Commit Graph

917 Commits

Author SHA1 Message Date
John Millikin
c6e51f1bb2 esp: Handle CMD_BUSRESET by resetting the SCSI bus
Per investigation on the linked ticket, SunOS issues a SCSI bus reset
to the ESP as part of its boot sequence. If this ESP command doesn't
cause devices to assert sense flag UNIT ATTENTION, SunOS will consider
the CD-ROM device to be non-compliant with Common Command Set (CCS).
In this condition, the SunOS installer's early userspace doesn't set
the installation source location to sr0 and the miniroot copy fails.

Signed-off-by: John Millikin <john@john-millikin.com>
Suggested-by: Bill Paul <noisetube@gmail.com>
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1127
Message-Id: <20220817053846.699310-1-john@john-millikin.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-01 07:42:36 +02:00
Kevin Wolf
51e15194b0 scsi-generic: Fix emulated block limits VPD page
Commits 01ef8185b8 amd 24b36e9813 updated the way that the maximum
transfer length is calculated for patching block limits VPD page in an
INQUIRY response.

The same updates also need to be made for the case where the host device
does not support the block limits VPD page at all and we emulate the
whole page.

Without this fix, on host block devices a maximum transfer length of
(INT_MAX - sector_size) bytes is advertised to the guest, resulting in
I/O errors when a request that exceeds the host limits is made by the
guest. (Prior to commit 24b36e9813, this code path would use the
max_transfer value from the host instead of INT_MAX, but still miss the
fix from 01ef8185b8 where max_transfer is also capped to max_iov
host pages, so it would be less wrong, but still wrong.)

Cc: qemu-stable@nongnu.org
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2096251
Fixes: 01ef8185b8
Fixes: 24b36e9813
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20220822125320.48257-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-08-23 16:01:13 +02:00
Stefan Hajnoczi
9a4b6a63ae virtio-scsi: fix race in virtio_scsi_dataplane_start()
As soon as virtio_scsi_data_plane_start() attaches host notifiers the
IOThread may start virtqueue processing. There is a race between
IOThread virtqueue processing and virtio_scsi_data_plane_start() because
it only assigns s->dataplane_started after attaching host notifiers.

When a virtqueue handler function in the IOThread calls
virtio_scsi_defer_to_dataplane() it may see !s->dataplane_started and
attempt to start dataplane even though we're already in the IOThread:

  #0  0x00007f67b360857c __pthread_kill_implementation (libc.so.6 + 0xa257c)
  #1  0x00007f67b35bbd56 raise (libc.so.6 + 0x55d56)
  #2  0x00007f67b358e833 abort (libc.so.6 + 0x28833)
  #3  0x00007f67b358e75b __assert_fail_base.cold (libc.so.6 + 0x2875b)
  #4  0x00007f67b35b4cd6 __assert_fail (libc.so.6 + 0x4ecd6)
  #5  0x000055ca87fd411b memory_region_transaction_commit (qemu-kvm + 0x67511b)
  #6  0x000055ca87e17811 virtio_pci_ioeventfd_assign (qemu-kvm + 0x4b8811)
  #7  0x000055ca87e14836 virtio_bus_set_host_notifier (qemu-kvm + 0x4b5836)
  #8  0x000055ca87f8e14e virtio_scsi_set_host_notifier (qemu-kvm + 0x62f14e)
  #9  0x000055ca87f8dd62 virtio_scsi_dataplane_start (qemu-kvm + 0x62ed62)
  #10 0x000055ca87e14610 virtio_bus_start_ioeventfd (qemu-kvm + 0x4b5610)
  #11 0x000055ca87f8c29a virtio_scsi_handle_ctrl (qemu-kvm + 0x62d29a)
  #12 0x000055ca87fa5902 virtio_queue_host_notifier_read (qemu-kvm + 0x646902)
  #13 0x000055ca882c099e aio_dispatch_handler (qemu-kvm + 0x96199e)
  #14 0x000055ca882c1761 aio_poll (qemu-kvm + 0x962761)
  #15 0x000055ca880e1052 iothread_run (qemu-kvm + 0x782052)
  #16 0x000055ca882c562a qemu_thread_start (qemu-kvm + 0x96662a)

This patch assigns s->dataplane_started before attaching host notifiers
so that virtqueue handler functions that run in the IOThread before
virtio_scsi_data_plane_start() returns correctly identify that dataplane
does not need to be started. This fix is taken from the virtio-blk
dataplane code and it's worth adding a comment in virtio-blk as well to
explain why it works.

