Notice that "cpu" argument is actually "cpu-index" in the json.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add some more section titles to organize the documentation we're going
to generate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-10-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The doc generator we're going to add expects a fairly rigid doc
comment structure. Reorder / rephrase some doc comments to please it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-8-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
TransactionAction is a flat union, document 'type' versions
exhaustively, and sort the members.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-6-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
'device_add' is still incomplete for now, but we can fix a few
arguments:
- 'bus' is a common argument, regardless of the device
- 'id' is an optional argument
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170113144135.5150-5-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Consistently put a colon after TODO. This will make the TODOs stand
out in the documentation we're going to generate.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Replace with '*', the common form for list items.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170113144135.5150-2-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The new typename attribute on query-cpu-definitions will be used
to help management software use device-list-properties to check
which properties can be set using -cpu or -global for the CPU
model.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1479320499-29818-1-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Considering 'id' is mandatory for user_creatable objects/backends
and user_creatable_add_type() always has it as an argument
regardless of where from it is called CLI/monitor or QMP,
Fix issue by adding 'id' property to hostmem backends and
set it in user_creatable_add_type() for every object that
implements 'id' property. Then later at query-memdev time
get 'id' from object directly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1484052795-158195-4-git-send-email-imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
With "ps2: use QEMU qcodes instead of scancodes", key handling was
changed to qcode base. But all scancodes are not converted to new one.
This adds some missing qcodes/scancodes what I found in using.
[set1 and set3 are from <hpoussin@reactos.org>]
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The documentation parser we are going to add expects a section name to
end with ':', otherwise the comment is treated as free-form text body.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The documentation parser we are going to add only handles a single
symbol per line.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-8-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are various mismatch:
- invalid symbols
- section and member symbols mismatch
- enum or union values vs 'type'
The documentation parser catches all these cases.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
According to docs/qapi-code-gen.txt, there needs to be '##' to start a
and end a symbol section, that's also what the documentation parser
expects.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20161117155504.21843-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
VM can not get into colo state unless users enable 'x-colo'
capability for migration, Here it is necessary to clarify
this.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <1478072652-9884-1-git-send-email-zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
For automated testing purposes it can be helpful to exit qemu
(poweroff) when the guest panics. Make this the default unless
-no-shutdown is specified.
For internal-errors like errors from KVM_RUN the behaviour is
not changed, in other words QEMU does not exit to allow debugging
in the QEMU monitor.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1476775794-108012-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the AF_VSOCK address family so that qemu-ga will be able to use
virtio-vsock.
The AF_VSOCK address family uses <cid, port> address tuples. The cid is
the unique identifier comparable to an IP address. AF_VSOCK does not
use name resolution so it's easy to convert between struct sockaddr_vm
and strings.
This patch defines a VsockSocketAddress instead of trying to piggy-back
on InetSocketAddress. This is cleaner in the long run since it avoids
lots of IPv4 vs IPv6 vs vsock special casing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* treat trailing commas as garbage when parsing (Eric Blake)
* add configure check instead of checking AF_VSOCK directly
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When handling failover, COLO processes differently according to
the different stage of failover process, here we introduce a global
atomic variable to record the status of failover.
We add four failover status to indicate the different stage of failover process.
You should use the helpers to get and set the value.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We leave users to choose whatever heartbeat solution they want,
if the heartbeat is lost, or other errors they detect, they can use
experimental command 'x_colo_lost_heartbeat' to tell COLO to do failover,
COLO will do operations accordingly.
For example, if the command is sent to the Primary side,
the Primary side will exit COLO mode, does cleanup work,
and then, PVM will take over the service work. If sent to the Secondary side,
the Secondary side will run failover work, then takes over PVM's service work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Add checkpoint-delay parameter for migrate-set-parameters, so that
we can control the checkpoint frequency when COLO is in periodic mode.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Guest will enter this state when paused to save/restore VM state
under COLO checkpoint.
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We need communications protocol of user-defined to control
the checkpointing process.
The new checkpointing request is started by Primary VM,
and the interactive process like below:
Checkpoint synchronizing points:
Primary Secondary
initial work
'checkpoint-ready' <-------------------- @
'checkpoint-request' @ -------------------->
Suspend (Only in hybrid mode)
'checkpoint-reply' <-------------------- @
Suspend&Save state
'vmstate-send' @ -------------------->
Send state Receive state
'vmstate-received' <-------------------- @
Release packets Load state
'vmstate-load' <-------------------- @
Resume Resume (Only in hybrid mode)
Start Comparing (Only in hybrid mode)
NOTE:
1) '@' who sends the message
2) Every sync-point is synchronized by two sides with only
one handshake(single direction) for low-latency.
