This virtual method was always set to the x86-specific pc_madt_cpu_entry(),
even in piix4 which is also used in MIPS. The previous changes use
pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped.
Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub
in hw/acpi/acpi-x86-stub can be removed as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
build_cpus_aml() is architecture independent but needs to create architecture-
specific CPU AML. So far this was achieved by using a virtual method from
TYPE_ACPI_DEVICE_IF. However, build_cpus_aml() would resolve this interface from
global (!) state. This makes it quite incomprehensible where this interface
comes from (TYPE_PIIX4_PM?, TYPE_ICH9_LPC_DEVICE?, TYPE_ACPI_GED_X86?) an can
lead to crashes when the generic code is ported to new architectures.
So far, build_cpus_aml() is only called in architecture-specific code -- and
only in x86. We can therefore simply pass pc_madt_cpu_entry() as callback to
build_cpus_aml(). This is the same callback that would be used through
TYPE_ACPI_DEVICE_IF.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-3-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is x86-specific code, so there is no advantage in using
pc_madt_cpu_entry() behind an architecture-agnostic interface.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix:
In file included from ../tcg/tcg.c:735:
/home1/gaosong/bugfix/qemu/tcg/loongarch64/tcg-target.c.inc: In function ‘tcg_out_vec_op’:
/home1/gaosong/bugfix/qemu/tcg/loongarch64/tcg-target.c.inc:1855:9: error: a label can only be part of a statement and a declaration is not a statement
TCGCond cond = args[3];
^~~~~~~
Signed-off-by: gaosong <gaosong@loongson.cn>
Message-Id: <20230926075819.3602537-1-gaosong@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit 18a536f1f8 ("accel/tcg: Always require can_do_io") fixed
the GitLab issue #1884: we can now re-enable those tests.
This reverts commit f959c3d87c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231003063808.66564-1-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This build option has been deprecated since 8.0.
Remove all CONFIG_GPROF code that depends on that,
including one errant check using TARGET_GPROF.
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use abi_ullong not uint64_t so that the alignment of the field
and therefore the layout of the struct is correct.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The tcg/tcg.h header is a big bucket, containing stuff related to
the translators and the JIT backend. The places that initialize
tcg or create new threads do not need all of that, so split out
these three functions to a new header.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We can load tcg_ctx just as easily within the callee.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_in_serial_context() is not target specific,
move it declaration to "internal-common.h" (which
we include in the 4 source files modified).
Remove the unused "exec/exec-all.h" header from
cpu-exec-common.c. There is no more target specific
code in this file: make it target agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-12-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the unused "exec/exec-all.h" header. There is
no more target specific code in it: make it target
agnostic (rename using the '-common' suffix). Since
it is TCG specific, move it to accel/tcg, updating
MAINTAINERS.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-11-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move target-agnostic declarations from "internal-target.h"
to a new "internal-common.h" header.
monitor.c now don't include target specific headers and can
be compiled once in system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/internal.h contains target specific declarations.
Unit files including it become "target tainted": they can not
be compiled as target agnostic. Rename using the '-target'
suffix to make this explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This matches the target agnostic 'page-vary-common.c' counterpart.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-8-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have exec/cpu code split in 2 files for target agnostic
("common") and specific. Rename 'cpu.c' which is target
specific using the '-target' suffix. Update MAINTAINERS.
Remove the 's from 'cpus-common.c' to match the API cpu_foo()
functions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We use the '-common.c' suffix for target agnostic units.
This file is target specific, rename it using the '-target'
suffix.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-6-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel-blocker.c is not target specific, move it to system_ss[].
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In commit 00c9a5c2c3 ("accel/tcg: Restrict 'qapi-commands-machine.h'
to system emulation") we moved the definition to accel/tcg/ which is
where this function is called. No need to expose it outside.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-4-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While these functions are not TCG specific, they are not target
specific. Move them to "exec/cpu-common.h" so their callers don't
have to be tainted as target specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The EXCP_* definitions don't need to be target specific,
move them to "exec/cpu-common.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230914185718.76241-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A large chunk of ld/st functions are moved from cputlb.c and user-exec.c
to ldst_common.c.inc as their implementation is the same between both
modes.
Eventually, ldst_common.c.inc could be compiled into a separate
target-specific compilation unit, and be linked in with the targets.
Keeping CPUArchState usage out of cputlb.c (CPUArchState is primarily
used to access the mmu index in these functions).
