this behavior in qcow2_create2() during qcow2 image
creation. We create a new file and then write the qcow2 header
structure using bdrv_pwrite(). Since QCowHeader is not a multiple of
sector size, block.c first uses bdrv_read() on the empty file to fetch
the first sector (should be all zeroes).
Here is the output from the qemu-io NBD example above:
$ qemu-io -c 'open -g nbd+unix:///?socket=/tmp/nbd.sock' -c 'read -v 0 512'
00000000: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
00000010: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
00000020: ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ................
...
We are not zeroing the buffer! As a result qcow2 image creation on top
of protocols is not guaranteed to work even when file creation is
supported by the protocol.
[Adapted this patch to use bs->zero_beyond_eof.
-- Stefan]
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).
We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.
[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If a block driver has no file descriptors to monitor but there are still
active requests, it can return 1 from .io_flush(). This is used to spin
during synchronous I/O.
Stop relying on .io_flush() and instead check
QLIST_EMPTY(&bs->tracked_requests) to decide whether there are active
requests.
This is the first step in removing .io_flush() so that event loops no
longer need to have the concept of synchronous I/O. Eventually we may
be able to kill synchronous I/O completely by running everything in a
coroutine, but that is future work.
Note this patch moves bs->throttled_reqs initialization to bdrv_new() so
that bdrv_requests_pending(bs) can safely access it. In practice bs is
g_malloc0() so the memory is already zeroed but it's safer to initialize
the queue properly.
We also need to fix up block/stream.c:close_unused_images() to prevent
traversing a dangling pointer while it rearranges the backing file
chain. This is necessary since the new bdrv_drain_all() traverses the
backing file chain.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In bdrv_delete() make sure to call bdrv_make_anon() *after* bdrv_close()
so that the device is still seen by bdrv_drain_all() when iterating
bdrv_states.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttling code was segfaulting since commit
02ffb50448 because some qemu_co_queue_next caller
does not run in a coroutine.
qemu_co_queue_do_restart assume that the caller is a coroutinne.
As suggested by Stefan fix this by entering the coroutine directly.
Also make sure like suggested that qemu_co_queue_next() and
qemu_co_queue_restart_all() can be called only in coroutines.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is traditionally -drive format=..., which is now translated into
the new driver option. This gives us a more consistent way to select the
driver of BlockDriverStates that can be used in QMP context, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_flush() can fail, and bdrv_flush_all() should return an error as
well if this happens for a block device. It returns the first error
return now, but still at least tries to flush the remaining devices even
in error cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
One of the major reasons for doing something new for -blockdev and
blockdev-add was that the old block layer code parses filenames instead
of just taking them literally. So we should really leave it untouched
when it's passing using the new interfaces (like -drive
file.filename=...).
This allows opening relative file names that contain a colon.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Since 80ccf93b we flush the block device during close. The
bdrv_drain_all() call should come before bdrv_flush() to ensure guest
write requests have completed. Otherwise we may miss pending writes
when flushing.
Call bdrv_drain_all() again for safety as the final step after
bdrv_flush(). This should not be necessary but we can be paranoid here
in case bdrv_flush() left I/O pending.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
.has_zero_init defaults to 1 for all formats and protocols.
this is a dangerous default since this means that all
new added drivers need to manually overwrite it to 0 if
they do not ensure that a device is zero initialized
after bdrv_create().
if a driver needs to explicitly set this value to
1 its easier to verify the correctness in the review process.
during review of the existing drivers it turned out
that ssh and gluster had a wrong default of 1.
both protocols support host_devices as backend
which are not by default zero initialized. this
wrong assumption will lead to possible corruption
if qemu-img convert is used to write to such a backend.
vpc and vmdk also defaulted to 1 altough they support
fixed respectively flat extends. this has to be addresses
in separate patches. both formats as well as the mentioned
ssh and gluster are turned to the default of 0 with this
patch for safety.
a similar problem with the wrong default existed for
iscsi most likely because the driver developer did
oversee the default value of 1.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_add_before_write_notifier() function installs a callback that
is invoked before a write request is processed. This will be used to
implement copy-on-write point-in-time snapshots where we need to copy
out old data before overwriting it.
