When using the --list option, qemu-nbd acts as an NBD client rather
than a server. As such when using TLS, it has a need to validate
the server certificate. This adds a --tls-hostname option which can
be used to override the default hostname used for certificate
validation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-5-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
When connecting to an NBD server with TLS and x509 credentials,
the client must validate the hostname it uses for the connection,
against that published in the server's certificate. If the client
is tunnelling its connection over some other channel, however, the
hostname it uses may not match the info reported in the server's
certificate. In such a case, the user needs to explicitly set an
override for the hostname to use for certificate validation.
This is achieved by adding a 'tls-hostname' property to the NBD
block driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-4-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In
commit a71d597b98
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Thu Jun 10 13:08:00 2021 +0300
block/nbd: reuse nbd_co_do_establish_connection() in nbd_open()
the use of the 'hostname' field from the BDRVNBDState struct was
lost, and 'nbd_connect' just hardcoded it to match the IP socket
address. This was a harmless bug at the time since we block use
with anything other than IP sockets.
Shortly though, we want to allow the caller to override the hostname
used in the TLS certificate checks. This is to allow for TLS
when doing port forwarding or tunneling. Thus we need to reinstate
the passing along of the 'hostname'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-3-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the TLS session object assumes that the caller will always
provide a hostname when using x509 creds on a client endpoint. This
relies on the caller to detect and report an error if the user has
configured QEMU with x509 credentials on a UNIX socket. The migration
code has such a check, but it is too broad, reporting an error when
the user has configured QEMU with PSK credentials on a UNIX socket,
where hostnames are irrelevant.
Putting the check into the TLS session object credentials validation
code ensures we report errors in only the scenario that matters.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-2-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Mea culpa. Dan's patch wound up with the wrong import path because I
re-ordered my most recent pull request and missed that this needed a fix
on rebase.
Fixes: 43912529
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 20220225170828.3418305-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
_bind_hack() was a quick fix to allow async QMP to call bind(2) prior to
calling listen(2) and accept(2). This wasn't sufficient to fully address
the race condition present in synchronous clients.
With the race condition in legacy.py fixed (see the previous commit),
there are no longer any users of _bind_hack(). Drop it.
Fixes: b0b662bb2b
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-11-jsnow@redhat.com
[Expanded commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
legacy.py provides a synchronous model. iotests frequently uses this
paradigm:
- create QMP client object
- start QEMU process
- await connection from QEMU process
In the switch from sync to async QMP, the QMP client object stopped
calling bind() and listen() during the QMP object creation step, which
creates a race condition if the QEMU process dials in too quickly.
With refactoring out of the way, restore the former behavior of calling
bind() and listen() during __init__() to fix this race condition.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-10-jsnow@redhat.com
[Expanded commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Add start_server() and accept() methods that can be used instead of
start_server_and_accept() to allow more fine-grained control over the
incoming connection process.
(Eagle-eyed reviewers will surely notice that it's a bit weird that
"CONNECTING" is a state that's shared between both the start_server()
and connect() states. That's absolutely true, and it's very true that
checking on the presence of _accepted as an indicator of state is a
hack. That's also very certainly true. But ... this keeps client code an
awful lot simpler, as it doesn't have to care exactly *how* the
connection is being made, just that it *is*. Is it worth disrupting that
simplicity in order to provide a better state guard on `accept()`? Hm.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Before we allow the full separation of starting the server and accepting
new connections, make sure that the disconnect cleans up the server and
its new state, too.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Refactor _do_accept() into _do_start_server() and _do_accept(). As of
this commit, the former calls the latter, but in subsequent commits
they'll be split apart.