Note that s->dataplane_started does not need the AioContext lock because
it is set before attaching host notifiers and cleared after detaching
host notifiers. In other words, the IOThread always sees the value true
and the main loop thread does not modify it while the IOThread is
active.

Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2099541
Reported-by: Qing Wang <qinwang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220808162134.240405-1-stefanha@redhat.com>
Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-08-17 07:07:37 -04:00
Mark Cave-Ayland
55794c904d scsi-disk: ensure block size is non-zero and changes limited to bits 8-15
The existing code assumes that the block size can be generated from p[1] << 8
in multiple places which ignores the top and bottom 8 bits. If the block size
is allowed to be set to an arbitrary value then this causes a mismatch
between the value written by the guest in the block descriptor and the value
subsequently read back using READ CAPACITY causing the guest to generate
requests that can crash QEMU.

For now restrict block size changes to bits 8-15 and also ignore requests to
set the block size to 0 which causes the SCSI emulation to crash in at least
one place with a divide by zero error.

Fixes: 356c4c441e ("scsi-disk: allow MODE SELECT block descriptor to set the block size")
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1112
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-01 15:22:39 +02:00
Mark Cave-Ayland
54a53a006e scsi-disk: fix overflow when block size is not a multiple of BDRV_SECTOR_SIZE
In scsi_disk_emulate_write_same() the number of host sectors to transfer is
calculated as (s->qdev.blocksize / BDRV_SECTOR_SIZE) which is then used to
copy data in block size chunks to the iov buffer.

Since the loop copying the data to the iov buffer uses a fixed increment of
s->qdev.blocksize then using a block size that isn't a multiple of
BDRV_SECTOR_SIZE introduces a rounding error in the iov buffer size calculation
such that the iov buffer copy overflows the space allocated.

Update the iov buffer copy for() loop so that it will use the smallest of either
the current block size or the remaining transfer count to prevent the overflow.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220730122656.253448-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-08-01 15:22:39 +02:00
Mark Cave-Ayland
356c4c441e scsi-disk: allow MODE SELECT block descriptor to set the block size
The MODE SELECT command can contain an optional block descriptor that can be used
to set the device block size. If the block descriptor is present then update the
block size on the SCSI device accordingly.

This allows CDROMs to be used with A/UX which requires a CDROM drive which is
capable of switching from a 2048 byte sector size to a 512 byte sector size.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland
4536fba00a scsi-disk: allow the MODE_PAGE_R_W_ERROR AWRE bit to be changeable for CDROM drives
A/UX sends a MODE_PAGE_R_W_ERROR command with the AWRE bit set to 0 when enumerating
CDROM drives. Since the bit is currently hardcoded to 1 then indicate that the AWRE
bit can be changed (even though we don't care about the value) so that
the MODE_PAGE_R_W_ERROR page can be set successfully.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-12-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland
389e18eb9a scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk for Macintosh
When A/UX configures the CDROM device it sends a truncated MODE SELECT request
for page 1 (MODE_PAGE_R_W_ERROR) which is only 6 bytes in length rather than
10. This seems to be due to bug in Apple's code which calculates the CDB message
length incorrectly.

The work at [1] suggests that this truncated request is accepted on real
hardware whereas in QEMU it generates an INVALID_PARAM_LEN sense code which
causes A/UX to get stuck in a loop retrying the command in an attempt to succeed.

Alter the mode page request length check so that truncated requests are allowed
if the SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED quirk is enabled, whilst also adding a
trace event to enable the condition to be detected.

