The only caller of nbd_read_eof() is nbd_receive_reply(), so it doesn't
have to live in the header file, but can move next to its caller.
Also add the missing coroutine_fn to the function and its caller.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
There's no need to read into a temporary buffer (oversized
since commit 7d3123e1) followed by a byteswap into a uint64_t
to check for a magic number via memcmp(), when the code
immediately below demonstrates reading into the uint64_t then
byteswapping in place and checking for a magic number via
integer math. What's more, having a different error message
when the server's first reply byte is 0 is unusual - it's no
different from any other wrong magic number, and we already
detected short reads. That whole strlen() issue has been
present and useless since commit 1d45f8b5 in 2010; perhaps it
was leftover debugging (since the correct magic number happens
to be ASCII)? Make the error messages more consistent and
detailed while touching things.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181215135324.152629-9-eblake@redhat.com>
These functions are used for formatting pretty trace points. We are
going to add some in block/nbd-client, so, let's publish all these
functions at once. Note, that nbd_reply_type_lookup is already
published, and constants, "named" by these functions live in
include/block/nbd.h too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181102151152.288399-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Minimal implementation: for structured error only error_report error
message.
Note that test 83 is now more verbose, because the implementation
prints more warnings about unexpected communication errors; perhaps
future patches should tone things down by using trace messages
instead of traces, but the common case of successful communication
is no noisier than before.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171027104037.8319-13-eblake@redhat.com>
An upcoming change to block/nbd-client.c will want to read the
tail of a structured reply chunk directly from the wire. Move
this function to make it easier.
Based on a patch from Vladimir Sementsov-Ogievskiy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-12-eblake@redhat.com>
Upcoming patches will implement the NBD structured reply
extension [1] for both client and server roles. Declare the
constants, structs, and lookup routines that will be valuable
whether the server or client code is backported in isolation.
This includes moving one constant from an internal header to
the public header, as part of the structured read processing
will be done in block/nbd-client.c rather than nbd/client.c.
[1]https://github.com/NetworkBlockDevice/nbd/blob/extension-structured-reply/doc/proto.md
Based on patches from Vladimir Sementsov-Ogievskiy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-4-eblake@redhat.com>
This is needed in preparation for structured reply handling,
as we will be performing the translation from NBD error to
system errno value higher in the stack at block/nbd-client.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-3-eblake@redhat.com>
NBD errors were originally sent over the wire based on Linux errno
values; but not all the world is Linux, and not all platforms share
the same values. Since a number isn't very easy to decipher on all
platforms, update the trace messages to include the name of NBD
errors being sent/received over the wire. Tweak the trace messages
to be at the point where we are using the NBD error, not the
translation to the host errno values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20171027104037.8319-2-eblake@redhat.com>
Prepare indenting for the following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-9-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To be consistent when their _structured_ analogs will be introduced.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20171012095319.136610-4-vsementsov@virtuozzo.com>
[eblake: also tweak trace message contents]
Signed-off-by: Eric Blake <eblake@redhat.com>
Rather than open-coding our own read/write-all functions, we
can make use of the recently-added qio code. It slightly
changes the error message in one of the iotests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170905191114.5959-4-eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Refactor nbd_read_eof to return 1 on success, 0 on eof, when no
data was read and <0 for other cases, because returned size of
read data is not actually used.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170804151440.320927-3-vsementsov@virtuozzo.com>
[eblake: tweak function comments, rebase to test 083 enhancements]
Signed-off-by: Eric Blake <eblake@redhat.com>
A typo in commit 23e099c set the size of buf[] used in response
to NBD_OPT_EXPORT_NAME according to the length needed for old-style
negotiation (4 bytes of flag information) instead of the intended
2 bytes used in new style. If the client doesn't enable
NBD_FLAG_C_NO_ZEROES, then the server sends two bytes too many,
and is then out of sync in response to the client's next command
(the bug is masked when modern qemu is the client, since we enable
the no zeroes flag).
While touching this code, add some more defines to nbd_internal.h
rather than having quite so many magic numbers in the .c; also,
use "" initialization rather than memset(), and tweak the oldstyle
negotiation to better match the spec description of the layout
(since the spec is big-endian, skipping two bytes as 0 followed by
writing a 2-byte flag is the same as writing a zero-extended 4-byte
flag), to make it a bit easier to follow compared to the spec.
