Rename function arguments to make intent clearer.
Better documentation for slot control logic.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
During boot, linux guests tend to clear all bits in pcie slot status
register which is used for hotplug.
If they clear bits that weren't set this is racy and will lose events:
not a big problem for manual hotplug on bare-metal, but a problem for us.
For example, the following is broken ATM:
/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \
-device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \
-device virtio-balloon-pci,id=balloon,bus=pcie_root_port_0 \
-monitor stdio disk.qcow2
(qemu)device_del balloon
(qemu)cont
Balloon isn't deleted as it should.
As a work-around, detect this attempt to clear slot status and revert
status to what it was before the write.
Note: in theory this can be detected as a duplicate button press
which cancels the previous press. Does not seem to happen in
practice as guests seem to only have this bug during init.
Note2: the right thing to do is probably to fix Linux to
read status before clearing it, and act on the bits that are set.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
During boot, linux would sometimes overwrites control of a powered off
slot before powering it on. Unfortunately QEMU interprets that as a
power off request and ejects the device.
For example:
/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -S -machine q35 \
-device pcie-root-port,id=pcie_root_port_0,slot=2,chassis=2,addr=0x2,bus=pcie.0 \
-monitor stdio disk.qcow2
(qemu)device_add virtio-balloon-pci,id=balloon,bus=pcie_root_port_0
(qemu)cont
Balloon is deleted during guest boot.
To fix, save control beforehand and check that power
or led state actually change before ejecting.
Note: this is more a hack than a solution, ideally we'd
find a better way to detect ejects, or move away
from ejects completely and instead monitor whether
it's safe to delete device due to e.g. its power state.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
If we are trying to set multiple bits at once, testing that just one of
them is already set gives a false positive. As a result we won't
interrupt guest if e.g. presence detection change and attention button
press are both set. This happens with multi-function device removal.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Implementing an ACS capability on downstream ports and multifunction
endpoints indicates isolation and IOMMU visibility to a finer
granularity. This creates smaller IOMMU groups in the guest and thus
more flexibility in assigning endpoints to guest userspace or an L2
guest.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Message-Id: <07489975121696f5573b0a92baaf3486ef51e35d.1550768238.git-series.knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
When unplugging a device, at one point the device will be destroyed
via object_unparent(). This will, one the one hand, unrealize the
removed device hierarchy, and on the other hand, destroy/free the
device hierarchy.
When chaining hotplug handlers, we want to overwrite a bus hotplug
handler by the machine hotplug handler, to be able to perform
some part of the plug/unplug and to forward the calls to the bus hotplug
handler.
For now, the bus hotplug handler would trigger an object_unparent(), not
allowing us to perform some unplug action on a device after we forwarded
the call to the bus hotplug handler. The device would be gone at that
point.
machine_unplug_handler(dev)
/* eventually do unplug stuff */
bus_unplug_handler(dev)
/* dev is gone, we can't do more unplug stuff */
So move the object_unparent() to the original caller of the unplug. For
now, keep the unrealize() at the original places of the
object_unparent(). For implicitly chained hotplug handlers (e.g. pc
code calling acpi hotplug handlers), the object_unparent() has to be
done by the outermost caller. So when calling hotplug_handler_unplug()
from inside an unplug handler, nothing is to be done.
hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
machine_unplug_handler(dev) {
/* eventually do unplug stuff */
bus_unplug_handler(dev) -> calls unrealize(dev)
/* we can do more unplug stuff but device already unrealized */
}
object_unparent(dev)
In the long run, every unplug action should be factored out of the
unrealize() function into the unplug handler (especially for PCI). Then
we can get rid of the additonal unrealize() calls and object_unparent()
will properly unrealize the device hierarchy after the device has been
unplugged.
hotplug_handler_unplug(dev) -> calls machine_unplug_handler()
machine_unplug_handler(dev) {
/* eventually do unplug stuff */
bus_unplug_handler(dev) -> only unplugs, does not unrealize
/* we can do more unplug stuff */
}
object_unparent(dev) -> will unrealize
The original approach was suggested by Igor Mammedov for the PCI
part, but I extended it to all hotplug handlers. I consider this one
step into the right direction.