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-12-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The prototype of do_[st|ld]*_mmu() is unified between system- and
user-mode allowing a large chunk of helper_[st|ld]*() and cpu_[st|ld]*()
functions to be expressed in same manner between both modes. These
functions will be moved to ldst_common.c.inc in a following commit.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-11-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The function is no longer used to access the TLB,
and has been replaced by cpu->neg.tlb.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-9-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Merge comment update patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes ldst_atomicity.c.inc almost target-independent, with the exception
of TARGET_PAGE_MASK, which will be addressed in a future patch.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-8-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The goal is to (in the future) allow for per-target compilation of
functions in atomic_template.h whilst atomic_mmu_lookup() and cputlb.c
are compiled once-per user- or system mode.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
do_[ld|st]*() and mmu_lookup*() are changed to use CPUState over
CPUArchState, moving the target-dependence to the target-facing facing
cpu_[ld|st] functions.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-6-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb; cpu_env instead of env_ptr.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
probe_access_internal() is changed to instead take the generic CPUState
over CPUArchState, in order to lessen the target-specific coupling of
cputlb.c. Note: probe_access*() also don't need the full CPUArchState,
but aren't touched in this patch as they are target-facing.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-5-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Changes tlb_*() functions to take CPUState instead of CPUArchState, as
they don't require the full CPUArchState. This makes it easier to
decouple target-(in)dependent code.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230912153428.17816-4-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[rth: Use cpu->neg.tlb instead of cpu_tlb()]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that there is no padding between CPUNegativeOffsetState
and CPUArchState, this value is constant across all targets.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace the single use within env_tlb() and remove.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This function is now empty, so remove it. In the case of
m68k and tricore, this empties the class instance initfn,
so remove those as well.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hi
In this series:
* make sure migration-tests get 0's (daniil)
Notice that this creates a checkpatch negative, everything on that
file is volatile, no need to add a comment.
* RDMA fix from li
* MAINTAINERS
Get peter and fabiano to become co-maintainers of migration
Get Entry fro migration-rdma for Li Zhijian
* Create field_exists() (peterx)
* Improve error messages (Tejus)
Please apply.
s
-----BEGIN PGP SIGNATURE-----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=il/A
-----END PGP SIGNATURE-----
Merge tag 'migration-20231004-pull-request' of https://gitlab.com/juan.quintela/qemu into staging
Migration Pull request (20231004)
Hi
In this series:
* make sure migration-tests get 0's (daniil)
Notice that this creates a checkpatch negative, everything on that
file is volatile, no need to add a comment.
* RDMA fix from li
* MAINTAINERS
Get peter and fabiano to become co-maintainers of migration
Get Entry fro migration-rdma for Li Zhijian
* Create field_exists() (peterx)
* Improve error messages (Tejus)
Please apply.
s
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmUdXTwACgkQ9IfvGFhy
# 1yPFPg//awd8HpoLs1Cq6zquBRivZOS88+tstwlBIODoU3lwPlriGU9Wquv8MqxG
# NGvcUKVsv1XXsRWYsqN3OPV6m+uRZpKrFfXEnIGNpHptf/e6KrrDGAttukalhx4n
# hJXCAActe9DlujSu+QI0L/j7R9S33zvLS46sjq7jaYLQLMzuEf5i+hiEPWfPP7AT
# 0SjrtpFaqIOGY4+VKteDirP7zJtu1+WEMVFgtAUeh3c0R8UAOsxVzBjfM3+KagIx
# NnYesFZoaOjVi1Xi1cRII7FmeKZ2OU7VBdYN9h3Y+dRIRjzF/YZOdt6Ypgb1c4gw
# ohpWJWT2tHU1z7nguSFpnqtu8xCeGhwAy+HUn/Az0TP6SCtpKRh23bZpwbfWIrHs
# eSZB6tO/eC/noQ5/d2cSs6pz7P77MkhTfxwD2+n9R4O36vSHEj3dGF0JbgCPr/Kw
# 0qfch9BQkFkAec3kiaZO/JOQ1rJuIMTbdER9gDzIODpUIc5QExs1dFwLoz5IRcpQ
# A1kOqVatMmm8jrvC3lEw76FjMX5pv11DKcS75ogWsSZHGk/jpXWABPEtiamzloqv
# c6owc5f09etkQCzT5ME8AZyZRjt7eeqIxZDZlGCjHbqZ+w/xuDsFJrEdg8YJvRLw
# AmsU5rRT2JV4lDNgZ1XG+xY9HF5LhAXYet5+UrCMBpFGk7JnHIw=
# =il/A
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Oct 2023 08:40:28 EDT
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [full]
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20231004-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: Unify and trace vmstate field_exists() checks
migration: file URI offset
migration: file URI
s390x/a-b-bios: zero the first byte of each page on start
i386/a-b-bootblock: zero the first byte of each page on start
i386/a-b-bootblock: factor test memory addresses out into constants
migration/rdma: zore out head.repeat to make the error more clear
migration: Add co-maintainers for migration
MAINTAINERS: Add entry for rdma migration
migration: Update error description outside migration.c
migration/vmstate: Introduce vmstate_save_state_with_err
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This pull request represents the mmap and exec changes from Karim Taha
for his GSoC project.