[checkpatch.pl has some false positives in the comments]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170717192635.17880-3-eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
NBD_OPT_EXPORT_NAME is lousy: per the NBD protocol, any failure
requires the server to close the connection rather than report an
error to us. Therefore, upstream NBD recently added NBD_OPT_GO as
the improved version of the option that does what we want [1]: it
reports sane errors on failures, and on success provides at least
as much info as NBD_OPT_EXPORT_NAME.
[1] https://github.com/NetworkBlockDevice/nbd/blob/extension-info/doc/proto.md
This is a first cut at use of the information types. Note that we
do not need to use NBD_OPT_INFO, and that use of NBD_OPT_GO means
we no longer have to use NBD_OPT_LIST to learn whether a server
requires TLS (this requires servers that gracefully handle unknown
NBD_OPT, many servers prior to qemu 2.5 were buggy, but I have patched
qemu, upstream nbd, and nbdkit in the meantime, in part because of
interoperability testing with this patch). We still fall back to
NBD_OPT_LIST when NBD_OPT_GO is not supported on the server, as it
is still one last chance for a nicer error message. Later patches
will use further info, like NBD_INFO_BLOCK_SIZE.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-8-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol has several constants defined in various extensions
that we are about to implement. Expose them to the code, along with
an easy way to map various constants to strings during diagnostic
messages.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170707203049.534-4-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let NBD use the trace mechanisms already present in qemu. Now you can
use the -trace optino of qemu, or the -T/--trace option of qemu-img,
qemu-io, and qemu-nbd, to select nbd traces. For qemu, the QMP commands
trace-event-{get,set}-state can also toggle tracing on the fly.
Example:
qemu-nbd --trace 'nbd_*' <image file> # enables all nbd traces
Recompilation with CFLAGS=-DDEBUG_NBD is no more needed, furthermore,
DEBUG_NBD macro is removed from the code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170707152918.23086-11-vsementsov@virtuozzo.com>
[eblake: minor tweaks to a couple of traces]
Signed-off-by: Eric Blake <eblake@redhat.com>
Following commit will reuse it for nbd server too.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170602150150.258222-3-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename
nbd_wr_syncv -> nbd_rwv
read_sync -> nbd_read
read_sync_eof -> nbd_read_eof
write_sync -> nbd_write
drop_sync -> nbd_drop
1. nbd_ prefix
read_sync and write_sync are already shared, so it is good to have a
namespace prefix. drop_sync will be shared, and read_sync_eof is
related to read_sync, so let's rename them all.
2. _sync suffix
_sync is related to the fact that nbd_wr_syncv doesn't return if a
write to socket returns EAGAIN. The first implementation of
nbd_wr_syncv (was wr_sync in 7a5ca8648b) just loops while getting
EAGAIN, the current implementation yields in this case.
Why we want to get rid of it:
- it is normal for r/w functions to be synchronous, so having an
additional suffix for it looks redundant (contrariwise, we have
_aio suffix for async functions)
- _sync suffix in block layer is used when function does flush (so
using it for other thing is confusing a bit)
- keep function names short after adding nbd_ prefix
3. for nbd_wr_syncv let's use more common notation 'rw'
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170602150150.258222-2-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There a lot of calls of these functions, which already have errp, which
they are filling themselves. On the other hand, nbd_wr_syncv has errp
parameter too, so it would be great to connect them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170516094533.6160-5-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Will be used in following patch to provide actual error message in
some cases.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170516094533.6160-4-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
functions read_sync, drop_sync, write_sync, and also
nbd_negotiate_write, nbd_negotiate_read, nbd_negotiate_drop_sync
returns number of processed bytes. But what this number can be,
except requested number of bytes?
Actually, underlying nbd_wr_syncv function returns a value >= 0 and
!= requested_bytes only on eof on read operation. So, firstly, it is
impossible on write (let's add an assert) and on read it actually
means, that communication is broken (except nbd_receive_reply, see
below).
