The dirty bit is cleared after image repair succeeds in qed_open().
Move this into qed_check() so that all callers benefit from this
behavior when fix=true.
This is necessary so qemu-img check can call .bdrv_check() and mark the
image clean.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch updates the iscsi layer to automatically pick a 'unique'
initiator-name based on the name of the vm in case the user has not set
an explicit iqn-name to use.
Create a new function qemu_get_vm_name() that returns the name of the VM,
if specified.
This way we can thus create default names to use as the initiator name
based on the guest session.
If the VM is not named via the '-name' command line argument, the iscsi
initiator-name used wiull simply be
iqn.2008-11.org.linux-kvm
If a name for the VM was specified with the '-name' option, iscsi will
use a default initiatorname of
iqn.2008-11.org.linux-kvm:<name>
These names are just the default iscsi initiator name that qemu will
generate/use only when the user has not set an explicit initiator name
via the commandlines or config files.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
The argument of iscsi_create_context is never freed by libiscsi,
which in fact calls strdup on it. Avoid a leak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lazy refcounts is a performance optimization for qcow2 that postpones
refcount metadata updates and instead marks the image dirty. In the
case of crash or power failure the image will be left in a dirty state
and repaired next time it is opened.
Reducing metadata I/O is important for cache=writethrough and
cache=directsync because these modes guarantee that data is on disk
after each write (hence we cannot take advantage of caching updates in
RAM). Refcount metadata is not needed for guest->file block address
translation and therefore does not need to be on-disk at the time of
write completion - this is the motivation behind the lazy refcount
optimization.
The lazy refcount optimization must be enabled at image creation time:
qemu-img create -f qcow2 -o compat=1.1,lazy_refcounts=on a.qcow2 10G
qemu-system-x86_64 -drive if=virtio,file=a.qcow2,cache=writethrough
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds an incompatible feature bit to mark images that have not
been closed cleanly. When a dirty image file is opened a consistency
check and repair is performed.
Update qemu-iotests 031 and 036 since the extension header size changes
when we add feature bit table entries.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vvfat creates a virtual VFAT filesystem with a certain logical
geometry that depends on its options. It sets the "geometry hint" to
this geometry. It is the only block driver to do this.
The geometry hint is about about *physical* geometry, and used only by
certain hard disk device models.
vvfat's hint is normally invisible for device models, because
bdrv_open() puts a raw format on top of vvfat's fat protocol. That
raw format is where drive_init() puts the user's geometry (if any),
and where the device model gets it from.
Nobody complained, because the default physical geometry is the same
as vvfat's logical geometry:
opts LCHS def. PCHS
1024,16,63 same
:32: 1024,16,63 same
:16: 1024,16,63 same
:12: 64,16,63 same
Except when you specify :floppy:
opts LCHS def. PCHS
:floppy: 80, 2,36 5,16,63
:32:floppy: 80, 2,36 5,16,63
:16:floppy: 80, 2,36 5,16,63
:12:floppy: 80, 2,18 2,16,63
Silly thing to do for use with a hard disk.
However, the "raw" format can be suppressed by adding an
redundant-looking "format=vvfat" to "file=fat:FOO". Then, vvfat's
hint clobbers the user's geometry, i.e. -drive options cyls, heads,
secs get silently ignored. Don't do that.
No change without format=vvfat. With it, the user's hard disk
geometry (-drive options cyls, heads, secs) is now obeyed, and the
default hard disk geometry with :floppy: now matches the one without
format=vvfat.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unless parameter ":floppy:" is given, vvfat creates a virtual image
with DOS MBR defining a single partition which holds the FAT file
system. The size of the virtual image depends on the width of the
FAT: 32 MiB (CHS 64, 16, 63) for 12 bit FAT, 504 MiB (CHS 1024, 16,
63) for 16 and 32 bit FAT, leaving (64*16-1)*63 = 64449 and
(1024*16-1)*64 = 1032129 sectors for the partition.
However, it screws up the end of the partition in the MBR:
FAT width param. start CHS end CHS start LBA size
:32: 0,1,1 1023,14,63 63 1032065
:16: 0,1,1 1023,14,55 63 1032057
:12: 0,1,1 63,14,55 63 64377
The actual FAT file system nevertheless assumes the partition has
1032129 or 64449 sectors. Oops.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Only buffers that map to unallocated blocks need to be zeroed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kwolf/for-anthony: (24 commits)
block: Factor bdrv_read_unthrottled() out of guess_disk_lchs()
qtest: Tidy up temporary files properly
fdc: Drop broken code for user-defined floppy geometry
fdc_test: introduce test_sense_interrupt
fdc_test: update media_change test
fdc: fix interrupt handling
fdc: rewrite seek and DSKCHG bit handling
block: introduce bdrv_swap, implement bdrv_append on top of it
block: copy over job and dirty bitmap fields in bdrv_append
raw: hook into blkdebug
blkdebug: optionally tie errors to a specific sector
blkdebug: store list of active rules
blkdebug: pass getlength to underlying file
blkdebug: tiny cleanup
blkdebug: remove sync i/o events
sheepdog: traverse pending_list from the first for each time
sheepdog: split outstanding list into inflight and pending
sheepdog: make sure we don't free aiocb before sending all requests
sheepdog: use coroutine based socket functions in coroutine context
sheepdog: restart I/O when socket becomes ready in do_co_req()
...
This makes blkdebug scripts more powerful, and independent of the
exact sequence of operations performed by streaming.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This prepares for the next patch, where some active rules may actually
not trigger depending on input to readv/writev. Store the active rules
in a SIMPLEQ (so that it can be emptied easily with QSIMPLEQ_INIT), and
fetch the errno/once/immediately arguments from there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is required when using blkdebug with raw format. Unlike qcow2/QED,
raw asks blkdebug for the length of the file, it doesn't get it from
a header.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are unused, except (by mistake more or less) in QED.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The pending list can be modified in other coroutine context
sd_co_rw_vector, so we need to traverse the list from the first again
after we send the pending request.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
outstanding_list_head is used for both pending and inflight requests.