(So please forgive the misnomer for _do_start_server(); it will live up
to its name shortly, and the docstring will be updated then too. I'm
just cutting down on some churn.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
I would really like to keep this under 1000 lines, I promise. Doesn't
look like it's gonna happen.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
As part of disentangling the monolithic nature of _do_accept(), split
out the incoming callback to prepare for factoring out the "wait for a
peer" step. Namely, this means using an event signal we can wait on from
outside of this method.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
These two methods attempted to entirely envelop the logic of
establishing a connection to a peer start to finish. However, we need to
break apart the incoming connection step into more granular steps. We
will no longer be able to reasonably constrain the logic inside of these
helper functions.
So, remove them - with _session_guard(), they no longer serve a real
purpose.
Although the public API doesn't change, the internal API does. Now that
there are no intermediary methods between e.g. connect() and
_do_connect(), there's no hook where the runstate is set. As a result,
the test suite changes a little to cope with the new semantics of
_do_accept() and _do_connect().
Lastly, take some pieces of the now-deleted docstrings and move
them up to the public interface level. They were a little more detailed,
and it won't hurt to keep them.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Previously, I had a method named "accept()" that under-the-hood calls
bind(2), listen(2) *and* accept(2). I meant this as a simplification and
counterpart to the one-shot "connect()" method.
This is confusing to readers who expect accept() to mean *just*
accept(2). Since I need to split apart the "accept()" method into
multiple methods anyway (one of which strongly resembling accept(2)), it
feels pertinent to rename this method *now*.
Rename this all-in-one method "start_server_and_accept()" instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
In _new_session, there's a fairly complex except clause that's used to
give semantic errors to callers of accept() and connect(). We need to
create a new two-step replacement for accept(), so factoring out this
piece of logic will be useful.
Bolster the comments and docstring here to try and demystify what's
going on in this fairly delicate piece of Python magic.
(If we were using Python 3.7+, this would be an @asynccontextmanager. We
don't have that very nice piece of magic, however, so this must take an
Awaitable to manage the Exception contexts properly. We pay the price
for platform compatibility.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Since the previous commit 9ea89876f9d ("target/mips: Fix cycle
counter timing calculations"), MIPSCPU::cp0_count_rate is not
used anymore. We don't need it since it is already expressed
as mips_def_t::CCRes. Remove the duplicate and clean.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <>20211213102340.1847248-1-f4bug@amsat.org>
The cp0_count_ns value is calculated from the CP0_COUNT_RATE_DEFAULT
constant in target/mips/cpu.c. The cycle counter resolution is defined
per-CPU in target/mips/cpu-defs.c.inc; use this value for calculating
cp0_count_ns. Fixings timing problems on guest OSs for the 20Kc CPU
which has a CCRes of 1.
Signed-off-by: Simon Burge <simonb@NetBSD.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211213135125.18378-1-simonb@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- Use CPUArchState as an abstract type, defined by each target
(CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code).
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmIlQmcACgkQ4+MsLN6t
wN59LRAAv69CO8UQj3FJs3igxVFrygcoYb9ywHd69tShLPrBo3204dHph67xzYDw
yZwTAftpVvoLsveQGivrMIl76f0Sg2RmxNgcIWQsPwYC9PI4BPbnZpRA7s4o5eZA
kLsSMEdhQoEAwysunu6uQMpbz7ZB5w2opb+hB++63khgsz+tyoCnsbxn7DVIgmX8
qg3N/SqFxsptf7NVNIAR7S6LmuW2ii7FnkvG4pO4fqW22omgXsw2Cj/KL+j2vaPX
GSMEX2ugEh77AKROr9OiXkLmiLaaF2BWQOlgOEKLfUE3nGaTtqGl3Wd8fv3FYVgH
a4g9+ceEDnTzW+hLQoWn8XKAKuC00pXZNTh/4iqR7gkah+rIdxtVLSN6YEHu5dr+
EQRdNJdJqHUTjtuuq9UF7U9NZuDgESmOqloIpBMkgDfgd+PoWvjnc+kjy4x3Wfog
3+cV62Cb91oHVMzSVskeeO/TEDxUFI4Zl18SR3M6MLUBANFW1YPNDUqSqN8zLdmd
w0ehd6+PBplH7JlWcdd2cam+4chO9tv0MrBD7Ty1UitDiFEP1oSkEyRzoHa8cUcb
Rz7Aa9noQJ6jSjrYaVoYcENnQxtdJd9utcQFY28M8PtOJrw7HRMtS8WQi0nsRcWq
o6NJ/58EJ/SAGH1+qX+LTr/IUmnFiW1XhEWpJoUjb+lmmCfdtOM=
=bOxK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd/tags/abstract-arch-cpu-20220307' into staging
- Re-org accel/ and softmmu/ to have more target-agnostic objects.
