The command registry encapsulates a single command list. Give the
functions using it a parameter instead. Define suitable command lists
in monitor, guest agent and test-qmp-commands.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488544368-30622-6-git-send-email-armbru@redhat.com>
[Debugging turds buried]
Reviewed-by: Eric Blake <eblake@redhat.com>
The way we get QMP commands registered is high tech:
* qapi-commands.py generates qmp_init_marshal() that does the actual work
* it also generates the magic to register it as a MODULE_INIT_QAPI
function, so it runs when someone calls
module_call_init(MODULE_INIT_QAPI)
* main() calls module_call_init()
QEMU needs to register a few non-qapified commands. Same high tech
works: monitor.c has its own qmp_init_marshal() along with the magic
to make it run in module_call_init(MODULE_INIT_QAPI).
QEMU also needs to unregister commands that are not wanted in this
build's configuration (commit 5032a16). Simple enough:
qmp_unregister_commands_hack(). The difficulty is to make it run
after the generated qmp_init_marshal(). We can't simply run it in
monitor.c's qmp_init_marshal(), because the order in which the
registered functions run is indeterminate. So qmp_init_marshal()
registers qmp_unregister_commands_hack() separately. Since
registering *appends* to the list of registered functions, this will
make it run after all the functions that have been registered already.
I suspect it takes a long and expensive computer science education to
not find this silly.
Dumb it down as follows:
* Drop MODULE_INIT_QAPI entirely
* Give the generated qmp_init_marshal() external linkage.
* Call it instead of module_call_init(MODULE_INIT_QAPI)
* Except in QEMU proper, call new monitor_init_qmp_commands() that in
turn calls the generated qmp_init_marshal(), registers the
additional commands and unregisters the unwanted ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-5-git-send-email-armbru@redhat.com>
process_command returns a negative value in case of error. Make this
clear in the "if" statement and fix the strerror argument to flip it
to positive.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Itemize the possible return values of guest-set-vcpus.
Drop the blank lines for consistency with itemized
lists elsewhere.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170113144135.5150-7-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The documentation parser we are going to add expects a section name to
end with ':', otherwise the comment is treated as free-form text body.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-9-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There are various mismatch:
- invalid symbols
- section and member symbols mismatch
- enum or union values vs 'type'
The documentation parser catches all these cases.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20161117155504.21843-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
According to docs/qapi-code-gen.txt, there needs to be '##' to start a
and end a symbol section, that's also what the documentation parser
expects.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20161117155504.21843-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
guest-get-memory-block-info documentation should have only one
"Returns:".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20161117155504.21843-3-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add AF_VSOCK (virtio-vsock) support as an alternative to virtio-serial.
$ qemu-system-x86_64 -device vhost-vsock-pci,guest-cid=3 ...
(guest)# qemu-ga -m vsock-listen -p 3:1234
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Throughout the code there are c->listen_channel checks which manage the
listen socket file descriptor (waiting for accept(2), closing the file
descriptor, etc). These checks are currently preceded by explicit
c->method == GA_CHANNEL_UNIX_LISTEN checks.
Explicit GA_CHANNEL_UNIX_LISTEN checks are not necessary since serial
channel types do not create the listen channel (c->listen_channel).
As more listen channel types are added, explicitly checking all of them
becomes messy. Rely on c->listen_channel to determine whether or not a
listen socket file descriptor is used.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
ga_channel_listen_accept() is currently hard-coded to support only
AF_UNIX because the struct sockaddr_un type is used. This function
should work with any address family.
Drop the sockaddr since the client address is unused and is an optional
argument to accept(2).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Unfortunately, there is no public Windows API to start trimming the
filesystem. The only viable way here is to call 'defrag.exe /L' for
each volume.
This is working since Win8 and Win2k12.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Stefan Weil <sw@weilnetz.de>
CC: Marc-André Lureau <marcandre.lureau@gmail.com>
* check g_utf16_to_utf8() return value for GError handling instead
of GError directly (Marc-André)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The quiet-command make rule currently takes two arguments:
the command and arguments to run, and a string to print if
the V flag is not set (ie we are not being verbose).
