We support 16k pages, but do not advertize that in ID_AA64MMFR0.
The value 0 in the TGRAN*_2 fields indicates that stage2 lookups defer
to the same support as stage1 lookups. This setting is deprecated, so
indicate support for all stage2 page sizes directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220301215958.157011-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
64k pages. The only thing left at this point is to handle the
extra bits in the TTBR and in the table descriptors.
Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't
mask out the high bits when writing to those registers, so no changes
are required there.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently we don't allow guests under hvf to use the PAuth extension,
because we didn't have any special code to handle that, and therefore
in arm_cpu_pauth_finalize() we will sanitize the ID_AA64ISAR1 value
the guest sees to clear the PAuth related fields.
Add support for this in the same way that KVM does it, by defaulting
to "PAuth enabled" if the host CPU has it and allowing the user to
disable it via '-cpu pauth=no' on the command line.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-7-peter.maydell@linaro.org
Currently when using hvf we mishandle '-cpu max': we fall through to
the TCG version of its initfn, which then sets a lot of feature bits
that the real host CPU doesn't have. The hvf accelerator code then
exposes these bogus ID register values to the guest because it
doesn't check that the host really has the features.
Make '-cpu host' be like '-cpu max' for hvf, as we do with kvm.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-6-peter.maydell@linaro.org
Now that the if() branch of the condition in aarch64_max_initfn()
returns early, we don't need to keep the rest of the code in
the function inside an else block. Remove the else, unindenting
that code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-5-peter.maydell@linaro.org
Currently for KVM the intention is that '-cpu max' and '-cpu host'
are the same thing, but because we did this with two separate
pieces of code they have got a little bit out of sync. Specifically,
'max' has a 'sve-max-vq' property, and 'host' does not.
Bring the two together by having the initfn for 'max' actually
call the initfn for 'host'. This will result in 'max' no longer
exposing the 'sve-max-vq' property when using KVM.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-4-peter.maydell@linaro.org
Use the aarch64_cpu_register() machinery to register the 'host' CPU
type. This doesn't gain us anything functionally, but it does mean
that the code for initializing it looks more like that for the other
CPU types, in that its initfn then doesn't need to call
arm_cpu_post_init() (because aarch64_cpu_instance_init() does that
for it).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-3-peter.maydell@linaro.org
Now that KVM has dropped AArch32 host support, the 'host' CPU type is
always AArch64, and we can move it to cpu64.c. This move will allow
us to share code between it and '-cpu max', which should behave
the same as '-cpu host' when using KVM or HVF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220204165506.2846058-2-peter.maydell@linaro.org
Add basic support for Pointer Authentication when running a KVM
guest and that the host supports it, loosely based on the SVE
support.
Although the feature is enabled by default when the host advertises
it, it is possible to disable it by setting the 'pauth=off' CPU
property. The 'pauth' comment is removed from cpu-features.rst,
as it is now common to both TCG and KVM.
Tested on an Apple M1 running 5.16-rc6.
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220107150154.2490308-1-maz@kernel.org
[PMM: fixed indentation]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a definition for the Fujitsu A64FX processor.
The A64FX processor does not implement the AArch32 Execution state,
so there are no associated AArch32 Identification registers.
For SVE, the A64FX processor supports only 128,256 and 512bit vector
lengths.
The Identification register values are defined based on the FX700,
and have been tested and confirmed.
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Future CPU types may specify which vector lengths are supported.
We can apply nearly the same logic to validate those lengths
as we do for KVM's supported vector lengths. We merge the code
where we can, but unfortunately can't completely merge it because
KVM requires all vector lengths, power-of-two or not, smaller than
the maximum enabled length to also be enabled. The architecture
only requires all the power-of-two lengths, though, so TCG will
only enforce that.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-5-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that we have an ARMCPU member sve_vq_supported we no longer
need the local kvm_supported bitmap for KVM's supported vector
lengths.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-4-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow CPUs that support SVE to specify which SVE vector lengths they
support by setting them in this bitmap. Currently only the 'max' and
'host' CPU types supports SVE and 'host' requires KVM which obtains
its supported bitmap from the host. So, we only need to initialize the
bitmap for 'max' with TCG. And, since 'max' should support all SVE
vector lengths we simply fill the bitmap. Future CPU types may have
less trivial maps though.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210823160647.34028-2-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mirror the behavour of /proc/sys/abi/sve_default_vector_length
under the real linux kernel. We have no way of passing along
a real default across exec like the kernel can, but this is a
decent way of adjusting the startup vector length of a process.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-4-richard.henderson@linaro.org
[PMM: tweaked docs formatting, document -1 special-case,
added fixup patch from RTH mentioning QEMU's maximum veclen.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MTE3 introduces an asymmetric tag checking mode, in which loads are
checked synchronously and stores are checked asynchronously. Add
support for it.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210616195614.11785-1-pcc@google.com
[PMM: Add line to emulation.rst]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disable BF16 again for !have_neon and !have_vfp during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525225817.400336-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Disable I8MM again for !have_neon during realize.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210525010358.152808-93-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indicate support for FEAT_TLBIOS and FEAT_TLBIRANGE by setting
ID_AA64ISAR0.TLB to 2 for the max AARCH64 CPU type.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210512182337.18563-4-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit f7fb73b8cd.
