This change includes support for all AF_NETLINK socket options up to about
kernel version 5.4 (5.4 is not formally released at the time of writing).
Socket options that were introduced in kernel versions before the oldest
currently stable kernel version are guarded by kernel version macros.
This change has been built under gcc 8.3, and clang 9.0, and it passes
`make check`. The netlink options have been tested by emulating some
non-trival software that uses NETLINK socket options, but they have
not been exaustively verified.
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20191029224310.164025-1-jkz@google.com>
[lv: updated patch according to CODING_STYLE]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
PCIe requester IDs are used by modern IOMMUs to differentiate devices
in order to provide a unique IOVA address space per device. These
requester IDs are composed of the bus/device/function (BDF) of the
requesting device. Conventional PCI pre-dates this concept and is
simply a shared parallel bus where transactions are claimed by
decoding target ranges rather than the packetized, point-to-point
mechanisms of PCI-express. In order to interface conventional PCI
to PCIe, the PCIe-to-PCI bridge creates and accepts packetized
transactions on behalf of all downstream devices, using one of two
potential forms of a requester ID relating to the bridge itself or its
subordinate bus. All downstream devices are therefore aliased by the
bridge's requester ID and it's not possible for the IOMMU to create
unique IOVA spaces for devices downstream of such buses.
At least that's how it works on bare metal. Until now point we've
ignored this nuance of vIOMMU support in QEMU, creating a unique
AddressSpace per device regardless of the virtual bus topology.
Aside from simply being true to bare metal behavior, there are aspects
of a shared address space that we can use to our advantage when
designing a VM. For instance, a PCI device assignment scenario where
we have the following IOMMU group on the host system:
$ ls /sys/kernel/iommu_groups/1/devices/
0000:00:01.0 0000:01:00.0 0000:01:00.1
An IOMMU group is considered the smallest set of devices which are
fully DMA isolated from other devices by the IOMMU. In this case the
root port at 00:01.0 does not guarantee that it prevents peer to peer
traffic between the endpoints on bus 01: and the devices are therefore
grouped together. VFIO considers an IOMMU group to be the smallest
unit of device ownership and allows only a single shared IOVA space
per group due to the limitations of the isolation.
Therefore, if we attempt to create the following VM, we get an error:
qemu-system-x86_64 -machine q35... \
-device intel-iommu,intremap=on \
-device pcie-root-port,addr=1e.0,id=pcie.1 \
-device vfio-pci,host=1:00.0,bus=pcie.1,addr=0.0,multifunction=on \
-device vfio-pci,host=1:00.1,bus=pcie.1,addr=0.1
qemu-system-x86_64: -device vfio-pci,host=1:00.1,bus=pcie.1,addr=0.1: vfio \
0000:01:00.1: group 1 used in multiple address spaces
VFIO only allows a single IOVA space (AddressSpace) for both devices,
but we've placed them into a topology where the vIOMMU expects a
separate AddressSpace for each device. On bare metal we know that
a conventional PCI bus would provide the sort of aliasing we need
here, forcing the IOMMU to consider these devices to be part of a
single shared IOVA space. The support provided here does the same
for QEMU, such that we can create a conventional PCI topology to
expose equivalent AddressSpace sharing requirements to the VM:
qemu-system-x86_64 -machine q35... \
-device intel-iommu,intremap=on \
-device pcie-pci-bridge,addr=1e.0,id=pci.1 \
-device vfio-pci,host=1:00.0,bus=pci.1,addr=1.0,multifunction=on \
-device vfio-pci,host=1:00.1,bus=pci.1,addr=1.1
There are pros and cons to this configuration; it's not necessarily
recommended, it's simply a tool we can use to create configurations
which may provide additional functionality in spite of host hardware
limitations or as a benefit to the guest configuration or resource
usage. An incomplete list of pros and cons:
Cons:
a) Extended PCI configuration space is unavailable to devices
downstream of a conventional PCI bus. The degree to which this
is a drawback depends on the device and guest drivers.
b) Applying this topology to devices which are already isolated by
the host IOMMU (singleton IOMMU groups) will result in devices
which appear to be non-isolated to the VM (non-singleton groups).
This can limit configurations within the guest, such as userspace
drivers or nested device assignment.
