The aio_co_reschedule_self() API is designed to avoid the race
condition between scheduling the coroutine in another AioContext and
yielding.
The QMP dispatch code uses the open-coded version that appears
susceptible to the race condition at first glance:
aio_co_schedule(qemu_get_aio_context(), qemu_coroutine_self());
qemu_coroutine_yield();
The code is actually safe because the iohandler and qemu_aio_context
AioContext run under the Big QEMU Lock. Nevertheless, set a good example
and use aio_co_reschedule_self() so it's obvious that there is no race.
Suggested-by: Hanna Reitz <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-6-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Documentation of type BlockdevOptionsIscsi describes the type's
purpose after its members. Everywhere else, we do it the other way
round. Move it for consistency.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-5-armbru@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Documentation of BlockExportRemoveMode has
Potential additional modes to be added in the future:
hide: Just hide export from new clients, leave existing connections
as is. Remove export after all clients are disconnected.
soft: Hide export from new clients, answer with ESHUTDOWN for all
further requests from existing clients.
I think this is useful only for developers. Elide it from generated
documentation by turning it into a TODO section.
This effectively reverts my own commit b71fd73cc4 (Revert "qapi:
BlockExportRemoveMode: move comments to TODO"). At the time, I was
about to elide TODO sections from the generated manual, I wasn't sure
about this one, and decided to avoid change. And now I've made up my
mind.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Documentation generated for dump-skeys contains
This command is only supported on s390 architecture.
and
If
~~
"TARGET_S390X"
The former became redundant in commit 901a34a400 (qapi: add 'If:'
section to generated documentation) added the latter. Drop the
former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Documentation generated for SchemaInfo looks like
The members of "SchemaInfoBuiltin" when "meta-type" is ""builtin""
The members of "SchemaInfoEnum" when "meta-type" is ""enum""
The members of "SchemaInfoArray" when "meta-type" is ""array""
The members of "SchemaInfoObject" when "meta-type" is ""object""
The members of "SchemaInfoAlternate" when "meta-type" is ""alternate""
The members of "SchemaInfoCommand" when "meta-type" is ""command""
The members of "SchemaInfoEvent" when "meta-type" is ""event""
Additional members depend on the value of "meta-type".
The last line became redundant when commit 88f63467c5 (qapi2texi:
Generate reference to base type members) added the lines preceding it.
Drop it.
BlockdevOptions has the same issue. Drop
Remaining options are determined by the block driver.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240129115008.674248-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'uri' argument should be optional, as 'uri' and 'channels'
arguments are mutally exclusive in nature.
Fixes: 074dbce5fc (migration: New migrate and migrate-incoming argument 'channels')
Signed-off-by: Het Gala <het.gala@nutanix.com>
Link: https://lore.kernel.org/r/20240123064219.40514-1-het.gala@nutanix.com
Signed-off-by: Peter Xu <peterx@redhat.com>
- virtio-blk: Multiqueue fixes and cleanups
- blklogwrites: Fixes for write_zeroes and superblock update races
- commit/stream: Allow users to request only format driver names in
backing file format
- monitor: only run coroutine commands in qemu_aio_context
- Some iotest fixes
-----BEGIN PGP SIGNATURE-----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=KQJl
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- virtio-blk: Multiqueue fixes and cleanups
- blklogwrites: Fixes for write_zeroes and superblock update races
- commit/stream: Allow users to request only format driver names in
backing file format
- monitor: only run coroutine commands in qemu_aio_context
- Some iotest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmWzpOwRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZNzg//W1+C7HxLft4Jc4O1BcOoOLlGCg4Esupt
# z0/XLZ9+xVQUtjQ82pFzf9XaWQs8CuNT3FBUKi+ngdwZ0JBThIv0aGiMZBcAeQjD
# qshPFgDM1lGL4ICIaT73/qfUzQgO3oruZj9F+ShBBzoasNWVoRzqqVDR3pinLwTp
# D4TU+3A6LkdhlYGT60SYfRq/UKNmCA1s2wysdjqXxS6KOEURNF2VBnz0Nu76qrVb
# 3P/a55GPiJIn+VVsdQ0J4vyyzn23m7I7WZOJ7Sjm1EfSJ6SvcDbhWsZTUonaV2rU
# qZ3WI/jggqxXRV8F2AaA4suS/Cc8RkX2KfcN8fB6wDC2eI5USSatjh6xfw5xH9Ll
# NRKUO4vFFR3Lf8wN9apg0Bwxqi0GOm9kvBJT5QqjQ16R1dvqBLqbZqcx6ZXqWFXe
# /Iy243Tz19mWTFVUj0EgCKQpNz9F4SyXxV83HtSR1lJ5mhthnLxkvUOe7jsFPE4d
# 1Z3uBNWnx2mKFkhlwocMTKayYqxPuKQ+YjqrRoplLW1GZoBeoalKRGf8/RHa6kQx
# gh4cguihlb71AH1AO1QuYpiZt9G4RJR2RZlIoCPJY5TaKJedcxMVn8H+8/F0PnQd
# gPysZf7hTU1xCUV6TClDd+f2fuvqZYwXdwHJ9iiohNkbFq4HFQUp4nk4/eEPGSe/
# uv8oE813E30=
# =KQJl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 Jan 2024 12:26:20 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
iotests/277: Use iotests.sock_dir for socket creation
iotests/iothreads-stream: Use the right TimeoutError
tests/unit: Bump test-replication timeout to 60 seconds
iotests/264: Use iotests.sock_dir for socket creation
block/blklogwrites: Protect mutable driver state with a mutex.