This change turned out to be a bit half-baked, and doesn't
work with KVM, which fails with the error:
"qemu-system-aarch64: Failed to retrieve host CPU features"
because KVM does not allow accessing of the PMCR_EL0 value in
the scratch "query CPU ID registers" VM unless we have first
set the KVM_ARM_VCPU_PMU_V3 feature on the VM.
Revert the change for 6.0.
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Message-id: 20210331154822.23332-1-peter.maydell@linaro.org
Currently we give all the v7-and-up CPUs a PMU with 4 counters. This
means that we don't provide the 6 counters that are required by the
Arm BSA (Base System Architecture) specification if the CPU supports
the Virtualization extensions.
Instead of having a single PMCR_NUM_COUNTERS, make each CPU type
specify the PMCR reset value (obtained from the appropriate TRM), and
use the 'N' field of that value to define the number of counters
provided.
This means that we now supply 6 counters for Cortex-A53, A57, A72,
A15 and A9 as well as '-cpu max'; Cortex-A7 and A8 stay at 4; and
Cortex-R5 goes down to 3.
Note that because we now use the PMCR reset value of the specific
implementation, we no longer set the LC bit out of reset. This has
an UNKNOWN value out of reset for all cores with any AArch32 support,
so guest software should be setting it anyway if it wants it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20210311165947.27470-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Set ID_AA64PFR1_EL1.SSBS to 2 and ID_PFR2.SSBS to 1.
Signed-off-by: Rebecca Cran <rebecca@nuviainc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210216224543.16142-3-rebecca@nuviainc.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The interface for object_property_add_bool is simpler,
making the code easier to understand.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Class properties make QOM introspection simpler and easier, as
they don't require an object to be instantiated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201111183823.283752-8-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
QEMU supports a 48-bit physical address range, but we don't currently
expose it in the '-cpu max' ID registers (you get the same range as
Cortex-A57, which is 44 bits).
Set the ID_AA64MMFR0.PARange field to indicate 48 bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201001160116.18095-1-peter.maydell@linaro.org
Move the id_pfr0 and id_pfr1 fields into the ARMISARegisters
sub-struct. We're going to want id_pfr1 for an isar_features
check, and moving both at the same time avoids an odd
inconsistency.
Changes other than the ones to cpu.h and kvm64.c made
automatically with:
perl -p -i -e 's/cpu->id_pfr/cpu->isar.id_pfr/' target/arm/*.c hw/intc/armv7m_nvic.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200910173855.4068-3-peter.maydell@linaro.org
Set the MVFR1 ID register FPHP and SIMDHP fields to indicate
that our "-cpu max" has v8.2-FP16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200828183354.27913-46-peter.maydell@linaro.org
Control this cpu feature via a machine property, much as we do
with secure=on, since both require specialized support in the
machine setup to be functional.
Default MTE to off, since this feature implies extra overhead.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200713213341.590275-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When all we do with an Error we receive into a local variable is
propagating to somewhere else, we can just as well receive it there
right away. Convert
if (!foo(..., &err)) {
...
error_propagate(errp, err);
...
return ...
}
to
if (!foo(..., errp)) {
...
...
return ...
}
where nothing else needs @err. Coccinelle script:
@rule1 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
binary operator op;
constant c1, c2;
symbol false;
@@
if (
(
- fun(args, &err, args2)
+ fun(args, errp, args2)
|
- !fun(args, &err, args2)
+ !fun(args, errp, args2)
|
- fun(args, &err, args2) op c1
+ fun(args, errp, args2) op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
)
}
@rule2 forall@
identifier fun, err, errp, lbl;
expression list args, args2;
expression var;
binary operator op;
constant c1, c2;
symbol false;
@@
- var = fun(args, &err, args2);
+ var = fun(args, errp, args2);
... when != err
if (
(
var
|
!var
|
var op c1
)
)
{
... when != err
when != lbl:
when strict
- error_propagate(errp, err);
... when != err
(
return;
|
return c2;
|
return false;
|
return var;
)
}
@depends on rule1 || rule2@
identifier err;
@@
- Error *err = NULL;
... when != err
Not exactly elegant, I'm afraid.