Pros:
a) QEMU better emulates bare metal.
b) Configurations as above are now possible.
c) Host IOMMU resources and VM locked memory requirements are reduced
in vIOMMU configurations due to shared IOMMU domains on the host
and avoidance of duplicate locked memory accounting.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <157187083548.5439.14747141504058604843.stgit@gimli.home>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory block commands are only supported for linux with sysfs,
"guest-get-memory-block-info" was not in blacklist for other
cases.
Reported on:
https://bugzilla.redhat.com/show_bug.cgi?id=1751431
Signed-off-by: Basil Salman <bsalman@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Network interface name is fetched as an encoded WCHAR array, (wide
character), then it is decoded using the guest's CP_ACP Windows code
page, which is the default code page as configure in the guest's
Windows, then it is returned as a byte array, (char array).
As stated in the BZ#1733165, when renaming a network interface to a
Chinese name and invoking this command, the returned name field has
the (\ufffd) value for each Chinese character the name had, this
value is an indication that the code page does not have the decoding
information for the given character.
This bug is a result of using the CP_ACP code page for decoding which
is an interchangeable code page, instead CP_UTF8 code page should be
used for decoding the network interface's name.
https://bugzilla.redhat.com/show_bug.cgi?id=1733165
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The XFS kernel driver has a bug that may cause data corruption for qcow2
images as of qemu commit c8bb23cbdb. We can work around it by
treating post-EOF fallocates as serializing up until infinity (INT64_MAX
in practice).
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191101152510.11719-4-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make both bdrv_mark_request_serialising() and
bdrv_wait_serialising_requests() public so they can be used from block
drivers.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191101152510.11719-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
0e2402452f allowed writes larger than cluster, but that's
unsupported for compressed write. Fix it.
Fixes: 0e2402452f
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191029150934.26416-1-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Fix the offset of the NSSRS field the CAP register.
From NVME 1.4, section 3 ("Controller Registers"), subsection 3.1.1
("Offset 0h: CAP – Controller Capabilities") CAP_NSSRS_SHIFT is bit 36,
not 33.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reported-by: Javier Gonzalez <javier.gonz@samsung.com>
Message-id: 20191023073315.446534-1-its@irrelevant.dk
Reviewed-by: John Snow <jsnow@redhat.com>
[mreitz: Added John's note on the location in the specification where
this information can be found]
Signed-off-by: Max Reitz <mreitz@redhat.com>
This contains a single patch to change my email address.
-----BEGIN PGP SIGNATURE-----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=w0iy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/palmer-for-master-4.2-sf1' into staging
Update my MAINTAINERS file entry
This contains a single patch to change my email address.
# gpg: Signature made Fri 01 Nov 2019 16:14:45 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/palmer-for-master-4.2-sf1:
MAINTAINERS: Change to my personal email address
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Support SVE in KVM guests
* Don't UNDEF on M-profile 'vmrs apsr_nzcv, fpscr'
* Update hflags after boot.c modifies CPU state
-----BEGIN PGP SIGNATURE-----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=Vxse
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191101-2' into staging
target-arm queue:
* Support SVE in KVM guests
* Don't UNDEF on M-profile 'vmrs apsr_nzcv, fpscr'
* Update hflags after boot.c modifies CPU state
# gpg: Signature made Sat 02 Nov 2019 10:38:59 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20191101-2:
target/arm: Allow reading flags from FPSCR for M-profile
hw/arm/boot: Rebuild hflags when modifying CPUState at boot
target/arm/kvm: host cpu: Add support for sve<N> properties
target/arm/cpu64: max cpu: Support sve properties with KVM
target/arm/kvm: scratch vcpu: Preserve input kvm_vcpu_init features
target/arm/kvm64: max cpu: Enable SVE when available
target/arm/kvm64: Add kvm_arch_get/put_sve
target/arm/cpu64: max cpu: Introduce sve<N> properties
target/arm: Allow SVE to be disabled via a CPU property
tests: arm: Introduce cpu feature tests
target/arm/monitor: Introduce qmp_query_cpu_model_expansion
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
rt==15 is a special case when reading the flags: it means the
destination is APSR. This patch avoids rejecting
vmrs apsr_nzcv, fpscr
as illegal instruction.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christophe Lyon <christophe.lyon@linaro.org>
Message-id: 20191025095711.10853-1-christophe.lyon@linaro.org
[PMM: updated the comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rebuild hflags when modifying CPUState at boot.