By convention, the string printed is of the form
" NAME some args". Unfortunately to get nicely lined up
output all the strings have to agree about what column the
arguments should start in, which means that if we add a
new quiet-command usage which wants a slightly longer CMD
name then we either put up with misalignment or change
every quiet-command string.
Split the quiet-mode string into two, the "NAME" and
the "same args" part, and use printf(1) to format the
string automatically. This means we only need to change
one place if we want to support a longer maximum name.
In particular, we can now print 7-character names lined
up properly (they are needed for the OSX "SETTOOL" invocation).
Change all the uses of quiet-command to the new syntax.
(Any which are missed or inadvertently reintroduced
via later merges will result in slightly misformatted
quiet output rather than disaster.)
A few places in the pc-bios/ makefiles are updated to use
"BUILD", "SIGN" and "STRIP" rather than "Building",
"Signing" and "Stripping" for consistency and to keep them
below 7 characters. Module .mo links now print "LD" rather
than the nonstandard "LD -r".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1475598441-27908-1-git-send-email-peter.maydell@linaro.org
The guest client's use of the glib's g_atomic primitives causes newer
GCC's to barf when built on Travis. As QEMU has its own primitives with
well understood semantics we might as well use them.
The use of atomics was a little inconsistent so I've also ensure the
values are correctly set with atomic primitives at the same time.
I also made the usage of bool consistent while I was at it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160930213106.20186-12-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Free the config blacklist list, not just the elements. Do it so in the
more appropriate function config_free().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely. Offenders found with
scripts/clean-header-guards.pl -vn.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tracked down with an ugly, brittle and probably buggy Perl script.
Also move includes converted to <...> up so they get included before
ours where that's obviously okay.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
error_propagate() already ignores local_err==NULL, so there's no
need to check it before calling.
Coccinelle patch used to perform the changes added to
scripts/coccinelle/error_propagate_null.cocci.
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove glib.h includes, as it is provided by osdep.h.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
mingw-glib uses helper process to assist gspawn() api. There are two
versions of helpers, one with main() and another with WinMain() startup
routines.
Whenever gspawn() detects consoleless environment (and qemu-ga is running
in such environment as Win32 service), it chooses helper with main()
instead of WinMain. It is done by name, e.g.
gspawn-win32-helper-console.exe vs gspawn-win32-helper.exe
Running console-aware application like any win32 console apps from main()
crt initalized process results in redirection of stdout to console created
in crt startup instead of parent-provided handle connected to subprocess
pipe. Thus, stdout/stderr redirection do not work correctly.
The patch makes WinMain()'s version of helper be used as the only helper
shipped with qemu-ga package. Using only win32 helper ensures console
is created before any redirection and fixes stdout/stderr redirection
issue.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Yuriy Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* squashed in g_io_channel_shutdown() to match cleanup paths for
input/output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJW9ErPAAoJEL/70l94x66DJfEH/A/QkMpAhrgNdyVsahzsGrzE
wx5gHFIc1nBYxyr62w4apUb5jPB7zaXu0LA7EAWDeAe0pyP8hZzLT9kJyOEDsuJu
zwKN2QeLSNMtPbnbKN0I/YQ2za2xX1V5ruhSeOJoVslUI214hgnAURaGshhQNzuZ
2CluDT9KgL5cQifAnKs5kJrwhIYShYNQB+1eDC/7wk28dd/EH+sPALIoF+rqrSmt
Zu4Mdqd+9Ns+oKOjA6br9ULq/Hzg0aDfY82J+XLVVqfF3PXQe8rTDmuMf/7jTn+M
Un7ZOcei9oZF2/9vfAfKQpDCcgD9HvOUSbgqV/ubmkPPmN/LNJzeKj0fBhrRN+Y=
=K12D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Log filtering from Alex and Peter
* Chardev fix from Marc-André
* config.status tweak from David
* Header file tweaks from Markus, myself and Veronia (Outreachy candidate)
* get_ticks_per_sec() removal from Rutuja (Outreachy candidate)
* Coverity fix from myself
* PKE implementation from myself, based on rth's XSAVE support
# gpg: Signature made Thu 24 Mar 2016 20:15:11 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (28 commits)
target-i386: implement PKE for TCG
config.status: Pass extra parameters
char: translate from QIOChannel error to errno
exec: fix error handling in file_ram_alloc
cputlb: modernise the debug support
qemu-log: support simple pid substitution for logs