They represent all the mmap and exec related system calls and get bsd-user to
the point that a dynamic hello-world works (at least for armv7).
There are a couple of patch check errors, but they are the lessor evil: I made
purposely bad style choices to ensure all the commits compiled (and i undid the
style choices in subsequent commits).
I pushed an earlier version to gitlab, and all but the riscv64 pipelines were
green. Since bsd-user doesn't change anything related to ricsv64 (there's no
support in qemu-project repo, though we do have it in the bsd-user fork: coming
soon).
I think this is good to go.
https://gitlab.com/bsdimp/qemu.git
Warner
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=WpL4
-----END PGP SIGNATURE-----
Merge tag 'bsd-user-mmap-pull-request' of https://gitlab.com/bsdimp/qemu into staging
bsd-user mmap and exec branches from gsoc
This pull request represents the mmap and exec changes from Karim Taha
for his GSoC project.
They represent all the mmap and exec related system calls and get bsd-user to
the point that a dynamic hello-world works (at least for armv7).
There are a couple of patch check errors, but they are the lessor evil: I made
purposely bad style choices to ensure all the commits compiled (and i undid the
style choices in subsequent commits).
I pushed an earlier version to gitlab, and all but the riscv64 pipelines were
green. Since bsd-user doesn't change anything related to ricsv64 (there's no
support in qemu-project repo, though we do have it in the bsd-user fork: coming
soon).
I think this is good to go.
https://gitlab.com/bsdimp/qemu.git
Warner
# -----BEGIN PGP SIGNATURE-----
# Comment: GPGTools - https://gpgtools.org
#
# iQIzBAABCgAdFiEEIDX4lLAKo898zeG3bBzRKH2wEQAFAmUcpC4ACgkQbBzRKH2w
# EQDD9xAA3Rg0AnfnFrd+AoWRb/1/gOuO0v+dEGXj50qnGY8OmHeYtg3XecYPArBq
# EicZzL/OG7UZKMl5OfrmGP9tbr32yfeRUTe3AGGHfmnSb11q0yeSaEFZI7felLHj
# 9nlq4H/2EDRrY+7EnG1TWqtnuqDJAJf/7M0giiVxIk77XGX+USUNPOSG4NP/yc8E
# D5p2GN23pUsvnI0jBZkyP3gyeXVNCNG5+KobwqJM3r6OjEiTRmLEVBw98YzG12bh
# OY9ekMtVUKHi4Cvsf+2TtkDGRya0wX4uqm4UB1TtV1VUDoCWhYgEKBHp3ozCoVjB
# J+ygbx7/jNfY53cpgEpKUBFH7rnOq1yQQ+ad5Ap5hbp4j6WSvPwdp1N3RCnkZzd/
# L50VIaySd+P6enAgPO5Mbt3kMMVd/eDGhQDWdzNToIjyhXBb5hUNfumg9AgdEwTh
# rW/kKT39YLYWLO123hIJCy2CKU9nvoea9588ExkKb22v0ltrtDcAlWfCbZvZYxNN
# wRzh+MFBt7Cd/bqk7HaJ0J/YyPToqImoUjNuBnBSDPqZQP2H4U8v/FoICQ0mm5kR
# jZCmGLMEP1PiDlusjUjaW0iamHvXiSP8KEzaAbIxx5UUiTWTTkQm4CKY/xPxC9VQ
# 0ygJqJVrKHlNrAY9u6ggJAXtorVwmC55z4ZqIVQH6cbzUYFMuJU=
# =WpL4
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 03 Oct 2023 19:30:54 EDT
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* tag 'bsd-user-mmap-pull-request' of https://gitlab.com/bsdimp/qemu: (51 commits)
bsd-user: Add stubs for vadvise(), sbrk() and sstk()
bsd-user: Implement shmat(2) and shmdt(2)
bsd-user: Implement shmctl(2)
bsd-user: Implement shm_unlink(2) and shmget(2)
bsd-user: Implement shm_open(2)
bsd-user: Implement do_obreak function
bsd-user: Implement mincore(2)
bsd-user: Implment madvise(2) to match the linux-user implementation.