virtio-blk: always set ioeventfd during startup
virtio-blk: tolerate failure to set BlockBackend AioContext
virtio-blk: restart s->rq reqs in vq AioContexts
virtio-blk: rename dataplane to ioeventfd
virtio-blk: rename dataplane create/destroy functions
virtio-blk: move dataplane code into virtio-blk.c
monitor: only run coroutine commands in qemu_aio_context
iotests: port 141 to Python for reliable QMP testing
iotests: add filter_qmp_generated_node_ids()
stream: Allow users to request only format driver names in backing file format
commit: Allow users to request only format driver names in backing file format
string-output-visitor: Fix (pseudo) struct handling
block/blklogwrites: Fix a bug when logging "write zeroes" operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
monitor_qmp_dispatcher_co() runs in the iohandler AioContext that is not
polled during nested event loops. The coroutine currently reschedules
itself in the main loop's qemu_aio_context AioContext, which is polled
during nested event loops. One known problem is that QMP device-add
calls drain_call_rcu(), which temporarily drops the BQL, leading to all
sorts of havoc like other vCPU threads re-entering device emulation code
while another vCPU thread is waiting in device emulation code with
aio_poll().
Paolo Bonzini suggested running non-coroutine QMP handlers in the
iohandler AioContext. This avoids trouble with nested event loops. His
original idea was to move coroutine rescheduling to
monitor_qmp_dispatch(), but I resorted to moving it to qmp_dispatch()
because we don't know if the QMP handler needs to run in coroutine
context in monitor_qmp_dispatch(). monitor_qmp_dispatch() would have
been nicer since it's associated with the monitor implementation and not
as general as qmp_dispatch(), which is also used by qemu-ga.
A number of qemu-iotests need updated .out files because the order of
QMP events vs QMP responses has changed.
Solves Issue #1933.
Cc: qemu-stable@nongnu.org
Fixes: 7bed89958b ("device_core: use drain_call_rcu in in qmp_device_add")
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215192
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2214985
Buglink: https://issues.redhat.com/browse/RHEL-17369
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240118144823.1497953-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-stream QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <bbee9a0a59748a8893289bf8249f568f0d587e62.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit ff32bb53 tried to get minimal struct support into the string
output visitor by just making it return "<omitted>". Unfortunately, it
forgot that the caller will still make more visitor calls for the
content of the struct.
If the struct is contained in a list, such as IOThreadVirtQueueMapping,
in the better case its fields show up as separate list entries. In the
worse case, it contains another list, and the string output visitor
doesn't support nested lists and asserts that this doesn't happen. So as
soon as the optional "vqs" field in IOThreadVirtQueueMapping is
specified, we get a crash.
This can be reproduced with the following command line:
echo "info qtree" | ./qemu-system-x86_64 \
-object iothread,id=t0 \
-blockdev null-co,node-name=disk \
-device '{"driver": "virtio-blk-pci", "drive": "disk",
"iothread-vq-mapping": [{"iothread": "t0", "vqs": [0]}]}' \
-monitor stdio
Fix the problem by counting the nesting level of structs and ignoring
any visitor calls for values (apart from start/end_struct) while we're
not on the top level.
Lists nested directly within lists remain unimplemented, as we don't
currently have a use case for them.