If more strict synchronization is required, a opposite direction
sync-point should be added.
3) Since sync-points are single direction, the remote side may
go forward a lot when this side just receives the sync-point.
4) For now, we only support 'periodic' checkpoint, for which
the Secondary VM is not running, later we will support 'hybrid' mode.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Add a new migration state: MIGRATION_STATUS_COLO. Migration source side
enters this state after the first live migration successfully finished
if COLO is enabled by command 'migrate_set_capability x-colo on'.
We reuse migration thread, so the process of checkpointing will be handled
in migration thread.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
We add helper function colo_supported() to indicate whether
colo is supported or not, with which we use to control whether or not
showing 'x-colo' string to users, they can use qmp command
'query-migrate-capabilities' or hmp command 'info migrate_capabilities'
to learn if colo is supported.
The default value for COLO (COarse-Grain LOck Stepping) is disabled.
Cc: Juan Quintela <quintela@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit@amitshah.net>
Commit de63ab6 accidentally undid part of commit a43edcf,
because the two patches were written in parallel, and the
blank line was not noticed as a casualty of merge conflicts.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1476739794-19536-1-git-send-email-eblake@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add a new optional field to query-cpu-definitions schema:
"unavailable-features". It will contain a list of QOM properties
that prevent the CPU model from running in the current host.
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Michael Mueller <mimu@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Jiri Denemark <jdenemar@redhat.com>
Cc: libvir-list@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Mark the old commands 'migrate_set_speed' and 'migrate_set_downtime' as
deprecated.
Move max-bandwidth and downtime-limit into migrate-set-parameters for
setting maximum migration speed and expected downtime limit parameters
respectively.
Change downtime units to milliseconds (only for new-command) and set
its upper bound limit to 2000 seconds.
Update the query part in both hmp and qmp qemu control interfaces.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now that QAPI makes it easy to pass a struct around, we don't
have to declare as many parameters or local variables.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
Also, we made a mistake in qemu 2.7 of returning an empty
string during 'query-migrate-parameters' when there is no
TLS, rather than omitting TLS details entirely. Technically,
this change risks breaking any 2.7 client that is hard-coded
to expect the parameter's existence; on the other hand, clients
that are portable to 2.6 already must be prepared for those
members to not be present.
And this gets rid of yet one more place where the QMP output
visitor is silently converting a NULL string into "" (which
is a hack I ultimately want to kill off).
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This makes it easier to parse the schema file for tool generation:
each paragraph is either a non-docstring comment, or a docstring
immediately followed by a Python dict describing an API item.
Signed-off-by: David Anderson <dave@natulte.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tap backend is already using qemu-bridge-helper to attach tap
interface to a bridge but (unlike the bridge backend) it always uses
the default bridge name - br0.
This adds a "br" property support to the tap backend.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Even though device_add is not fully qapi'fied, we may add it to the json
schema with 'gen': false, so registration and documentation can be
generated.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20160912091913.15831-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qapi'fy the 'qmp_capabilities' command, makes the command visible in
query-qmp-schema.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20160912091913.15831-3-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Fixup some typos and whitespace damage introduced by the CPU model
patches for s390.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's implement that interface by reusing our conversion code and
lookup code for CPU definitions.
In order to find a compatible CPU model, we first detect the maximum
possible CPU generation and then try to find a maximum model, satisfying
all base features (not exceeding the maximum generation).
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-31-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's implement that interface by reusing our convertion code implemented
for expansion.
We use CPU generations and CPU features to calculate the result. This
means, that a zEC12 cannot simply be converted into a z13 by stripping
of features. This is required, as other magic values (e.g. maximum
address sizes) belong to a CPU generation and cannot simply be
emulated by an older generation.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-30-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In order to expand CPU models, we create temporary cpus that handle the
feature/group parsing. Only CPU feature properties are expanded.
When converting the data structure back, we always fall back to the
static base CPU model, which is by definition migration-safe.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-29-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's provide a standardized interface to baseline two CPU models, to
create a third, compatible one. This is especially helpful when two
CPU models are not identical, but a CPU model is required that is
guaranteed to run under both configurations, where the original models run.
"query-cpu-model-baseline" takes two CPU models and returns a third,
compatible model. The result will always be a static CPU model.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