To summarize:
- object_unparent() on synchronous unplugs is done by common code
-- "Caller of hotplug_handler_unplug"
- object_unparent() on asynchronous unplugs ("unplug requests") has to
be done manually
-- "Caller of hotplug_handler_unplug"
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190228122849.4296-2-david@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The entire link status register for SR-IOV VFs is defined as RsvdZ,
reads simply return zero. Usually this is nothing more than lspci
reporting inconsequentially broken values:
LnkSta: Speed unknown, Width x0, ...
However, now that we're using the downstream endpoint link status to
fill in the value at the parent downstream port, invalid values become
a problem. In particular, the PCIe hotplug driver in Linux looks for
a valid negotiated link width and will fail to enumerate hot-added
downstream endpoints without non-zero value here, ex:
pciehp 0000:00:02.0:pcie004: Slot(0): Attention button pressed
pciehp 0000:00:02.0:pcie004: Slot(0) Powering on due to button press
pciehp 0000:00:02.0:pcie004: Slot(0): Card present
pciehp 0000:00:02.0:pcie004: Slot(0): Link Up
pciehp 0000:00:02.0:pcie004: link training error: status 0x2000
pciehp 0000:00:02.0:pcie004: Failed to check link status
Resolve by using minimum width and speed values for the downstream
port link status when the endpoint fails to provide valid values.
Long term, we may want to implement emulation in the vfio-pci host
driver to suppliment this field with the PF value as the SR-IOV spec
seems to allow, but the solution here is compatible should that be
implemented later.
Fixes: 727b48661f ("pci: Sync PCIe downstream port LNKSTA on read")
Reported-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <155060310248.19547.14979269067689441201.stgit@gimli.home>
Tested-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Certain devices types, like memory/CPU, are now being handled using a
hotplug interface provided by a top-level MachineClass. Hotpluggable
host bridges are another such device where it makes sense to use a
machine-level hotplug handler. However, unlike those devices,
host-bridges have a parent bus (the main system bus), and devices with
a parent bus use a different mechanism for registering their hotplug
handlers: qbus_set_hotplug_handler(). This interface currently expects
a handler to be a subclass of DeviceClass, but this is not the case
for MachineClass, which derives directly from ObjectClass.
Internally, the interface only requires an ObjectClass, so expose that
in qbus_set_hotplug_handler().
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <154999589921.690774.3640149277362188566.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We better stop right away. For now, errors would be partially ignored
(so the guest might get informed or the device might get unplugged),
although actual plug/unplug will be reported as failed to the user.
While at it, properly move the check to the pre_plug handler for the plug
case, as we can test the slot state before the device will be realized.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce and use the "unplug" callback.
This is a preparation for multi-stage hotplug handlers, whereby the bus
hotplug handler is overwritten by the machine hotplug handler. This handler
will then pass control to the bus hotplug handler. So to get this running
cleanly, we also have to make sure to go via the hotplug handler chain when
actually unplugging a device after an unplug request. Lookup the hotplug
handler and call "unplug".
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The callbacks are also called for cold plugged devices. Drop the "hot"
to better match the actual callback names.
While at it, also rename pcie_cap_slot_hotplug_common() to
pcie_cap_slot_plug_common().
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make use of the PCIESlot speed and width fields to update link
information beyond those configured in pcie_cap_v1_fill(). This is
only called for devices supporting a version 2 capability and
automatically skips any non-PCIESlot devices. Only devices with
increased link values generate any visible config space differences.
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Tested-by: Geoffrey McRae <geoff@hostfission.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCIe link speed and width between a downstream device and its
upstream port is negotiated on real hardware and susceptible to
dynamic changes due to signal issues and power management. In the
emulated device case there is no real hardware link, but we still
might wish to have some consistency between endpoint and downstream
port via a virtual negotiation. There is of course a real link for
assigned devices and this same virtual negotiation allows the
downstream port to match the endpoint, synchronizing on every read
to support underlying physical hardware dynamically adjusting the
link.
This negotiation is intentionally unidirectional for compatibility.