target-arm: dfilter support for in_asm
qemu-log: dfilter-ise exec, out_asm, op and opt_op
qemu-log: new option -dfilter to limit output
qemu-log: Improve the "exec" TB execution logging
qemu-log: Avoid function call for disabled qemu_log_mask logging
qemu-log: correct help text for -d cpu
tcg: pass down TranslationBlock to tcg_code_gen
util: move declarations out of qemu-common.h
Replaced get_tick_per_sec() by NANOSECONDS_PER_SECOND
hw: explicitly include qemu-common.h and cpu.h
include/crypto: Include qapi-types.h or qemu/bswap.h instead of qemu-common.h
isa: Move DMA_transfer_handler from qemu-common.h to hw/isa/isa.h
Move ParallelIOArg from qemu-common.h to sysemu/char.h
Move QEMU_ALIGN_*() from qemu-common.h to qemu/osdep.h
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Conflicts:
scripts/clean-includes
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manually drop redundant includes that scripts/clean-includes misses,
e.g. because they're hidden in generator programs, or they use the
wrong kind of delimiter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 125b310e1d ("qemu-ga: move
channel/transport functionality into wrapper class") stopped using the
local err variable in channel_event_cb().
This patch deletes the unused variable.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
requester.h relied on qemu/compiler.h definitions to
handle GCC_FMT_ATTR() stub, but this include was removed as part
of scripted clean-ups via 30456d5:
all: Clean up includes
under the assumption that all C files would have included it via
qemu/osdep.h at that point. requester.cpp was likely missed
due to C++ files requiring manual/special handling as well as
VSS build options needing to be enabled to trigger build failures.
Fix this by including qemu/osdep.h. That in turn pulls in a
macro from qapi/error.h that conflicts with a struct field name
in requester.h, so fix that as well by renaming the field.
While we're at it, fix up provider.cpp/install.cpp to include
osdep.h as well.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Laszlo Ersek said: "The length check is off by one (in the safe direction); it
should be (nchars >= 2). The processing should be active for the wide string
L"\r\n" -- resulting in the empty wide string --, I believe."
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* report rather than assert when VCPU count == 0
* fix up subject: s/set-vcpus/get-vcpus/
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
With automatically generated GUID, on minor version changes, an error
occurred, stating that there is a problem with the installer.
Now, a notification is shown, warning the user that another version of
this product is already installed, and that configuration or removal of
the existing version is possible through Add/Remove Programs on the
Control Panel (expected behavior).
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Magic constants are a pain to use, especially when we run the
risk that our choice of '1' for QGA_SEEK_CUR might differ from
the host or guest's choice of SEEK_CUR. Better is to use an
enum value, via a qapi alternate type for back-compatibility.
With this,
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":"cur"}}
becomes a synonym for the older
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":1}}
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-9-git-send-email-peter.maydell@linaro.org
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=YrWd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-11-26' into staging
QMP and QObject patches
# gpg: Signature made Thu 26 Nov 2015 09:07:18 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-monitor-2015-11-26:
qjson: Limit number of tokens in addition to total size
qjson: surprise, allocating 6 QObjects per token is expensive
qjson: store tokens in a GQueue
qjson: Convert to parser to recursive descent
qjson: replace QString in JSONLexer with GString
qjson: Inline token_is_escape() and simplify
qjson: Inline token_is_keyword() and simplify
qjson: Give each of the six structural chars its own token type
qjson: Spell out some silent assumptions
check-qjson: Add test for JSON nesting depth limit
qjson: Don't crash when input exceeds nesting limit
qjson: Apply nesting limit more sanely
monitor: Plug memory leak on QMP error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Even though we still have the "streamer" concept, the tokens can now
be deleted as they are read. While doing so convert from QList to
GQueue, since the next step will make tokens not a QObject and we
will have to do the conversion anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
With previous commit we added gspawn-win64-helper-console.exe,
required for gspawn() mingw implementation.
Unfortunatly when running as a service without interactive
desktop, gspawn() also requires another helper app.