Fixes: e979972a6a
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Message-id: 20191031040830.18800-2-edgar.iglesias@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow cpu 'host' to enable SVE when it's available, unless the
user chooses to disable it with the added 'sve=off' cpu property.
Also give the user the ability to select vector lengths with the
sve<N> properties. We don't adopt 'max' cpu's other sve property,
sve-max-vq, because that property is difficult to use with KVM.
That property assumes all vector lengths in the range from 1 up
to and including the specified maximum length are supported, but
there may be optional lengths not supported by the host in that
range. With KVM one must be more specific when enabling vector
lengths.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-10-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extend the SVE vq map initialization and validation with KVM's
supported vector lengths when KVM is enabled. In order to determine
and select supported lengths we add two new KVM functions for getting
and setting the KVM_REG_ARM64_SVE_VLS pseudo-register.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-9-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_arm_create_scratch_host_vcpu() takes a struct kvm_vcpu_init
parameter. Rather than just using it as an output parameter to
pass back the preferred target, use it also as an input parameter,
allowing a caller to pass a selected target if they wish and to
also pass cpu features. If the caller doesn't want to select a
target they can pass -1 for the target which indicates they want
to use the preferred target and have it passed back like before.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-8-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable SVE in the KVM guest when the 'max' cpu type is configured
and KVM supports it. KVM SVE requires use of the new finalize
vcpu ioctl, so we add that now too. For starters SVE can only be
turned on or off, getting all vector lengths the host CPU supports
when on. We'll add the other SVE CPU properties in later patches.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are the SVE equivalents to kvm_arch_get/put_fpsimd. Note, the
swabbing is different than it is for fpsmid because the vector format
is a little-endian stream of words.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Message-id: 20191031142734.8590-6-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce cpu properties to give fine control over SVE vector lengths.
We introduce a property for each valid length up to the current
maximum supported, which is 2048-bits. The properties are named, e.g.
sve128, sve256, sve384, sve512, ..., where the number is the number of
bits. See the updates to docs/arm-cpu-features.rst for a description
of the semantics and for example uses.
Note, as sve-max-vq is still present and we'd like to be able to
support qmp_query_cpu_model_expansion with guests launched with e.g.
-cpu max,sve-max-vq=8 on their command lines, then we do allow
sve-max-vq and sve<N> properties to be provided at the same time, but
this is not recommended, and is why sve-max-vq is not mentioned in the
document. If sve-max-vq is provided then it enables all lengths smaller
than and including the max and disables all lengths larger. It also has
the side-effect that no larger lengths may be enabled and that the max
itself cannot be disabled. Smaller non-power-of-two lengths may,
however, be disabled, e.g. -cpu max,sve-max-vq=4,sve384=off provides a
guest the vector lengths 128, 256, and 512 bits.
This patch has been co-authored with Richard Henderson, who reworked
the target/arm/cpu64.c changes in order to push all the validation and
auto-enabling/disabling steps into the finalizer, resulting in a nice
LOC reduction.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since 97a28b0eea ("target/arm: Allow VFP and Neon to be disabled via
a CPU property") we can disable the 'max' cpu model's VFP and neon
features, but there's no way to disable SVE. Add the 'sve=on|off'
property to give it that flexibility. We also rename
cpu_max_get/set_sve_vq to cpu_max_get/set_sve_max_vq in order for them
to follow the typical *_get/set_<property-name> pattern.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The special value -1 means "don't reboot" for QEMU/libvirt.
Add a trivial test.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit ee5d0f89de added range checking on reboot-timeout
to only allow the range 0..65535; however both qemu and libvirt document
the special value -1 to mean don't reboot.
Allow it again.
Fixes: ee5d0f89de ("fw_cfg: Fix -boot reboot-timeout error checking")
RH bz: https://bugzilla.redhat.com/show_bug.cgi?id=1765443
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191025165706.177653-1-dgilbert@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <37ac197c-f20e-dd05-ff6a-13a2171c7148@redhat.com>
[PMD: Applied Laszlo's suggestions]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
I'm leaving SiFive in a bit less than two weeks, which means I'll be
losing my @sifive email address. I don't have my new email address yet,
so I'm switching over to my personal address.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Now that Arm CPUs have advertised features lets add tests to ensure
we maintain their expected availability with and without KVM.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20191031142734.8590-3-drjones@redhat.com
[PMM: squash in fix to avoid failure on aarch32-compat]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the query-cpu-model-expansion QMP command to Arm. We
do this selectively, only exposing CPU properties which represent
optional CPU features which the user may want to enable/disable.