[1] https://68kmla.org/bb/index.php?threads/scsi2sd-project-anyone-interested.29040/page-7#post-316444

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland
6ab717610f scsi-disk: add FORMAT UNIT command
When initialising a drive ready to install MacOS, Apple HD SC Setup first attempts
to format the drive. Add a simple FORMAT UNIT command which simply returns success
to allow the format to succeed.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220622105314.802852-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland
09274de1f7 scsi-disk: add SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk for Macintosh
Both MacOS and A/UX make use of vendor-specific MODE SELECT commands with PF=0
to identify SCSI devices:

- MacOS sends a MODE SELECT command with PF=0 for the MODE_PAGE_VENDOR_SPECIFIC
  (0x0) mode page containing 2 bytes before initialising a disk

- A/UX (installed on disk) sends a MODE SELECT command with PF=0 during SCSI
  bus enumeration, and gets stuck in an infinite loop if it fails

Add a new SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE quirk to allow both
PF=0 MODE SELECT commands and implement a MODE_PAGE_VENDOR_SPECIFIC (0x0)
mode page which is compatible with MacOS.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:58 +02:00
Mark Cave-Ayland
f43c2b94cd scsi-disk: add SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk for Macintosh
During SCSI bus enumeration A/UX sends a MODE SENSE command to the CDROM with
the DBD bit unset and expects the response to include a block descriptor. As per
the latest SCSI documentation, QEMU currently force-disables the block
descriptor for CDROM devices but the A/UX driver expects the requested block
descriptor to be returned.

If the block descriptor is not returned in the response then A/UX becomes
confused, since the block descriptor returned in the MODE SENSE response is
used to generate a subsequent MODE SELECT command which is then invalid.

Add a new SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD quirk to allow this behaviour
to be enabled as required. Note that an additional workaround is required for
the previous SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk which must never
return a block descriptor even though the DBD bit is left unset.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20220622105314.802852-5-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:57 +02:00
Mark Cave-Ayland
09d3786762 scsi-disk: add MODE_PAGE_APPLE_VENDOR quirk for Macintosh
One of the mechanisms MacOS uses to identify CDROM drives compatible with MacOS
is to send a custom MODE SELECT command for page 0x30 to the drive. The
response to this is a hard-coded manufacturer string which must match in order
for the CDROM to be usable within MacOS.

Add an implementation of the MODE SELECT page 0x30 response guarded by a newly
defined SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR quirk bit so that CDROM drives
attached to non-Apple machines function exactly as before.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-3-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:57 +02:00
Mark Cave-Ayland
3412f9c3b4 scsi-disk: add new quirks bitmap to SCSIDiskState
Since the MacOS SCSI implementation is quite old (and Apple added some firmware
customisations to their drives for m68k Macs) there is need to add a mechanism
to correctly handle Apple-specific quirks.

Add a new quirks bitmap to SCSIDiskState that can be used to enable these
features as required.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220622105314.802852-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:57 +02:00
Mauro Matteo Cascella
4367a20cc4 scsi/lsi53c895a: really fix use-after-free in lsi_do_msgout (CVE-2022-0216)
Set current_req to NULL, not current_req->req, to prevent reusing a free'd
buffer in case of repeated SCSI cancel requests.  Also apply the fix to
CLEAR QUEUE and BUS DEVICE RESET messages as well, since they also cancel
the request.

Thanks to Alexander Bulekov for providing a reproducer.

Fixes: CVE-2022-0216
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20220711123316.421279-1-mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-13 16:58:57 +02:00
Mauro Matteo Cascella
6c8fa961da scsi/lsi53c895a: fix use-after-free in lsi_do_msgout (CVE-2022-0216)
Set current_req->req to NULL to prevent reusing a free'd buffer in case of
repeated SCSI cancel requests. Thanks to Thomas Huth for suggesting the patch.

Fixes: CVE-2022-0216
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/972
Signed-off-by: Mauro Matteo Cascella <mcascell@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220705200543.2366809-1-mcascell@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-07-06 09:31:15 +02:00
Dr. David Alan Gilbert
118d4ed045 Trivial: 3 char repeat typos
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-06-28 11:06:02 +02:00
Stefan Hajnoczi
1ab5096b3a block: get rid of blk->guest_block_size
Commit 1b7fd72955 ("block: rename buffer_alignment to
guest_block_size") noted:

  At this point, the field is set by the device emulation, but completely
  ignored by the block layer.

The last time the value of buffer_alignment/guest_block_size was
actually used was before commit 339064d506 ("block: Don't use guest
sector size for qemu_blockalign()").

This value has not been used since 2013. Get rid of it.

