Commit Graph

7 Commits

Author SHA1 Message Date
Max Filippov
ba7651fba5 target/xtensa: add linux-user support
Import list of syscalls from the kernel source. Conditionalize code/data
that is only used with softmmu. Implement exception handlers. Implement
signal hander (only the core registers for now, no coprocessors or TIE).

Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-03-16 09:40:34 -07:00
Peter Maydell
e32c41e4f6 target/xtensa updates:
- refactor CCOUNT/CCOMPARE (use QEMU timers instead of instruction counting);
 - support icount; run target/xtensa TCG tests with icount;
 - implement SMP prerequisites: static vector selection, RUNSTALL and RER/WER.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYh/EHAAoJEFH5zJH4P6BEpbMP/ilUpDqeSJNP7k1oObABd0cK
 TFOQ3eXtjvmsl9YT17VU8bQpGHZ9R9qP37TcxPBfWAMs/IMtxCCEAclZwEKpGbrB
 L+GypHH2uXvsf4kH2SvElLTULvhOLlxEkfROkxJ++Pverhk/D8JAVxWNb1C4AU/z
 YIIyH8G2Jj2p4ZYvD9OH0Jmv4FfPWljb1unJzu8Y6XynY/Zh7B4xEsvx44E09/l5
 m450tL+Bs/3faoQgznRUMNR3pCUKYBpQEV1pr0Rbcrs/mp58CH71HyAhr0fH/5OT
 yhD7CGj7e6NqhV+vJvnoU6Z5wTRVUD1Reeb8EIzvqLz+4FJTV9L6BWHEIjvZy4TK
 EIakPNl9jbBRxzAwx8PGXm3xxyTznOs/c+K0u2zcFHPnUxnfTmk+MtkfeTjNvx3x
 jiaSXhkaMguf1dOzhiJbjS7s6Kl6NIu7Pta28ItovOOR4AgHbHz6CVHg5Li1bCD9
 dyjwnwflb8dWXQRojg6cA1qQBiq323+2lKz0IaUUtErnbGNst5sRIlAjxN9wjn0H
 giHPspisKV431vN4ZQnEAmOikNfyGd53b/r+a2na0pP1MaYJ0of5Rl0R6YwNfrUa
 MWp0AVF/+qG9ZBpuH8m+1oa3x1Fnc3+2fvWDafcS75lBRa7eyGuHabpO450bOpHB
 ftrtVBYDRt3+HAoAYKHT
 =WOcm
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/xtensa/tags/20170124-xtensa' into staging

target/xtensa updates:

- refactor CCOUNT/CCOMPARE (use QEMU timers instead of instruction counting);
- support icount; run target/xtensa TCG tests with icount;
- implement SMP prerequisites: static vector selection, RUNSTALL and RER/WER.

# gpg: Signature made Wed 25 Jan 2017 00:27:51 GMT
# gpg:                using RSA key 0x51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB  17D8 51F9 CC91 F83F A044

* remotes/xtensa/tags/20170124-xtensa:
  target-xtensa: implement RER/WER instructions
  target/xtensa: tests: clean up interrupt tests
  target/xtensa: tests: add memctl test
  target/xtensa: implement MEMCTL SR
  target/xtensa: fix ICACHE/DCACHE options detection
  target/xtensa: tests: add ccount write tests
  target/xtensa: tests: replace hardcoded interrupt masks
  target/xtensa: tests: fix timer tests
  target/xtensa: tests: run tests with icount
  target/xtensa: don't continue translation after exception
  target/xtensa: support icount
  target/xtensa: refactor CCOUNT/CCOMPARE
  target/xtensa: implement RUNSTALL
  target/xtensa: add static vectors selection

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-25 16:36:57 +00:00
Max Filippov
3a3c9dc4ca target-xtensa: implement RER/WER instructions
RER and WER are privileged instructions for accessing external
registers. External register address space is local to processor core.
There's no alignment requirements, addressable units are 32-bit wide
registers.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-01-16 19:19:03 -08:00
Max Filippov
9e03ade441 target/xtensa: implement MEMCTL SR
MEMCTL SR controls zero overhead loop buffer and number of ways enabled
in L1 caches.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-01-15 13:01:56 -08:00
Max Filippov
59a71f7578 target/xtensa: refactor CCOUNT/CCOMPARE
Xtensa cores may have a register (CCOUNT) that counts core clock cycles.
It may also have a number of registers (CCOMPAREx); when CCOUNT value
passes the value of CCOMPAREx, timer interrupt x is raised.

Currently xtensa target counts a number of completed instructions and
assumes that for CCOUNT one instruction takes one cycle to complete.
It calls helper function to update CCOUNT register at every TB end and
raise timer interrupts. This scheme works very predictably and doesn't
have noticeable performance impact, but it is hard to use with multiple
synchronized processors, especially with coming MTTCG.

Derive CCOUNT from the virtual simulation time, QEMU_CLOCK_VIRTUAL.
Use native QEMU timers for CCOMPARE timers, one timer for each register.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-01-15 13:01:55 -08:00
Richard Henderson
b79ea941d6 target-xtensa: Use clz opcode
Signed-off-by: Richard Henderson <rth@twiddle.net>
2017-01-10 08:06:11 -08:00
Thomas Huth
fcf5ef2ab5 Move target-* CPU file into a target/ folder
We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.

Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-12-20 21:52:12 +01:00