Additionally we restrict the list of queryable cpu models to 'max',
'host', or the current type when KVM is in use. And, finally, we only
implement expansion type 'full', as Arm does not yet have a "base"
CPU type. More details and example queries are described in a new
document (docs/arm-cpu-features.rst).
Note, certainly more features may be added to the list of advertised
features, e.g. 'vfp' and 'neon'. The only requirement is that we can
detect invalid configurations and emit failures at QMP query time.
For 'vfp' and 'neon' this will require some refactoring to share a
validation function between the QMP query and the CPU realize
functions.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Beata Michalska <beata.michalska@linaro.org>
Message-id: 20191031142734.8590-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add QTest tests to check the logical geometry override option.
The tests in hd-geo-test are out of date - they only test IDE and do not
test interesting MBRs.
Creating qcow2 disks with specific size and MBR layout is currently
unused - we only use a default empty MBR.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Using fw_cfg, supply logical CHS values directly from QEMU to the BIOS.
Non-standard logical geometries break under QEMU.
A virtual disk which contains an operating system which depends on
logical geometries (consistent values being reported from BIOS INT13
AH=08) will most likely break under QEMU/SeaBIOS if it has non-standard
logical geometries - for example 56 SPT (sectors per track).
No matter what QEMU will report - SeaBIOS, for large enough disks - will
use LBA translation, which will report 63 SPT instead.
In addition we cannot force SeaBIOS to rely on physical geometries at
all. A virtio-blk-pci virtual disk with 255 phyiscal heads cannot
report more than 16 physical heads when moved to an IDE controller,
since the ATA spec allows a maximum of 16 heads - this is an artifact of
virtualization.
By supplying the logical geometries directly we are able to support such
"exotic" disks.
We serialize this information in a similar way to the "bootorder"
interface.
The new fw_cfg entry is "bios-geometry".
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Move device name construction to a separate function.
We will reuse this function in the following commit to pass logical CHS
parameters through fw_cfg much like we currently pass bootindex.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Relevant devices are:
* ide-hd (and ide-cd, ide-drive)
* scsi-hd (and scsi-cd, scsi-disk, scsi-block)
* virtio-blk-pci
We do not call del_boot_device_lchs() for ide-* since we don't need to -
IDE block devices do not support unplugging.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
We will need to add LCHS removal logic to scsi-hd's unrealize() in the
next commit.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Add an interface to provide direct logical CHS values for boot devices.
We will use this interface in the next commits.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Add logical geometry variables to BlockConf.
A user can now supply "lcyls", "lheads" & "lsecs" for any HD device
that supports CHS ("cyls", "heads", "secs").
These devices include:
* ide-hd
* scsi-hd
* virtio-blk-pci
In future commits we will use the provided LCHS and pass it to the BIOS
through fw_cfg to be supplied using INT13 routines.
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Peter hit a "Could not open 'TEST_DIR/t.IMGFMT': Failed to get shared
'write' lock - Is another process using the image [TEST_DIR/t.IMGFMT]?"
error with 130 already twice. Looks like this test is a little bit
shaky, and currently nobody has a real clue what could be causing this
issue, so for the time being, let's disable it from the "auto" group so
that it does not gate the pull requests.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There's an updated version of the Debian package containing the m68k
Kernel.
Now, if the package gets updated again, the test won't fail, but will
be canceled. A more permanent solution is certainly needed.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191029232320.12419-3-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The Linux kernel that is extracted from a Debian package for the q800
machine test is hosted on a "pool" location. AFAICT, it gets updated
without too much ceremony, and I don't see any archival location that
is stable enough.
For now, to avoid test errors, let's cancel the test if fetching the
package fails.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191029232320.12419-2-crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The intent is to only enable the XTS test if both CONFIG_BLOCK
and CONFIG_QEMU_PRIVATE_XTS are set to 'y'.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191030151740.14326-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Fixing tabbing in block related macros.