Fixes: ff32bb5347
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2069
Reported-by: Aihua Liang <aliang@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240109181717.42493-1-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
"Since X.Y" is not recognized as a tagged section, and therefore not
formatted as such in generated documentation. Fix by adding the
required colon.
Previously fixed in commit 433a4fdc42 (qapi: Fix malformed "Since:"
section tags)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
docs/devel/qapi-code-gen demands that the "second and subsequent lines
of sections other than "Example"/"Examples" should be indented".
Commit a937b6aa73 (qapi: Reformat doc comments to conform to current
conventions) missed a few instances, and a few more have crept in
since. Indent them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit e050e42678 (qapi: Use explicit bulleted lists) added list
markup to correct bad rendering:
A JSON block comment like this:
Returns: nothing on success
If @node is not a valid block device, DeviceNotFound
If @name is not found, GenericError with an explanation
renders like this:
Returns: nothing on success If node is not a valid block device,
DeviceNotFound If name is not found, GenericError with an explanation
because whitespace is not significant.
Use an actual bulleted list, so that the formatting is correct.
It missed a few instances. Commit a937b6aa73 (qapi: Reformat doc
comments to conform to current conventions) then reflowed them.
Revert the reflowing, and add list markup.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
docs/interop/bitmaps.rst uses references like
`qemu-qmp-ref <qemu-qmp-ref.html>`_
`query-block <qemu-qmp-ref.html#index-query_002dblock>`_
to refer to and into docs/interop/qemu-qmp-ref.rst.
Clean up the former: use :doc:`qemu-qmp-ref`.
I don't know how to clean up the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Conversion of docs/devel/qapi-code-gen.txt to ReST left several
dangling references behind. Fix them to point to
docs/devel/qapi-code-gen.rst.
Fixes: f7aa076dbd (docs: convert qapi-code-gen.txt to ReST)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This member has been deprecated before the 8.1 release, in commit
34c18203d4 ("qmp: Deprecate 'singlestep' member of StatusInfo").
Time to drop it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240117151430.29235-2-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, a vm in the suspended state is not completely stopped. The VCPUs
have been paused, but the cpu clock still runs, and runstate notifiers for
the transition to stopped have not been called. This causes problems for
live migration. Stale cpu timers_state is saved to the migration stream,
causing time errors in the guest when it wakes from suspend, and state that
would have been modified by runstate notifiers is wrong.
Modify vm_stop to completely stop the vm if the current state is suspended,
transition to RUN_STATE_PAUSED, and remember that the machine was suspended.
Modify vm_start to restore the suspended state.
This affects all callers of vm_stop and vm_start, notably, the qapi stop and
cont commands:
old behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_SUSPENDED
new behavior:
RUN_STATE_SUSPENDED --> stop --> RUN_STATE_PAUSED
RUN_STATE_PAUSED --> cont --> RUN_STATE_SUSPENDED
For example:
(qemu) info status
VM status: paused (suspended)
(qemu) stop
(qemu) info status
VM status: paused
(qemu) system_wakeup
Error: Unable to wake up: guest is not in suspended state
(qemu) cont
(qemu) info status
VM status: paused (suspended)
(qemu) system_wakeup
(qemu) info status
VM status: running
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/1704312341-66640-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
virtio-blk and virtio-scsi devices will need a way to specify the
mapping between IOThreads and virtqueues. At the moment all virtqueues
are assigned to a single IOThread or the main loop. This single thread
can be a CPU bottleneck, so it is necessary to allow finer-grained
assignment to spread the load.
Introduce DEFINE_PROP_IOTHREAD_VQ_MAPPING_LIST() so devices can take a
parameter that maps virtqueues to IOThreads. The command-line syntax for
this new property is as follows:
--device '{"driver":"foo","iothread-vq-mapping":[{"iothread":"iothread0","vqs":[0,1,2]},...]}'
IOThreads are specified by name and virtqueues are specified by 0-based
index.
It will be common to simply assign virtqueues round-robin across a set
of IOThreads. A convenient syntax that does not require specifying
individual virtqueue indices is available:
--device '{"driver":"foo","iothread-vq-mapping":[{"iothread":"iothread0"},{"iothread":"iothread1"},...]}'
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231220134755.814917-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
StringOutputVisitor crashes when it visits a struct because
->start_struct() is NULL.
Show "<omitted>" instead of crashing. This is necessary because the
virtio-blk-pci iothread-vq-mapping parameter that I'd like to introduce
soon is a list of IOThreadMapping structs.