- Use CPUArchState as an abstract type, defined by each target
(CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code).
# gpg: Signature made Sun 06 Mar 2022 23:23:19 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/abstract-arch-cpu-20220307: (33 commits)
accel/tcg: Remove pointless CPUArchState casts
target/i386: Remove pointless CPUArchState casts
target: Use ArchCPU as interface to target CPU
target: Introduce and use OBJECT_DECLARE_CPU_TYPE() macro
target: Use CPUArchState as interface to target-specific CPU state
target: Use forward declared type instead of structure type
target/hexagon: Add missing 'hw/core/cpu.h' include
target: Include missing 'cpu.h'
Hexagon (target/hexagon) convert to OBJECT_DECLARE_TYPE
target/i386/tcg/sysemu: Include missing 'exec/exec-all.h' header
cpu: Add missing 'exec/exec-all.h' and 'qemu/accel.h' headers
exec/cpu_ldst: Include 'cpu.h' to get target_ulong definition
meson: Display libfdt as disabled when system emulation is disabled
softmmu: Build target-agnostic objects once
softmmu: Add qemu_init_arch_modules()
exec/cpu: Make address_space_init/reloading_memory_map target agnostic
exec/gdbstub: Make gdb_exit() / gdb_set_stop_cpu() target agnostic
misc: Add missing "sysemu/cpu-timers.h" include
misc: Remove unnecessary "sysemu/cpu-timers.h" include
softmmu/cpu-timers: Remove unused 'exec/exec-all.h' header
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The old image did not have python3 yet, and thus was not usable
for compiling QEMU anymore.
Suggested-by: Alexander von Gluck IV <kallisti5@unixzen.com>
Message-Id: <20220216154208.2985103-1-kallisti5@unixzen.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The BootLinux tests are currently failing with an ugly python
stack trace on my RHEL8 system since they cannot get a free port
(likely due to the firewall settings on my system). Let's properly
check the return value of find_free_port() instead and cancel the
test gracefully if it cannot get a free port.
Message-Id: <20220228114325.818294-1-thuth@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
- New fleecing backup scheme
- iotest fixes
- Fixes for the curl block driver
- Fix for the preallocate block driver
- IDE fix for zero-length TRIM requests
-----BEGIN PGP SIGNATURE-----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=OH/S
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hreitz-gitlab/tags/pull-block-2022-03-07' into staging
Block patches for 7.0-rc0:
- New fleecing backup scheme
- iotest fixes
- Fixes for the curl block driver
- Fix for the preallocate block driver
- IDE fix for zero-length TRIM requests
# gpg: Signature made Mon 07 Mar 2022 10:33:31 GMT
# gpg: using RSA key CB62D7A0EE3829E45F004D34A1FA40D098019CDF
# gpg: issuer "hreitz@redhat.com"
# gpg: Good signature from "Hanna Reitz <hreitz@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: CB62 D7A0 EE38 29E4 5F00 4D34 A1FA 40D0 9801 9CDF
* remotes/hreitz-gitlab/tags/pull-block-2022-03-07: (23 commits)
iotests/image-fleecing: test push backup with fleecing
iotests/image-fleecing: add test case with bitmap
iotests.py: add qemu_io_pipe_and_status()
iotests/image-fleecing: add test-case for fleecing format node
block: copy-before-write: realize snapshot-access API
block: introduce snapshot-access block driver
block/io: introduce block driver snapshot-access API
block/reqlist: add reqlist_wait_all()
block/dirty-bitmap: introduce bdrv_dirty_bitmap_status()
block/reqlist: reqlist_find_conflict(): use ranges_overlap()
block: intoduce reqlist
block/block-copy: add block_copy_reset()
block/copy-before-write: add bitmap open parameter
block/block-copy: block_copy_state_new(): add bitmap parameter
block/dirty-bitmap: bdrv_merge_dirty_bitmap(): add return value
block/block-copy: move copy_bitmap initialization to block_copy_state_new()
iotests: Write test output to TEST_DIR
