The allow-rpcs option accepts a comma-separated list of RPCs to
enable. This option is opposite to --block-rpcs. Using --block-rpcs
and --allow-rpcs at the same time is not allowed.
resolves: https://gitlab.com/qemu-project/qemu/-/issues/1505
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230207075115.1525-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
This patch translates GLib-specific log levels to system ones, so that
they may be used by both *nix syslog() (as a "priority" argument) and
Windows ReportEvent() (as a "wType" argument).
Currently the only codepath to write to "syslog" domain is slog()
function. However, this patch allows the interface to be extended.
Note that since slog() is using G_LOG_LEVEL_INFO level, its behaviour
doesn't change.
Originally-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Tested-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
This commit allows QGA to write to Windows event log using Win32 API's
ReportEvent() [1], much like syslog() under *nix guests.
In order to generate log message definitions we use a very basic message
text file [2], so that every QGA's message gets ID 1. The tools
"windmc" and "windres" respectively are used to generate ".rc" file and
COFF object file, and then the COFF file is linked into qemu-ga.exe.
[1] https://learn.microsoft.com/en-us/windows/win32/api/winbase/nf-winbase-reporteventa
[2] https://learn.microsoft.com/en-us/windows/win32/eventlog/message-text-files
Originally-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Andrey Drobyshev <andrey.drobyshev@virtuozzo.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Tested-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
qga: Add initial OpenBSD and NetBSD support
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
UFS supports FS freezing through ioctl UFSSUSPEND on /dev/ufssuspend.
Frozen FS can be thawed by closing /dev/ufssuspend file descriptior.
Use getmntinfo to get a list of mounted FS.
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Alexander Ivanov <alexander.ivanov@virtuozzo.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Let's use better, more inclusive wording here.
Message-Id: <20220727092135.302915-3-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use a more appropriate wording for this command line and config
file option. The old ones are still accepted for compatibility reasons,
but marked as deprecated now so that it could be removed in a future
version of QEMU.
This change is based on earlier patches from Philippe Mathieu-Daudé,
with the idea for the new option name suggested by BALATON Zoltan.
And while we're at it, replace the "?" in the help text with "help"
since that does not have the problem of conflicting with the wildcard
character of the shells.
Message-Id: <20220727092135.302915-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The old code is kind of wrong. Say it's 1649309843.000001 seconds past
the epoch. Prints "1649309843.1". 9us later, it prints "1649309843.10".
Should really use %06lu for the microseconds part.
Use GDateTime instead, as suggested by Daniel.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Simplify the function to only return the directory path. Callers are
adjusted to use the GLib function to build paths, g_build_filename().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-39-marcandre.lureau@redhat.com>
The latter simply requires glib.h, while the former is not in the
Windows API (but provided by mingw header & CRT)
Also simplify the expression for 1/10s.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-12-marcandre.lureau@redhat.com>
According to GLib API:
g_get_current_time has been deprecated since version 2.62 and should not
be used in newly-written code. GTimeVal is not year-2038-safe. Use
g_get_real_time() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qmp_disable_command() now takes an optional error string to return a
more explicit error message.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1928806
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix up 80+ char line
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix 80+ char violation while we're here
*fix w32 build breakage from changing INVALID_SET_FILE_POINTER
definition from a cast to a subtraction
Signed-off-by: Michael Roth <michael.roth@amd.com>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Since commit 781f2b3d1e ("qga: process_event() simplification"),
send_response() is called unconditionally, but will assert when "rsp" is
NULL. This may happen with QCO_NO_SUCCESS_RESP commands, such as
"guest-shutdown".
Fixes: 781f2b3d1e
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Although qemu-ga has supported vsock since 2016 it was not documented on
the man page.
Also add the socket address representation to the qga --help output.
