ast1030 tmc(timer controller) is identical to ast2600 tmc.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-6-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 wdt controller is similiar to AST2600's wdt, but it has extra
registers.
Introduce ast1030 object class and increse the number of regs(offset) of
ast1030 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-5-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast2500_2520_datasheet_v1.8 and ast2600v11.pdf, the default value of
WDT00 and WDT04 is 0x014FB180 for ast2500/ast2600.
Add default_status and default_reload_value attributes for storing
counter status and reload value as they are different from ast2400.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-4-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST1030 spi controller's address decoding unit is 1MB that is identical
to ast2600, but fmc address decoding unit is 512kb.
Introduce seg_to_reg and reg_to_seg handlers for ast1030 fmc controller.
In addition, add ast1030 fmc, spi1, and spi2 class init handler.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-3-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Per ast1030_v7.pdf, AST1030 ADC engine is identical to AST2600's ADC.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220401083850.15266-2-jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Guest code (u-boot) pokes at this on boot. No functionality is required
for guest code to work correctly, but it helps to document the region
being read from.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220318092211.723938-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In order to correctly report secure boot running firmware, these values
must be set. They are taken from a running machine when secure boot is
enabled.
We don't yet have documentation from ASPEED on what they mean. Set the
raw values for now, and in the future improve the model with properties
to set these on a per-machine basis.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220310052159.183975-1-joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600 clkin is always 25MHz, introduce clkin_25Mhz attribute
for aspeed_scu_get_clkin() to return the correct clkin for ast2600.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220315075753.8591-3-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
AST2600's HPLL register offset and bit definition are different from
AST2500. Add a hpll calculation function and an apb frequency calculation
function based on SCU200 register description in ast2600v11.pdf.
Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: checkpatch fixes ]
Message-Id: <20220315075753.8591-2-steven_lee@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
qemu_mknodat() is expected to behave according to its POSIX API, and
therefore should always return exactly -1 on any error, and errno
should be set for the actual error code.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <c714b5e1cae225ab7575242c45ee0fe4945eb6ad.1651228001.git.qemu_oss@crudebyte.com>
When mapped POSIX ACL is used, we are ignoring errors when trying
to remove a POSIX ACL xattr that does not exist. On Linux hosts we
would get ENODATA in such cases, on macOS hosts however we get
ENOATTR instead.
As we can be sure that ENOATTR is defined as being identical on Linux
hosts (at least by qemu/xattr.h), it is safe to fix this issue by
simply comparing against ENOATTR instead of ENODATA.
This patch fixes e.g. a command on Linux guest like:
cp --preserve=mode old new
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Link: https://lore.kernel.org/qemu-devel/2866993.yOYK24bMf6@silver/
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <34f81e9bffd7a3e65fb7aab5b56c107bd0aac960.1651228001.git.qemu_oss@crudebyte.com>
Linux and macOS only share some errno definitions with equal macro
name and value. In fact most mappings for errno are completely
different on the two systems.
This patch converts some important errno values from macOS host to
corresponding Linux errno values before eventually sending such error
codes along with 'Rlerror' replies (if 9p2000.L is used that is). Not
having translated errnos before violated the 9p2000.L protocol spec,
which says:
"
size[4] Rlerror tag[2] ecode[4]
... ecode is a numerical Linux errno.
"
https://github.com/chaos/diod/wiki/protocol#lerror----return-error-code
This patch fixes a bunch of misbehaviours when running a Linux client
on macOS host. For instance this patch fixes:
mount -t 9p -o posixacl ...
on Linux guest if security_mode=mapped was used for 9p server, which
refused to mount successfully, because macOS returned ENOATTR==93
when client tried to retrieve POSIX ACL xattrs, because errno 93
is defined as EPROTONOSUPPORT==93 on Linux, so Linux client believed
that xattrs were not supported by filesystem on host in general.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Link: https://lore.kernel.org/qemu-devel/20220421124835.3e664669@bahia/
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <b322ab298a62069e527d2b032028bdc9115afacd.1651228001.git.qemu_oss@crudebyte.com>
The 'rdev' field in 9p reponse 'Rgetattr' is of type dev_t,
which is actually a system dependant type and therefore both the
size and encoding of dev_t differ between macOS and Linux.