Note that BdrvTrackedRequest is moved to block_int.h since it is passed
to .notify() functions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Turning on discard options in qcow2 doesn't help a lot when the discard
requests that it issues are thrown away by the raw-posix layer. This
patch always enables discard functionality on the protocol level so that
it's the image format's responsibility to send (or not) discard
requests. Requests sent by the guest will be allowed or ignored by the
top level BlockDriverState, which depends on the discard=... option like
before.
In particular, this means that even without specifying options, the
qcow2 default of discarding deleted snapshots actually takes effect now,
both for qemu and qemu-img.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The call to drv->bdrv_reopen_prepare() can fail due to reasons
other than an open failure. Unfortunately, we can't use errno
nor -ret, cause they are not always set.
Stick to a generic error message then.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
This patch is a pure code move patch, except following modification:
1 get_human_readable_size() is changed to static function.
2 dump_human_image_info() is renamed to bdrv_image_info_dump().
3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs)
instead of direct traverse of global array 'bdrv_states'.
4 collect_snapshots() and collect_image_info() are renamed, unused parameter
*fmt in collect_image_info() is removed.
5 code style fix.
To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H
instead of QAPI_H. Now block.h and snapshot.h are at the same level in
include path, block_int.h and qapi.h will both include them.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All snapshot related code, except bdrv_snapshot_dump() and
bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump()
will be moved to another file later. bdrv_is_snapshot() is not related
with internal snapshot. It also fixes small code style errors reported
by check script.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bs_snapshots global variable points to the BlockDriverState which
will be used to save vmstate. This is really a savevm.c concept but was
moved into block.c:bdrv_snapshots() when it became clear that hotplug
could result in a dangling pointer.
While auditing the block layer's global state I came upon bs_snapshots
and realized that a variable is not necessary here. Simply find the
first BlockDriverState capable of internal snapshots each time this is
needed.
The behavior of bdrv_snapshots() is preserved across hotplug because new
drives are always appended to the bdrv_states list. This means that
calling the new find_vmstate_bs() function is idempotent - it returns
the same BlockDriverState unless it was hot-unplugged.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We may want to include a driver in the whitelist for read only tasks
such as diagnosing or exporting guest data (with libguestfs as a good
example). This patch introduces a readonly whitelist option, and for
backward compatibility, the old configure option --block-drv-whitelist
is now an alias to rw whitelist.
Drivers in readonly list is only permitted to open file readonly, and
returns -ENOTSUP for RW opening.
E.g. To include vmdk readonly, and others read+write:
./configure --target-list=x86_64-softmmu \
--block-drv-rw-whitelist=qcow2,raw,file,qed \
--block-drv-ro-whitelist=vmdk
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The limit of qcow2 files at least depends on the cluster size. If the
image format has a cluster_size option, suggest to increase it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
filename was still uninitialised when it's used as a parameter to a
tracing function, so let's move the initialisation. Also, commit c2ad1b0c
forgot to add a NULL check, which this patch adds while we're at it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1366645720-11384-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a filename is passed in the driver-specific options from the command
line, the backing file path from the image is ignored now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This allows using the file.filename option instead of the string that
comes from -drive file=... and is passed around as a separate parameter.
The goal is to get rid of this parameter and use the options QDict more
consistently.