If the endpoint exceeds the capabilities of the downstream port or
there is no endpoint device, the downstream port reports negotiation
to its maximum speed and width, matching the previous case where
negotiation was absent. De-tuning the endpoint to match a virtual
link doesn't seem to benefit anyone and is a condition we've thus
far reported without functional issues.
Note that PCI_EXP_LNKSTA is already ignored for migration
compatibility via pcie_cap_v1_fill().
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Tested-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In preparation for reporting higher virtual link speeds and widths,
create enums and macros to help us manage them.
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Tested-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When VM boots from the latest version of linux kernel, after
hot-unpluging virtio-blk disks which are hotplugged into
pcie-root-port, the VM's dmesg log shows:
[ 151.046242] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0001 from Slot Status
[ 151.046365] pciehp 0000:00:05.0:pcie004: Slot(0-3): Attention button pressed
[ 151.046369] pciehp 0000:00:05.0:pcie004: Slot(0-3): Powering off due to button press
[ 151.046420] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 151.046425] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200
[ 151.046464] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 151.046468] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0
[ 156.163421] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 2f1
[ 156.163427] pciehp 0000:00:05.0:pcie004: pciehp_unconfigure_device: domain🚌dev = 0000:06:00
[ 156.198736] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 156.198772] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400
[ 157.224124] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0018 from Slot Status
[ 157.224194] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300
[ 157.224220] pciehp 0000:00:05.0:pcie004: pciehp_check_link_active: lnk_status = 2011
[ 157.224223] pciehp 0000:00:05.0:pcie004: Slot(0-3): Link Up
[ 157.224233] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 7f1
[ 157.224281] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 157.224285] pciehp 0000:00:05.0:pcie004: pciehp_power_on_slot: SLOTCTRL a8 write cmd 0
[ 157.224300] pciehp 0000:00:05.0:pcie004: __pciehp_link_set: lnk_ctrl = 0
[ 157.224336] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 157.224339] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200
[ 159.739294] pci 0000:06:00.0 id reading try 50 times with interval 20 ms to get ffffffff
[ 159.739315] pciehp 0000:00:05.0:pcie004: pciehp_check_link_status: lnk_status = 2011
[ 159.739318] pciehp 0000:00:05.0:pcie004: Failed to check link status
[ 159.739371] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 159.739394] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400
[ 160.771426] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 160.771452] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300
[ 160.771495] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 160.771499] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd 40
[ 160.771535] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status
[ 160.771539] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300
After analyzing the log information, it seems that qemu doesn't
change the Link Status from active to inactive after hot-unplug.
This results in the abnormal log after the linux kernel commit
d331710ea78fea merged.
Furthermore, If I hotplug the same virtio-blk disk after hot-unplug,
the virtio-blk would turn on and then back off.
So this patch set the Link Status inactive after hot-unplug and
active after hot-plug.
Signed-off-by: Zheng Xiang <zhengxiang9@huawei.com>
Signed-off-by: Zheng Xiang <xiang.zheng@linaro.org>
Cc: Wang Haibin <wanghaibin.wang@huawei.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The bus pointer in PCIDevice is basically redundant with QOM information.
It's always initialized to the qdev_get_parent_bus(), the only difference
is the type.
Therefore this patch eliminates the field, instead creating a pci_get_bus()
helper to do the type mangling to derive it conveniently from the QOM
Device object underneath.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Convert i82801b11, io3130_upstream, io3130_downstream and
pcie_root_port devices to realize.
Cc: mst@redhat.com
Cc: marcel@redhat.com
Cc: armbru@redhat.com
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make several Link Control Register flags writable to conform
with the PCI Express spec.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Absence of any Extended Capabilities is required to be
indicated by an Extended Capability header with a Capability ID of
0000h, a Capability Version of 0h, and a Next Capability Offset of 000h.
Instead of inserting a 'NULL' capability is simpler to mark the start
of the Extended Configuration Space as read-only to achieve the same
behaviour.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we add PCIe extended capabilities, we should be following the rule
that we add the head extended cap (at offset 0x100) first, then the rest
of them. Meanwhile, we are always adding new capability bits at the end
of the list. Here the "next" looks meaningless in all cases since it
should always be zero (along with the "header").