Fixes: 586ef5dee7
("qga: add vsock-listen method")
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since 0b69f6f72c "qapi: remove
qmp_unregister_command()", the command list can be declared const.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com>
[Rebased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal. Generate it into separate files. This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Simplify the code around qmp_dispatch():
- rely on qmp_dispatch/check_obj() for message checking
- have a single send_response() point
- constify send_response() argument
It changes a couple of error messages:
* When @req isn't a dictionary, from
Invalid JSON syntax
to
QMP input must be a JSON object
* When @req lacks member "execute", from
this feature or command is not currently supported
to
QMP input lacks member 'execute'
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Currently whenever the qemu-ga's service doesn't find the virtio-serial
the run_agent() loops in a QGA_RETRY_INTERVAL (default 5 seconds)
intervals and try to restart the qemu-ga which causes a synchronous loop.
Changed to wait and listen for the serial events by registering for
notifications a proper serial event handler that deals with events:
DBT_DEVICEARRIVAL indicates that the device has been inserted and
is available
DBT_DEVICEREMOVECOMPLETE indicates that the devive has been removed
Which allow us to determine when the channel path is available for the
qemu-ga to restart.
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This adds an option to instruct the agent to periodically attempt
re-opening the communication channel after a channel error has
occurred. The main use-case for this is providing an OS-independent
way of allowing the agent to survive situations like hotplug/unplug of
the communication channel, or initial guest set up where the agent may
be installed/started prior to the installation of the channel device's
driver.
There are nicer ways of implementing this functionality via things
like systemd services, but this option is useful for platforms like
*BSD/w32.
Currently a channel error will result in the GSource for that channel
being removed from the GMainLoop, but the main loop continuing to run.
That behavior results in a dead loop when --retry-path isn't set, and
prevents us from knowing when to attempt re-opening the channel when
it is set, so we also force the loop to exit as part of this patch.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Eventually we want a w32 service to be able to restart the qga main
loop from within service_main(). To allow for this we move service
handling out of run_agent() such that service_main() calls
run_agent() instead of the reverse.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Bishara AbuHattoum <bishara@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For w32 services we rely on the global GAState to access resources
associated with the agent within service_main(). Currently this is
sufficient for starting the agent since we open the channel once prior
to calling service_main(), and simply start the GMainLoop to start the
agent from within service_main().
Eventually we want to be able to also [re-]open the communication
channel from within service_main(), which requires access to
config/socket_activation variables, so we hang them off GAState in
preparation for that.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Sameeh Jubran <sameeh@daynix.com>
*dont move GAConfig struct, just the typedef
*fix build bisect for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch better separates the init/cleanup routines out into
separate functions to make the start-up procedure a bit easier to
follow. This will be useful when we eventually break out the actual
start/stop of the agent's main loop into separates routines that
can be called multiple times after the init phase.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch add support for freeze specified fs.
The valid mountpoints list member are [1]:
The path of a mounted folder, for example, Y:\MountX\
A drive letter, for example, D:\
A volume GUID path of the form \\?\Volume{GUID}\,
where GUID identifies the volume
A UNC path that specifies a remote file share,
for example, \\Clusterx\Share1\
[1] https://docs.microsoft.com/en-us/windows/desktop/api/vsbackup/nf-vsbackup-ivssbackupcomponents-addtosnapshotset
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
json_parser_parse_err() may return something else than a QDict, in
which case we loose the object. Let's keep track of the original
object to avoid leaks.
When an error occurs, "qdict" contains the response, but we still
check the "execute" key there. Untangle a bit this code, by having a
clear error path.
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
By using the more specific type, we get fewer downcasts. The
downcasts are safe, but not obviously so, at least not locally.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>
All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object. Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>
Commit cf869d5317 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control". Fix that.
Out-of-band execution in a monitor that doesn't support it now fails
with
{"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}
instead of
{"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}
The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.
The new description is a bit unspecific, but it'll do.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>
When pulling in headers that are in the same directory as the C file (as
opposed to one in include/), we should use its relative path, without a
directory.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