With this option you can access not only the top-level image, but
specify a filename for the backing file (currently only if no backing
file exists, but we'll allow overriding it later)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Options starting in "backing." are passed to the backing file now. If
you don't need to specify the filename for the backing file, you can add
it on the command line instead of in the image file:
$ qemu-nbd -t /tmp/test.img
$ qemu-img create -f qcow2 empty.qcow2 1G
$ qemu-system-x86_64 -drive file=empty.qcow2,backing.file.driver=nbd,\
backing.file.host=localhost
Note that this doesn't override the backing filename from the image. If
the image has one, this will fail because NBD doesn't want the options
and a filename at the same time.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Specifying the wrong driver could fail an assertion:
$ qemu-system-x86_64 -drive file.driver=qcow2,file=x
qemu-system-x86_64: block.c:721: bdrv_open_common: Assertion `file !=
((void *)0)' failed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Directly pass the QEMUIOVector on instead of linearising it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The wait_time variable is in seconds. Reflect this in a comment and use
NANOSECONDS_PER_SECOND instead of BLOCK_IO_SLICE_TIME * 10 (which
happens to have the right value).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The current slice is extended when an I/O request exceeds the limit.
There is no need to extend the slice every time we check a request.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is not necessary to adjust the slice time at runtime. We already
extend the current slice in order to carry over accounting into the next
slice. Changing the actual slice time value introduces oscillations.
The guest may experience large changes in throughput or IOPS from one
moment to the next when slice times are adjusted.
Reported-by: Benoît Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I/O throttling relies on bdrv_acct_done() which is called when a request
completes. This leaves a blind spot since we only charge for completed
requests, not submitted requests.
For example, if there is 1 operation remaining in this time slice the
guest could submit 3 operations and they will all be submitted
successfully since they don't actually get accounted for until they
complete.
Originally we probably thought this is okay since the requests will be
accounted when the time slice is extended. In practice it causes
fluctuations since the guest can exceed its I/O limit and it will be
punished for this later on.
Account for I/O upon submission so that I/O limits are enforced
properly.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-By: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_open_common() implements direct use of protocols by copying the
pre-opened BlockDriverStates to bs using bdrv_swap(). It did however
first set some fields in bs, which end up in file after the swap. When
bdrv_open() destroys file, it appears to be open, and because it isn't,
qemu could segfault while trying to close it.
Reorder the operations to return immediately in such cases so that file
is correctly detected as closed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
After this patch, using -drive with an empty file name continues to open
the file if driver-specific options are used. If no driver-specific
options are specified, the semantics stay as it was: It defines a drive
without an inserted medium.
In order to achieve this, bdrv_open() must be made safe to work with a
NULL filename parameter. The assumption that is made is that only block
drivers which implement bdrv_parse_filename() support using driver
specific options and could therefore work without a filename. These
drivers must make sure to cope with NULL in their implementation of
.bdrv_open() (this is only NBD for now). For all other drivers, the
block layer code will make sure to error out before calling into their
code - they can't possibly work without a filename.
Now an NBD connection can be opened like this:
qemu-system-x86_64 -drive file.driver=nbd,file.port=1234,file.host=::1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
bdrv_open() uses two different variables called options. Rename one of
them to avoid confusion and to allow the outer one to be accessed
everywhere.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a driver needs structured data and not just a string, it can provide
a .bdrv_parse_filename callback now that parses the command line string
into separate options. Keeping this separate from .bdrv_open_filename
ensures that the preferred way of directly specifying the options always
works as well if parsing the string works.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Specify -drive file.option=... on the command line to pass the option to
the protocol instead of the format driver.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
brdv_truncate() is also called from readv/writev commands on self-
growing file based storage. this will result in requests waiting
for theirselves to complete.
This reverts commit 9a665b2b86.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
realpath(3) is used to get an absolute path to the image file when
creating a -drive snapshot=on temporary qcow2. This does not work for
protocols since their filenames ("proto:foo:...") do not correspond to
file system paths.
Commit 7c96d46ec2 ("Let snapshot work with
protocols") skipped realpath(3) for protocols. Later on the "raw"
format was introduced and broke the check.
Use path_has_protocol(filename) to decide if this image uses a protocol
or a filename.