bsd-user: Implement mlock(2), munlock(2), mlockall(2), munlockall(2), minherit(2)
bsd-user: Implement msync(2)
bsd-user: Implement mprotect(2)
bsd-user: Implement mmap(2) and munmap(2)
bsd-user: Introduce bsd-mem.h to the source tree
bsd-user: Implement shmid_ds conversion between host and target.
bsd-user: Implement ipc_perm conversion between host and target.
bsd-user: Implement target_set_brk function in bsd-mem.c instead of os-syscall.c
bsd-user: Add bsd-mem.c to meson.build
bsd-user: Implement shm_rename(2) system call
bsd-user: Implement shm_open2(2) system call
bsd-user: Introduce freebsd/os-misc.h to the source tree
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
As noted in the comment, the PCI INTx lines are supposed to be routed
to *both* the PIC and the I/O APIC. It's just that we don't cope with
the concept of an IRQ being asserted to two *different* pins on the
two irqchips.
So we have this hack of routing to I/O APIC only if the PIRQ routing to
the PIC is disabled. Which seems to work well enough, even when I try
hard to break it with kexec. But should be explicitly documented and
understood.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <112a09643b8191c4eae7d92fa247a861ab90a9ee.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently we set _FORTIFY_SOURCE=2 as a compiler argument when the
meson 'optimization' setting is non-zero, the compiler is GCC and
the target is Linux.
While the default QEMU optimization level is 2, user could override
this by setting CFLAGS="-O0" or --extra-cflags="-O0" when running
configure and this won't be reflected in the meson 'optimization'
setting. As a result we try to enable _FORTIFY_SOURCE=2 and then the
user gets compile errors as it only works with optimization.
Rather than trying to improve detection in meson, it is simpler to
just check the __OPTIMIZE__ define from osdep.h.
The comment about being incompatible with clang appears to be
outdated, as compilation works fine without excluding clang.
In the coroutine code we must set _FORTIFY_SOURCE=0 to stop the
logic in osdep.h then enabling it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20231003091549.223020-1-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For both save/load we actually share the logic on deciding whether a field
should exist. Merge the checks into a helper and use it for both save and
load. When doing so, add documentations and reformat the code to make it
much easier to read.
The real benefit here (besides code cleanups) is we add a trace-point for
this; this is a known spot where we can easily break migration
compatibilities between binaries, and this trace point will be critical for
us to identify such issues.
For example, this will be handy when debugging things like:
https://gitlab.com/qemu-project/qemu/-/issues/932
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230906204722.514474-1-peterx@redhat.com>
Allow an offset option to be specified as part of the file URI, in
the form "file:filename,offset=offset", where offset accepts the common
size suffixes, or the 0x prefix, but not both. Migration data is written
to and read from the file starting at offset. If unspecified, it defaults
to 0.
This is needed by libvirt to store its own data at the head of the file.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-3-git-send-email-steven.sistare@oracle.com>
Extend the migration URI to support file:<filename>. This can be used for
any migration scenario that does not require a reverse path. It can be
used as an alternative to 'exec:cat > file' in minimized containers that
do not contain /bin/sh, and it is easier to use than the fd:<fdname> URI.
It can be used in HMP commands, and as a qemu command-line parameter.
For best performance, guest ram should be shared and x-ignore-shared
should be true, so guest pages are not written to the file, in which case
the guest may remain running. If ram is not so configured, then the user
is advised to stop the guest first. Otherwise, a busy guest may re-dirty
the same page, causing it to be appended to the file multiple times,
and the file may grow unboundedly. That issue is being addressed in the
"fixed-ram" patch series.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-2-git-send-email-steven.sistare@oracle.com>
Same as with the x86 verison of this test, we relied on the contents of
all pages in RAM to be the same across the entire test range, which is
very fragile. Zero the first byte of each page before running the
increment loop to fix this.
Fixes: 5571dc824b ("tests/migration: Enable the migration test on s390x, too")
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-4-d-tatianin@yandex-team.ru>
The migration qtest all the way up to this point used to work by sheer
luck relying on the contents of all pages from 1MiB to 100MiB to contain
the same one value in the first byte initially.
