In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We'll need some connection parameters to be available all the time to
implement nbd reconnect. So, let's refactor them: define additional
parameters in BDRVNBDState, drop them from function parameters, drop
nbd_client_init and separate options parsing instead from nbd_open.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190618114328.55249-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Drop useless 'if' before object_unref]
Signed-off-by: Eric Blake <eblake@redhat.com>
Reconnect will be implemented in the following commit, so for now,
in semantics below, disconnect itself is a "serious error".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-5-vsementsov@virtuozzo.com>
[eblake: slipped from 4.1 to 4.2]
Signed-off-by: Eric Blake <eblake@redhat.com>
To implement reconnect we need several states for the client:
CONNECTED, QUIT and two different CONNECTING states. CONNECTING states
will be added in the following patches. This patch implements CONNECTED
and QUIT.
QUIT means, that we should close the connection and fail all current
and further requests (like old quit = true).
CONNECTED means that connection is ok, we can send requests (like old
quit = false).
For receiving loop we use a comparison of the current state with QUIT,
because reconnect will be in the same loop, so it should be looping
until the end.
Opposite, for requests we use a comparison of the current state with
CONNECTED, as we don't want to send requests in future CONNECTING
states.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
No reason to use blocking channel for negotiation and we'll benefit in
further reconnect feature, as qio_channel reads and writes will do
qemu_coroutine_yield while waiting for io completion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
nbd_client_connect is going to be used from connection_co, so, let's
refactor nbd_client_connect in advance, leaving io channel
configuration all in nbd_client_connect.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We've had two separate reports of different callers running into use
of uninitialized data if s->quit is set (one detected by gcc -O3,
another by valgrind), due to checking 'nbd_reply_is_simple(reply) ||
s->quit' in the wrong order. Rather than chasing down which callers
need to pre-initialize reply, and whether there are any other
uninitialized uses, it's easier to guarantee that reply will always be
set by nbd_co_receive_one_chunk() even on failure.
The uninitialized use happens to be harmless (the only time the
variable is uninitialized is if s->quit is set, so the conditional
results in the same action regardless of what was read from reply),
and was introduced in commit 65e01d47.
In fixing the problem, it can also be seen that all (one) callers pass
in a non-NULL reply, so there is a dead conditional to also be cleaned
up.
Reported-by: Thomas Huth <thuth@redhat.com>
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190719172001.19770-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No reason to keep it separate, it differs from others block driver
behavior and therefore confuses. Instead of generic
'state = (State*)bs->opaque' we have to use special helper.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
No reason for keeping driver handlers realization separate from driver
structure. We can get rid of extra header file.
While being here, fix comments style, restore forgotten comments for
NBD_FOREACH_REPLY_CHUNK and nbd_reply_chunk_iter_receive, remove extra
includes.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190611102720.86114-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We have a latent bug in our NBD client code, tickled by the brand new
nbdkit 1.11.10 block status support:
$ nbdkit --filter=log --filter=truncate -U - \
data data="1" size=511 truncate=64K logfile=/dev/stdout \
--run 'qemu-img convert $nbd /var/tmp/out'
...
qemu-img: block/io.c:2122: bdrv_co_block_status: Assertion `*pnum && QEMU_IS_ALIGNED(*pnum, align) && align > offset - aligned_offset' failed.
The culprit? Our implementation of .bdrv_co_block_status can return
unaligned block status for any server that operates with a lower
actual alignment than what we tell the block layer in
request_alignment, in violation of the block layer's constraints. To
date, we've been unable to trip the bug, because qemu as NBD server
always advertises block sizing (at which point it is a server bug if
the server sends unaligned status - although qemu 3.1 is such a server
and I've sent separate patches for 4.0 both to get the server to obey
the spec, and to let the client to tolerate server oddities at EOF).