Reported-by: Richard Jones <rjones@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For now bdrv_get_aio_context() is just a stub that calls
qemu_aio_get_context() since the block layer is currently tied to the
main loop AioContext.
Add the stub now so that the block layer can begin accessing its
AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The options are passed down to the block drivers, which are supposed to
remove all options they have processed. Anything that is left over in
the end is an unknown option and results in an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It doesn't do anything yet except storing the options QDict in the
BlockDriverState.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
During a commit of 'all' using the HMP non-live commit, the operation
is aborted and returns error on the first error enountered. When
non-COW drives are in use (e.g. ejected floppy, cdrom, or drives without
a backing parent), that means a commit all will return an error of either
-ENOMEDIUM or -ENOTSUP. This is not desirable, so for the 'all' commit
case, only attempt the commit if both bs->drv and bs->backing_hd are
present.
More succinctly: 'commit all' now means a commit on all COW drives.
This means an individual commit to a specific non-COW drive will still
return the appropriate error (-ENOMEDIUM if eject / not present, -ENOTSUP
if no backing file).
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is better to present homogeneous hardware independent of the storage
technology that is chosen on the host, hence we make discard a host
parameter; the user can choose whether to pass it down to the image
format and protocol, or to ignore it.
Using DISCARD with filesystems can cause very severe fragmentation, so it
is left default-off for now. This can change later when we implement the
"anchor" operation for efficient management of preallocated files.
There is still one choice to make: whether DISCARD has an effect on the
dirty bitmap or not. I chose yes, though there is a disadvantage: if
the guest is buggy and issues discards for data that is in use, there
will be no way to migrate storage for that guest without downgrading
the machine type to an older one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_truncate() invalidates the bdrv_check_request() result for
in-flight requests, so there should better be none.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Reported-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There can be a need to turn output to stdout off. This patch adds a -q option
that enable "Quiet mode". In Quiet mode, only errors are printed out.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There's no synchronous wrapper for bdrv_co_is_allocated_above function
so it's not possible to check for sector allocation in an image with
a backing file.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In an image chain, if the base image is smaller than the current
image, we need to make sure to use the current images count of
unallocated blocks once we get to the end of the base image. Without
this change the code will return 0 blocks when it gets to the end
of the base image and mirror_run will fail its assertion.
Signed-off-by: Vishvananda Ishaya <vishvananda@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is needed in the following patch.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This actually uses the dirty bitmap in the block layer, and converts
mirroring to use an HBitmapIter.
Reviewed-by: Laszlo Ersek <lersek@redhat.com> (except block/mirror.c parts)
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Note that resetting bits in the dirty bitmap is done _before_ actually
processing the request. Writes, instead, set bits after the request
is completed.
This way, when there are concurrent write and discard requests, the
outcome will always be that the blocks are marked dirty. This scenario
should never happen, but it is safer to do it this way.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_io_limits_enable() starts a new slice, but does not set io_base
correctly for that slice.
Here is how io_base is used:
bytes_base = bs->nr_bytes[is_write] - bs->io_base.bytes[is_write];
bytes_res = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
if (bytes_base + bytes_res <= bytes_limit) {
/* no wait */
} else {
/* operation needs to be throttled */
}
As a result, any I/O operations that are triggered between now and
bs->slice_end are incorrectly limited. If 10 MB of data has been
written since the VM was started, QEMU thinks that 10 MB of data has
been written in this slice. This leads to a I/O lockup in the guest.
We fix this by delaying the start of a new slice to the next
call of bdrv_exceed_io_limits().
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The qiov_is_aligned() function checks whether a QEMUIOVector meets a
BlockDriverState's alignment requirements. This is needed by
virtio-blk-data-plane so:
1. Move the function from block/raw-posix.c to block/block.c.
2. Make it public in block/block.h.
3. Rename to bdrv_qiov_is_aligned().
4. Change return type from int to bool.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A blank CD or DVD is visible as a zero-sized disks. Probing such
disks will lead to an EIO and a failure to start the VM. Treating
them as raw is a better solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows removing of MinGW specific code and improves
reentrancy for POSIX hosts.
