Commit Graph

70 Commits

Author SHA1 Message Date
Greg Kurz
4812f26152 xics/kvm: Add proper rollback to xics_kvm_init()
Make xics_kvm_disconnect() able to undo the changes of a partial execution
of xics_kvm_connect() and use it to perform rollback.

Note that kvmppc_define_rtas_kernel_token(0) never fails, no matter the
RTAS call has been defined or not.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077922319.433243.609897156640506891.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz
330a21e3c4 xics/kvm: Add error propagation to ic*_set_kvm_state() functions
This allows errors happening there to be propagated up to spapr_irq,
just like XIVE already does.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077921763.433243.4614327010172954196.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz
ab3d15fa84 xics/kvm: Always use local_err in xics_kvm_init()
Passing both errp and &local_err to functions is a recipe for messing
things up.

Since we must use &local_err for icp_kvm_realize(), use &local_err
everywhere where rollback must happen and have a single call to
error_propagate() them all. While here, add errno to the error
message.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077921212.433243.11716701611944816815.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz
64fb96214c xics/kvm: Skip rollback when KVM XICS is absent
There is no need to rollback anything at this point, so just return an
error.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077920657.433243.13541093940589972734.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz
eab9f191a0 xics/spapr: Rename xics_kvm_init()
Switch to using the connect/disconnect terminology like we already do for
XIVE.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156077920102.433243.6605099291134598170.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz
7abc0c6d35 xics/spapr: Detect old KVM XICS on POWER9 hosts
Older KVMs on POWER9 don't support destroying/recreating a KVM XICS
device, which is required by 'dual' interrupt controller mode. This
causes QEMU to emit a warning when the guest is rebooted and to fall
back on XICS emulation:

qemu-system-ppc64: warning: kernel_irqchip allowed but unavailable:
 Error on KVM_CREATE_DEVICE for XICS: File exists

If kernel irqchip is required, QEMU will thus exit when the guest is
first rebooted. Failing QEMU this late may be a painful experience
for the user.

Detect that and exit at machine init instead.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156044430517.125694.6207865998817342638.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Greg Kurz
d9293c4843 xics/spapr: Register RTAS/hypercalls once at machine init
QEMU may crash when running a spapr machine in 'dual' interrupt controller
mode on some older (but not that old, eg. ubuntu 18.04.2) KVMs with partial
XIVE support:

qemu-system-ppc64: hw/ppc/spapr_rtas.c:411: spapr_rtas_register:
 Assertion `!name || !rtas_table[token].name' failed.

XICS is controlled by the guest thanks to a set of RTAS calls. Depending
on whether KVM XICS is used or not, the RTAS calls are handled by KVM or
QEMU. In both cases, QEMU needs to expose the RTAS calls to the guest
through the "rtas" node of the device tree.

The spapr_rtas_register() helper takes care of all of that: it adds the
RTAS call token to the "rtas" node and registers a QEMU callback to be
invoked when the guest issues the RTAS call. In the KVM XICS case, QEMU
registers a dummy callback that just prints an error since it isn't
supposed to be invoked, ever.

Historically, the XICS controller was setup during machine init and
released during final teardown. This changed when the 'dual' interrupt
controller mode was added to the spapr machine: in this case we need
to tear the XICS down and set it up again during machine reset. The
crash happens because we indeed have an incompatibility with older
KVMs that forces QEMU to fallback on emulated XICS, which tries to
re-registers the same RTAS calls.

This could be fixed by adding proper rollback that would unregister
RTAS calls on error. But since the emulated RTAS calls in QEMU can
now detect when they are mistakenly called while KVM XICS is in
use, it seems simpler to register them once and for all at machine
init. This fixes the crash and allows to remove some now useless
lines of code.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <156044429963.125694.13710679451927268758.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-07-02 09:43:58 +10:00
Cédric Le Goater
3f777abc71 spapr/irq: add KVM support to the 'dual' machine
The interrupt mode is chosen by the CAS negotiation process and
activated after a reset to take into account the required changes in
the machine. This brings new constraints on how the associated KVM IRQ
device is initialized.