But nbdkit does not (yet) advertise block sizing, and therefore is not
in violation of the spec for returning block status at whatever
boundaries it wants, and those unaligned results can occur anywhere
rather than just at EOF. While we are still wise to avoid sending
sub-sector read/write requests to a server of unknown origin, we MUST
consider that a server telling us block status without an advertised
block size is correct. So, we either have to munge unaligned answers
from the server into aligned ones that we hand back to the block
layer, or we have to tell the block layer about a smaller alignment.
Similarly, if the server advertises an image size that is not
sector-aligned, we might as well assume that the server intends to let
us access those tail bytes, and therefore supports a minimum block
size of 1, regardless of whether the server supports block status
(although we still need more patches to fix the problem that with an
unaligned image, we can send read or block status requests that exceed
EOF to the server). Again, qemu as server cannot trip this problem
(because it rounds images to sector alignment), but nbdkit advertised
unaligned size even before it gained block status support.
Solve both alignment problems at once by using better heuristics on
what alignment to report to the block layer when the server did not
give us something to work with. Note that very few NBD servers
implement block status (to date, only qemu and nbdkit are known to do
so); and as the NBD spec mentioned block sizing constraints prior to
documenting block status, it can be assumed that any future
implementations of block status are aware that they must advertise
block size if they want a minimum size other than 1.
We've had a long history of struggles with picking the right alignment
to use in the block layer, as evidenced by the commit message of
fd8d372d (v2.12) that introduced the current choice of forced 512-byte
alignment.
There is no iotest coverage for this fix, because qemu can't provoke
it, and I didn't want to make test 241 dependent on nbdkit.
Fixes: fd8d372d
Reported-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190329042750.14704-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Currently, BlockDriver.bdrv_refresh_filename() is supposed to both
refresh the filename (BDS.exact_filename) and set BDS.full_open_options.
Now that we have generic code in the central bdrv_refresh_filename() for
creating BDS.full_open_options, we can drop the latter part from all
BlockDriver.bdrv_refresh_filename() implementations.
This also means that we can drop all of the existing default code for
this from the global bdrv_refresh_filename() itself.
Furthermore, we now have to call BlockDriver.bdrv_refresh_filename()
after having set BDS.full_open_options, because the block driver's
implementation should now be allowed to depend on BDS.full_open_options
being set correctly.
Finally, with this patch we can drop the @options parameter from
BlockDriver.bdrv_refresh_filename(); also, add a comment on this
function's purpose in block/block_int.h while touching its interface.
This completely obsoletes blklogwrite's implementation of
.bdrv_refresh_filename().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190201192935.18394-25-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This new field can be set by block drivers to list the runtime options
they accept that may influence the contents of the respective BDS. As of
a follow-up patch, this list will be used by the common
bdrv_refresh_filename() implementation to decide which options to put
into BDS.full_open_options (and consequently whether a JSON filename has
to be created), thus freeing the drivers of having to implement that
logic themselves.
Additionally, this patch adds the field to all of the block drivers that
need it and sets it accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190201192935.18394-22-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The generic bdrv_dirname() implementation would be able to generate some
form of directory name for many NBD nodes, but it would be always wrong.
Therefore, we have to explicitly make it an error (until NBD has some
form of specification for export paths, if it ever will).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190201192935.18394-18-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Keep all connection code in one file, to be able to implement reconnect
in further patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190201130138.94525-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: format tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
qstring_from_substr() takes the index of the substring's first and
last character. qstring_from_substr(s, 0, SIZE_MAX) denotes an empty
substring. Awkward.
Shift the end index one to the right. This simplifies both
qstring_from_substr() and its callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180727062204.10401-3-armbru@redhat.com>
In order to test that the NBD server is properly advertising
dirty bitmaps, we need a bare minimum client that can request
and read the context. Since feature freeze for 3.0 is imminent,
this is the smallest workable patch, which replaces the qemu
block status report with the results of the NBD server's dirty
bitmap (making it very easy to use 'qemu-img map --output=json'
to learn where the dirty portions are). Note that the NBD
protocol defines a dirty section with the same bit but opposite
sense that normal "base:allocation" uses to report an allocated
section; so in qemu-img map output, "data":true corresponds to
clean, "data":false corresponds to dirty.
