The only caller of nbd_do_establish_connection() that uses errp is
nbd_open(). The only way to cancel this call is through open_timer
timeout. And for this case, user will be more interested in description
of last failed connect rather than in
"Connection attempt cancelled by other operation".
So, let's change behavior on cancel to return previous failure error if
available.
Do the same for non-blocking failure case. In this case we still don't
have a caller that is interested in errp. But let's be consistent.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
It is useful when start of vm and start of nbd server are not
simple to sync.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a new chardev backend which allows D-Bus client to handle the
chardev stream & events.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The following patches are going to use CharSocket as a base class for
sockets that are created with a given fd (without a given address).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Expose the clipboard API over D-Bus. See the interface documentation for
further details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new -audio backend that accepts D-Bus clients/listeners to handle
playback & recording, to be exported via the -display dbus.
Example usage:
-audiodev dbus,in.mixing-engine=off,out.mixing-engine=off,id=dbus
-display dbus,audiodev=dbus
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Cover basic display interface usage. More cases to be added to cover
disconnections, multiple connections, corner cases. At this point, they
would be better written in Rust or Python though.
The proxy also covers reading the properties, since they are
automatically loaded at creation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add an option to use direct connections instead of via the bus. Clients
are accepted with QMP add_client.
This allows to provide the D-Bus display without a bus. It also
simplifies the testing setup (some CI have issues to setup a D-Bus bus
in a container).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The "dbus" display backend exports the QEMU consoles and other
UI-related interfaces over D-Bus.
By default, the connection is established on the session bus, but you
can specify a different bus with the "addr" option.
The backend takes the "org.qemu" service name, while still allowing
further instances to queue on the same name (so you can lookup all the
available instances too). It accepts any number of clients at this
point, although this is expected to evolve with options to restrict
clients, or only accept p2p via fd passing.
The interface is intentionally very close to the internal QEMU API,
and can be introspected or interacted with busctl/dfeet etc:
$ ./qemu-system-x86_64 -name MyVM -display dbus
$ busctl --user introspect org.qemu /org/qemu/Display1/Console_0
org.qemu.Display1.Console interface - - -
.RegisterListener method h - -
.SetUIInfo method qqiiuu - -
.DeviceAddress property s "pci/0000/01.0" emits-change
.Head property u 0 emits-change
.Height property u 480 emits-change
.Label property s "VGA" emits-change
.Type property s "Graphic" emits-change
.Width property u 640 emits-change
[...]
See the interfaces XML source file and Sphinx docs for the generated API
documentations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Further meson configuration tests are to be added based on the glib
version. Also correct the version reporting in the config log.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Wire up the dbus-display documentation. The interface and feature is
implemented next.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Use the source XML document as single reference, importing its
documentation via the dbus-doc directive.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Although not used by the backend itself, use a common location for
documentation and sharing purposes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new dbus-doc directive to import D-Bus interfaces documentation
from the introspection XML. The comments annotations follow the
gtkdoc/kerneldoc style, and should be formatted with reST.
Note: I realize after the fact that I was implementing those modules
with sphinx 4, and that we have much lower requirements. Instead of
lowering the features and code (removing type annotations etc), let's
have a warning in the documentation when the D-Bus modules can't be
used, and point to the source XML file in that case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new DisplayScanout structure to save the current scanout details.
This allows to attach later UI backends and set the scanout.
Introduce displaychangelistener_display_console() helper function to
handle the dpy_gfx_switch/gl_scanout() & dpy_gfx_update() calls.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
This will allow to have one GL context but a variable number of
listeners.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
For now, only one listener can receive GL events. Let's dispatch to all
listeners. (preliminary check ensure there is a single listener now
during regitration, and in next patches, compatible listeners only)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
GraphicHw.gl_flushed was introduced to notify the
device (vhost-user-gpu) that the GL resources (the display scanout) are
no longer needed.
It was decoupled from QEMU own gl-blocking mechanism, but that
difference isn't helping. Instead, we can reuse QEMU gl-blocking and
notify virtio_gpu_gl_flushed() when unblocking (to unlock
vhost-user-gpu).