This patch is a quick fix to solve the crash, but the long-term solution
is replacing StringOutputVisitor with something that can handle the full
gamut of values in QEMU.
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231212134934.500289-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce an iommufd object which allows the interaction
with the host /dev/iommu device.
The /dev/iommu can have been already pre-opened outside of qemu,
in which case the fd can be passed directly along with the
iommufd object:
This allows the iommufd object to be shared accross several
subsystems (VFIO, VDPA, ...). For example, libvirt would open
the /dev/iommu once.
If no fd is passed along with the iommufd object, the /dev/iommu
is opened by the qemu code.
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
With the introduction of list-based array properties in qdev, the string
output visitor has to deal with lists of non-integer elements now ('info
qtree' prints all properties with the string output visitor).
Currently there is no explicit support for such lists, and the resulting
output is only the last element because string_output_set() always
replaces the output with the latest value. Instead of replacing the old
value, append comma separated values in list context.
The difference can be observed in 'info qtree' with a 'rocker' device
that has a 'ports' list with more than one element.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231121173416.346610-3-kwolf@redhat.com>
Let's use more inclusive language here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The command requires color conversion and line-by-line feeding. We could
have a simple fallback for simple formats though.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Provides a display option, zoom-to-fit, that enables scaling of the
display when full-screen mode is enabled.
Also ensures that the corresponding menu item is marked as enabled when
the option is set to on.
Signed-off-by: Carwyn Ellis <carwynellis@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231027154920.80626-2-carwynellis@gmail.com>
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
-----BEGIN PGP SIGNATURE-----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=2A+W
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu into staging
Third RISC-V PR for 8.2
* Rename ext_icboz to ext_zicboz
* Rename ext_icbom to ext_zicbom
* Rename ext_icsr to ext_zicsr
* Rename ext_ifencei to ext_zifencei
* Add RISC-V Virtual IRQs and IRQ filtering support
* Change default linux-user cpu to 'max'
* Update 'virt' machine core limit
* Add query-cpu-model-expansion API
* Rename epmp to smepmp and expose the extension
* Clear pmp/smepmp bits on reset
* Ignore pmp writes when RW=01
* Support zicntr/zihpm flags and disable support
* Correct CSR_MSECCFG operations
* Update mail address for Weiwei Li
* Update RISC-V vector crypto to ratified v1.0.0
* Clear the Ibex/OpenTitan SPI interrupts even if disabled
* Set the OpenTitan priv to 1.12.0
* Support discontinuous PMU counters
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmVJoOEACgkQr3yVEwxT
# gBPwcw/5AXgSVu521IHpobofq4Skc2rpO9P0Hep3IniBuS+5+h2XM3fwWNBaeeGj
# LZgdXDrCfcCnPuFh2I5j1D885xJDncDF4LET9EFtxK+BTT8eC5JpaCnORdV3Zd2T
# C7qdq1r4J/wKBel3cAz1jlLXc2Pssle4NFaMZGmOGlNX/mLJUYkI6BwKG9wNiCI+
# cCRQW5bEv9g8XzPYPsIKhX9aTegDKdV5x4Xj3YyVs8qkZTVM7Ona8GTpy6eShNfL
# h/RW+yvSxLwfKC9YJHesjI1oqhLsAuA7hFu5AVHiedFNAD5FevMZsZwrqjrmeBOG
# 5awBw9XgfXFFl7jQ0VQVRknt/PFANzTmGGbjLUkaXgJ6iTmH7oIMzwbkx2pM/0Qd
# HV2EboUPe5rJl0SNhcDMCJkYJYpt4z6TVXFpN5p10WU4K1AJXZf9P3YkChcxWiSK
# B4DlY4ax3W77voySwbKCvJRIRWCFQZmtl7doFY5dEQz2ERcNfI7VIB1GKIj7BlGm
# AVTCc5G9KghsaB8q0BzYbDplzCggdaaUBRgpIgLS/n22GKJlOisFwMCawWquPkEw
# i0t3ftt+Ket4Qnnq+dO4W3ehR4qW1/XatCWgQ3NCSgUeS4/9VK3h/nz5t+L7iKwp
# mjp86gNN11wcJRsBIIV7nOAmSAs9ybCm2F4J6YAyh3n1IlRVN0Q=
# =2A+W
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 10:28:49 HKT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20231107' of https://github.com/alistair23/qemu: (49 commits)