Added gspawn-win64-helper.exe and gspawn-win32-helper.exe
for corresponding architectures.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* remove trailing whitespace
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Exposing OS-specific SEEK_ constants in our qapi was a mistake
(if the host has SEEK_CUR as 1, but the guest has it as 2, then
the semantics are unclear what should happen); if we had a time
machine, we would instead expose only a symbolic enum. It's too
late to change the fact that we have an integer in qapi, but we
can at least document what mapping we want to enforce for all
qga clients (and luckily, it happens to be the mapping that both
Linux and Windows use); then fix the code to match that mapping.
It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE.
In the future, we may wish to move our QGA_SEEK_* constants into
qga/qapi-schema.json, along with updating the schema to take an
alternate type (either the integer, or the string value of the
enum name) - but that's too much risk during hard freeze.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to the specification:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/fopen.html
"the application shall ensure that output is not directly followed by
input without an intervening call to fflush() or to a file positioning
function (fseek(), fsetpos(), or rewind()), and input is not directly
followed by output without an intervening call to a file positioning
function, unless the input operation encounters end-of-file."
Without this change, an fwrite() followed by an fread() may lose the
previously written content, as shown in the following test.
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1210246
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
* don't confuse {write,read}() with f{write,read}() in
commit msg (Laszlo)
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This helper, gspawn-win64-helper-console.exe for 64-bit and
gspawn-win32-helper-console.exe for 32-bit environment,
is needed for gspawn() mingw implementation, used by guest-exec command.
Without these files guest-exec command on Windows will not
work with "file not found" diagnostic message.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This was original behaviour before GLIB gspawn() rework and we rely on
this behaviour.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* add version check (2.33.2) for G_SPAWN_SEARCH_PATH_FROM_ENVP
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
envp == NULL must be passed inside gspawn() if it was not passed with
the command line. Original code inherits environment from the QGA,
which is wrong.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For append file open modes, use FILE_APPEND_DATA for the desired access
for writing at the end of the file.
Version 2:
For "a+", "ab+", and "a+b" modes use FILE_APPEND_DATA|GENERIC_READ.
ORing in GENERIC_READ starts a read at the begining of the file. All
writes will append to the end fo the file.
Added white space to maintain the alignment of the guest_file_open_modes[].
Signed-off-by: Kirk Allan <kallan@suse.com>
Cc: qemu-stable@nongnu.org
* use FILE_GENERIC_APPEND macro, which provides same semantics as
FILE_APPEND_DATA, but retains other flags from GENERIC_WRITE
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Set fd non-blocking to avoid common use cases (like reading from a
named pipe) from hanging the agent. This was missed in the original
code.
The patch introduces qemu_set_handle_nonoblocking, the local analog
of qemu_set_nonblock for HANDLES.
The usage of handles in qemu_set_non/block is impossible, because for
win32 there is a difference between file discriptors and file handles,
and all file ops are made via Win32 api.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
CloseHandle use HANDLE as an argument, but not *HANDLE
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qobject_to_qdict() crashes on null, which is a trap for the unwary.
Return null instead, and simplify a few callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1444918537-18107-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Implemented with base64-encoded strings in qga json protocol.
Glib portable GIOChannel is used for data I/O.
Optinal stdin parameter of guest-exec command is now used as
stdin content for spawned subprocess.
If capture-output bool flag is specified, guest-exec redirects out/err
file descriptiors internally to pipes and collects subprocess
output.
Guest-exe-status is modified to return this collected data to requestor
in base64 encoding.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* switch from 'struct GuestIOExecData' to 'GuestIOExecData'
* s/TRUE/true/g, s/FALSE/false/g for gboolean return values
* s/inp_data/input_data/
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
glib may return G_IO_STATUS_AGAIN which is actually not an error.
Also fixed a bug when on incomplete write buf pointer was not adjusted.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qemu-ga should not exit on guest-file-write to pipe without read end
but proper error code should be returned. The behavior of the
spawned process should be default thus SIGPIPE processing should be
reset to default after fork() but before exec().
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Guest-exec rewritten in platform-independent style with glib spawn.