Most of callers operate like this:
if (func(..., size) != size) {
/* error path */
}
, i.e.:
1. They are not interested in partial success
2. Extra duplications in code (especially bad are duplications of
magic numbers)
3. User doesn't see actual error message, as return code is lost.
(this patch doesn't fix this point, but it makes fixing easier)
Several callers handles ret >= 0 and != requested-size separately, by
just returning EINVAL in this case. This patch makes read_sync and
friends return EINVAL in this case, so final behavior is the same.
And only one caller - nbd_receive_reply() does something not so
obvious. It returns EINVAL for ret > 0 and != requested-size, like
previous group, but for ret == 0 it returns 0. The only caller of
nbd_receive_reply() - nbd_read_reply_entry() handles ret == 0 in the
same way as ret < 0, so for now it doesn't matter. However, in
following commits error path handling will be improved and we'll need
to distinguish success from fail in this case too. So, this patch adds
separate helper for this case - read_sync_eof.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20170516094533.6160-3-vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the QIOTaskFunc signature takes an Object * for
the source, and an Error * for any error. We also need to
be able to provide a result pointer. Rather than continue
to add parameters to QIOTaskFunc, remove the existing
ones and simply pass the QIOTask object instead. This
has methods to access all the other data items required
in the callback impl.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
NBD commit 6d34500b clarified how clients and servers are supposed
to behave before closing a connection. It added NBD_REP_ERR_SHUTDOWN
(for the server to announce it is about to go away during option
haggling, so the client should quit sending NBD_OPT_* other than
NBD_OPT_ABORT) and ESHUTDOWN (for the server to announce it is about
to go away during transmission, so the client should quit sending
NBD_CMD_* other than NBD_CMD_DISC). It also clarified that
NBD_OPT_ABORT gets a reply, while NBD_CMD_DISC does not.
This patch merely adds the missing reply to NBD_OPT_ABORT and teaches
the client to recognize server errors. Actually teaching the server
to send NBD_REP_ERR_SHUTDOWN or ESHUTDOWN would require knowing that
the server has been requested to shut down soon (maybe we could do
that by installing a SIGINT handler in qemu-nbd, which transitions
from RUNNING to a new state that waits for the client to react,
rather than just out-right quitting - but that's a bigger task for
another day).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-15-git-send-email-eblake@redhat.com>
[Move dummy ESHUTDOWN to include/qemu/osdep.h. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than open-coding each option request, it's easier to
have common helper functions do the work. That in turn requires
having convenient packed types for handling option requests
and replies.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-9-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current upstream NBD documents that requests have a 16-bit flags,
followed by a 16-bit type integer; although older versions mentioned
only a 32-bit field with masking to find flags. Since the protocol
is in network order (big-endian over the wire), the ABI is unchanged;
but dealing with the flags as a separate field rather than masking
will make it easier to add support for upcoming NBD extensions that
increase the number of both flags and commands.
Improve some comments in nbd.h based on the current upstream
NBD protocol (https://github.com/yoe/nbd/blob/master/doc/proto.md),
and touch some nearby code to keep checkpatch.pl happy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The NBD protocol allows servers to advertise a human-readable
description alongside an export name during NBD_OPT_LIST. Add
an option to pass through the user's string to the NBD client.
Doing this also makes it easier to test commit 200650d4, which
is the client counterpart of receiving the description.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476469998-28592-2-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that NBD relies on the block layer to fragment things, we no
longer need to track an offset argument for which fragment of
a request we are actually servicing.
While at it, use true and false instead of 0 and 1 for a bool
parameter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468607524-19021-6-git-send-email-eblake@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The compiler is smart enough to optimize out 'if (0)', but won't
type-check our printfs if they are hidden behind #if.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1459913704-19949-3-git-send-email-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
This extends the NBD protocol handling code so that it is capable
of negotiating TLS support during the connection setup. This involves
requesting the STARTTLS protocol option before any other NBD options.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-14-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all callers are converted to use I/O channels for
initial connection setup, it is possible to switch the core
NBD protocol handling core over to use QIOChannel APIs for
actual sockets I/O.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-7-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We have NBD server code and client code, all mixed in a file. Now split
them into separate files under nbd/, and update MAINTAINERS.
filter_nbd for iotest 083 is updated to keep the log filtered out.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1452760863-25350-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