docs/about/deprecated: Document RISC-V "pmu-num" deprecation
target/riscv: Add "pmu-mask" property to replace "pmu-num"
target/riscv: Use existing PMU counter mask in FDT generation
target/riscv: Don't assume PMU counters are continuous
target/riscv: Propagate error from PMU setup
target/riscv: cpu: Set the OpenTitan priv to 1.12.0
hw/ssi: ibex_spi_host: Clear the interrupt even if disabled
disas/riscv: Replace TABs with space
disas/riscv: Add support for vector crypto extensions
disas/riscv: Add rv_codec_vror_vi for vror.vi
disas/riscv: Add rv_fmt_vd_vs2_uimm format
target/riscv: Move vector crypto extensions to riscv_cpu_extensions
target/riscv: Expose Zvks[c|g] extnesion properties
target/riscv: Add cfg properties for Zvks[c|g] extensions
target/riscv: Expose Zvkn[c|g] extnesion properties
target/riscv: Add cfg properties for Zvkn[c|g] extensions
target/riscv: Expose Zvkb extension property
target/riscv: Replace Zvbb checking by Zvkb
target/riscv: Add cfg property for Zvkb extension
target/riscv: Expose Zvkt extension property
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- One patch to make qcow2's discard-no-unref option do better what it is
supposed to do (i.e. prevent fragmentation)
- Two fixes for zoned requests
-----BEGIN PGP SIGNATURE-----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=5w7S
-----END PGP SIGNATURE-----
Merge tag 'pull-block-2023-11-06' of https://gitlab.com/hreitz/qemu into staging
Block patches:
- One patch to make qcow2's discard-no-unref option do better what it is
supposed to do (i.e. prevent fragmentation)
- Two fixes for zoned requests
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEy2LXoO44KeRfAE00ofpA0JgBnN8FAmVJHbgSHGhyZWl0ekBy
# ZWRoYXQuY29tAAoJEKH6QNCYAZzfLn4QAKxuUYZaXirv6K4U2tW4aAJtc5uESdwv
# WYhG7YU7MleBGCY0fRoih5thrPrzRLC8o1QhbRcA36+/PAZf4BYrJEfqLUdzuN5x
# 6Vb1n3NRUzPD1+VfL/B9hVZhFbtTOUZuxPGEqCoHAmqBaeKuYRT1bLZbtRtPVLSk
# 5eTMiyrpRMlBWc7O71eGKLqU4k0vAznwHBGf2Z93qWAsKcRZCwbAWYa7Q6rJ9jJ8
# 1jNsQuAk0p74/uGEpFhoEVrFEcV6pMbI4+jB9i0t9YYxT0tLIdIX1VUx+AHJfItk
# IF2stB6SFOaAy2W3Fn+0oJvz40aMLzg9VjEeTpGmdlKC67ZTYa6Obwzy5WNLPIap
# k7VUheUEe8qoKUtxQNxGLR/HKEJSFXyhU0lgAGxE1gl2xc1QFFFsrimpwFd3d37j
# 3PwfhjARHonf4ZXgsvtIjb7nG9seMZYO7Vht0OztJyW8c2XN5OFVPir9xLbd9VUg
# wZNGB8jAsHgj77+S/mRIwpP+laKL8wB7zYZ1mgFI98QJIYqL8tGdV/IiUhLljHzc
# XAmwekOhBMMbgHhliBy9zDuTy59+zZ0FoxZPn/JvBjqBAkEnz9EbhHxi2imQg+1d
# XSoLbx1X1yEbepWz8mCGiveLIPkt+3qMJuuQF76nURaA+nm3tCl/nKca6QLnVKzU
# 2QtPWS0qRmwd
# =5w7S
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 07 Nov 2023 01:09:12 HKT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* tag 'pull-block-2023-11-06' of https://gitlab.com/hreitz/qemu:
file-posix: fix over-writing of returning zone_append offset
block/file-posix: fix update_zones_wp() caller
qcow2: keep reference on zeroize with discard-no-unref enabled
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit 5960f254db since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
-----BEGIN PGP SIGNATURE-----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=RAb0
-----END PGP SIGNATURE-----
Merge tag 'pull-hv-balloon-20231106' of https://github.com/maciejsszmigiero/qemu into staging
Hyper-V Dynamic Memory protocol driver.
This driver is like virtio-balloon on steroids for Windows guests:
it allows both changing the guest memory allocation via ballooning and
inserting pieces of extra RAM into it on demand from a provided memory
backend via Windows-native Hyper-V Dynamic Memory protocol.
* Preparatory patches to support empty memory devices and ones with
large alignment requirements.