This patch splits it and improves readability.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch increments the pending counter before sending requests, and
make sures that aiocb is not freed while sending them.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This removes blocking network I/Os in coroutine context.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, no one reenters the yielded coroutine. This fixes it.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes warnings about dprintf format in debug mode.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When qcow2_alloc_clusters() error handling code was introduced in commit
5d757b563d, the value of free_byte_offset
was clobbered in the error case. This patch keeps free_byte_offset at 0
so we will try to allocate clusters again next time this function is
called.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The DEBUG_ALLOC qcow2.h macro enables additional consistency checks
throughout the code. This makes it easier to spot corruptions that are
introduced during development. Since consistency check is an expensive
operation the DEBUG_ALLOC macro is used to compile checks out in normal
builds and qcow2_check_refcounts() calls missed the addition of a new
function argument.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the device we open is a SMC or SSC device, then force the use of sg. We
dont have any medium changer or tape emulation so only passthrough via
real sg or scsi-generic via iscsi would work anyway.
Forcing sg also makes qemu skip trying to read from the device to guess
the image format by reading from the device (find_image_format()).
SMC devices do not implement READ6/10/12/16 so it is not possible to
read from them (SSC have different CDBs).
With this patch I can successfully manage a SMC device wiht iscsi in
passthrough mode.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[Added TYPE_TAPE handling - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update iscsi to allow passthrough of SG_IO scsi commands when the iscsi
device is forced to be scsi-generic.
Implement both bdrv_ioctl() and bdrv_aio_ioctl() in the iscsi backend,
emulate the SG_IO ioctl and pass the SCSI commands across to the
iscsi target.
This allows end-to-end passthrough of SCSI all the way from the guest,
to qemu, via scsi-generic, then libiscsi all the way to the iscsi target.
To activate this you need to specify that the iscsi lun should be treated
as a scsi-generic device.
Example:
-device lsi -device scsi-generic,drive=MyISCSI \
-drive file=iscsi://10.1.1.125/iqn.ronnie.test/1,if=none,id=MyISCSI
Note, you can currently not boot a qemu guest from a scsi device.
Note,
This only works when the host is linux, since the emulation relies on
definitions of SG_IO from the scsi-generic implementation in the
linux kernel.
It should be fairly easy to re-implement some structures similar enough
for non-linux hosts to do the same style of passthrough via a fake
scsi generic layer and libiscsi if need be.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the declaration of s into the #ifdef sections that actually make
use of it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The autoclear feature bits can be used for qcow2 file format features
that are safe to "drop" by old programs that do not understand the
feature. Upon opening the image file unknown autoclear feature bits are
cleared and the image file header is rewritten, but this was happening
too early in the code when critical header fields were not yet loaded.
Process autoclear feature bits after all necessary header information
has been loaded.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
avail_sectors should really be the number of sectors from the start of
the allocation, not from the start of the write request.
We're lucky enough that this mistake didn't cause any real bug.
avail_sectors is only used in the intialiser of QCowL2Meta:
.nb_available = MIN(requested_sectors, avail_sectors),
m->nb_available in turn is only used for COW at the end of the
allocation. A COW occurs only if the request wasn't cluster aligned,
which in turn would imply that requested_sectors was less than
avail_sectors (both in the original and in the fixed version). In this
case avail_sectors is ignored and therefore the mistake doesn't cause
any misbehaviour.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
copy_sectors() always uses the sum (cluster_offset + n_start) or
(start_sect + n_start), so if some value is added to both cluster_offset
and start_sect, and subtracted from n_start, it's cancelled out anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writethrough does not need special-casing anymore in the qcow2 caches.
The block layer adds flushes after every guest-initiated data write,
and these will also flush the qcow2 caches to the OS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Writeback caching was added in Ceph 0.46, and writethrough will be in
0.47. These are controlled by general config options, so there's no
need to check for librbd version.
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When any inconsistencies have been fixed, print the statistics and run
another check to make sure everything is correct now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().
This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
is_allocated_base has complex semantics that are not really usable
outside streaming. Split the check in two parts, where the allocated
state for the top bs is moved to the caller. The resulting function
is more generally useful.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Either FIEMAP, or SEEK_DATA+SEEK_HOLE can be used to implement the
is_allocated callback for raw files. On Linux ext4, btrfs and XFS
all support it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 3948d1d4 removed the pointer argument we filled in with l2_offset
but forgot to remove the unnecessary l2_offset assignment.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some gcc versions seem not to be able to figure out that the switch
statement covers all possible values and that c is therefore always
initialised. Add a default branch for them.
Reported-by: malc <av1474@comtv.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
The same as for non-coroutine versions in previous
patches: rename arguments to be more obvious, change
type of arguments from int to size_t where appropriate,
and use common code for send and receive paths (with
one extra argument) since these are exactly the same.
Use common iov_send_recv() directly.
qemu_co_sendv(), qemu_co_recvv(), and qemu_co_recv()
are now trivial #define's merely adding one extra arg.
qemu_co_sendv() and qemu_co_recvv() callers are
converted to different argument order and extra
`iov_cnt' argument.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It now allows specifying offset within qiov to start from and
amount of bytes to copy. Actual implementation is just a call
to iov_to_buf().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Similar to
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes);
the new prototype is:
qemu_iovec_from_buf(QEMUIOVector *qiov, size_t offset,
const void *buf, size_t bytes);
The processing starts at offset bytes within qiov.
This way, we may copy a bounce buffer directly to
a middle of qiov.
This is exactly the same function as iov_from_buf() from
iov.c, so use the existing implementation and rename it
to qemu_iovec_from_buf() to be shorter and to match the
utility function.
As with utility implementation, we now assert that the
offset is inside actual iovec. Nothing changed for
current callers, because `offset' parameter is new.
While at it, stop using "bounce-qiov" in block/qcow2.c
and copy decrypted data directly from cluster_data
instead of recreating a temp qiov for doing that.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch combines two functions into one, and replaces
the implementation with already existing iov_memset() from
iov.c.
The new prototype of qemu_iovec_memset():
size_t qemu_iovec_memset(qiov, size_t offset, int fillc, size_t bytes)
It is different from former qemu_iovec_memset_skip(), and
I want to make other functions to be consistent with it
too: first how much to skip, second what, and 3rd how many
of it. It also returns actual number of bytes filled in,
which may be less than the requested `bytes' if qiov is
smaller than offset+bytes, in the same way iov_memset()
does.