Simplify the function a bit, and it looks more readable now.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VFIO actually wants to create a capability with ID == 0.
This is done to make guest drivers skip the given capability.
pcie_add_capability then trips up on this capability
when looking for end of capability list.
To support this use-case, it's easy enough to switch to
e.g. 0xffffffff for these comparisons - we can be sure
it will never match a 16-bit capability ID.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
This patches enable the Address Translation Service support for virtio
pci devices. This is needed for a guest visible Device IOTLB
implementation and will be required by vhost device IOTLB API
implementation for intel IOMMU.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We changed link status register in pci express endpoint capability
over time. Specifically,
commit b2101eae63 ("pcie: Set the "link
active" in the link status register") set data link layer link active
bit in this register without adding compatibility to old machine types.
When migrating from qemu 2.3 and older this affects xhci devices which
under machine type 2.0 and older have a pci express endpoint capability
even if they are on a pci bus.
Add compatibility flags to make this bit value match what it was under
2.3.
Additionally, to avoid breaking migration from qemu 2.3 and up,
suppress checking link status during migration: this seems sane
since hardware can change link status at any time.
https://bugzilla.redhat.com/show_bug.cgi?id=1352860
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: b2101eae63
("pcie: Set the "link active" in the link status register")
Cc: qemu-stable@nongnu.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Added support for PCIe CAP v1, while reusing some of the existing v2
infrastructure.
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
Signed-off-by: Leonid Bloch <leonid.bloch@ravellosystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Device's Offset and size can reach PCIE_CONFIG_SPACE_SIZE,
fix the corresponding assert.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-23-git-send-email-peter.maydell@linaro.org
Enable PCIe device multi-function hot-add, just ensure function 0 is added
last, then driver will get the notification to scan the slot.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case user want to cancel the hot-add operation, should roll back,
device_del the added function that still don`t work.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some firmwares can test that and assume the device hasn't come
up if that bit isn't set
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In particular, don't include it into headers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
from pcie spec 7.8.17, the End-End TLP Prefix Blocking bit local
is 15(e.g. 0x8000) in device control 2 register.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by:
https://bugs.launchpad.net/qemu/+bug/1393440
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This comment applies to all functions below it.
It is not appropriate that called capability allocation
functions, change it into capability list management functions.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
'HotplugHandler.unplug' callback is currently used as async
call to issue unplug request for device that implements it.
Renaming 'unplug' callback to 'unplug_request' should help to
avoid confusion about what callback does and would allow to
introduce 'unplug' callback that would perform actual device
removal when guest is ready for it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Rename helper functions to make a clearer distinction between
the PCIe capability/control register feature ARI forwarding and a
device that supports the ARI feature via an ARI extended PCIe capability.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCI_ARI_CAP_NFN, a macro for reading next function was used instead of
the intended write.
Signed-off-by: Knut Omang <knut.omang@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The current code is broken: it does surprise removal which crashes guests.
Reimplemented the steps:
- Hotplug triggers both 'present detect change' and
'attention button pressed'.
- Hotunplug starts by triggering 'attention button pressed',
then waits for the OS to power off the device and only
then detaches it.
Fixes CVE-2014-3471.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is needed by hot-unplug in order to get an indication
from the OS when the device can be physically detached.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Trivial issue, discovered while debugging.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIE is causing asserts each time a multifunction device is added
on command line (coldplug).
This is caused by
commit a66e657e18
pci/pcie: convert PCIE hotplug to use hotplug-handler API
QEMU abort is caused by misplaced assertion, which should
be checked only when device is hotplugged.
Reference to regression report:
http://www.mail-archive.com/qemu-devel@nongnu.org/msg216226.html
Fixes: a66e657e18
Reported-By: Nigel Kukard <nkukard+qemu@lbsd.net>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks
and register them as "hotplug-handler" interface implementation of
PCIE_SLOT device.
Replace pci_bus_hotplug() wiring with setting link on PCI BUS
"hotplug-handler" property to PCI_BRIDGE_DEV device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