* Revert of recently added "hw/virtio/virtio-pmem: Replace impossible
check by assertion" commit 5960f254db since this series makes this
situation possible again.
* Protocol definitions.
* Hyper-V DM protocol driver (hv-balloon) base (ballooning only).
* Hyper-V DM protocol driver (hv-balloon) hot-add support.
* qapi query-memory-devices support for the driver.
* qapi HV_BALLOON_STATUS_REPORT event.
* The relevant PC machine plumbing.
* New MAINTAINERS entry for the above.
# -----BEGIN PGP SIGNATURE-----
#
# iQGzBAABCAAdFiEE4ndqq6COJv9aG0oJUrHW6VHQzgcFAmVI81IACgkQUrHW6VHQ
# zgdzTgv+I5eV2R01YLOBBJhBjzxZ4/BUqkuUHNxHpfjuCqEIzPb7FIfoZ4ZyXZFT
# YJdSE4lPeTZLrmmi/Nt6G0rUKDvdCeIgkS2VLHFSsTV8IzcT71BTRGzV0zAjUF5v
# yDH6uzo6e9gmaziIalRjibUxSDjCQmoCifms2rS2DwazADudUp+naGfm+3uyA0gM
# raOfBfRkNZsDqhXg2ayuqPIES75xQONoON9xYPKDAthS48POEbqtWBKuFopr3kXY
# y0eph+NAw+RajCyLYKM3poIgaSu3l4WegInuKQffzqKR8dxrbwPdCmtgo6NSHx0W
# uDfl7FUBnGzrR18VU4ZfTSrF5SVscGwF9EL7uocJen15inJjl1q3G53uZgyGzHLC
# cw8fKMjucmE8njQR2qiMyX0b+T4+9nKO1rykBgTG/+c9prRUVoxYpFCF117Ei0U8
# QzLGACW1oK+LV41bekWAye7w9pShUtFaxffhPbJeZDDGh7q0x61R3Z3yKkA07p46
# /YWWFWUD
# =RAb0
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 06 Nov 2023 22:08:18 HKT
# gpg: using RSA key E2776AABA08E26FF5A1B4A0952B1D6E951D0CE07
# gpg: Good signature from "Maciej S. Szmigiero <mail@maciej.szmigiero.name>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 727A 0D4D DB9E D9F6 039B ECEF 847F 5E37 90CE 0977
# Subkey fingerprint: E277 6AAB A08E 26FF 5A1B 4A09 52B1 D6E9 51D0 CE07
* tag 'pull-hv-balloon-20231106' of https://github.com/maciejsszmigiero/qemu:
MAINTAINERS: Add an entry for Hyper-V Dynamic Memory Protocol
hw/i386/pc: Support hv-balloon
qapi: Add HV_BALLOON_STATUS_REPORT event and its QMP query command
qapi: Add query-memory-devices support to hv-balloon
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) hot-add support
Add Hyper-V Dynamic Memory Protocol driver (hv-balloon) base
Add Hyper-V Dynamic Memory Protocol definitions
memory-device: Drop size alignment check
Revert "hw/virtio/virtio-pmem: Replace impossible check by assertion"
memory-device: Support empty memory devices
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When the discard-no-unref flag is enabled, we keep the reference for
normal discard requests.
But when a discard is executed on a snapshot/qcow2 image with backing,
the discards are saved as zero clusters in the snapshot image.
When committing the snapshot to the backing file, not
discard_in_l2_slice is called but zero_in_l2_slice. Which did not had
any logic to keep the reference when discard-no-unref is enabled.
Therefor we add logic in the zero_in_l2_slice call to keep the reference
on commit.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1621
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Message-Id: <20231003125236.216473-2-jean-louis@dupond.be>
[hreitz: Made the documentation change more verbose, as discussed
on-list]
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Used by the hv-balloon driver for (optional) guest memory status reports.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Used by the driver to report its provided memory state information.
Co-developed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Add support for the query-cpu-model-expansion QMP command to LoongArch.
We support query the cpu features.
e.g
la464 and max cpu support LSX/LASX, default enable,
la132 not support LSX/LASX.