So far we have sent 'rdev' to guest in host's dev_t format as-is,
which caused devices to appear with wrong device numbers on
guests running on macOS hosts, eventually leading to various
misbehaviours on guest in conjunction with device files.
This patch fixes this issue by converting the device number from
host's dev_t format to Linux dev_t format. As 9p request
'Tgettattr' is exclusive to protocol version 9p2000.L, it should
be fair to assume that 'rdev' field is assumed to be in Linux dev_t
format by client as well.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Link: https://lore.kernel.org/qemu-devel/20220421093056.5ab1e7ed@bahia/
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <b3a430c2c382ba69a7405e04c0b090ab0d86f17e.1651228001.git.qemu_oss@crudebyte.com>
mknod() on macOS does not support creating sockets, so divert to
call sequence socket(), bind() and fchmodat() respectively if S_IFSOCK
was passed with mode argument.
Link: https://lore.kernel.org/qemu-devel/17933734.zYzKuhC07K@silver/
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <2e7b5ecd7a6d83a538db4e8a22d8fb03e9e0f06e.1651228001.git.qemu_oss@crudebyte.com>
[C.S. - Use AT_SYMLINK_NOFOLLOW instead of AT_SYMLINK_NOFOLLOW_ANY. ]
Link: https://lore.kernel.org/qemu-devel/3704033.BMyLRrx2Jx@silver/
mknod() on macOS does not support creating regular files, so
divert to openat_file() if S_IFREG is passed with mode argument.
Furthermore, 'man 2 mknodat' on Linux says: "Zero file type is
equivalent to type S_IFREG".
Link: https://lore.kernel.org/qemu-devel/17933734.zYzKuhC07K@silver/
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Will Cohen <wwcohen@gmail.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-Id: <3102ca936f88bc1f79d2a325e5bc68f48f54e6e3.1651228000.git.qemu_oss@crudebyte.com>
The 'synth' driver's root node and the 'synth' driver's first
subdirectory node falsely share the same inode number (zero), which
makes it impossible for 9p clients (i.e. 9p test cases) to distinguish
root node and first subdirectory from each other by comparing their QIDs
(which are derived by 9p server from driver's inode numbers).
Fix this issue by using prefix-increment instead of postfix-increment
operator while generating new inode numbers for subdirectories and files.
Link: https://lore.kernel.org/qemu-devel/3859307.hTDP4D0zbi@silver/
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1nTpyU-0000yR-9o@lizzy.crudebyte.com>
Imply the TPM sysbus devices. This allows users to add TPM devices to
the RISC-V virt board.
This was tested by first creating an emulated TPM device:
swtpm socket --tpm2 -t -d --tpmstate dir=/tmp/tpm \
--ctrl type=unixio,path=swtpm-sock
Then launching QEMU with:
-chardev socket,id=chrtpm,path=swtpm-sock \
-tpmdev emulator,id=tpm0,chardev=chrtpm \
-device tpm-tis-device,tpmdev=tpm0
The TPM device can be seen in the memory tree and the generated device
tree.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/942
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-7-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add support for plugging in devices, this was tested with the TPM
device.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-6-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Similar to the ARM virt machine add support for adding device tree
entries for dynamically created devices.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-Id: <20220427234146.1130752-5-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Create a platform bus to allow dynamic devices to be connected. This is
based on the ARM implementation.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-4-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The ARM virt machine currently uses sysbus-fdt to create device tree
entries for dynamically created MMIO devices.
The RISC-V virt machine can also benefit from this, so move the code to
the core directory.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move the binary and device tree loading code to the machine done
notifier. This allows us to prepare for editing the device tree as part
of the notifier.