Currently, each model takes care of the initialization of the KVM
device in their realize method but this is not possible anymore as the
initialization needs to be done globaly when the interrupt mode is
known, i.e. when machine is reseted. It also means that we need a way
to delete a KVM device when another mode is chosen.

Also, to support migration, the QEMU objects holding the state to
transfer should always be available but not necessarily activated.

The overall approach of this proposal is to initialize both interrupt
mode at the QEMU level to keep the IRQ number space in sync and to
allow switching from one mode to another. For the KVM side of things,
the whole initialization of the KVM device, sources and presenters, is
grouped in a single routine. The XICS and XIVE sPAPR IRQ reset
handlers are modified accordingly to handle the init and the delete
sequences of the KVM device.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-15-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:46 +10:00
Cédric Le Goater
3bf84e99c8 spapr: check for the activation of the KVM IRQ device
The activation of the KVM IRQ device depends on the interrupt mode
chosen at CAS time by the machine and some methods used at reset or by
the migration need to be protected.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190513084245.25755-11-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:46 +10:00
Cédric Le Goater
56b11587df spapr: introduce routines to delete the KVM IRQ device
If a new interrupt mode is chosen by CAS, the machine generates a
reset to reconfigure. At this point, the connection with the previous
KVM device needs to be closed and a new connection needs to opened
with the KVM device operating the chosen interrupt mode.

New routines are introduced to destroy the XICS and the XIVE KVM
devices. They make use of a new KVM device ioctl which destroys the
device and also disconnects the IRQ presenters from the vCPUs.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-10-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:46 +10:00
David Gibson
ce2918cbc3 spapr: Use CamelCase properly
The qemu coding standard is to use CamelCase for type and structure names,
and the pseries code follows that... sort of.  There are quite a lot of
places where we bend the rules in order to preserve the capitalization of
internal acronyms like "PHB", "TCE", "DIMM" and most commonly "sPAPR".

That was a bad idea - it frequently leads to names ending up with hard to
read clusters of capital letters, and means they don't catch the eye as
type identifiers, which is kind of the point of the CamelCase convention in
the first place.

In short, keeping type identifiers look like CamelCase is more important
than preserving standard capitalization of internal "words".  So, this
patch renames a heap of spapr internal type names to a more standard
CamelCase.

In addition to case changes, we also make some other identifier renames:
  VIOsPAPR* -> SpaprVio*
    The reverse word ordering was only ever used to mitigate the capital
    cluster, so revert to the natural ordering.
  VIOsPAPRVTYDevice -> SpaprVioVty
  VIOsPAPRVLANDevice -> SpaprVioVlan
    Brevity, since the "Device" didn't add useful information
  sPAPRDRConnector -> SpaprDrc
  sPAPRDRConnectorClass -> SpaprDrcClass
    Brevity, and makes it clearer this is the same thing as a "DRC"
    mentioned in many other places in the code

This is 100% a mechanical search-and-replace patch.  It will, however,
conflict with essentially any and all outstanding patches touching the
spapr code.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-03-12 14:33:05 +11:00
Greg Kurz
6cead90c5c xics: Write source state to KVM at claim time
The pseries machine only uses LSIs to support legacy PCI devices. Every
PHB claims 4 LSIs at realize time. When using in-kernel XICS (or upcoming
in-kernel XIVE), QEMU synchronizes the state of all irqs, including these
LSIs, later on at machine reset.

In order to support PHB hotplug, we need a way to tell KVM about the LSIs
that doesn't require a machine reset. An easy way to do that is to always
inform KVM when an interrupt is claimed, which really isn't a performance
path.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155059668360.1466090.5969630516627776426.stgit@bahia.lab.toulouse-stg.fr.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-26 09:21:25 +11:00
Greg Kurz
3272752a8b xics: Drop the KVM ICS class
The KVM ICS class isn't used anymore. Drop it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023084177.1011724.14693955932559990358.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:52:08 +11:00
Greg Kurz
557b456729 xics: Handle KVM interrupt presentation from "simple" ICS code
We want to use the "simple" ICS type in both KVM and non-KVM setups.
Teach the "simple" ICS how to present interrupts to KVM and adapt
sPAPR accordingly.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023082996.1011724.16237920586343905010.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:43:19 +11:00
Greg Kurz
f1f5b701b8 xics: Handle KVM ICS reset from the "simple" ICS code
The KVM ICS reset handler simply writes the ICS state to KVM. This
doesn't need the overkill parent_reset logic we have today. Also
we want to use the same ICS type for the KVM and non-KVM case with
pseries.