While at it, use utility function iov_memset() from
iov.h in posix-aio-compat.c, where qiov was used.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In snapshot mode, bdrv_open creates an empty temporary file without
checking for mkstemp or close failure, and ignoring the possibility
of a buffer overrun given a surprisingly long $TMPDIR.
Change the get_tmp_filename function to return int (not void),
so that it can inform its two callers of those failures.
Also avoid the risk of buffer overrun and do not ignore mkstemp
or close failure.
Update both callers (in block.c and vvfat.c) to propagate
temp-file-creation failure to their callers.
get_tmp_filename creates and closes an empty file, while its
callers later open that presumed-existing file with O_CREAT.
The problem was that a malicious user could provoke mkstemp failure
and race to create a symlink with the selected temporary file name,
thus causing the qemu process (usually root owned) to open through
the symlink, overwriting an attacker-chosen file.
This addresses CVE-2012-2652.
http://bugzilla.redhat.com/CVE-2012-2652
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_save_vmstate and bdrv_load_vmstate should return the vmstate size
on success, and -errno on error.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony:
fdc-test: introduced qtest no_media_on_start and cmos qtest for floppy
fdc: fix media detection
fdc: floppy drive should be visible after start without media
qemu-iotests: mark 035 qcow2-only
qcow2: Check qcow2_alloc_clusters_at() return value
sheepdog: use heap instead of stack for BDRVSheepdogState
sheepdog: return -errno on error
sheepdog: mark image as snapshot when tag is specified
qemu-img: Explain how rebase operation can be used to perform a 'diff' operation.
qcow2: don't leak buffer for unexpected qcow_version in header
This allows using LUNs bigger than 2TB. Keep using READ10 for other
device types such as MMC.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
This is needed to avoid READ CAPACITY(16) for MMC devices.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call qemu_notify_event() after updating events. Otherwise, If we add
an event for -is-writeable but the socket is already writeable there
may be a delay before the event callback is actually triggered.
Those delays would in particular hurt performance during BIOS boot and
when the GRUB bootloader reads the kernel and initrd.
But first call out to the socket write functions directly, and only set up
the write event if the socket is full. This will happen very rarely and
this improves performance.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
When using qcow2_alloc_clusters_at(), the cluster allocation code
checked the wrong variable for an error code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_create() is called in coroutine context now, so we cannot use
more stack than 1 MB in the function if we use ucontext coroutine.
This patch allocates BDRVSheepdogState, whose size is 4 MB, on the
heap in sd_create().
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On error, BlockDriver APIs should return -errno instead of -1.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When a snapshot tag is specified in the filename, the opened image is
a snapshot.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unallocated sectors should really never be accessed by the guest,
so there's no need to copy them during the streaming process.
If they are read by the guest during streaming, guest-initiated
copy-on-read will copy them (we're in the base == NULL case, which
enables copy on read). If they are read after we disconnect the
image from the base, they will read as zeroes anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes inability to make progress in streaming if the quota is set
to less than the amount of data that an I/O operation has to write.
In this case, limit->dispatched + n will always be above the quota and,
due to the "goto retry" to recheck cancellation and allocation, streaming
will livelock.
This can be reproduced with "block_job_set_speed ide0-hd0 1b". Of course,
with this patch the requested limit will not be obeyed. That could be
done with another patch that caps is_allocated's n argument by the slice
quota.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When an image is modified to point to the new backing file, the backing
file format is set to NULL, which means auto-probe. This is wrong, in
fact it is a small security problem.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The limitation on not having I/O after cancellation cannot really be
kept. Even streaming has a very small race window where you could
cancel a job and have it report completion. If this window is hit,
bdrv_change_backing_file() will yield and possibly cause accesses to
dangling pointers etc.
So, let's just assume that we cannot know exactly what will happen
after the coroutine has set busy to false. We can set a very lax
condition:
- if we cancel the job, the coroutine won't set it to false again
(and hence will not call co_sleep_ns again).
- block_job_cancel_sync will wait for the coroutine to exit, which
pretty much ensures no race.
Instead, we track the coroutine that executes the job and put very
strict conditions on what to do while it is quiescent (busy = false).
First of all, the coroutine must never set busy = false while the job
has been cancelled. Second, the coroutine can be reentered arbitrarily
while it is quiescent, so you cannot really do anything but co_sleep_ns at
that time. This condition is obeyed by the block_job_sleep_ns function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function abstracts the pretty complex semantics of the "busy"
member of BlockJob.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QED's opaque data includes a pointer back to the BlockDriverState.
This breaks when bdrv_append shuffles data between bs_new and bs_top.
To avoid this, add a "rebind" function that tells the driver about
the new relationship between the BlockDriverState and its opaque.
The patch also adds rebind to VVFAT for completeness, even though
it is not used with live snapshots.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These are needed to print "info block" output correctly. QCOW2 does this
because it needs it to write the header, but QED does not, and common code
is the right place to do it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This check applies to all drivers, but QED lacks it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony:
fdc: simplify media change handling
qcow2: lock on prealloc
block: make bdrv_create adopt coroutine
qcow2: Limit COW to where it's needed
sheepdog: switch to writethrough mode if cluster doesn't support flush
preallocate() will be locked. This is required because
qcow2_alloc_cluster_link_l2() assumes that it runs under a lock that it
can drop while COW is being performed.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes a regression introduced in commit 250196f1. The bug leads to
data corruption, found during an Autotest run with a Fedora 8 guest.
Consider a write request whose first part is covered by an already
allocated cluster, but additional clusters need to be newly allocated.
When counting the number of clusters to allocate, the qcow2 code would
decide to do COW for all remaining clusters of the write request, even
if some of them are already allocated.
If during this COW operation another write request is issued that touches
the same cluster, it will still refer to the old cluster. When the COW
completes, the first request will update the L2 table and the second
write request will be lost. Note that the requests need not overlap, it's
enough for them to touch the same cluster.