Cc: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220518130945.2657905-1-stefanha@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Faria <afaria@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2022-06-24 17:07:06 +02:00
Richard Henderson
30796f5567 virtio,pc,pci: fixes,cleanups,features
more CXL patches
 VIOT
 Igor's huge AML rework
 fixes, cleanups all over the place
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
 YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
 QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
 oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
 sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
 =LXG0
 -----END PGP SIGNATURE-----

Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging

virtio,pc,pci: fixes,cleanups,features

more CXL patches
VIOT
Igor's huge AML rework
fixes, cleanups all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKj4YcPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpkNcIAKTsMfUVueTjelC2RwIdegQkypycKhCweKzc
# QxddaEr0w+N2164byT3IUy9h53hV3qAAmMuGE4d8B2r5rykf+SwDfIeNmHNqntnA
# oLraXIxSSAf4/1cTsRCVL/BXo2E9P+WHI3huw37HClmPLdyMjQa1AtpTpKnIsbmO
# sBZf7t5yHDJ2WGZwBQ1IbAxvsdGo1fa1TCt1jZ9g1dmnQSTteQG8DHkGoRnkwTi7
# 510jb0e8uQEgKytCdLTHqESHlfgjvoI73OFOAR2dzTKy6KelFmdLYSo2FtsIdtT5
# 1fZNaDjtl6zQ4b2iLBgPpHtikKch9BzzhDMbCsq7FpvasZ8u2FE=
# =LXG0
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 10 Jun 2022 05:27:51 PM PDT
# gpg:                using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg:                issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
  hw/vhost-user-scsi|blk: set `supports_config` flag correctly
  hw/virtio/vhost-user: don't use uninitialized variable
  tests/acpi: virt: update golden masters for VIOT
  hw/acpi/viot: sort VIOT ACPI table entries by PCI host bridge min_bus
  tests/acpi: virt: allow VIOT acpi table changes
  hw/acpi/viot: build array of PCI host bridges before generating VIOT ACPI table
  hw/acpi/viot: move the individual PCI host bridge entry generation to a new function
  hw/acpi/viot: rename build_pci_range_node() to enumerate_pci_host_bridges()
  hw/cxl: Fix missing write mask for HDM decoder target list registers
  pci: fix overflow in snprintf string formatting
  hw/machine: Drop cxl_supported flag as no longer useful
  hw/cxl: Move the CXLState from MachineState to machine type specific state.
  tests/acpi: Update q35/CEDT.cxl for new memory addresses.
  pci/pci_expander_bridge: For CXL HB delay the HB register memory region setup.
  tests/acpi: Allow modification of q35 CXL CEDT table.
  hw/cxl: Push linking of CXL targets into i386/pc rather than in machine.c
  hw/acpi/cxl: Pass in the CXLState directly rather than MachineState
  hw/cxl: Make the CXL fixed memory window setup a machine parameter.
  x86: acpi-build: do not include hw/isa/isa.h directly
  tests: acpi: update expected DSDT.tis.tpm2/DSDT.tis.tpm12 blobs
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-06-10 18:15:34 -07:00
Changpeng Liu
06cb5c82eb hw/vhost-user-scsi|blk: set supports_config flag correctly
Currently vhost-user-scsi driver doesn't allow to change
the configuration space of virtio_scsi, while vhost-user-blk
support that, so here we set the flag in vhost-user-blk driver
and unset it in vhost-user-scsi.

Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Message-Id: <20220525125540.50979-2-changpeng.liu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
2022-06-09 19:32:49 -04:00
Peter Maydell
9323e79f10 Fix 'writeable' typos
We have about 30 instances of the typo/variant spelling 'writeable',
and over 500 of the more common 'writable'.  Standardize on the
latter.

Change produced with:

  sed -i -e 's/\([Ww][Rr][Ii][Tt]\)[Ee]\([Aa][Bb][Ll][Ee]\)/\1\2/g' $(git grep -il writeable)

and then hand-undoing the instance in linux-headers/linux/kvm.h.

Most of these changes are in comments or documentation; the
exceptions are:
 * a local variable in accel/hvf/hvf-accel-ops.c
 * a local variable in accel/kvm/kvm-all.c
 * the PMCR_WRITABLE_MASK macro in target/arm/internals.h
 * the EPT_VIOLATION_GPA_WRITABLE macro in target/i386/hvf/vmcs.h
   (which is never used anywhere)
 * the AR_TYPE_WRITABLE_MASK macro in target/i386/hvf/vmx.h
   (which is never used anywhere)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 20220505095015.2714666-1-peter.maydell@linaro.org
2022-06-08 19:38:47 +01:00
Jonah Palmer
c255488d67 virtio: add vhost support for virtio devices
This patch adds a get_vhost() callback function for VirtIODevices that
returns the device's corresponding vhost_dev structure, if the vhost
device is running. This patch also adds a vhost_started flag for
VirtIODevices.