Call icp_set_kvm_state() from the "simple" ICS reset function.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023082407.1011724.1983100830860273401.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:41:27 +11:00
Greg Kurz
d80b2ccfa7 xics: Explicitely call KVM ICS methods from the common code
The pre_save(), post_load() and synchronize_state() methods of the
ICSStateClass type are really KVM only things. Make that obvious
by dropping the indirections and directly calling the KVM functions
instead.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023081817.1011724.14078777320394028836.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:39:24 +11:00
Greg Kurz
8c1ced677d xics: Drop the KVM ICP class
The KVM ICP class isn't used anymore. Drop it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023081228.1011724.12474992370439652538.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:37:33 +11:00
Greg Kurz
8e6e6efef7 xics: Handle KVM ICP realize from the common code
The realization of KVM ICP currently follows the parent_realize logic,
which is a bit overkill here. Also we want to get rid of the KVM ICP
class. Explicitely call icp_kvm_realize() from the base ICP realize
function.

Note that ICPStateClass::parent_realize is retained because powernv
needs it.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023080049.1011724.15423463482790260696.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:34:05 +11:00
Greg Kurz
d82f397183 xics: Handle KVM ICP reset from the common code
The KVM ICP reset handler simply writes the ICP state to KVM. This
doesn't need the overkill parent_reset logic we have today. Call
icp_set_kvm_state() from the base ICP reset function instead.

Since there are no other users for ICPStateClass::parent_reset, and
it isn't currently expected to change, drop it as well.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023079461.1011724.12644984391500635645.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:29:55 +11:00
Greg Kurz
0e5c7fad9c xics: Explicitely call KVM ICP methods from the common code
The pre_save(), post_load() and synchronize_state() methods of the
ICPStateClass type are really KVM only things. Make that obvious
by dropping the indirections and directly calling the KVM functions
instead.

Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <155023078871.1011724.3083923389814185598.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-02-18 10:14:37 +11:00
Thomas Huth
a51d5afc69 ppc: Move spapr-related prototypes from xics.h into a seperate header file
When compiling with Clang in -std=gnu99 mode, there is a warning/error:

  CC      ppc64-softmmu/hw/intc/xics_spapr.o
In file included from /home/thuth/devel/qemu/hw/intc/xics_spapr.c:34:
/home/thuth/devel/qemu/include/hw/ppc/xics.h:203:34: error: redefinition of typedef 'sPAPRMachineState' is a C11 feature
      [-Werror,-Wtypedef-redefinition]
typedef struct sPAPRMachineState sPAPRMachineState;
                                 ^
/home/thuth/devel/qemu/include/hw/ppc/spapr_irq.h:25:34: note: previous definition is here
typedef struct sPAPRMachineState sPAPRMachineState;
                                 ^

We have to remove the duplicated typedef here and include "spapr.h" instead.
But "spapr.h" should not be included for the pnv machine files. So move
the spapr-related prototypes into a new file called "xics_spapr.h" instead.

Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-01-22 05:14:33 +01:00
Cédric Le Goater
872ff3dea3 spapr: move the qemu_irq array under the machine
The qemu_irq array is now allocated at the machine level using a sPAPR
IRQ set_irq handler depending on the chosen interrupt mode. The use of
this handler is slightly inefficient today but it will become necessary
when the 'dual' interrupt mode is introduced.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-09 09:28:14 +11:00
Cédric Le Goater
734d9c8905 ppc: export the XICS and XIVE set_irq handlers
To support the 'dual' interrupt mode, XICS and XIVE, we plan to move
the qemu_irq array of each interrupt controller under the machine and
do the allocation under the sPAPR IRQ init method.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-01-09 09:28:14 +11:00
Markus Armbruster
50beeb6809 Use error_fatal to simplify obvious fatal errors (again)
Add a slight improvement of the Coccinelle semantic patch from commit
007b06578a, and use it to clean up.  It leaves dead Error * variables
behind, cleaned up manually.

Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: Eric Blake <eblake@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20181017082702.5581-3-armbru@redhat.com>
2018-10-19 14:51:34 +02:00
Cédric Le Goater
abe82ebb20 ppc/xics: rework the ICS classes inheritance tree
With the previous changes, we can now let the ICS_KVM class inherit
directly from ICS_BASE class and not from the intermediate ICS_SIMPLE.
It makes the class hierarchy much cleaner.

What is left in the top classes is the low level interface to access
the KVM XICS device in ICS_KVM and the XICS emulating handlers in
ICS_SIMPLE.

This should not break migration compatibility.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
eeefd43b3c ppx/xics: introduce a parent_reset in ICSStateClass
Just like for the realize handlers, this makes possible to move the
common ICSState code of the reset handlers in the ics-base class.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
0a647b76db ppc/xics: introduce a parent_realize in ICSStateClass
This makes possible to move the common ICSState code of the realize
handlers in the ics-base class.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
a028dd423e ppc/xics: introduce ICP DeviceRealize and DeviceReset handlers
This changes the ICP realize and reset handlers in DeviceRealize and
DeviceReset handlers. parent handlers are now called from the
inheriting classes which is a cleaner object pattern.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-07-03 09:56:51 +10:00
Cédric Le Goater
52b438815e xics_kvm: fix a build break
On CentOS 7.5, gcc-4.8.5-28.el7_5.1.ppc64le fails to build QEMU due to :

  hw/intc/xics_kvm.c: In function ‘ics_set_kvm_state’:
  hw/intc/xics_kvm.c:281:13: error: ‘ret’ may be used uninitialized in this
    function [-Werror=maybe-uninitialized]
             return ret;

Fix the breakage and also remove the extra error reporting as
kvm_device_access() already provides a substantial error message.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16 16:32:33 +10:00
Cédric Le Goater
bf358b541b xics_kvm: use KVM helpers
The KVM helpers hide the low level interface used to communicate to
the XICS KVM device and provide a good cleanup to the XICS KVM models.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-12 10:44:36 +10:00
Greg Kurz
dcb556fc6a xics/kvm: synchonize state before 'info pic'
When using the emulated XICS, the 'info pic' monitor command shows:

CPU 0 XIRR=ff000000 ((nil)) PP=ff MFRR=ff
ICS 1000..13ff 0x10040060340
  1000 MSI 05 00
  1001 MSI 05 00
  1002 MSI 05 00
  1003 MSI ff 00
  1004 LSI ff 00
  1005 LSI ff 00
  1006 LSI ff 00
  1007 LSI ff 00
  1008 MSI 05 00
  1009 MSI 05 00
  100a MSI 05 00
  100b MSI 05 00
  100c MSI 05 00

but when using the in-kernel XICS with the very same guest, we get:

CPU 0 XIRR=00000000 ((nil)) PP=ff MFRR=ff
ICS 1000..13ff 0x10032e00340
  1000 MSI ff 00
  1001 MSI ff 00
  1002 MSI ff 00
  1003 MSI ff 00
  1004 LSI ff 00
  1005 LSI ff 00
  1006 LSI ff 00
  1007 LSI ff 00
  1008 MSI ff 00
  1009 MSI ff 00
  100a MSI ff 00
  100b MSI ff 00
  100c MSI ff 00

ie, all irqs are masked and XIRR is null, while we should get the
same output as with the emulated XICS.

If the guest is then migrated, 'info pic' shows the expected values
on both source and destination.

The problem is that QEMU doesn't synchronize with KVM before printing
the XICS state. Migration happens to fix the output because it enforces
synchronization with KVM.

To fix the invalid output of 'info pic', this patch introduces a new
synchronize_state operation for both ICPStateClass and ICSStateClass.
The ICP operation relies on run_on_cpu() in order to kick the vCPU
and avoid sleeping on KVM_GET_ONE_REG.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-11-14 11:12:42 +11:00
Greg Kurz
b1fd36c363 xics: drop ICPStateClass::cpu_setup() handler
The cpu_setup() handler is only implemented by xics_kvm, where it really
does a typical "realize" job. Moreover, the realize() handler is called
shortly after cpu_setup(), on the same path.