This patch ensures that only clusters that really require COW are
considered for allocation. In this case any other request writing to the
same cluster will be an allocating write and gets serialised.
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Tested-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is necessary for qemu to work with the older version of Sheepdog
which doesn't support SD_OP_FLUSH_VDI.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Update the configure test for libiscsi support to detect version 1.3
or later. Version 1.3 of libiscsi provides both READCAPACITY16 as well
as UNMAP commands.
Update the iscsi block layer to use READCAPACITY16 to detect the size of
the LUN instead of READCAPACITY10. This allows support for LUNs larger
than 2TB.
Update to implement bdrv_aio_discard() using the UNMAP command.
This allows us to use thin-provisioned LUNs from TGTD and other iSCSI
targets that support thin-provisioning.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[squashed in subsequent patch from Ronnie to fix off-by-one in LBA count]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the write flag to an operation type in RBDAIOCB, and make the
buffer optional since discard doesn't use it.
Discard is first included in librbd 0.1.2 (which is in Ceph 0.46).
If librbd is too old, leave out qemu_rbd_aio_discard entirely,
so the old behavior is preserved.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If cache references are held while the coroutine has yielded, the cache
may get used up and abort() when it can't find a free entry.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use __APPLE__ and __MACH__ macros instead of CONFIG_COCOA to detect Mac
OS X host. The patch is based on Ben Leslie's patch:
http://patchwork.ozlabs.org/patch/97859/
Signed-off-by: Ben Leslie <benno@benno.id.au>
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
* qmp/queue/qmp:
qapi: fix qmp_balloon() conversion
qemu-iotests: add block-stream speed value test case
block: add 'speed' optional parameter to block-stream
block: change block-job-set-speed argument from 'value' to 'speed'
block: use Error mechanism instead of -errno for block_job_set_speed()
block: use Error mechanism instead of -errno for block_job_create()
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed. Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
There are at least two different errors that can occur in
block_job_set_speed(): the job might not support setting speeds or the
value might be invalid.
Use the Error mechanism to report the error where it occurs.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The block job API uses -errno return values internally and we convert
these to Error in the QMP functions. This is ugly because the Error
should be created at the point where we still have all the relevant
information. More importantly, it is hard to add new error cases to
this case since we quickly run out of -errno values without losing
information.
Go ahead and use Error directly and don't convert later.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
s->sock is assigned only afterwards, so we're really registering an
aio_fd_handler for file descriptor 0 here. Not exactly what we intended.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kwolf/for-anthony: (38 commits)
qemu-iotests: Fix test 031 for qcow2 v3 support
qemu-iotests: Add -o and make v3 the default for qcow2
qcow2: Zero write support
qemu-iotests: Test backing file COW with zero clusters
qemu-iotests: add a simple test for write_zeroes
qcow2: Support for feature table header extension
qcow2: Support reading zero clusters
qcow2: Version 3 images
qcow2: Ignore reserved bits in check_refcounts
qcow2: Ignore reserved bits in refcount table entries
qcow2: Simplify count_cow_clusters
qcow2: Refactor qcow2_free_any_clusters
qcow2: Ignore reserved bits in L1/L2 entries
qcow2: Fail write_compressed when overwriting data
qcow2: Ignore reserved bits in count_contiguous_clusters()
qcow2: Ignore reserved bits in get_cluster_offset
qcow2: Save disk size in snapshot header
Specification for qcow2 version 3
qcow2: Fix refcount block allocation during qcow2_alloc_cluster_at()
iotests: Resolve test failures caused by hostname
...
Instead of printing an ugly bitmask, qemu can now print a more helpful
string even for yet unknown features.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the basic infrastructure to qcow2 to handle version 3 images.
It includes code to create v3 images, allow header updates for v3 images
and checks feature bits.
It still misses support for zero clusters, so this is not a fully
compliant implementation of v3 yet.
The default for creating new images stays at v2 for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also don't infer the cluster type directly from the L2 entries, but use
qcow2_get_cluster_type() to keep everything in a single place.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
count_cow_clusters() tries to reuse existing functions, and all it
achieves is to make things much more complicated than they really are:
Everything needs COW, unless it's a normal cluster with refcount 1.
This patch implements the obvious way of doing this, and by using
qcow2_get_cluster_type() it gets rid of all flag magic.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zero clusters will add another cluster type. Refactor the open-coded
cluster type detection into a switch of QCOW2_CLUSTER_* options so that
the detection is in a single place. This makes it easier to add new
cluster types.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This changes the still existing places that assume that the only flags
are QCOW_OFLAG_COPIED and QCOW_OFLAG_COMPRESSED to properly mask out
reserved bits.
It does not convert bdrv_check yet.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qcow2_alloc_compressed_cluster_offset() already fails if the copied flag
is set, because qcow2_write_compressed() doesn't perform COW as it would
have to do to allow this.
However, what we really want to check here is whether the cluster is
allocated or not. With internal snapshots the copied flag may not be set
on allocated clusters. Check the cluster offset instead.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Until now, count_contiguous_clusters() has an argument that allowed to
specify flags that should be ignored in the comparison, i.e. that are
allowed to change between contiguous clusters.
This patch changes the function so that it ignores all flags by default
now and you need to pass the flags on which it should stop.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With this change, reading from a qcow2 image ignores all reserved bits
that are set in an L1 or L2 table entry.
Now get_cluster_offset() assigns *cluster_offset only the offset without
any other flags. The cluster type is not longer encoded in the offset,
but a positive return value in case of success.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This allows that different snapshots of an image can have different
sizes, which is a requirement for enabling image resizing even with
images that have internal snapshots.
We don't do the actual support for it now, but make sure that the
additional field is present and not completely ignored in all version 3
images. When trying to load a snapshot of different size, it returns
an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcount block allocation and refcount table growth rely on
s->free_cluster_index pointing to somewhere after the current
allocation. Change qcow2_alloc_cluster_at() to fulfill this
assumption.
Without this change it could happen that a newly allocated refcount
block and the allocated data block point to the same area in the image
file, causing data corruption in the long run.