An extra block/unblock is added arount dpy_gl_update() so existing
backends that don't block will have the flush event handled. It will
also help when there are no backends associated.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Similar to the one that exists for Spice, so we can investigate if
something is locked.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Consoles can have an associated GL context, without listeners (they may
be added or removed later on).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The next patch will make use of this function to dissociate
DisplayChangeListener from GL context.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
A remote client, such as Spice, will already avoid flooding the stream
by delaying the resize requests.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
It's part of Linux headers for a while now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, virgl initialization error is silent. Make it verbose instead.
(this is likely going to bug later on, as the device isn't fully
initialized)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use a QemuClipboardNotify union type for extendable clipboard events.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Move safe_syscall() from linux-user to common-user.
Add FreeBSD support to safe_syscall_base().
Tidy top-level meson.build wrt {bsd,linux}-user.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmHA3YMdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV+/XggAqZ2kp/xhmhlVKR8X
YzxmeAkPPuJSCQZt8v0UFPye2/HQTpXCboi4Lo+IgjI+6tpY4LhcY48071iiI5Ug
uWXIW9Y4+GnHPEDbyU3I1Wxg/OtXOj9B0Fy0ULw8ct0vKBjVgPBkiaQqtn+jCzOZ
+7SGdIJMz5hsgW+krP60BHyyXypU/NIDPhCEBRwusZ6Vp5UvkVicNmZaQjh4suZt
5gCFNSq43gw/+KhzjDEZvRTG00LteaCHUDY5nAfbyvE0o8hTDuroO16hCWCb7gZ+
8MH5NMJMOcKupPLk7YCJ+o5NQlWhR86ygZSiTg+WZyHldfXMPBINiLN1b878kNfT
NjcGRA==
=i5x2
-----END PGP SIGNATURE-----
Merge tag 'pull-user-20211220' of https://gitlab.com/rth7680/qemu into staging
Move errno processing from safe_syscall() to safe_syscall_base().
Move safe_syscall() from linux-user to common-user.
Add FreeBSD support to safe_syscall_base().
Tidy top-level meson.build wrt {bsd,linux}-user.
# gpg: Signature made Mon 20 Dec 2021 11:46:11 AM PST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-user-20211220' of https://gitlab.com/rth7680/qemu:
meson: Move bsd_user_ss to bsd-user/
meson: Move linux_user_ss to linux-user/
linux-user: Move thunk.c from top-level
common-user: Adjust system call return on FreeBSD
common-user: Move safe-syscall.* from linux-user
bsd-user: Create special-errno.h
linux-user: Create special-errno.h
linux-user: Rename TARGET_QEMU_ESIGRETURN to QEMU_ESIGRETURN
bsd-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYS
linux-user: Rename TARGET_ERESTARTSYS to QEMU_ERESTARTSYS
linux-user: Remove HAVE_SAFE_SYSCALL and hostdep.h
linux-user/host/sparc64: Add safe-syscall.inc.S
linux-user/host/mips: Add safe-syscall.inc.S
linux-user: Move syscall error detection into safe_syscall_base
linux-user: Untabify all safe-syscall.inc.S
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Add support for ratified 1.0 Vector extension
- Drop support for draft 0.7.1 Vector extension
- Support Zfhmin and Zfh extensions
- Improve kernel loading for non-Linux platforms
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmHADOgACgkQIeENKd+X
cFRf+wf/VFpooyx6c4yE0l3MmqYNWXGNi37JVKTd6p2uLM6NWbzmGIBFU/8OL8H+
v4FM5LVKDaOrzj5lNxqvE5lnglVvZNDjbeJ3SXyMS0Q2EjvsWlMbXvVcindZhX+5
gwNwMfFBMDWfx0C3NLJGeeWoTO59FsVvgRU5yEgHdV0BWnQtD3qqH7uXvFVWuED/
QzpNSTuSgxHD1N6cbQwv9KjSiO5q6JbpDCHdDs8O9dTHaouNk/+aHp2kbSBx2upB
KpehFcca0zbdF2TSYegHh3t6mWVCiQnTZ16V/P5szQJ9RF8pLbKim2fxPMJAJsE2
Ef0/Dldy76NlaugHLov3NK+QJ1ZpqQ==
=PEmw
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20211220-1' of github.com:alistair23/qemu into staging
First RISC-V PR for QEMU 7.0
- Add support for ratified 1.0 Vector extension
- Drop support for draft 0.7.1 Vector extension
- Support Zfhmin and Zfh extensions
- Improve kernel loading for non-Linux platforms
# gpg: Signature made Sun 19 Dec 2021 08:56:08 PM PST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20211220-1' of github.com:alistair23/qemu: (88 commits)
hw/riscv: Use load address rather than entry point for fw_dynamic next_addr
target/riscv: Enable bitmanip Zb[abcs] instructions
riscv: Set 5.4 as minimum kernel version for riscv32
target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing instructions
target/riscv: rvv-1.0: update opivv_vadc_check() comment