1. start with '-cpu max,lasx=off'
(QEMU) query-cpu-model-expansion type=static model={"name":"max"}
{"return": {"model": {"name": "max", "props": {"lasx": false, "lsx": true}}}}
2. start with '-cpu la464,lasx=off'
(QEMU) query-cpu-model-expansion type=static model={"name":"la464"}
{"return": {"model": {"name": "max", "props": {"lasx": false, "lsx": true}}}
3. start with '-cpu la132,lasx=off'
qemu-system-loongarch64: can't apply global la132-loongarch-cpu.lasx=off: Property 'la132-loongarch-cpu.lasx' not found
4. start with '-cpu max,lasx=off' or start with '-cpu la464,lasx=off' query cpu model la132
(QEMU) query-cpu-model-expansion type=static model={"name":"la132"}
{"return": {"model": {"name": "la132"}}}
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231020084925.3457084-4-gaosong@loongson.cn>
The QMP dump API represents the dump format as an enumeration. Add three
new enumerators, one for each supported kdump compression, each named
"kdump-raw-*".
For the HMP command line, rather than adding a new flag corresponding to
each format, it seems more human-friendly to add a single flag "-R" to
switch the kdump formats to "raw" mode. The choice of "-R" also
correlates nicely to the "makedumpfile -R" option, which would serve to
reassemble a flattened vmcore.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[ Marc-André: replace loff_t with off_t, indent fixes ]
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230918233233.1431858-4-stephen.s.brennan@oracle.com>
MigrateChannelList allows to connect accross multiple interfaces.
Add MigrateChannelList struct as argument to migration QAPIs.
We plan to include multiple channels in future, to connnect
multiple interfaces. Hence, we choose 'MigrateChannelList'
as the new argument over 'MigrateChannel' to make migration
QAPIs future proof.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-10-farosas@suse.de>
This patch introduces well defined MigrateAddress struct
and its related child objects.
The existing argument of 'migrate' and 'migrate-incoming' QAPI
- 'uri' is of type string. The current implementation follows
double encoding scheme for fetching migration parameters like
'uri' and this is not an ideal design.
Motive for intoducing struct level design is to prevent double
encoding of QAPI arguments, as Qemu should be able to directly
use the QAPI arguments without any level of encoding.
Note: this commit only adds the type, and actual uses comes
in later commits.
Fabiano fixed for "file" transport.
Suggested-by: Aravind Retnakaran <aravind.retnakaran@nutanix.com>
Signed-off-by: Het Gala <het.gala@nutanix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231023182053.8711-2-farosas@suse.de>
Message-Id: <20231023182053.8711-3-farosas@suse.de>
Add the cpr-reboot migration mode. Usage:
$ qemu-system-$arch -monitor stdio ...
QEMU 8.1.50 monitor - type 'help' for more information
(qemu) migrate_set_capability x-ignore-shared on
(qemu) migrate_set_parameter mode cpr-reboot
(qemu) migrate -d file:vm.state
(qemu) info status
VM status: paused (postmigrate)
(qemu) quit
$ qemu-system-$arch -monitor stdio -incoming defer ...
QEMU 8.1.50 monitor - type 'help' for more information
(qemu) migrate_set_capability x-ignore-shared on
(qemu) migrate_set_parameter mode cpr-reboot
(qemu) migrate_incoming file:vm.state
(qemu) info status
VM status: running
In this mode, the migrate command saves state to a file, allowing one
to quit qemu, reboot to an updated kernel, and restart an updated version
of qemu. The caller must specify a migration URI that writes to and reads
from a file. Unlike normal mode, the use of certain local storage options
does not block the migration, but the caller must not modify guest block
devices between the quit and restart. To avoid saving guest RAM to the
file, the memory backend must be shared, and the @x-ignore-shared migration
capability must be set. Guest RAM must be non-volatile across reboot, such
as by backing it with a dax device, but this is not enforced. The restarted
qemu arguments must match those used to initially start qemu, plus the
-incoming option.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-6-git-send-email-steven.sistare@oracle.com>
Create a mode migration parameter that can be used to select alternate
migration algorithms. The default mode is normal, representing the
current migration algorithm, and does not need to be explicitly set.