This fixes a bug that became first visible after commit 250196f1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now, nbd_wr_sync will hang if no data at all is available on the
socket and the other side is not going to provide any. Relax this by
making it loop only for writes or partial reads. This fixes a race
where one thread is executing qemu_aio_wait() and another is executing
main_loop_wait(). Then, the select() call in main_loop_wait() can return
stale data and call the "readable" callback with no data in the socket.
Reported-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the next patch we need to look at the return code of nbd_wr_sync.
To avoid percolating the socket_error() ugliness all around, let's
handle errors by returning negative errno values.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Someone forgot something in commit 29c1a730... Documenting the right
return value is not enough, you also need to actually return it in the
code.
This bug sometimes causes error return values even when everything has
succeeded: The new offset of the refcount block is truncated to 32 bits
and interpreted as signed. At least with small cluster sizes it's easy
to get a negative return value this way.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
If do_alloc_cluster_offset() fails, the error handling code tried to
remove the request from the in-flight queue, to which it wasn't added
yet, resulting in a NULL pointer dereference.
m->nb_clusters really only becomes != 0 when the request is in the list.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* kwolf/for-anthony: (46 commits)
qed: remove incoming live migration blocker
qed: honor BDRV_O_INCOMING for incoming live migration
migration: clear BDRV_O_INCOMING flags on end of incoming live migration
qed: add bdrv_invalidate_cache to be called after incoming live migration
blockdev: open images with BDRV_O_INCOMING on incoming live migration
block: add a function to clear incoming live migration flags
block: Add new BDRV_O_INCOMING flag to notice incoming live migration
block stream: close unused files and update ->backing_hd
qemu-iotests: Fix call syntax for qemu-io
qemu-iotests: Fix call syntax for qemu-img
qemu-iotests: Test unknown qcow2 header extensions
qemu-iotests: qcow2.py
sheepdog: fix send req helpers
sheepdog: implement SD_OP_FLUSH_VDI operation
block: bdrv_append() fixes
qed: track dirty flag status
qemu-img: add dirty flag status
qed: image fragmentation statistics
qemu-img: add image fragmentation statistics
block: document job API
...
From original commit with Patchwork-id: 31108 by
Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
"The QED image format includes a file header bit to mark images dirty.
QED normally checks dirty images on open and fixes inconsistent
metadata. This is undesirable during live migration since the dirty bit
may be set if the source host is modifying the image file. The check
should be postponed until migration completes.
Skip operations that modify the image file if the BDRV_O_INCOMING flag
is set."
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The QED image is reopened to flush metadata and check consistency.
Signed-off-by: Benoit Canet <benoit.canet@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Close the now unused images that were part of the previous backing file
chain and adjust ->backing_hd, backing_filename and backing_format
properly.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=801449
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should return if reading of the header fails.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Flush operation is supposed to flush the write-back cache of
sheepdog cluster.
By issuing flush operation, we can assure the Guest of data
reaching the sheepdog cluster storage.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Liu Yuan <tailai.ly@taobao.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is no need to do this in every implementation of set_speed
(even though there is only one right now).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Streaming can issue I/O while qcow2_close is running. This causes the
L2 caches to become very confused or, alternatively, could cause a
segfault when the streaming coroutine is reentered after closing its
block device. The fix is to cancel streaming jobs when closing their
underlying device.
The cancellation must be synchronous, on the other hand qemu_aio_wait
will not restart a coroutine that is sleeping in co_sleep. So add
a flag saying whether streaming has in-flight I/O. If the busy flag
is false, the coroutine is quiescent and, when cancelled, will not
issue any new I/O.
This protects streaming against closing, but not against deleting.
We have a reference count protecting us against concurrent deletion,
but I still added an assertion to ensure nothing bad happens.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Finally reindent all code and change goto statements to a loop.
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reads and writes to the underlying file can also occur with the simple
non-vectored I/O interfaces.
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vdi.c really works as if it implemented bdrv_read and bdrv_write. However,
because only vector I/O is supported by the asynchronous callbacks, it
went through extra pain to bounce-buffer the I/O. This can be handled
by the block layer now that the format is coroutine-based.
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most of the AIOCB really holds local variables that need to persist
across callback invocation. It can go away now.
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now inline the former AIO callbacks into vdi_co_readv and vdi_co_writev.
While many cleanups are possible, the code now really looks synchronous.
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The next step is to take code that only triggers after the first operation,
and move it at the end of vdi_aio_read_cb and vdi_aio_write_cb.
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Even a basic conversion changing the bdrv_aio_readv/bdrv_aio_writev calls
to bdrv_co_readv/bdrv_co_writev, and callbacks to goto statements can
eliminate a lot of code. This is because error handling is simplified
and indirections through bottom halves can go away.
After this patch, I/O to the underlying file already happens via
coroutines, but the code still looks a lot like if asynchronous I/O was
being used.
Acked-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
After validation check, the 'checksum' is not written back
to footer, which leave it with zero.
This results in errors while loadding it under Microsoft's
Hyper-V environment, and also errors from utilities like
Citrix's vhd-util.
Signed-off-by: Zhang Shengju <sean_zhang@trendmicro.com.cn>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since everything goes through the cache, callers don't use the L2 table
offset any more.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The function usleep is not available for all supported platforms:
at least some versions of MinGW don't support it.
usleep was also declared obsolete by POSIX.1-2001.
The function g_usleep is part of glib2.0, so it is available for
all supported platforms.
Using nanosleep would also be possible but needs more code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If the first part of a write request is allocated, but the second isn't
and it can be allocated so that the resulting area is contiguous, handle
it at once. This is a common case for sequential writes.
After this patch, alloc_cluster_offset() only checks if the clusters are
already allocated or how many new clusters can be allocated contigouosly.
The actual cluster allocation is split off into a new function
do_alloc_cluster_offset().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This function allows to allocate clusters at a given offset in the image
file. This is useful if you want to allocate the second part of an area
that must be contiguous.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
qemu-img resize has some limitations with qcow2, but the user is only
told that "this image format does not support resize". Quite confusing,
so add some more detailed error_report() calls and change "this image
format" into "this image".
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The L2 table cache reduces QED metadata reads that would be required
when translating LBAs to offsets into the image file. Since requests
execute in parallel it is possible to share an L2 table between multiple
requests.