[Removed unused ret variable in qemu_get_timedate() to fix warning:
vl.c: In function ‘qemu_get_timedate’:
vl.c:451:16: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable]
-- Stefan Hajnoczi]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This makes the blkdebug suspend/resume functionality available in
qemu-io. Use it like this:
$ ./qemu-io blkdebug::/tmp/test.qcow2
qemu-io> break write_aio req_a
qemu-io> aio_write 0 4k
qemu-io> blkdebug: Suspended request 'req_a'
qemu-io> resume req_a
blkdebug: Resuming request 'req_a'
qemu-io> wrote 4096/4096 bytes at offset 0
4 KiB, 1 ops; 0:00:30.71 (133.359788 bytes/sec and 0.0326 ops/sec)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit adds an Error ** argument to bdrv_img_create() and set it
appropriately on error.
Callers of bdrv_img_create() pass NULL for the new argument and still
rely on bdrv_img_create()'s return value. Next commits will change
callers to use the Error object instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes problems that are caused by the additional open/close cycle
of the existing format probing, for example related to qemu-nbd without
-t option or file descriptor passing.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of waiting for all requests to complete, wait just for the
specific request that should be cancelled.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The local string tmp_filename is passed to function get_tmp_filename
which expects a string with minimum size MAX_PATH for w32 hosts.
MAX_PATH is 260 and PATH_MAX is 259, so tmp_filename was too short.
Commit eba25057b9 introduced this
regression.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that AIOPool no longer keeps a freelist, it isn't really a "pool"
anymore. Rename it to AIOCBInfo and make it const since it no longer
needs to be modified.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
AIO control blocks are frequently acquired and released because each aio
request involves at least one AIOCB. Therefore, we pool them to avoid
heap allocation overhead.
The problem with the freelist approach in AIOPool is thread-safety. If
we want BlockDriverStates to associate with AioContexts that execute in
multiple threads, then a global freelist becomes a problem.
This patch drops the freelist and instead uses g_slice_alloc() which is
tuned for per-thread fixed-size object pools. qemu_aio_get() and
qemu_aio_release() are now thread-safe.
Note that the change from g_malloc0() to g_slice_alloc() should be safe
since the freelist reuse case doesn't zero the AIOCB either.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony: (32 commits)
osdep: Less restrictive F_SEFL in qemu_dup_flags()
qemu-iotests: add testcases for mirroring on-source-error/on-target-error
qmp: add pull_event function
mirror: add support for on-source-error/on-target-error
iostatus: forward block_job_iostatus_reset to block job
qemu-iotests: add mirroring test case
mirror: implement completion
qmp: add drive-mirror command
mirror: introduce mirror job
block: introduce BLOCK_JOB_READY event
block: add block-job-complete
block: rename block_job_complete to block_job_completed
block: export dirty bitmap information in query-block
block: introduce new dirty bitmap functionality
block: add bdrv_open_backing_file
block: add bdrv_query_stats
block: add bdrv_query_info
qemu-config: Add new -add-fd command line option
monitor: Prevent removing fd from set during init
monitor: Enable adding an inherited fd to an fd set
...
Conflicts:
vl.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Assert that write_compressed is never used with the dirty bitmap.
Setting the bits early is wrong, because a coroutine might concurrently
examine them and copy incomplete data from the source.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Mirroring runs without the backing file so that it can be copied outside
QEMU. However, we need to add it at the time the job is completed and
QEMU switches to the target. Factor out the common bits of opening an
image and completing a mirroring operation.
The new function does not assume that the file is closed immediately after
it returns failure, so it keeps the BDRV_O_NO_BACKING flag up-to-date.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qmp_query_blockstat cannot have errors, remove the Error argument and
create a new public function bdrv_query_stats out of it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