This patch converts xics_kvm to implement realize() instead of cpu_setup().

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-09 12:17:59 +10:00
Greg Kurz
100f738850 xics: pass appropriate types to realize() handlers.
It makes more sense to pass an IPCState * to handlers of ICPStateClass
instead of a DeviceState *, if only to benefit from compile time type
checking. The same goes with ICSStateClass.

While here, we also change the declaration of ICPStateClass in xics.h
for consistency.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-09 12:12:34 +10:00
Greg Kurz
a4d4edce7a xics: add reset() handler to ICPStateClass
Taking into account that qemu_set_irq() returns immediatly if its first
argument is NULL, icp_kvm_reset() largely duplicates icp_reset().

This patch introduces a reset() handler, so that the common logic can
be implemented in icp_reset() only.

While there we can also drop icp_kvm_realize() and icp_kvm_unrealize(). This
causes icp-kvm to be realized in icp_realize(), which sets icp->xics, but
it has no impact.

Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-06-08 14:38:27 +10:00
Greg Kurz
62f94fc94f xics: add unrealize handler
Now that ICPState objects get finalized on CPU unplug, we should unregister
reset handlers as well to avoid a QEMU crash at machine reset time.

Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-25 11:31:33 +10:00
Greg Kurz
de86eccc0c xics_kvm: cache already enabled vCPU ids
Since commit a45863bda9 ("xics_kvm: Don't enable KVM_CAP_IRQ_XICS if
already enabled"), we were able to re-hotplug a vCPU that had been hot-
unplugged ealier, thanks to a boolean flag in ICPState that we set when
enabling KVM_CAP_IRQ_XICS.

This could work because the lifecycle of all ICPState objects was the
same as the machine. Commit 5bc8d26de2 ("spapr: allocate the ICPState
object from under sPAPRCPUCore") broke this assumption and now we always
pass a freshly allocated ICPState object (ie, with the flag unset) to
icp_kvm_cpu_setup().

This cause re-hotplug to fail with:

Unable to connect CPU8 to kernel XICS: Device or resource busy

Let's fix this by caching all the vCPU ids for which KVM_CAP_IRQ_XICS was
enabled. This also drops the now useless boolean flag from ICPState.

Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-24 11:39:52 +10:00
Sam Bobroff
229e16fd24 ppc/xics: preserve P and Q bits for KVM IRQs
Kernel commit 17d48610ae0f ("KVM: PPC: Book 3S: XICS: Implement ICS
P/Q states") added new bits to the state used by KVM IRQs. Currently,
QEMU does not preserve these bits, so migrating (or otherwise saving
and restoring) the guest state causes the P and Q bits to be cleared.

Clearing the P bit has no effect, because the kernel will set it based
on other data, but the loss of a set Q bit will cause a lost
interrupt.

This patch preserves the P and Q bits, correcting the problem.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:15 +10:00
Sam Bobroff
063cb7cbc9 ppc/xics: Fix stale irq->status bits after get
ics_get_kvm_state() "or"s set bits into irq->status but does not mask
out clear bits.

Correct this by initializing the IRQ status to zero before adding bits
to it.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-11 09:45:15 +10:00
Cédric Le Goater
7ea6e06717 ppc/xics: register reset handlers for the ICP and ICS objects
The recent changes on the XICS layer removed the XICSState object to
let the sPAPR machine handle the ICP and ICS directly. The reset of
these objects was previously handled by XICSState, which was a SysBus
device, and to keep the same behavior, the ICP and ICS were assigned
to SysbBus.

But that broke the 'info qtree' command in the monitor. 'qtree'
performs a loop on the children of a bus to print their properties and
SysBus devices are expected to be found under SysBus, which is not the
case anymore.