Previously, a VirtIODevice wouldn't be able to tell if its corresponding
vhost device was active or not.

Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-3-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Jonah Palmer
3857cd5c7f virtio: drop name parameter for virtio_init()
This patch drops the name parameter for the virtio_init function.

The pair between the numeric device ID and the string device ID
(name) of a virtio device already exists, but not in a way that
lets us map between them.

This patch lets us do this and removes the need for the name
parameter in the virtio_init function.

Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <1648819405-25696-2-git-send-email-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Alex Bennée
56534930b5 hw/virtio/vhost-user: don't suppress F_CONFIG when supported
Previously we would silently suppress VHOST_USER_PROTOCOL_F_CONFIG
during the protocol negotiation if the QEMU stub hadn't implemented
the vhost_dev_config_notifier. However this isn't the only way we can
handle config messages, the existing vdc->get/set_config can do this
as well.

Lightly re-factor the code to check for both potential methods and
instead of silently squashing the feature error out. It is unlikely
that a vhost-user backend expecting to handle CONFIG messages will
behave correctly if they never get sent.

Fixes: 1c3e5a2617 ("vhost-user: back SET/GET_CONFIG requests with a protocol feature")
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>

Message-Id: <20220321153037.3622127-13-alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-16 04:38:40 -04:00
Stefan Hajnoczi
3dc584abee virtio-scsi: move request-related items from .h to .c
There is no longer a need to expose the request and related APIs in
virtio-scsi.h since there are no callers outside virtio-scsi.c.

Note the block comment in VirtIOSCSIReq has been adjusted to meet the
coding style.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
ad482b57ef virtio-scsi: clean up virtio_scsi_handle_cmd_vq()
virtio_scsi_handle_cmd_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-6-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
73b3b49f18 virtio-scsi: clean up virtio_scsi_handle_ctrl_vq()
virtio_scsi_handle_ctrl_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
37ce2de951 virtio-scsi: clean up virtio_scsi_handle_event_vq()
virtio_scsi_handle_event_vq() is only called from hw/scsi/virtio-scsi.c
now and its return value is no longer used. Remove the function
prototype from virtio-scsi.h and drop the return value.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-4-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
38738f7dbb virtio-scsi: don't waste CPU polling the event virtqueue
The virtio-scsi event virtqueue is not emptied by its handler function.
This is typical for rx virtqueues where the device uses buffers when
some event occurs (e.g. a packet is received, an error condition
happens, etc).

Polling non-empty virtqueues wastes CPU cycles. We are not waiting for
new buffers to become available, we are waiting for an event to occur,
so it's a misuse of CPU resources to poll for buffers.

Introduce the new virtio_queue_aio_attach_host_notifier_no_poll() API,
which is identical to virtio_queue_aio_attach_host_notifier() except
that it does not poll the virtqueue.

Before this patch the following command-line consumed 100% CPU in the
IOThread polling and calling virtio_scsi_handle_event():

  $ qemu-system-x86_64 -M accel=kvm -m 1G -cpu host \
      --object iothread,id=iothread0 \
      --device virtio-scsi-pci,iothread=iothread0 \
      --blockdev file,filename=test.img,aio=native,cache.direct=on,node-name=drive0 \
      --device scsi-hd,drive=drive0

After this patch CPU is no longer wasted.

Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20220427143541.119567-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:45:04 +01:00
Stefan Hajnoczi
2f743ef636 virtio-scsi: fix ctrl and event handler functions in dataplane mode
Commit f34e8d8b8d ("virtio-scsi: prepare
virtio_scsi_handle_cmd for dataplane") prepared the virtio-scsi cmd
virtqueue handler function to be used in both the dataplane and
non-datpalane code paths.

It failed to convert the ctrl and event virtqueue handler functions,
which are not designed to be called from the dataplane code path but
will be since the ioeventfd is set up for those virtqueues when
dataplane starts.

Convert the ctrl and event virtqueue handler functions now so they
operate correctly when called from the dataplane code path. Avoid code
duplication by extracting this code into a helper function.