Signed-off-by: Sam Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Sam Eiderman <sameid@google.com>
Reviewed-by: Karl Heubaum <karl.heubaum@oracle.com>
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
It's an old compatibility shim that just delegates to ide-cd or ide-hd.
I'd like to refactor these some day, and getting rid of the super-object
will make that easier.
Either way, we don't need this.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-id: 20191009224303.10232-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Reintroduce float32_to_float64 that was removed here:
https://lists.gnu.org/archive/html/qemu-devel/2018-04/msg00455.html
- nbench test it not actually calling this function at all
- SPECS 2006 significat number of tests impoved their runtime, just
few of them showed small slowdown
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matus Kysel <mkysel@tachyum.com>
Message-Id: <20191017142133.59439-1-mkysel@tachyum.com>
[rth: Add comment about impossible inexact exceptions.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=0cvU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cleber/tags/python-next-pull-request' into staging
Python (acceptance tests) queue, 2019-10-28
# gpg: Signature made Mon 28 Oct 2019 23:43:11 GMT
# gpg: using RSA key 7ABB96EB8B46B94D5E0FE9BB657E8D33A5F209F3
# gpg: Good signature from "Cleber Rosa <crosa@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7ABB 96EB 8B46 B94D 5E0F E9BB 657E 8D33 A5F2 09F3
* remotes/cleber/tags/python-next-pull-request:
tests/boot_linux_console: Run BusyBox on 5KEc 64-bit cpu
tests/boot_linux_console: Add initrd test for the Exynos4210
tests/boot_linux_console: Add a test for the Raspberry Pi 2
tests/boot_linux_console: Use Avocado archive::gzip_uncompress()
.travis.yml: Let the avocado job run the 40p tests
tests/acceptance: Test OpenBIOS on the PReP/40p
tests/acceptance: Add test that runs NetBSD 4.0 installer on PRep/40p
.travis.yml: Let the avocado job run the Leon3 test
tests/acceptance: Add test that boots the HelenOS microkernel on Leon3
tests/acceptance: Refactor exec_command_and_wait_for_pattern()
tests/acceptance: Send <carriage return> on serial lines
tests/acceptance: Fix wait_for_console_pattern() hangs
Acceptance tests: refactor wait_for_console_pattern
Python libs: close console sockets before shutting down the VMs
Acceptance tests: work around socket dir
MAINTAINERS: update location of Python libraries
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Add a few individuals
- Add China Mobile
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl217isACgkQ+9DbCVqe
KkQZ3AgAl4COpavOlxH/AFZknILQGQHdS1pLNta/TlCGRqG9xxYdz1/Mm/O0jOkd
BExAcCQZZpIU8wu9TNmFL8LtGao6tLNjGTiQFwE5ZdStZnQRPVThS6xgwkERbP9E
vaVG0x8TKSIN/BDXr2hfwvQsF/LZaCRjEZ2x2DnxYGJcG6RizwkrhlaPWT4wc5VG
MFA5r2eKVD33rKg5myNZPYDfecVnpID9yillg9S1eZkcjCEX0dSkUcaGCIeSy7wn
iaLMehCmvPJNHOuvnoGKIsPP21dlikp9jWD7KJHHkdxnSWC7MQiKGLdEtCbbrOv1
kVibSSrMTygza1oZpXVh6s+otUoexw==
=XRLz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-gitdm-next-271019-1' into staging
gitdm updates
- Add a few individuals
- Add China Mobile
# gpg: Signature made Sun 27 Oct 2019 19:21:15 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-gitdm-next-271019-1:
contrib/gitdm: add China Mobile to the domain map
contrib/gitdm: add Andrey to the individual group
contrib/gitdm: add Emanuele as an individual
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use RCU_READ_LOCK_GUARD and WITH_RCU_READ_LOCK_GUARD
to replace the manual rcu_read_(un)lock calls.
I think the only change is virtio_load which was missing unlocks
in error paths; those end up being fatal errors so it's not
that important anyway.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191028161109.60205-1-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use RCU_READ_LOCK_GUARD rather than the manual rcu_read_(un)lock call.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191025103403.120616-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use RCU_READ_LOCK_GUARD instead of manual rcu_read_(un)lock
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20191025103403.120616-2-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