This is based on similar code in the ARM virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220427234146.1130752-2-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7c28f4da20 ("RISC-V: Don't add NULL bootargs to device-tree")
tried to avoid adding *NULL* bootargs to device tree, but unfortunately
the changes were entirely useless, due to MachineState::kernel_cmdline
can't be NULL at all as the default value is given as an empty string.
(see hw/core/machine.c::machine_initfn()).
Note the wording of *NULL* bootargs is wrong. It can't be NULL otherwise
a segfault had already been observed by dereferencing the NULL pointer.
It should be worded as *empty" bootargs.
Fixes: 7c28f4da20 ("RISC-V: Don't add NULL bootargs to device-tree")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421055629.1177285-2-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
At present the adding '/chosen/stdout-path' property in device tree
is determined by whether a kernel command line is provided, which is
wrong. It should be added unconditionally.
Fixes: 8d8897accb ("hw/riscv: spike: Allow using binary firmware as bios")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220421055629.1177285-1-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
-----BEGIN PGP SIGNATURE-----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=IPEn
-----END PGP SIGNATURE-----
Merge tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* refactor to use tcg_constant where appropriate
* Advertise support for FEAT_TTL and FEAT_BBM level 2
* smmuv3: Cache event fault record
* smmuv3: Add space in guest error message
* smmuv3: Advertise support for SMMUv3.2-BBML2
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmJqpu4ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3pOQD/9G190+ntJm4Vndz0I6bCDP
# svDrWwsioOJ4q5Pah6517JACkwN5sx0adMGyAeRC3Kcbz5B2141vv9hJOnJmLB1D
# l6KbH8XZaftC0B8fXsPkaH6XEdBHGz6YbOZaLOTwmFqF9d18OFW4d8+CAvfldZRc
# +DYeolEhoL9eLTS16BlXPxb0LajQHhbN1Xdu3t8CGh31C52ZrG4h8cus6YMEDjfA
# rfBthh/2QvVFmDedIfX4QrlImCTs+bTaSkhUBmX6qakWII0QykItgQTEZ8IHEr8/
# QmG+xlkP1MmffyHU3F4inEVXpjCSzula4ycZpNVGsrTHYxLBzsTSD+EzicLHMZSt
# 64tQhLxPjAzC1MEHp7bJHyQXon7REWd6u1jPRlMWTGpZqbMMchBPjFrsxK3YPdvi
# a/8KIulXuX+GjzbOIHnpttIy+U0UrjTEyxjpk+Ay2iZ+U6+hA3i2ni++dzq9dYb6
# IiCl+o29r/7fNaWpG3b38kn9vpxjwAAw+qfwwSqyM+8/KMirgJ8rpEmUPei/h7fy
# vqpNlVxd1+Tzb3ljCXNRriZ05xo5I9LIb+dLAig1orENS7w3SzW/GnM+S7raOwQb
# u9mxNmbQJ1MhkjNC/6wzniBre6EBs31X2GIWeuiWe/js2YFPQC06b1WwIc/bYNUv
# anbECOS34mtxbExFfdlxUQ==
# =IPEn
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 28 Apr 2022 07:38:38 AM PDT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [full]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [full]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [full]
* tag 'pull-target-arm-20220428' of https://git.linaro.org/people/pmaydell/qemu-arm: (54 commits)
hw/arm/smmuv3: Advertise support for SMMUv3.2-BBML2
target/arm: Advertise support for FEAT_BBM level 2
target/arm: Advertise support for FEAT_TTL
hw/arm/smmuv3: Add space in guest error message
hw/arm/smmuv3: Cache event fault record
target/arm: Use field names for accessing DBGWCRn
target/arm: Disable cryptographic instructions when neon is disabled
target/arm: Use tcg_constant for vector descriptor
target/arm: Use tcg_constant for do_brk{2,3}
target/arm: Use tcg_constant for predicate descriptors
target/arm: Use tcg_constant in do_zzi_{sat, ool}, do_fp_imm
target/arm: Use tcg_constant in SUBR
target/arm: Use tcg_constant in LD1, ST1
target/arm: Use tcg_constant in WHILE
target/arm: Use tcg_constant in do_clast_scalar
target/arm: Use tcg_constant in {incr, wrap}_last_active
target/arm: Use tcg_constant in FCPY, CPY
target/arm: Use tcg_constant in SINCDEC, INCDEC
target/arm: Use tcg_constant for trans_INDEX_*
target/arm: Use tcg_constant in trans_CSEL
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The Arm SMMUv3 includes an optional feature equivalent to the CPU
FEAT_BBM, which permits an OS to switch a range of memory between
"covered by a huge page" and "covered by a sequence of normal pages"
without having to engage in the traditional 'break-before-make'