No functional change until a new mode is added, except that the mode is
shown by the 'info migrate' command.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1698263069-406971-2-git-send-email-steven.sistare@oracle.com>
- virtio-blk: use blk_io_plug_call() instead of notification BH
- mirror: allow switching from background to active mode
- qemu-img rebase: add compression support
- Fix locking in media change monitor commands
- Fix a few blockjob-related deadlocks when using iothread
-----BEGIN PGP SIGNATURE-----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=RdxS
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- virtio-blk: use blk_io_plug_call() instead of notification BH
- mirror: allow switching from background to active mode
- qemu-img rebase: add compression support
- Fix locking in media change monitor commands
- Fix a few blockjob-related deadlocks when using iothread
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVBTkERHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZiqRAAqvsWbblmEGJ7TBKYQK3f8QshJ66RxzbC
# 4eSjKHrciWNTeeIeU8r8OvFcPPoTcPXxpcmasD2gsAxG5W5N8vkPbBkW+YT4YdDJ
# pWJXrbJ15nILC4DmnR1ARVtvxKgv9zy5LSm5bjss1K+OSYJl/nx+ILjmfVZnYDF7
# z1dP/G0JxKKm4JzAIdBE3uZS+6Q5kx/wGYlJv8EQmlH3DYfsJfy6Lthe9jfw8ijg
# lSqLoQ+D0lEd6Bk4XbkUqqBxFcYBWTfU6qPZoyIO94zCTwTG9yIjmoivxmmfwQZq
# cJUTGGZjcxpJYnvcC6P13WgcWBtcD9L2kYFVH0JyjpwcSg9cCGHMF66n9pSlyEGq
# DUikwVzbTwOotwzYQyM88v4ET+2+Qdcwn8pRbv9PllEczh0kAsUAEuxSgtz4NEcN
# bZrap/16xHFybNOKkMZcmpqxspT5NXKbDODUP0IvbSYMOYpWS983nBTxwMRpyHog
# 2TFDZu4DjNiPkI2BcYM5VOKk6diNowZFShcEKvoaOLX/n9EBhP0tjoH9VUn1800F
# myHrhF2jpIf9GhErMWB7N2W3/0aK0pqdQgbpVnd1ARDdIdYkr7G/S+50D9K80b6n
# 0q2E7br4S5bcsY0HQzBL9YARSayY+lVOssLoolCWEsYzijdBQmAvs5THajFKcism
# /idI6nlp2Vs=
# =RdxS
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 01 Nov 2023 03:58:09 JST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (27 commits)
iotests: add test for changing mirror's copy_mode
mirror: return mirror-specific information upon query
blockjob: query driver-specific info via a new 'query' driver method
qapi/block-core: turn BlockJobInfo into a union
qapi/block-core: use JobType for BlockJobInfo's type
mirror: implement mirror_change method
block/mirror: determine copy_to_target only once
block/mirror: move dirty bitmap to filter
block/mirror: set actively_synced even after the job is ready
blockjob: introduce block-job-change QMP command
virtio-blk: remove batch notification BH
virtio: use defer_call() in virtio_irqfd_notify()
util/defer-call: move defer_call() to util/
block: rename blk_io_plug_call() API to defer_call()
blockdev: mirror: avoid potential deadlock when using iothread
block: avoid potential deadlock during bdrv_graph_wrlock() in bdrv_close()
blockjob: drop AioContext lock before calling bdrv_graph_wrlock()
iotests: Test media change with iothreads
block: Fix locking in media change monitor commands
iotests: add tests for "qemu-img rebase" with compression
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To start out, only actively-synced is returned.
For example, this is useful for jobs that started out in background
mode and switched to active mode. Once actively-synced is true, it's
clear that the mode switch has been completed. Note that completion of
the switch might happen much earlier, e.g. if the switch happens
before the job is ready, once all background operations have finished.
It's assumed that whether the disks are actively-synced or not is more
interesting than whether the mode switch completed. That information
can still be added if required in the future.
In presence of an iothread, the actively_synced member is now shared
between the iothread and the main thread, so turn accesses to it
atomic.
Requires to adapt the output for iotest 109.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-10-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to additionally return job-type-specific information.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-8-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to turn BlockJobInfo into a union with @type as the
discriminator. That requires it to be an enum. Even without that
requirement, it's nicer to have an enum instead of a str here.
No functional change is intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031135431.393137-7-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
which allows switching the @copy-mode from 'background' to
'write-blocking'.
This is useful for management applications, so they can start out in
background mode to avoid limiting guest write speed and switch to
active mode when certain criteria are fulfilled.
In presence of an iothread, the copy_mode member is now shared between
the iothread and the main thread, so turn accesses to it atomic.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-6-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
which will allow changing job-type-specific options after job
creation.
In the JobVerbTable, the same allow bits as for set-speed are used,
because set-speed can be considered an existing change command.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018115513.2163-6-quintela@redhat.com>
It is obsolete. It is better to use driver-mirror with NBD instead.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Eric Blake <eblake@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Hanna Czenczek <hreitz@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231018115513.2163-5-quintela@redhat.com>