A more complete solution that allows dirty bitmaps to be queried
at the same time as normal block status will be required before
this addition can lose the x- prefix. Until then, the fact that
this replaces normal status with dirty status means actions
like 'qemu-img convert' will likely misbehave due to treating
dirty regions of the file as if they are unallocated.
The next patch adds an iotest to exercise this new code.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180702191458.28741-2-eblake@redhat.com>
The previous commit fixed -blockdev breakage due to misuse of the
qobject input visitor's keyval flavor in bdrv_file_open(). The commit
message explain why using the plain flavor would be just as wrong; it
would break -drive. Turns out we break it in three places:
nbd_open(), sd_open() and ssh_file_open(). They are even marked
FIXME. Example breakage:
$ qemu-system-x86 -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off
qemu-system-x86: -drive node-name=n1,driver=nbd,server.type=inet,server.host=localhost,server.port=1234,server.numeric=off: Invalid parameter type for 'numeric', expected: boolean
Fix it the same way: replace qdict_crumple() by
qdict_crumple_for_keyval_qiv(), and switch from plain to the keyval
flavor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are numerous QDict functions that have been introduced for and are
used only by the block layer. Move their declarations into an own
header file to reflect that.
While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them. Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Minimal realization: only one extent in server answer is supported.
Flag NBD_CMD_FLAG_REQ_ONE is used to force this behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20180312152126.286890-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks, fix min_block check and 32-bit cap, use -1
instead of errno on failure in nbd_negotiate_simple_meta_context,
ensure that block status makes progress on success]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 79ba8c98 (v2.7) changed the setting of request_alignment
to occur only during bdrv_refresh_limits(), rather than at at
bdrv_open() time; but at the time, NBD was unaffected, because
it still used sector-based callbacks, so the block layer
defaulted NBD to use 512 request_alignment.
Later, commit 70c4fb26 (also v2.7) changed NBD to use byte-based
callbacks, without setting request_alignment. This resulted in
NBD using request_alignment of 1, which works great when the
server supports it (as is the case for qemu-nbd), but falls apart
miserably if the server requires alignment (but only if qemu
actually sends a sub-sector request; qemu-io can do it, but
most qemu operations still perform on sectors or larger).
Even later, the NBD protocol was updated to document that clients
should learn the server's minimum alignment during NBD_OPT_GO;
and recommended that clients should assume a minimum size of 512
unless the server understands NBD_OPT_GO and replied with a smaller
size. Commit 081dd1fe (v2.10) attempted to do that, by assigning
request_alignment to whatever was learned from the server; but
it has two flaws: the assignment is done during bdrv_open() so
it gets unconditionally wiped out back to 1 during any later
bdrv_refresh_limits(); and the code is not using a default of 512
when the server did not report a minimum size.
Fix these issues by moving the assignment to request_alignment
to the right function, and by using a sane default when the
server does not advertise a minimum size.