dance. (This is particularly important for the SMMU, because devices
performing I/O through an SMMU are less likely to be able to cope with
the window in the sequence where an access results in a translation
fault.) The SMMU spec explicitly notes that one of the valid ways to
be a BBM level 2 compliant implementation is:
* if there are multiple entries in the TLB for an address,
choose one of them and use it, ignoring the others
Our SMMU TLB implementation (unlike our CPU TLB) does allow multiple
TLB entries for an address, because the translation table level is
part of the SMMUIOTLBKey, and so our IOTLB hashtable can include
entries for the same address where the leaf was at different levels
(i.e. both hugepage and normal page). Our TLB lookup implementation in
smmu_iotlb_lookup() will always find the entry with the lowest level
(i.e. it prefers the hugepage over the normal page) and ignore any
others. TLB invalidation correctly removes all TLB entries matching
the specified address or address range (unless the guest specifies the
leaf level explicitly, in which case it gets what it asked for). So we
can validly advertise support for BBML level 2.
Note that we still can't yet advertise ourselves as an SMMU v3.2,
because v3.2 requires support for the S2FWB feature, which we don't
yet implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220426160422.2353158-4-peter.maydell@linaro.org
Make the translation error message prettier by adding a missing space
before the parenthesis.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220427111543.124620-2-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Record bit in the Context Descriptor tells the SMMU to report fault
events to the event queue. Since we don't cache the Record bit at the
moment, access faults from a cached Context Descriptor are never
reported. Store the Record bit in the cached SMMUTransCfg.
Fixes: 9bde7f0674 ("hw/arm/smmuv3: Implement translate callback")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20220427111543.124620-1-jean-philippe@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CONFIG_XEN_PCI_PASSTHROUGH is just a global configuration option;
it is never used in the source files, so there is no need to put
CONFIG_XEN_PCI_PASSTHROUGH in config-target.h or even in config-host.h.
This inaccuracy was copied over from the configure script in commit
8a19980e3f ("configure: move accelerator logic to meson", 2020-10-03).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't register firmware as rom, not needed (see comment).
Add x86_firmware_configure() call for proper sev initialization.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220425135051.551037-4-kraxel@redhat.com>
move sev firmware setup to separate function so it can be used from
other code paths. No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220425135051.551037-3-kraxel@redhat.com>
Switch to usual goto-end-of-function error handling style.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220425135051.551037-2-kraxel@redhat.com>
Demonstrate how to use nios2 VIC on a machine.
Introduce a new machine property to attach a VIC.
When VIC is present, let the CPU know that it should use the
External Interrupt Interface instead of the Internal Interrupt Interface.
The devices on the machine are attached to the VIC and not directly to cpu.
To allow VIC update EIC fields, we set the "cpu" property of the VIC
with a reference to the nios2 cpu.
[rth: Put a property on the 10m50-ghrd machine, rather than
create a new machine class.]
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-6-amir.gonnen@neuroblade.ai>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-63-richard.henderson@linaro.org>
Convert to contiguous allocation, as much as possible so far.
The two timer objects are not exposed for subobject allocation.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-62-richard.henderson@linaro.org>
We want to move data from the heap into Nios2MachineState,
which is not possible with DEFINE_MACHINE.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-61-richard.henderson@linaro.org>
Implement nios2 Vectored Interrupt Controller (VIC).