The "when != lbl:" is necessary to avoid transforming
if (fun(args, &err)) {
goto out
}
...
out:
error_propagate(errp, err);
even though other paths to label out still need the error_propagate().
For an actual example, see sclp_realize().
Without the "when strict", Coccinelle transforms vfio_msix_setup(),
incorrectly. I don't know what exactly "when strict" does, only that
it helps here.
The match of return is narrower than what I want, but I can't figure
out how to express "return where the operand doesn't use @err". For
an example where it's too narrow, see vfio_intx_enable().
Silently fails to convert hw/arm/armsse.c, because Coccinelle gets
confused by ARMSSE being used both as typedef and function-like macro
there. Converted manually.
Line breaks tidied up manually. One nested declaration of @local_err
deleted manually. Preexisting unwanted blank line dropped in
hw/riscv/sifive_e.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-35-armbru@redhat.com>
The previous commit enables conversion of
visit_foo(..., &err);
if (err) {
...
}
to
if (!visit_foo(..., errp)) {
...
}
for visitor functions that now return true / false on success / error.
Coccinelle script:
@@
identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
expression list args;
typedef Error;
Error *err;
@@
- fun(args, &err);
- if (err)
+ if (!fun(args, &err))
{
...
}
A few line breaks tidied up manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
We now implement all of the components of MTE, without actually
supporting any tagged memory. All MTE instructions will work,
trivially, so we can enable support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit d70c996df2, when enabling the PMU we get:
$ qemu-system-aarch64 -cpu host,pmu=on -M virt,accel=kvm,gic-version=3
Segmentation fault (core dumped)
Thread 1 "qemu-system-aar" received signal SIGSEGV, Segmentation fault.
0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588
2588 ret = ioctl(s->fd, type, arg);
(gdb) bt
#0 0x0000aaaaaae356d0 in kvm_ioctl (s=0x0, type=44547) at accel/kvm/kvm-all.c:2588
#1 0x0000aaaaaae31568 in kvm_check_extension (s=0x0, extension=126) at accel/kvm/kvm-all.c:916
#2 0x0000aaaaaafce254 in kvm_arm_pmu_supported (cpu=0xaaaaac214ab0) at target/arm/kvm.c:213
#3 0x0000aaaaaafc0f94 in arm_set_pmu (obj=0xaaaaac214ab0, value=true, errp=0xffffffffe438) at target/arm/cpu.c:1111
#4 0x0000aaaaab5533ac in property_set_bool (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", opaque=0xaaaaac222730, errp=0xffffffffe438) at qom/object.c:2170
#5 0x0000aaaaab5512f0 in object_property_set (obj=0xaaaaac214ab0, v=0xaaaaac223a80, name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1328
#6 0x0000aaaaab551e10 in object_property_parse (obj=0xaaaaac214ab0, string=0xaaaaac11b4c0 "on", name=0xaaaaac11a970 "pmu", errp=0xffffffffe438) at qom/object.c:1561
#7 0x0000aaaaab54ee8c in object_apply_global_props (obj=0xaaaaac214ab0, props=0xaaaaac018e20, errp=0xaaaaabd6fd88 <error_fatal>) at qom/object.c:407
#8 0x0000aaaaab1dd5a4 in qdev_prop_set_globals (dev=0xaaaaac214ab0) at hw/core/qdev-properties.c:1218
#9 0x0000aaaaab1d9fac in device_post_init (obj=0xaaaaac214ab0) at hw/core/qdev.c:1050
...
#15 0x0000aaaaab54f310 in object_initialize_with_type (obj=0xaaaaac214ab0, size=52208, type=0xaaaaabe237f0) at qom/object.c:512
#16 0x0000aaaaab54fa24 in object_new_with_type (type=0xaaaaabe237f0) at qom/object.c:687
#17 0x0000aaaaab54fa80 in object_new (typename=0xaaaaabe23970 "host-arm-cpu") at qom/object.c:702
#18 0x0000aaaaaaf04a74 in machvirt_init (machine=0xaaaaac0a8550) at hw/arm/virt.c:1770
#19 0x0000aaaaab1e8720 in machine_run_board_init (machine=0xaaaaac0a8550) at hw/core/machine.c:1138
#20 0x0000aaaaaaf95394 in qemu_init (argc=5, argv=0xffffffffea58, envp=0xffffffffea88) at softmmu/vl.c:4348
#21 0x0000aaaaaada3f74 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at softmmu/main.c:48
This is because in frame #2, cpu->kvm_state is still NULL
(the vCPU is not yet realized).