tests/qemu-iotests/testrunner: Quote "case not run" lines in TAP mode
tests/qemu-iotests/040: Skip TestCommitWithFilters without 'throttle'
block: fix preallocate filter: don't do unaligned preallocate requests
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG,
disable this feature for machine versions prior to 7.0.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This provides standard look and feel for the about panel and reduces
code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220227042241.1543-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The trace_gicv3_icv_hppir_read trace event takes an integer value
which it uses to form the register name, which should be either
ICV_HPPIR0 or ICV_HPPIR1. We were passing in the 'grp' variable for
this, but that is either GICV3_G0 or GICV3_G1NS, which happen to be 0
and 2, which meant that tracing for the ICV_HPPIR1 register was
incorrectly printed as ICV_HPPIR2.
Use the same approach we do for all the other similar trace events,
and pass in 'ri->crm == 8 ? 0 : 1', deriving the index value
directly from the ARMCPRegInfo struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-6-peter.maydell@linaro.org
We forgot a space in some log messages, so the output ended
up looking like
gicv3_dist_write: invalid guest write at offset 0000000000008000size 8
with a missing space before "size". Add the missing spaces.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-5-peter.maydell@linaro.org
The GICv3 has some registers that support byte accesses, and some
that support 8-byte accesses. Our TCG implementation implements all
of this, switching on the 'size' argument and handling the registers
that must support reads of that size while logging an error for
attempted accesses to registers that do not support that size access.
However we forgot to tell the core memory subsystem about this by
specifying the .impl and .valid fields in the MemoryRegionOps struct,
so the core was happily simulating 8 byte accesses by combining two 4
byte accesses. This doesn't have much guest-visible effect, since
there aren't many 8 byte registers and they all support being written
in two 4 byte parts.
Set the .impl and .valid fields to say that all sizes from 1 to 8
bytes are both valid and implemented by the device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-4-peter.maydell@linaro.org
For debugging guest use of the ITS, it can be helpful to trace
when the ITS reads and writes the in-memory tables.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-3-peter.maydell@linaro.org
When debugging code that's using the ITS, it's helpful to
see tracing of the ITS commands that the guest executes. Add
suitable trace events.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-2-peter.maydell@linaro.org
For VLD3 (single 3-element structure to one lane), there is no
alignment specification and the alignment bits in the instruction
must be zero. This is bit [4] for the size=0 and size=1 cases, and
bits [5:4] for the size=2 case. We do this check correctly in
VLDST_single(), but we write it a bit oddly: in the 'case 3' code we
check for bit 0 of a->align (bit [4] of the insn), and then we fall
through to the 'case 2' code which checks bit 1 of a->align (bit [5]
of the insn) in the size 2 case. Replace this with just checking "is
a->align non-zero" for VLD3, which lets us drop the fall-through and
put the cases in this switch in numerical order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-3-peter.maydell@linaro.org
For VLD1/VST1 (single element to one lane) we are only accessing one
register, and so the 'stride' is meaningless. The bits that would
specify stride (insn bit [4] for size=1, bit [6] for size=2) are
specified to be zero in the encoding (which would correspond to a
stride of 1 for VLD2/VLD3/VLD4 etc), and we must UNDEF if they are
not.