VIC is connected to EIC. It needs to update rha, ril, rrs and rnmi
fields on Nios2CPU before raising an IRQ.
For that purpose, VIC has a "cpu" property which should refer to the
nios2 cpu and set by the board that connects VIC.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Amir Gonnen <amir.gonnen@neuroblade.ai>
Message-Id: <20220303153906.2024748-5-amir.gonnen@neuroblade.ai>
[rth: Split out nios2_vic.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220421151735.31996-60-richard.henderson@linaro.org>
There was an off-by-1 in the qcode conversion array bounds
check.
Fixes: e709a61a8f
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It always calls the IOMMU MR translate() callback with flag=IOMMU_NONE in
memory_region_iommu_replay(). Currently, smmuv3_translate() return an
IOMMUTLBEntry with perm set to IOMMU_NONE even if the translation success,
whereas it is expected to return the actual permission set in the table
entry.
So pass the actual perm to returned IOMMUTLBEntry in the table entry.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 1650094695-121918-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the TCG GICv4 to the virt board. For the board,
the GICv4 is very similar to the GICv3, with the only difference
being the size of the redistributor frame. The changes here are thus:
* calculating virt_redist_capacity correctly for GICv4
* changing various places which were "if GICv3" to be "if not GICv2"
* the commandline option handling
Note that using GICv4 reduces the maximum possible number of CPUs on
the virt board from 512 to 317, because we can now only fit half as
many redistributors into the redistributor regions we have defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-42-peter.maydell@linaro.org
In several places in virt.c we calculate the number of redistributors that
fit in a region of our memory map, which is the size of the region
divided by the size of a single redistributor frame. For GICv4, the
redistributor frame is a different size from that for GICv3. Abstract
out the calculation of redistributor region capacity so that we have
one place we need to change to handle GICv4 rather than several.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-41-peter.maydell@linaro.org
Everywhere we need to check which GIC version we're using, we look at
vms->gic_version and use the VIRT_GIC_VERSION_* enum values, except
in create_gic(), which copies vms->gic_version into a local 'int'
variable and makes direct comparisons against values 2 and 3.
For consistency, change this function to check the GIC version
the same way we do elsewhere. This includes not implicitly relying
on the enumeration type values happening to match the integer
'revision' values the GIC device object wants.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-40-peter.maydell@linaro.org
Now that we have implemented all the GICv4 requirements, relax the
error-checking on the GIC object's 'revision' property to allow a TCG
GIC to be a GICv4, whilst still constraining the KVM GIC to GICv3.
Our 'revision' property doesn't consider the possibility of wanting
to specify the minor version of the GIC -- for instance there is a
GICv3.1 which adds support for extended SPI and PPI ranges, among
other things, and also GICv4.1. But since the QOM property is
internal to QEMU, not user-facing, we can cross that bridge when we
come to it. Within the GIC implementation itself code generally
checks against the appropriate ID register feature bits, and the
only use of s->revision is for setting those ID register bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-39-peter.maydell@linaro.org
Update the various GIC ID and feature registers for GICv4:
* PIDR2 [7:4] is the GIC architecture revision
* GICD_TYPER.DVIS is 1 to indicate direct vLPI injection support
* GICR_TYPER.VLPIS is 1 to indicate redistributor support for vLPIs
* GITS_TYPER.VIRTUAL is 1 to indicate vLPI support
* GITS_TYPER.VMOVP is 1 to indicate that our VMOVP implementation
handles cross-ITS synchronization for the guest
* ICH_VTR_EL2.nV4 is 0 to indicate direct vLPI injection support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-38-peter.maydell@linaro.org
Implement the function gicv3_redist_inv_vlpi(), which was previously
left as a stub. This is the function that does the work of the INV
command for a virtual interrupt.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220408141550.1271295-37-peter.maydell@linaro.org