KVM has a hard requirement of all cores supporting the same
feature set. We only need to check if the accelerator supports
a feature, not each vCPU individually.
Fix by removing the 'CPUState *cpu' argument from the
kvm_arm_<FEATURE>_supported() functions.
Fixes: d70c996df2 ('Use CPUState::kvm_state in kvm_arm_pmu_supported')
Reported-by: Haibo Xu <haibo.xu@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Virtual time adjustment was implemented for virt-5.0 machine type,
but the cpu property was enabled only for host-passthrough and max
cpu model. Let's add it for any KVM arm cpu which has the generic
timer feature enabled.
Signed-off-by: Ying Fang <fangying1@huawei.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20200608121243.2076-1-fangying1@huawei.com
[PMM: minor commit message tweak, removed inaccurate
suggested-by tag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
Use ARRAY_SIZE() to iterate over ARMCPUInfo[].
Since on the aarch64-linux-user build, arm_cpus[] is empty, add
the cpu_count variable and only iterate when it is non-zero.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the common set_feature() and unset_feature() functions
from cpu.c and cpu64.c to cpu.h.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-3-philmd@redhat.com
Message-ID: <20190921150420.30743-2-thuth@redhat.com>
[PMD: Split Thomas's patch in two: set_feature, cpu_register]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In aarch64_max_initfn() we update both 32-bit and 64-bit ID
registers. The intended pattern is that for 64-bit ID registers we
use FIELD_DP64 and the uint64_t 't' register, while 32-bit ID
registers use FIELD_DP32 and the uint32_t 'u' register. For
ID_AA64DFR0 we accidentally used 'u', meaning that the top 32 bits of
this 64-bit ID register would end up always zero. Luckily at the
moment that's what they should be anyway, so this bug has no visible
effects.
Use the right-sized variable.
Fixes: 3bec78447a
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200423110915.10527-1-peter.maydell@linaro.org
The ARMv8.2-TTS2UXN feature extends the XN field in stage 2
translation table descriptors from just bit [54] to bits [54:53],
allowing stage 2 to control execution permissions separately for EL0
and EL1. Implement the new semantics of the XN field and enable
the feature for our 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200330210400.11724-5-peter.maydell@linaro.org
Make cpu_register() (renamed to arm_cpu_register()) available
from internals.h so we can register CPUs also from other files
in the future.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200423073358.27155-3-philmd@redhat.com
Message-ID: <20190921150420.30743-2-thuth@redhat.com>
[PMD: Only take cpu_register() from Thomas's patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 41a4bf1fea the added code to set the CNP
field in ID_MMFR4 for the AArch64 'max' CPU had a typo
where it used the wrong variable name, resulting in ID_MMFR4
fields AC2, XNX and LSM being wrong. Fix the typo.
Fixes: 41a4bf1fea
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20200422124501.28015-1-peter.maydell@linaro.org
The ARMv8.2-TTCNP extension allows an implementation to optimize by
sharing TLB entries between multiple cores, provided that software
declares that it's ready to deal with this by setting a CnP bit in
the TTBRn_ELx. It is mandatory from ARMv8.2 onward.
For QEMU's TLB implementation, sharing TLB entries between different
cores would not really benefit us and would be a lot of work to
implement. So we implement this extension in the "trivial" manner:
we allow the guest to set and read back the CnP bit, but don't change
our behaviour (this is an architecturally valid implementation
choice).
The only code path which looks at the TTBRn_ELx values for the
long-descriptor format where the CnP bit is defined is already doing
enough masking to not get confused when the CnP bit at the bottom of
the register is set, so we can simply add a comment noting why we're
relying on that mask.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200225193822.18874-1-peter.maydell@linaro.org
The v8.4-RCPC extension implements some new instructions:
* LDAPUR, LDAPURB, LDAPURH, LDAPRSB, LDAPRSH, LDAPRSW
* STLUR, STLURB, STLURH
These are all in a new subgroup of encodings that sits below the
top-level "Loads and Stores" group in the Arm ARM.
The STLUR* instructions have standard store-release semantics; the
LDAPUR* have Load-AcquirePC semantics, but (as with LDAPR*) we choose
to implement them as the slightly stronger Load-Acquire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-4-peter.maydell@linaro.org
The v8.3-RCPC extension implements three new load instructions
which provide slightly weaker consistency guarantees than the
existing load-acquire operations. For QEMU we choose to simply
implement them with a full LDAQ barrier.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200224172846.13053-3-peter.maydell@linaro.org