There is a potential data corruption issue when an in-use L2 table is
evicted from the cache because the following situation occurs:
1. An allocating write performs an update to L2 table "A".
2. Another request needs L2 table "B" and causes table "A" to be
evicted.
3. A new read request needs L2 table "A" but it is not cached.
As a result the L2 update from #1 can overlap with the L2 fetch from #3.
We must avoid doing overlapping I/O requests here since the worst case
outcome is that the L2 fetch completes before the L2 update and yields
stale data. In that case we would effectively discard the L2 update and
lose data clusters!
Thanks to Benoît Canet <benoit.canet@gmail.com> for extensive testing
and debugging which lead to discovery of this bug.
Reported-by: Benoît Canet <benoit.canet@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Benoît Canet <benoit.canet@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Image files that make qemu-img info read several gigabytes into the
unknown header extensions list are bad. Just fail opening the image
if an extension claims to be larger than the header extension area.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The spec says that the length of extensions is padded to 8 bytes, not
the offset. Currently this is the same because the header size is a
multiple of 8, so this is only about compatibility with future changes
to the header size.
While touching it, move the calculation to a common place instead of
duplicating it for each header extension type.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The co_recv coroutine has two things that will try to enter it:
1. The select(2) read callback on the sheepdog socket.
2. The aio_add_request() blocking operations, including a coroutine
mutex.
This patch fixes it by setting NULL to co_recv before sending data.
In future, we should make the sheepdog driver fully coroutine-based
and simplify request handling.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we want header extensions to work as compatible extensions, we can't
destroy yet unknown header extensions when rewriting the header (e.g.
for changing the backing file). Save all unknown header extensions in a
list of blobs and include them in a new header.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to switch the backing file, qcow2 issues multiple write
requests that only changed a part of the image header. Any failure after
the first one would leave the header in an corrupted state. With this
patch, the whole header is written at once, so we can't fail in the
middle.
At the same time, this gives us a reusable functions that updates all
fields of the qcow2 header and not only the backing file.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The geometry calculation algorithm from the VHD spec rounds the image
size down if it doesn't exactly match a geometry. During image
conversion, this causes the image to be truncated. For dynamic images,
we already have code in place to round up instead, let's do the same for
fixed images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Virtual Hard Disk Image Format Specification allows for three
types of hard disk formats, Fixed, Dynamic, and Differencing. Qemu
currently only supports Dynamic disks. This patch adds support for
the Fixed Disk format.
Usage:
Example 1: qemu-img create -f vpc -o type=fixed <filename> [size]
Example 2: qemu-img convert -O vpc -o type=fixed <input filename> <output filename>
While it is also allowed to specify '-o type=dynamic', the default disk type
remains Dynamic and is what is used when the type is left unspecified.
Signed-off-by: Charles Arnold <carnold@suse.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds configuration variables for iSCSI to set
initiator-name to use when logging in to the target,
which type of header-digest to negotiate with the target
and username and password for CHAP authentication.
This allows specifying a initiator-name either from the command line
-iscsi initiator-name=iqn.2004-01.com.example:test
or from a configuration file included with -readconfig
[iscsi]
initiator-name = iqn.2004-01.com.example:test
header-digest = CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
user = CHAP username
password = CHAP password
If you use several different targets, you can also configure this on a per
target basis by using a group name:
[iscsi "iqn.target.name"]
...
The configuration file can be read using -readconfig.
Example :
qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.ronnie.test/1
-readconfig iscsi.conf
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Zero writes are a dedicated interface for writing regions of zeroes into
the image file. If clusters are not yet allocated it is possible to use
an efficient metadata representation which keeps the image file compact
and does not store individual zero bytes.
Implementing this for the QED image format is fairly straightforward.
The only issue is that when a zero write touches an existing cluster we
have to allocate a bounce buffer and perform a regular write.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Per-request attributes like read/write are currently implemented as bool
fields in the QEDAIOCB struct. This becomes unwiedly as the number of
attributes grows. For example, the qed_aio_setup() function would have
to take multiple bool arguments and at call sites it would be hard to
distinguish the meaning of each bool.
Instead use a flags field with bitmask constants. This will be used
when zero write support is added.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since common file operation functions lack of error detection and use
much more I/O syscalls, so change them to bdrv series functions and
reduce I/O request.
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new block was filled with zero when it was allocated by g_malloc0,
but when it was reused later and only partially used, data from the
previously allocated block were still present and written to the new
block.
This caused the problems reported by bug #919242
(https://bugs.launchpad.net/qemu/+bug/919242).
Now the unused parts of the new block which are before and after the data
are always filled with zero, so it is no longer necessary to zero the whole
block with g_malloc0.
I also updated the copyright comment.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add support for streaming data from an intermediate section of the
image chain (see patch and documentation for details).
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch implements rate-limiting for image streaming. If we've
exceeded the bandwidth quota for a 100 ms time slice we sleep the
coroutine until the next slice begins.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Most of the codebase as been converted to use glib memory allocation
functions. There are still a few instances of malloc/calloc in the
block layer and qemu-io. Replace them, especially since they do not
check the strdup/malloc/calloc return value.
Reported-by: Dr David Alan Gilbert <davidagilbert@uk.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Greg Farnum <gregory.farnum@dreamhost.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow sending up to 16 requests, and drive the replies to the coroutine
that did the request. The code is written to be exactly the same as
before this patch when MAX_NBD_REQUESTS == 1 (modulo the extra mutex
and state).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu-nbd has a limit of slightly less than 1M per request. Work
around this in the nbd block driver.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Outside coroutines, avoid busy waiting on EAGAIN by temporarily
making the socket blocking.
The API of qemu_recvv/qemu_sendv is slightly different from
do_readv/do_writev because they do not handle coroutines. It
returns the number of bytes written before encountering an
EAGAIN. The specificity of yielding on EAGAIN is entirely in
qemu-coroutine.c.
Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The caller expects psn_tab to be NULL when there are no snapshots or
an error occurs. This results in calling g_free on an invalid address.
Reported-by: Oliver Francke <Oliver@filoo.de>
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E = qemu_aio_get (...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed occurrences in linux-aio.c and posix-aio-compat.c.