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180215032905.27146-1-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy<vsementsov@virtuozzo.com>
We don't need the can_write_zeroes_with_unmap field in
BlockDriverInfo, because it is redundant information with
supported_zero_flags & BDRV_REQ_MAY_UNMAP. Note that
BlockDriverInfo and supported_zero_flags are both per-device
settings, rather than global state about the driver as a
whole, which means one or both of these bits of information
can already be conditional. Let's audit how they were set:
crypto: always setting can_write_ to false is pointless (the
struct starts life zero-initialized), no use of supported_
nbd: just recently fixed to set can_write_ if supported_
includes MAY_UNMAP (thus this commit effectively reverts
bca80059e and solves the problem mentioned there in a more
global way)
file-posix, iscsi, qcow2: can_write_ is conditional, while
supported_ was unconditional; but passing MAY_UNMAP would
fail with ENOTSUP if the condition wasn't met
qed: can_write_ is unconditional, but pwrite_zeroes lacks
support for MAY_UNMAP and supported_ is not set. Perhaps
support can be added later (since it would be similar to
qcow2), but for now claiming false is no real loss
all other drivers: can_write_ is not set, and supported_ is
either unset or a passthrough
Simplify the code by moving the conditional into
supported_zero_flags for all drivers, then dropping the
now-unused BDI field. For callers that relied on
bdrv_can_write_zeroes_with_unmap(), we return the same
per-device settings for drivers that had conditions (no
observable change in behavior there); and can now return
true (instead of false) for drivers that support passthrough
(for example, the commit driver) which gives those drivers
the same fix as nbd just got in bca80059e. For callers that
relied on supported_zero_flags, we now have a few more places
that can avoid a wasted call to pwrite_zeroes() that will
just fail with ENOTSUP.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180126193439.20219-1-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
qemu-common.h includes qemu/option.h, but most places that include the
former don't actually need the latter. Drop the include, and add it
to the places that actually need it.
While there, drop superfluous includes of both headers, and
separate #include from file comment with a blank line.
This cleanup makes the number of objects depending on qemu/option.h
drop from 4545 (out of 4743) to 284 in my "build everything" tree.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-20-armbru@redhat.com>
[Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-19-armbru@redhat.com>
Since mirror job supports efficient zero out target mechanism (see
in mirror_dirty_init()), implement bdrv_get_info to make it work
over NBD. Such improvement will allow using the largest chunk possible
and will decrease the number of NBD_CMD_WRITE_ZEROES requests on the wire.
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Message-Id: <20180118115158.17219-1-edgar.kaziakhmedov@virtuozzo.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The find_desc_by_name() from util/qemu-option.c relies on the .name not being
NULL to call strcmp(). This check becomes unsafe when the list is not
NULL-terminated, which is the case of nbd_runtime_opts in block/nbd.c, and can
result in segmentation fault when strcmp() tries to access an invalid memory:
#0 0x00007fff8c75f7d4 in __strcmp_power9 () from /lib64/libc.so.6
#1 0x00000000102d3ec8 in find_desc_by_name (desc=0x1036d6f0, name=0x28e46670 "server.path") at util/qemu-option.c:166
#2 0x00000000102d93e0 in qemu_opts_absorb_qdict (opts=0x28e47a80, qdict=0x28e469a0, errp=0x7fffec247c98) at util/qemu-option.c:1026
#3 0x000000001012a2e4 in nbd_open (bs=0x28e42290, options=0x28e469a0, flags=24578, errp=0x7fffec247d80) at block/nbd.c:406
#4 0x00000000100144e8 in bdrv_open_driver (bs=0x28e42290, drv=0x1036e070 <bdrv_nbd_unix>, node_name=0x0, options=0x28e469a0, open_flags=24578, errp=0x7fffec247f50) at block.c:1135
#5 0x0000000010015b04 in bdrv_open_common (bs=0x28e42290, file=0x0, options=0x28e469a0, errp=0x7fffec247f50) at block.c:1395
>From gdb, the desc[i].name was not NULL and resulted in strcmp() accessing an
invalid memory:
>>> p desc[5]
$8 = {
name = 0x1037f098 "R27A",
type = 1561964883,
help = 0xc0bbb23e <error: Cannot access memory at address 0xc0bbb23e>,
def_value_str = 0x2 <error: Cannot access memory at address 0x2>
}
>>> p desc[6]
$9 = {
name = 0x103dac78 <__gcov0.do_qemu_init_bdrv_nbd_init> "\001",
type = 272101528,
help = 0x29ec0b754403e31f <error: Cannot access memory at address 0x29ec0b754403e31f>,
def_value_str = 0x81f343b9 <error: Cannot access memory at address 0x81f343b9>
}
This patch fixes the segmentation fault in strcmp() by adding a NULL element at
the end of nbd_runtime_opts.desc list, which is the common practice to most of
other structs like runtime_opts in block/null.c. Thus, the desc[i].name != NULL
check becomes safe because it will not evaluate to true when .desc list reached
its end.