We failed to make this check, which meant that we would incorrectly
handle some instruction patterns as loads or stores instead of
UNDEFing them. Enforce that stride == 1 for the nregs == 1 case.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/890
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303113741.2156877-2-peter.maydell@linaro.org
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
qemu_vfree() is the companion free function to qemu_memalign(); put
it in memalign.c so the allocation and free functions are together.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220226180723.1706285-9-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Instead of assuming that all CONFIG_BSD have valloc() and anything
else is memalign(), explicitly check for those functions in
meson.build and use the "is the function present" define. Tests for
specific functionality are better than which-OS checks; this also
lets us give a helpful error message if somehow there's no usable
function present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-8-peter.maydell@linaro.org
The qemu_try_memalign() functions for POSIX and Windows used to be
significantly different, but these days they are identical except for
the actual allocation function called, and the POSIX version already
has to have ifdeffery for different allocation functions.
Move to a single implementation in memalign.c, which uses the Windows
_aligned_malloc if we detect that function in meson.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220226180723.1706285-7-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently we incorrectly think that posix_memalign() exists on
Windows. This is because of a combination of:
* the msys2/mingw toolchain/libc claim to have a
__builtin_posix_memalign when there isn't a builtin of that name
* meson will assume that if you have a __builtin_foo that
counts for has_function('foo')
Specifying a specific include file via prefix: causes meson to not
treat builtins as sufficient and actually look for the function
itself; see this meson pull request which added that as the official
way to get the right answer:
https://github.com/mesonbuild/meson/pull/1150
Currently this misdectection doesn't cause problems because we only
use CONFIG_POSIX_MEMALIGN in oslib-posix.c; however that will change
in a following commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220226180723.1706285-6-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Currently qemu_try_memalign()'s behaviour if asked to allocate
0 bytes is rather variable:
* on Windows, we will assert
* on POSIX platforms, we get the underlying behaviour of
the posix_memalign() or equivalent function, which may be
either "return a valid non-NULL pointer" or "return NULL"
Explictly check for 0 byte allocations, so we get consistent
behaviour across platforms. We handle them by incrementing the size
so that we return a valid non-NULL pointer that can later be passed
to qemu_vfree(). This is permitted behaviour for the
posix_memalign() API and is the most usual way that underlying
malloc() etc implementations handle a zero-sized allocation request,
because it won't trip up calling code that assumes NULL means an
error. (This includes our own qemu_memalign(), which will abort on
NULL.)
This change is a preparation for sharing the qemu_try_memalign() code
between Windows and POSIX.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We implement qemu_memalign() in both oslib-posix.c and oslib-win32.c,
but the two versions are essentially the same: they call
qemu_try_memalign(), and abort() after printing an error message if
it fails. The only difference is that the win32 version prints the
GetLastError() value whereas the POSIX version prints
strerror(errno). However, this is a bug in the win32 version: in
commit dfbd0b873a in 2020 we changed the implementation of
qemu_try_memalign() from using VirtualAlloc() (which sets the
GetLastError() value) to using _aligned_malloc() (which sets errno),
but didn't update the error message to match.