target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm
target/riscv: rvv-1.0: add vector unit-stride mask load/store insns
target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()
target/riscv: rvv-1.0: add vsetivli instruction
target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11
target/riscv: rvv-1.0: floating-point reciprocal estimate instruction
target/riscv: rvv-1.0: floating-point reciprocal square-root estimate instruction
target/riscv: gdb: support vector registers for rv64 & rv32
target/riscv: rvv-1.0: trigger illegal instruction exception if frm is not valid
target/riscv: rvv-1.0: implement vstart CSR
target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
target/riscv: add "set round to odd" rounding mode helper function
target/riscv: rvv-1.0: widening floating-point/integer type-convert
target/riscv: rvv-1.0: floating-point/integer type-convert instructions
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have no need to reference bsd_user_ss outside of bsd-user.
Go ahead and merge it directly into specific_ss.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have no need to reference linux_user_ss outside of linux-user.
Go ahead and merge it directly into specific_ss.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
So far, linux-user is the only user of these functions.
Clean up the build machinery by restricting it to linux-user.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
FreeBSD system calls return positive errno. On the 4 hosts for
which we have support, error is indicated by the C bit set or clear.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move linux-user safe-syscall.S and safe-syscall-error.c to common-user
so that bsd-user can also use it. Also move safe-syscall.h to
include/user/. Since there is nothing here that is related to the guest,
as opposed to the host, build it once.
Reviewed-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The original BBL boot method had the kernel embedded as an opaque blob
that was blindly jumped to, which OpenSBI implemented as fw_payload.
OpenSBI then implemented fw_jump, which allows the payload to be loaded
elsewhere, but still blindly jumps to a fixed address at which the
kernel is to be loaded. Finally, OpenSBI introduced fw_dynamic, which
allows the previous stage to inform it where to jump to, rather than
having to blindly guess like fw_jump, or embed the payload as part of
the build like fw_payload. When used with an opaque binary (i.e. the
output of objcopy -O binary), it matches the behaviour of the previous
methods. However, when used with an ELF, QEMU currently passes on the
ELF's entry point address, which causes a discrepancy compared with all
the other boot methods if that entry point is not the first instruction
in the binary.
This difference specific to fw_dynamic with an ELF is not apparent when
booting Linux, since its entry point is the first instruction in the
binary. However, FreeBSD has a separate ELF entry point, following the
calling convention used by its bootloader, that differs from the first
instruction in the binary, used for the legacy SBI entry point, and so
the specific combination of QEMU's default fw_dynamic firmware with
booting FreeBSD as an ELF rather than a raw binary does not work.
Thus, align the behaviour when loading an ELF with the behaviour when
loading a raw binary; namely, use the base address of the loaded kernel
in place of the entry point.
The uImage code is left as-is in using the U-Boot header's entry point,
since the calling convention for that entry point is the same as the SBI
one and it mirrors what U-Boot will do.
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211214032456.70203-1-jrtc27@jrtc27.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The bitmanip extension has now been ratified [1] and upstream tooling
(gcc/binutils) support it too, so move them out of experimental and also
enable by default (for better test exposure/coverage)
[1] https://wiki.riscv.org/display/TECH/Recently+Ratified+Extensions
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211216051844.3921088-1-vineetg@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
5.4 is first stable API as far as rv32 is concerned see [1]
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=7a55dd3fb6d2c307a002a16776be84310b9c8989
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Cc: Bin Meng <bin.meng@windriver.com>
Message-Id: <20211216073111.2890607-1-raj.khem@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