Fixes: f34e8d8b8d ("virtio-scsi: prepare virtio_scsi_handle_cmd for dataplane")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20220427143541.119567-2-stefanha@redhat.com
[Fixed s/by used/be used/ typo pointed out by Michael Tokarev
<mjt@tls.msk.ru>.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-05-09 10:44:26 +01:00
Paolo Bonzini
d13b200253 build: move vhost-scsi configuration to Kconfig
vhost-scsi and vhost-user-scsi are two devices of their own; it should
be possible to enable/disable them with --without-default-devices, not
--without-default-features.  Compute their default value in Kconfig to
obtain the more intuitive behavior.

Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-07 07:46:58 +02:00
Marc-André Lureau
8e3b0cbb72 Replace qemu_real_host_page variables with inlined functions
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.

This avoids the need for a constructor initialization too.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-06 10:50:38 +02:00
Philippe Mathieu-Daudé
2539eade4f hw: Fix misleading hexadecimal format
"0x%u" format is very misleading, replace by "0x%x".

Found running:

  $ git grep -E '0x%[0-9]*([lL]*|" ?PRI)[dDuU]' hw/

Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220323114718.58714-3-philippe.mathieu.daude@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-03-24 10:38:42 +00:00
Mark Cave-Ayland
a7a2208862 esp: recreate ESPState current_req after migration
Since PDMA reads/writes are driven by the guest, it is possible that migration
can occur whilst a SCSIRequest is still active. Fortunately active SCSIRequests
are already included in the migration stream and restarted post migration but
this still leaves the reference in ESPState uninitialised.

Implement the SCSIBusInfo .load_request callback to obtain a reference to the
currently active SCSIRequest and use it to recreate ESPState current_req
after migration.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-09 09:29:10 +00:00
Mark Cave-Ayland
eda59b392d esp: include the current PDMA callback in the migration stream
This involves (re)adding a PDMA-specific subsection to hold the reference to the
current PDMA callback.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-10-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-09 09:29:10 +00:00
Mark Cave-Ayland
77987ef5a3 esp: convert ESPState pdma_cb from a function pointer to an integer
This prepares for the inclusion of the current PDMA callback in the migration
stream since the callback is referenced by an integer instead of a function
pointer.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-9-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-09 09:29:10 +00:00
Mark Cave-Ayland
d0243b094b esp: introduce esp_pdma_cb() function
This function is to be used to execute the current PDMA callback rather than
dereferencing the ESPState pdma_cb function pointer directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-09 09:29:10 +00:00
Mark Cave-Ayland
1e794c51c4 esp: introduce esp_set_pdma_cb() function
This function is to be used to set the current PDMA callback rather than
accessing the ESPState pdma_cb function pointer directly.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20220305155530.9265-7-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2022-03-09 09:29:10 +00:00
Peter Maydell
5df022cf2e osdep: Move memalign-related functions to their own header
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
2022-03-07 13:16:49 +00:00
Peter Maydell
15e09912b7 include: Move hardware version declarations to new qemu/hw-version.h
The "hardware version" machinery (qemu_set_hw_version(),
qemu_hw_version(), and the QEMU_HW_VERSION define) is used by fewer
than 10 files.  Move it out from osdep.h into a new
qemu/hw-version.h.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-6-peter.maydell@linaro.org
2022-02-21 13:30:20 +00:00
Bernhard Beschow
5e78c98b7c Mark remaining global TypeInfo instances as const
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.

This commit was created with:
  git grep -z -l 'static TypeInfo' -- '*.c' | \
  xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-02-21 13:30:20 +00:00
Peter Maydell
d90e6f665d Migration Pull request (Take 2)
Hi
 
 This time I have disabled vmstate canary patches form Dave Gilbert.
 
 Let's see if it works.
 