Those were done by hand.
The change in vdi_aio_setup's caller was also done by hand.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Double semicolons should be single.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that bdrv_co_is_allocated() is available we can use it instead of
the synchronous bdrv_is_allocated() interface. This is a follow-up that
Kevin Wolf <kwolf@redhat.com> pointed out after applying the series that
introduces bdrv_co_is_allocated().
It is safe to make cow_read() a coroutine_fn because its only caller is
a coroutine_fn.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's common to wake up all waiting coroutines. Introduce the
qemu_co_queue_restart_all() function to do this instead of looping over
qemu_co_queue_next() in every caller.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The cow block driver does not keep internal state for cluster lookups.
This means it is safe to perform cluster lookups in coroutine context
without risk of race conditions that corrupt internal state.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is trivial to switch from the synchronous .bdrv_is_allocated()
interface to .bdrv_co_is_allocated() since vdi_is_allocated() does not
block.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is trivial to switch from the synchronous .bdrv_is_allocated()
interface to .bdrv_co_is_allocated() since vvfat_is_allocated() does not
block.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The qcow2, qcow, and vmdk block drivers are based on coroutines. They have a
coroutine mutex which protects internal state. We can convert the
.bdrv_is_allocated() function to .bdrv_co_is_allocated() by holding the mutex
around the cluster lookup operation.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The bdrv_qed_is_allocated() function is a synchronous wrapper around
qed_find_cluster(), which performs the cluster lookup. In order to
convert the synchronous function to a coroutine function we yield
instead of using qemu_aio_wait(). Note that QED's cache is already safe
for parallel requests so no locking is needed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the bdrv_read() of the snapshot's L1 table fails, return the right
error code and make sure that the old L1 table is still loaded and we
don't break the BlockDriverState completely.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
First the snapshot must be deleted and only then the refcounts can be
decreased.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The refcount updates must be moved so that in the worst case we can get
cluster leaks, but refcounts may never be too low.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Besides fixing the return code, this adds some comments that make clear
how the code works and that it potentially breaks images if we fail in
the wrong place. Actually fixing this is left for the next patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Increase refcounts only after allocating a new L1 table has succeeded in
order to make leaks less likely. If writing the snapshot table fails,
revert in-memory state to be consistent with that on disk.
While at it, make it return the real error codes instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
sn->id_str could be leaked before this. The rest of this patch changes
comments, fixes coding style or removes checks that are unnecessary with
g_malloc.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Failing in the middle wouldn't help with the integrity of the image, so
doing everything in a single request seems better.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Doesn't immediately fix anything as the callers don't use the return
value, but they will be fixed next.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Looks better when reviewing these source files.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since common file operation functions lack of error detection,
so change them to bdrv series functions.
Signed-off-by: Li Zhi Hui <zhihuili@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch is only to refactor some lines of codes to get better and more robust codes.
As you have seen, in qed_read_table_cb() it's nice to
use qiov->size because that function doesn't obviously use a single
struct iovec.
In other two functions, if qiov use more than one struct iovec, the existing way will get wrong nb_sectors.
To make the code more robust, it will be nicer to refactor the existing way as below.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A BlockDriverState should not issue requests on itself through the
public block layer interface. Nested, or reentrant, requests are
problematic because they do I/O throttling and request tracking twice.
Features like block layer copy-on-read use request tracking to avoid
race conditions between concurrent requests. The reentrant request will
have to "wait" for its parent request to complete. But the parent is
waiting for the reentrant request to make progress so we have reached
deadlock.
The solution is for block drivers to avoid the public block layer
interfaces for reentrant requests. Instead they should call their own
internal functions if they wish to perform reentrant requests.
This is also a good opportunity to make copy_sectors() a true
coroutine_fn. That means calling bdrv_co_writev() instead of
bdrv_write(). Behavior is unchanged but we're being explicit that this
executes in coroutine context.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unlocking during COW allows for more parallelism. One change it requires is
that buffers are dynamically allocated instead of just using a per-image
buffer.
While touching the code, drop the synchronous qcow2_read() function and replace
it by a bdrv_read() call.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
vvfat caches more or less everything when in writable mode. For migration
to work, it would have to be invalidated. Block migration for now when
in writable mode (default is readonly).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vdi caches the block map. For migration to work, it would have to be
invalidated. Block migration for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
s->lock should be unlocked before leaving add_aio_request.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
zlib.h is not a local include file, therefore it should be included
using <> instead of "".
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now when you try to migrate with qed, you get:
(qemu) migrate tcp:localhost:1025
Block format 'qed' used by device 'ide0-hd0' does not support feature 'live migration'
(qemu)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We don't reopen the actual file, but instead invoke the close and open routines.
We specifically ignore the backing file since it's contents are read-only and
therefore immutable.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qcow2 has a writeback metadata cache, so flushing a qcow2 image actually
consists of writing back that cache to the protocol and only then flushes the
protocol in order to get everything stable on disk.
This introduces a separate bdrv_co_flush_to_os to reflect the split.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two different types of flush that you can do: Flushing one level up
to the OS (i.e. writing data to the host page cache) or flushing it all the way
down to the disk. The existing functions flush to the disk, reflect this in the
function name.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The Data Offset field in the Dynamic Disk Header is an 8 byte field.
Although the specification (2006-10-11) gives an example of initializing
only the first 4 bytes, images generated by Microsoft on Windows initialize
all 8 bytes.
Failure to initialize all 8 bytes results in errors from utilities
like Citrix's vhd-util which checks specifically for the proper Data
Offset field initialization.
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vvfat used to directly call into the qcow2 block driver instead of using the
block.c wrappers. With the coroutine conversion, this stopped working.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
First determine FAT12/16/32, then compute geometry from that for both
FDD and HDD. For 1.44MB floppies, and 2.88MB floppies using FAT16,
change to 1 sector/cluster. The default remains 2.88MB with FAT12
and 2 sectors/cluster. Both DOS and mkdosfs by default format a 2.88MB
floppy as FAT12.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The sector count is stored in the partition and hence must not include the
sectors before its start. At the same time, remove the useless special
casing for 1.44 MB floppies. This fixes fsck on VVFAT hard disks,
which otherwise tries to seek past the end of the disk.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is consistent with what "real" floppies have, so file(1)
now actually recognizes the VVFAT image as a 1.44 MB floppy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If the number of "faked sectors" + the number of sectors that are
part of a cluster does not sum up to the total number of sectors,
qemu-img convert fails. Read these spare sectors as all zeros.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When reading the address of the first free entry, you cannot
use array_get without first marking all entries as occupied.