The fix for this problem is to register reset handlers for the ICP and
ICS objects and stop using SysBus for such devices.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-06 10:07:38 +11:00
Cédric Le Goater
8e4fba203e ppc/xics: rename 'ICPState *' variables to 'icp'
'ICPState *' variables are currently named 'ss'. This is confusing, so
let's give them an appropriate name: 'icp'.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:40 +11:00
Cédric Le Goater
e6f7e110ee ppc/xics: remove the XICSState classes
The XICSState classes are not used anymore. They have now been fully
deprecated by the XICSFabric QOM interface. Do the cleanups.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:40 +11:00
Cédric Le Goater
2192a9303d ppc/xics: export the XICS init routines
There is nothing left related to the XICS object in the realize
functions of the KVMXICSState and XICSState class. So adapt the
interfaces to call these routines directly from the sPAPR machine init
sequence.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:40 +11:00
Cédric Le Goater
f023243432 ppc/xics: move the cpu_setup() handler under the ICPState class
The cpu_setup() handler is currently under the XICSState class but it
really belongs under ICPState as it is setting up an individual vCPU.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Cédric Le Goater
bf50860d1b ppc/xics: simplify the cpu_setup() handler
The cpu_setup() handler currently takes a 'XICSState *' argument to
grab the kernel ICP file descriptor. This interface can be simplified
by using the 'xics' backlink of the ICP object.

This change is also required by subsequent patches which makes use of
the QOM interface for XICS.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Cédric Le Goater
729f8a4f48 ppc/xics: move kernel_xics_fd out of KVMXICSState
The kernel ICP file descriptor is the only reason behind the
KVMXICSState class and it's in the way of more cleanups. Let's make it
a static for the moment and move forward.

If this is problem, we could use an attribute under the sPAPR machine
later on.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Cédric Le Goater
817bb6a446 ppc/xics: remove set_nr_servers() handler from XICSStateClass
Today, the ICP (Interrupt Controller Presenter) objects are created by
the 'nr_servers' property handler of the XICS object and a class
handler. They are realized in the XICS object realize routine.

Let's simplify the process by creating the ICP objects along with the
XICS object at the machine level.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Cédric Le Goater
4e4169f7a2 ppc/xics: remove set_nr_irqs() handler from XICSStateClass
Today, the ICS (Interrupt Controller Source) object is created and
realized by the init and realize routines of the XICS object, but some
of the parameters are only known at the machine level.

These parameters are passed from the sPAPR machine to the ICS object
in a rather convoluted way using property handlers and a class handler
of the XICS object. The number of irqs required to allocate the IRQ
state objects in the ICS realize routine is one of them.

Let's simplify the process by creating the ICS object along with the
XICS object at the machine level and link the ICS into the XICS list
of ICSs at this level also. In the sPAPR machine, there is only a
single ICS but that will change with the PowerNV machine.

Also, QOMify the creation of the objects and get rid of the
superfluous code.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-03-01 11:23:39 +11:00
Cédric Le Goater
2bb0d10aeb ppc/xics: add a xics_set_nr_servers common routine
xics_spapr and xics_kvm nearly define the same 'set_nr_servers'
handler. Only the type of the ICP differs. So let's make a common one
to remove some duplicated code.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-28 09:36:58 +11:00
Benjamin Herrenschmidt
d4d7a59a7a ppc/xics: Split ICS into ics-base and ics class
The existing implementation remains same and ics-base is introduced. The
type name "ics" is retained, and all the related functions renamed as
ics_simple_*

This will allow different implementations for the source controllers
such as the MSI support of PHB3 on Power8 which uses in-memory state
tables for example.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[ clg: added ICS_BASE_GET_CLASS and related fixes, based on :
       http://patchwork.ozlabs.org/patch/646010/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-14 16:31:02 +11:00
Benjamin Herrenschmidt
cc706a5305 ppc/xics: Make the ICSState a list
Instead of an array of fixed sized blocks, use a list, as we will need
to have sources with variable number of interrupts. SPAPR only uses
a single entry. Native will create more. If performance becomes an
issue we can add some hashed lookup but for now this will do fine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ move the initialization of list to xics_common_initfn,
  restore xirr_owner after migration and move restoring to
  icp_post_load]
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
[ clg: removed the icp_post_load() changes from nikunj patchset v3:
       http://patchwork.ozlabs.org/patch/646008/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-14 16:31:02 +11:00