Reported-by: R. Nageswara Sastry <nasastry@in.ibm.com>
Buglink: https://bugs.launchpad.net/qemu/+bug/1727259
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.vnet.ibm.com>
Message-Id: <20180105133241.14141-2-muriloo@linux.vnet.ibm.com>
CC: qemu-stable@nongnu.org
Fixes: 7ccc44fd7d
Signed-off-by: Eric Blake <eblake@redhat.com>
The upstream NBD Protocol has defined a new extension to allow
the server to advertise block sizes to the client, as well as
a way for the client to inform the server whether it intends to
obey block sizes.
When using the block layer as the client, we will obey block
sizes; but when used as 'qemu-nbd -c' to hand off to the
kernel nbd module as the client, we are still waiting for the
kernel to implement a way for us to learn if it will honor
block sizes (perhaps by an addition to sysfs, rather than an
ioctl), as well as any way to tell the kernel what additional
block sizes to obey (NBD_SET_BLKSIZE appears to be accurate
for the minimum size, but preferred and maximum sizes would
probably be new ioctl()s), so until then, we need to make our
request for block sizes conditional.
When using ioctl(NBD_SET_BLKSIZE) to hand off to the kernel,
use the minimum block size as the sector size if it is larger
than 512, which also has the nice effect of cooperating with
(non-qemu) servers that don't do read-modify-write when
exposing a block device with 4k sectors; it might also allow
us to visit a file larger than 2T on a 32-bit kernel.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-10-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD Protocol is introducing some additional information
about exports, such as minimum request size and alignment, as
well as an advertised maximum request size. It will be easier
to feed this information back to the block layer if we gather
all the information into a struct, rather than adding yet more
pointer parameters during negotiation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-2-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
uri_parse(...)->scheme may be NULL. In fact, probably every field may be
NULL, and the callers do test this for all of the other fields but not
for scheme (except for block/gluster.c; block/vxhs.c does not access
that field at all).
We can easily fix this by using g_strcmp0() instead of strcmp().
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170613205726.13544-1-mreitz@redhat.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
See also commit fce5d53..9445673 and 85a82e8..c5f1ae3.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Straightforward rebase]
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces, and convert all internal interfaces to
SocketAddressFlat.
BlockdevOptionsNbd is an external interface using SocketAddress. We
already use SocketAddressFlat elsewhere in blockdev-add. Replace it
by SocketAddressFlat while we can (it's new in 2.9) for simplicity and
consistency. For example,
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"data": { "host": "localhost",
"port": "12345" } } } }
becomes
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"host": "localhost", "port": "12345" } } }
Since the internal interfaces still take SocketAddress, this requires
conversion function socket_address_crumple(). It'll go away when I
update the interfaces.
Unfortunately, SocketAddress is also visible in -drive since 2.8:
-drive if=none,driver=nbd,server.type=inet,server.data.host=127.0.0.1,server.data.port=12345
Nobody should be using it, as it's fairly new and has never been
documented, so adding still more compatibility gunk to keep it working
isn't worth the trouble. You now have to use
-drive if=none,driver=nbd,server.type=inet,server.host=127.0.0.1,server.port=12345
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-9-git-send-email-armbru@redhat.com
[mreitz: Change iotest 147 accordingly]
Because of this interface change, iotest 147 has to be adapted.
Unfortunately, we cannot just flatten all of the addresses because
nbd-server-start still takes a plain SocketAddress. Therefore, we need
both and this is most easily achieved by writing the SocketAddress into
the code and flattening it where necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170330221243.17333-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
-blockdev and blockdev_add convert their arguments via QObject to
BlockdevOptions for qmp_blockdev_add(), which converts them back to
QObject, then to a flattened QDict. The QDict's members are typed
according to the QAPI schema.
-drive converts its argument via QemuOpts to a (flat) QDict. This
QDict's members are all QString.