This is visible if you change the sectors per cluster on a
floppy from 2 to 1.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix mismatching allocation and deallocation: g_free should be used to pair with
g_malloc.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed_by: Ray Wang <raywang@linux.vnet.ibm.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix coding style in block/cloop.c.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed_by: Ray Wang <raywang@linux.vnet.ibm.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_cache_flush failed, s->lock will not be unlock.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Data we read from the disk isn't necessarily null terminated and may not
contain the string we're looking for. The code needs to be a bit more careful
here.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
An entry in the VDI block map will hold an offset to the actual block if
the block is allocated, or one of two specially-interpreted values if
not allocated. Using VirtualBox terminology, value VDI_IMAGE_BLOCK_FREE
(0xffffffff) represents a never-allocated block (semantically arbitrary
content). VDI_IMAGE_BLOCK_ZERO (0xfffffffe) represents a "discarded"
block (semantically zero-filled). block/vdi knows only about
VDI_IMAGE_BLOCK_FREE. Teach it about VDI_IMAGE_BLOCK_ZERO.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This provides built-in support for iSCSI to QEMU.
This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices.
It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host.
This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at
git://github.com/sahlberg/libiscsi.git
The patch adds the driver to interface with the iscsi library.
It also updated the configure script to
* by default, probe is libiscsi is available and if so, build
qemu against libiscsi.
* --enable-libiscsi
Force a build against libiscsi. If libiscsi is not available
the build will fail.
* --disable-libiscsi
Do not link against libiscsi, even if it is available.
When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host.
You can specify devices using a iscsi url of the form :
iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun>
When using authentication, the password can optionally be set with
LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
'ret' is unconditionally overwitten by qed_read_l1_table_sync()
Spotted by Clang Analyzer
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Spotted by Clang Analyzer
[Note this memcpy call has always been safe because the length will be 0
when the pointer is NULL]
Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Since coroutine operation is now mandatory, convert both bdrv_discard
implementations to coroutines. For qcow2, this means taking the lock
around the operation. raw-posix remains synchronous.
The bdrv_discard callback is then unused and can be eliminated.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since coroutine operation is now mandatory, convert all bdrv_flush
implementations to coroutines. For qcow2, this means taking the lock.
Other implementations are simpler and just forward bdrv_flush to the
underlying protocol, so they can avoid the lock.
The bdrv_flush callback is then unused and can be eliminated.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This does the first part of the conversion to coroutines, by
wrapping bdrv_write implementations to take the mutex.
Drivers that implement bdrv_write rather than bdrv_co_writev can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This does the first part of the conversion to coroutines, by
wrapping bdrv_read implementations to take the mutex.
Drivers that implement bdrv_read rather than bdrv_co_readv can
then benefit from asynchronous operation (at least if the underlying
protocol supports it, which is not the case for raw-win32), even
though they still operate with a bounce buffer.
raw-win32 does not need the lock, because it cannot yield.
nbd also doesn't probably, but better be safe.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The big conversion of bdrv_read/write to coroutines caused the two
homonymous callbacks in BlockDriver to become reentrant. It goes
like this:
1) bdrv_read is now called in a coroutine, and calls bdrv_read or
bdrv_pread.
2) the nested bdrv_read goes through the fast path in bdrv_rw_co_entry;
3) in the common case when the protocol is file, bdrv_co_do_readv calls
bdrv_co_readv_em (and from here goes to bdrv_co_io_em), which yields
until the AIO operation is complete;
4) if bdrv_read had been called from a bottom half, the main loop
is free to iterate again: a device model or another bottom half
can then come and call bdrv_read again.
This applies to all four of read/write/flush/discard. It would also
apply to is_allocated, but it is not used from within coroutines:
besides qemu-img.c and qemu-io.c, which operate synchronously, the
only user is the monitor. Copy-on-read will introduce a use in the
block layer, and will require converting it.
The solution is "simply" to convert all drivers to coroutines! We
just need to add a CoMutex that is taken around affected operations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move vmdk_parent_open to vmdk_open. There's another path how
vmdk_parent_open can be reached:
vmdk_parse_extents() -> vmdk_open_sparse() -> vmdk_open_vmdk4() ->
vmdk_open_desc_file().
If that can happen, however, the code is bogus. vmdk_parent_open
reads from bs->file:
if (bdrv_pread(bs->file, s->desc_offset, desc, DESC_SIZE) != DESC_SIZE) {
but it is always called with s->desc_offset == 0 and with the same
bs->file. So the data that vmdk_parent_open reads comes always from the
same place, and anyway there is only one place where it can write it,
namely bs->backing_file.
So, if it cannot happen, the patched code is okay.
It is also possible that the recursive call can happen, but only once. In
that case there would still be a bug in vmdk_open_desc_file setting
s->desc_offset = 0, but the patched code is okay.
Finally, in the case where multiple recursive calls can happen the code
would need to be rewritten anyway. It is likely that this would anyway
involve adding several parameters to vmdk_parent_open, and calling it from
vmdk_open_vmdk4.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While vmdk_open_desc_file (touched by the patch) correctly changed -1
to -EINVAL, vmdk_open did not. Fix it directly in vmdk_parent_open.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If during allocation of compressed clusters the cluster was already allocated
uncompressed, fail and properly release the l2_table (the latter avoids a
failed assertion).
While at it, make it return some real error numbers instead of -1.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
This similarly adds support for coroutine and asynchronous discard.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block drivers now only need to provide either of .bdrv_co_flush,
.bdrv_aio_flush() or for legacy drivers .bdrv_flush(). Remove
the redundant .bdrv_flush() implementations.
[Paolo Bonzini: change raw driver to bdrv_co_flush]
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This makes the following patch easier to review.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