 Later, Juan.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmH0NkEACgkQ9IfvGFhy
 1yM4VQ/+MML5ugA9XA5hOFV+Stwv2ENtMR4r4raQsC7UKdKMaCNuoj1BdlXMRaki
 E2TpoHYq99rfJX+AA0XihxHh84I1l9fpoiXrcr8pgNmhcj0qkBykY9Elzf95woMM
 UMyinL2jhHfHjby29AaE7BDelUZIA0BgyzQ3TMq8rO+l/ZqFYA8U1SEgPlDYj7cn
 gkDWFkPJx6IKgcI8M1obHw11azHgS7dmjjl9lXzxJ2/WfXnoZCuU0BtHd6a1rnAS
 qcO3gwLfCo+3aTGKRseJie1Cljz6sIP+ke0Xgn5O+e7alWjCOtlVZrWwd2MqQ07K
 2bf7uuTC2KQicLLH8DCnoH/BSvHmpyl/FglFrETRk/55KKg0bi+ZltXaTs9bC2uO
 jzNbBSRf8UMcX6Bp3ukhPaFQ1vxqP7KxN9bM+7LYP9aX7Lt/NCJciYjw1jCTwcwi
 nz0RS4d7cscMhoMEarPCKcaNJR6PJetdZY2VXavWjXv6er3407yTocvuei0Epdyb
 WZtbFnpI2tfx1GEr/Bz6Mnk/qn7kwo7BFEUtJoweFE05g5wHa1PojsblrrsqeOuc
 llpK8o8c8NFACxeiLa0z0VBkTjdOtao206eLhF+Se3ukubImayRQwZiOCEBBXwB3
 +LmVcmwNDfNonSWI04AA2WAy9gAdM3Ko/gBfWsuOPR5oIs65wns=
 =F/ek
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/quintela-gitlab/tags/migration-20220128-pull-request' into staging

Migration Pull request (Take 2)

Hi

This time I have disabled vmstate canary patches form Dave Gilbert.

Let's see if it works.

Later, Juan.

# gpg: Signature made Fri 28 Jan 2022 18:30:25 GMT
# gpg:                using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg:                 aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/quintela-gitlab/tags/migration-20220128-pull-request: (36 commits)
  migration: Move temp page setup and cleanup into separate functions
  migration: Simplify unqueue_page()
  migration: Add postcopy_has_request()
  migration: Enable UFFD_FEATURE_THREAD_ID even without blocktime feat
  migration: No off-by-one for pss->page update in host page size
  migration: Tally pre-copy, downtime and post-copy bytes independently
  migration: Introduce ram_transferred_add()
  migration: Don't return for postcopy_send_discard_bm_ram()
  migration: Drop return code for disgard ram process
  migration: Do chunk page in postcopy_each_ram_send_discard()
  migration: Drop postcopy_chunk_hostpages()
  migration: Don't return for postcopy_chunk_hostpages()
  migration: Drop dead code of ram_debug_dump_bitmap()
  migration/ram: clean up unused comment.
  migration: Report the error returned when save_live_iterate fails
  migration/migration.c: Remove the MIGRATION_STATUS_ACTIVE when migration finished
  migration/migration.c: Avoid COLO boot in postcopy migration
  migration/migration.c: Add missed default error handler for migration state
  Remove unnecessary minimum_version_id_old fields
  multifd: Rename pages_used to normal_pages
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-29 15:55:54 +00:00
Peter Maydell
17e3134061 Remove unnecessary minimum_version_id_old fields
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL.  (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)

We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.

Commit created with:
  sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>

Signed-off-by: Juan Quintela <quintela@redhat.com>

---

It missed vmstate_ppc_cpu.
2022-01-28 15:38:23 +01:00
Peter Maydell
2f93d8b04a rtc: Move RTC function prototypes to their own header
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff().  Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them.  Move them to their
own header, a new include/sysemu/rtc.h.

Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.