This easily breaks if we reduce the amount of RAM for the test instances
from 150MiB to e.g 110MiB since that makes SeaBIOS dirty some of the
pages starting at about 0x5dd2000 (~93 MiB) as it reuses those for the
HighMemory allocator since commit dc88f9b72df ("malloc: use large
ZoneHigh when there is enough memory").
This would result in the following errors:
12/60 qemu:qtest+qtest-x86_64 / qtest-x86_64/migration-test ERROR 2.74s killed by signal 6 SIGABRT
stderr:
Memory content inconsistency at 5dd2000 first_byte = cc last_byte = cb current = 9e hit_edge = 1
Memory content inconsistency at 5dd3000 first_byte = cc last_byte = cb current = 89 hit_edge = 1
Memory content inconsistency at 5dd4000 first_byte = cc last_byte = cb current = 23 hit_edge = 1
Memory content inconsistency at 5dd5000 first_byte = cc last_byte = cb current = 31 hit_edge = 1
Memory content inconsistency at 5dd6000 first_byte = cc last_byte = cb current = 70 hit_edge = 1
Memory content inconsistency at 5dd7000 first_byte = cc last_byte = cb current = ff hit_edge = 1
Memory content inconsistency at 5dd8000 first_byte = cc last_byte = cb current = 54 hit_edge = 1
Memory content inconsistency at 5dd9000 first_byte = cc last_byte = cb current = 64 hit_edge = 1
Memory content inconsistency at 5dda000 first_byte = cc last_byte = cb current = 1d hit_edge = 1
Memory content inconsistency at 5ddb000 first_byte = cc last_byte = cb current = 1a hit_edge = 1
and in another 26 pages**
ERROR:../tests/qtest/migration-test.c:300:check_guests_ram: assertion failed: (bad == 0)
Fix this by always zeroing the first byte of each page in the range so
that we get consistent results no matter the initial contents.
Fixes: ea0c6d6239 ("test: Postcopy")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-3-d-tatianin@yandex-team.ru>
So that we have less magic numbers to deal with. This also allows us to
reuse these in the following commits.
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230919102346.2117963-2-d-tatianin@yandex-team.ru>
Previously, we got a confusion error that complains
the RDMAControlHeader.repeat:
qemu-system-x86_64: rdma: Too many requests in this message (3638950032).Bailing.
Actually, it's caused by an unexpected RDMAControlHeader.type.
After this patch, error will become:
qemu-system-x86_64: Unknown control message QEMU FILE
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230926100103.201564-2-lizhijian@fujitsu.com>
Per the qemu upstream call a few hours ago, proposing Fabiano and myself as
the co-maintainer for migration subsystem to help Juan.
Cc: Fabiano Rosas <farosas@suse.de>
Cc: Juan Quintela <quintela@redhat.com>
Acked-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003143847.9245-1-peterx@redhat.com>
It's not obvious to many that RDMA migration is in Odd Fixes stage for a
long time. Add an explicit sub entry for it (besides migration, which
already covers the rdma files) to be clear on that, meanwhile add Zhijian
as Reviewer, so Zhijian can see the patches and review when he still has
the bandwidth.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Zhijian Li (Fujitsu) <lizhijian@fujitsu.com>
Cc: Fabiano Rosas <farosas@suse.de>
Acked-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230925133441.265455-1-peterx@redhat.com>
A few code paths exist in the source code,where a migration is
marked as failed via MIGRATION_STATUS_FAILED, but the failure happens
outside of migration.c
In such cases, an error_report() call is made, however the current
MigrationState is never updated with the error description, and hence
clients like libvirt never know the actual reason for the failure.
This patch covers such cases outside of migration.c and updates the
error description at the appropriate places.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-3-tejus.gk@nutanix.com>
Currently, a few code paths exist in the function vmstate_save_state_v,
which ultimately leads to a migration failure. However, an update in the
current MigrationState for the error description is never done.
vmstate.c somehow doesn't seem to allow the use of migrate_set_error due
to some dependencies for unit tests. Hence, this patch introduces a new
function vmstate_save_state_with_err, which will eventually propagate
the error message to savevm.c where a migrate_set_error call can be
eventually done.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-2-tejus.gk@nutanix.com>
Move the definition of VhostUserProtocolFeature to
include/hw/virtio/vhost-user.h.
Remove previous definitions in hw/scsi/vhost-user-scsi.c,
hw/virtio/vhost-user.c, and hw/virtio/virtio-qmp.c.
Previously there were 3 separate definitions of this over 3 different
files. Now only 1 definition of this will be present for these 3 files.
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Reviewed-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230926224107.2951144-4-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