Replace the two separate functions with a single version in a
new memalign.c file, which drops the unnecessary extra qemu_oom_check()
function and instead prints a more useful message including the
requested size and alignment as well as the errno string.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220226180723.1706285-4-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The qemu_oom_check() function, which we define in both oslib-posix.c
and oslib-win32.c, is now used only locally in that file; make it
static.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-3-peter.maydell@linaro.org
API doc comments in QEMU are supposed to be in kerneldoc format, so
convert API doc comments from Doxygen format to kerneldoc format.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <2e2d46a402560f155de322d95789ba107d728885.1646314856.git.qemu_oss@crudebyte.com>
API doc comments in QEMU are supposed to be in kerneldoc format, so
drop Doxygen format used on v9fs_co_run_in_worker() macro.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <a8fdf0290d1e40a68f5577f29aeae12298b70733.1646314856.git.qemu_oss@crudebyte.com>
API doc comments in QEMU are supposed to be in kerneldoc format, so
convert API doc comments from Doxygen format to kerneldoc format.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <dc1c4a85e233f5884ee5f6ec96b87db286083df7.1646314856.git.qemu_oss@crudebyte.com>
API doc comments in QEMU are supposed to be in kerneldoc format, so
convert API doc comments from Doxygen format to kerneldoc format.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4ece6ffa4465c271c6a7c42a3040f42780fcce87.1646314856.git.qemu_oss@crudebyte.com>
API doc comments in QEMU are supposed to be in kerneldoc format, so
convert API doc comments from Doxygen format to kerneldoc format.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <c76be7d38ea448c6417b2ffb5ccd6b711519a878.1646314856.git.qemu_oss@crudebyte.com>
API doc comments in QEMU are supposed to be in kerneldoc format, so
convert API doc comments from Doxygen format to kerneldoc format.
Based-on: <E1nPTwO-0006pl-Np@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <2b8f91de7bac3d3bc85d60eb08830a35a394be75.1646314856.git.qemu_oss@crudebyte.com>
API doc comments in QEMU are supposed to be in kerneldoc format, so drop
occurrences of "@c" which is Doxygen format for fixed-width text.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA89+ENOM6x19OEF53Kd2DWkhN5SN21Va0D7yepJSa3Jyg@mail.gmail.com/
Based-on: <E1nP9Oz-00043L-KJ@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1nPTwO-0006pl-Np@lizzy.crudebyte.com>
Function qemu_dirent_dup() is currently only used by 9pfs server, so move
it from project global header osdep.h to 9pfs specific header 9p-util.h.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA_=HAUNomKD2wurSVaAHa5mrk22A1oHKLWUDjk7v6Khmg@mail.gmail.com/
Based-on: <20220227223522.91937-12-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <E1nP9Oz-00043L-KJ@lizzy.crudebyte.com>
To allow VirtFS on darwin, we need to check that pthread_fchdir_np is
available, which has only been available since macOS 10.12.
Additionally, virtfs_proxy_helper is disabled on Darwin. This patch
series does not currently provide an implementation of the proxy-helper,
but this functionality could be implemented later on.
Signed-off-by: Keno Fischer <keno@juliacomputing.com>
[Michael Roitzsch: - Rebase for NixOS]
Signed-off-by: Michael Roitzsch <reactorcontrol@icloud.com>
[Will Cohen: - Rebase to master]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Will Cohen: - Add check for pthread_fchdir_np to virtfs
- Add comments to patch commit
- Note that virtfs_proxy_helper does not work
on macOS
- Fully adjust meson virtfs error note to specify
macOS
- Rebase to master]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Message-Id: <20220227223522.91937-12-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The previous test depended on the assumption that P9_DOTL_AT_REMOVEDIR
and AT_REMOVEDIR have the same value.
While this is true on Linux, it is not true everywhere, and leads to an
incorrect test failure on unlink_at, noticed when adding 9p to darwin:
Received response 7 (RLERROR) instead of 77 (RUNLINKAT)
Rlerror has errno 22 (Invalid argument)
**
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77) Bail out!
ERROR:../tests/qtest/virtio-9p-test.c:305:v9fs_req_recv: assertion
failed (hdr.id == id): (7 == 77)
Signed-off-by: Fabian Franz <fabianfranz.oss@gmail.com>
[Will Cohen: - Add explanation of patch and description
of pre-patch test failure]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Acked-by: Thomas Huth <thuth@redhat.com>
[Will Cohen: - Move this patch before 9p: darwin: meson
patch to avoid qtest breakage during
bisecting]
Signed-off-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20220227223522.91937-11-wwcohen@gmail.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>