The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-01-28 14:29:46 +00:00
Peter Maydell
dea52c223b trivial patches pull request 20220118
Fix comments and typos
 Add vmstate for ETRAX timers
 Use ldst in megasas
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmHmslQSHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748Q3wQAJ05K2z2dxGbK/25gMiZxT7CajTLKIz6
 nuHDz7GRFCNPsKZJbwOkBqVX+S6cDk9Du6zzUmD7lP9RDyAi8yqy2Au8oEyMmpWC
 hGRY8TUJRoyc33c4ND2SfmyIYQF5Hl477C05o+YnQogjqVN1RfXvukuRl97LxsCr
 9VP2Z1n5ykfb/CAUt52P2oXDCgPohw9EA3lPgKz1b/qBmgYbvnhlMzNmw9nOJkNb
 2WtIBDzWORcRCjIMbfkEJOuAVMKGXor8fw1qfFCMF9UggHDT+BYhScKp1hL1LNcp
 qe5X3+FvlU4hR0c3WID/3xVrnkHYRa/BurpdG1O+4tku8DlItX2GgpQyhFheLTV+
 JGl2yRY2j/8VBq50DhqUxH9NTMQ1nhVeVbQRxCXhGT4qrFwRxa421IwA+EXh4ALw
 k25kHsOGcOheR+pz489ZIfqBYlNnOjxLmp4gJKWuIWKStBbzpUjgJ0QRHcGyFcHy
 +tb4sJsGa8O1EcjrnIsVEwrQnupY7M26UqOghsYwMNkj8pXFQC8EkDPzkxZM5MlZ
 Zf5JGnMw8nBqvNwmagY+YNbOAXwxS0vDQUbBsEjjCuBCq6XeThPnfc/G/8dTsB6Y
 hYZBtOSdGBVRof3+VXDYRg9uLRgfmD26Cxg5l9qz2GqjLE9QMCb+Yuy07E4lISD7
 AzqUKof59Cdt
 =0iuX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request' into staging

trivial patches pull request 20220118

Fix comments and typos
Add vmstate for ETRAX timers
Use ldst in megasas

# gpg: Signature made Tue 18 Jan 2022 12:28:04 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/lvivier-gitlab/tags/trivial-branch-for-7.0-pull-request:
  linux-user: Remove MAX_SIGQUEUE_SIZE
  linux-user: Return void from queue_signal()
  linux-user: Rename user_force_sig tracepoint to match function name
  linux-user: Fix comment typo in arm cpu_loop code
  softmmu: Provide a clue as to why device tree loading failed
  tests: Fix typo in check-help output
  qdev-core.h: Fix wrongly named reference to TYPE_SPLIT_IRQ
  hw/scsi/megasas: Simplify using the ldst API
  hw/timer/etraxfs_timer: Add vmstate for ETRAX timers

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2022-01-18 22:27:13 +00:00
Philippe Mathieu-Daudé
f02b664aad hw/dma: Let dma_buf_read() / dma_buf_write() propagate MemTxResult
Since commit 292e13142d, dma_buf_rw() returns a MemTxResult type.
Do not discard it, return it to the caller. Pass the previously
returned value (the QEMUSGList residual size, which was rarely used)
as an optional argument.

With this new API, SCSIRequest::residual might now be accessed via
a pointer. Since the size_t type does not have the same size on
32 and 64-bit host architectures, convert it to a uint64_t, which
is big enough to hold the residual size, and the type is constant
on both 32/64-bit hosts.

Update the few dma_buf_read() / dma_buf_write() callers to the new
API.

Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220117125130.131828-1-f4bug@amsat.org>
2022-01-18 12:56:29 +01:00
Philippe Mathieu-Daudé
bfa30f3903 hw/dma: Use dma_addr_t type definition when relevant
Update the obvious places where dma_addr_t should be used
(instead of uint64_t, hwaddr, size_t, int32_t types).

This allows to have &dma_addr_t type portable on 32/64-bit
hosts.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220111184309.28637-11-f4bug@amsat.org>
2022-01-18 12:56:29 +01:00
Philippe Mathieu-Daudé
5f412602de hw/scsi: Rename SCSIRequest::resid as 'residual'
The 'resid' field is slightly confusing and could be
interpreted as some ID. Rename it as 'residual' which
is clearer to review. No logical change.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220111184309.28637-8-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2022-01-18 12:56:29 +01:00
Philippe Mathieu-Daudé
2a0c513669 hw/scsi/megasas: Simplify using the ldst API
This code is easier to review using the load/store API.

Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20211218111912.1499377-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-01-18 12:32:16 +01:00
Stefan Hajnoczi
db608fb784 virtio: unify dataplane and non-dataplane ->handle_output()
Now that virtio-blk and virtio-scsi are ready, get rid of
the handle_aio_output() callback. It's no longer needed.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-7-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-01-12 17:09:39 +00:00
Stefan Hajnoczi
f34e8d8b8d virtio-scsi: prepare virtio_scsi_handle_cmd for dataplane
Prepare virtio_scsi_handle_cmd() to be used by both dataplane and
non-dataplane by making the condition for starting ioeventfd more
specific. This way it won't trigger when dataplane has already been
started.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20211207132336.36627-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-01-12 17:09:39 +00:00