Thus, the QType of a flat QDict member depends on whether it comes
from -drive or -blockdev/blockdev_add, except when the QAPI type maps
to QString, which is the case for 'str' and enumeration types.
The block layer core extracts generic configuration from the flat
QDict, and the block driver extracts driver-specific configuration.
Both commonly do so by converting (parts of) the flat QDict to
QemuOpts, which turns all values into strings. Not exactly elegant,
but correct.
However, A few places access the flat QDict directly:
* Most of them access members that are always QString. Correct.
* bdrv_open_inherit() accesses a boolean, carefully. Correct.
* nfs_config() uses a QObject input visitor. Correct only because the
visited type contains nothing but QStrings.
* nbd_config() and ssh_config() use a QObject input visitor, and the
visited types contain non-QStrings: InetSocketAddress members
@numeric, @to, @ipv4, @ipv6. -drive works as long as you don't try
to use them (they're all optional). @to is ignored anyway.
Reproducer:
-drive driver=ssh,server.host=h,server.port=22,server.ipv4,path=p
-drive driver=nbd,server.type=inet,server.data.host=h,server.data.port=22,server.data.ipv4
both fail with "Invalid parameter type for 'data.ipv4', expected: boolean"
Add suitable comments to all these places. Mark the buggy ones FIXME.
"Fortunately", -drive's driver-specific options are entirely
undocumented.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-5-git-send-email-armbru@redhat.com
[mreitz: Fixed two typos]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Certain features make sense only with certain address families. For
instance, passing file descriptors requires AF_UNIX. Testing
SocketAddress's saddr->type == SOCKET_ADDRESS_KIND_UNIX is obvious,
but problematic: it can't recognize AF_UNIX when type ==
SOCKET_ADDRESS_KIND_FD.
Mark such tests of saddr->type TODO. We may want to check the address
family with getsockname() there.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1490895797-29094-2-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When TCP connection fails between nbd server and client,
the local var, sioc, memory leak.
This patch fixes the memory leak.
Signed-off-by: yaolujing <yaolujing@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1491005709-29989-1-git-send-email-yaolujing@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20170327123223.1199-1-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The split between tests/test-qobject-input-visitor.c and
tests/test-qobject-input-strict.c now makes less sense than ever. The
next commit will take care of that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-20-git-send-email-armbru@redhat.com>
After a visit of a complex QAPI type FOO
ov = qobject_output_visitor_new(&foo);
visit_type_FOO(ov, NULL, expr, &error_abort);
visit_complete(ov, &foo);
we can safely assume qobject_type(foo) is QTYPE_QDICT. We do in many
places, but occasionally assert qobject_type(obj) == QTYPE_QDICT.
Don't. The appropriate place to check such fundamental properties of
QAPI visitors is the test suite.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1487363905-9480-15-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch frees the leaked visitor in nbd_refresh_filename() and uses
visit_free() to fix it. The leak was introduced by the commit 491d6c7.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Upstream NBD protocol recently added the ability to efficiently
write zeroes without having to send the zeroes over the wire,
along with a flag to control whether the client wants a hole.
The generic block code takes care of falling back to the obvious
write of lots of zeroes if we return -ENOTSUP because the server
does not have WRITE_ZEROES.
Ideally, since NBD_CMD_WRITE_ZEROES does not involve any data
over the wire, we want to support transactions that are much
larger than the normal 32M limit imposed on NBD_CMD_WRITE. But
the server may still have a limit smaller than UINT_MAX, so
until experimental NBD protocol additions for advertising various
command sizes is finalized (see [1], [2]), for now we just stick to
the same limits as normal writes.
[1] https://github.com/yoe/nbd/blob/extension-info/doc/proto.md
[2] https://sourceforge.net/p/nbd/mailman/message/35081223/
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-17-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's better to use consistent capitalization of the namespace
used for NBD functions; we have more instances of NBD* than
Nbd*.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-5-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