Child process is spawn asynchronously and exit status can later
be picked up by guest-exec-status command.
stdin/stdout/stderr of the child now is redirected to /dev/null
Later we will add ability to specify stdin in guest-exec command
and to get collected stdout/stderr with guest-exec-status.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* use g_new0 in place of g_malloc for GuestExec struct
* commit msg spelling fixes
* s/inp-data/input-data
* document capture-input mode as false by default
* use GetProcessId() for pids on w32 instead of casting HANDLE
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This just makes code shorter and better.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Some guests don't expose memory blocks via sysfs at all. This
shouldn't be a failure, instead just return an empty list. For
other access failures we still report an error.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Move the default verbosity settings before loading the configuration
file, or it will overwrite it. Found thanks to writing qga tests :)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Having a environment variable allows to override default configuration
path, useful for testing. Note that this can't easily be an argument,
since loading config is done before parsing the arguments.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For consistency with the rest of the comment blocks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.
The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This is particularly useful when we abort in error_propagate(),
because there the stack backtrace doesn't lead to where the error was
created. Looks like this:
Unexpected error in parse_block_error_action() at .../qemu/blockdev.c:322:
qemu-system-x86_64: -drive if=none,werror=foo: 'foo' invalid write error action
Aborted (core dumped)
Note: to get this example output, I monkey-patched drive_new() to pass
&error_abort to blockdev_init().
To keep the error handling boiler plate from growing even more, all
error_setFOO() become macros expanding into error_setFOO_internal()
with additional __FILE__, __LINE__, __func__ arguments. Not exactly
pretty, but it works.
The macro trickery breaks down when you take the address of an
error_setFOO(). Fortunately, we do that in just one place: qemu-ga's
Windows VSS provider and requester DLL wants to call
error_setg_win32() through a function pointer "to avoid linking glib
to the DLL". Use error_setg_win32_internal() there. The use of the
function pointer is already wrapped in a macro, so the churn isn't
bad.
Code size increases by some 35KiB for me (0.7%). Tolerable. Could be
less if we passed relative rather than absolute source file names to
the compiler, or forwent reporting __func__.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
requester.cpp uses this pattern to receive an error and pass it on to
the caller (err_is_set() macro peeled off for clarity):
... code that may set errset->errp ...
if (errset->errp && *errset->errp) {
... handle error ...
}
This breaks when errset->errp is null. As far as I can tell, it
currently isn't, so this is merely fragile, not actually broken.
The robust way to do this is to receive the error in a local variable,
then propagate it up, like this:
Error *err = NULL;
... code that may set err ...
if (err)
... handle error ...
error_propagate(errset->errp, err);
}
See also commit 5e54769, 0f230bf, a903f40.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qga_vss_fsfreeze() casts error_set_win32() from
void (*)(Error **, int, ErrorClass, const char *, ...)
to
void (*)(void **, int, int, const char *, ...)
The result is later called. Since the two types are not compatible,
the call is undefined behavior. It works in practice anyway.
However, there's no real need for trickery here. Clean it up as
follows:
* Declare struct Error, and fix the first parameter.
* Switch to error_setg_win32(). This gets rid of the troublesome
ErrorClass parameter. Requires converting error_setg_win32() from
macro to function, but that's trivially easy, because this is the
only user of error_set_win32().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Use NetUserSetInfo() to set the user password.
This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This new option allows to review the agent configuration,
and ease the task of writing a configuration file.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
* removed unecessary keyfile != NULL prior to free
* documented --dump-conf is qemu-ga --help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Learn to configure the agent with a system configuration.
This may simplify command-line handling, especially when the blacklist
is long.
Among the other benefits, this may standardize the configuration of an
init service (instead of distro-specific init keys/files)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
* removed unecessary keyfile != NULL prior to free
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Now that main() has a single exit point, we can free a few
more allocations.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Once the options are populated, move the running state to
a run_agent() function.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
* fixed up an s/ga_state/s/ artifact causing segfault
* replaced g_list_free_full with g_list_foreach to maintain glib
2.22 compatibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fill all default options during main(). This is a preparation patch
to allow to dump the configuration.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Move option parsing out of giant main().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Following patch will return allocated strings, so we must correctly
initialize alloc & free them. The nice side effect is that we no longer
have to check for "fixed_state_dir" to call ga_install_service() with a
NULL state dir. The default values are set after parsing the command
line options.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
'path' is already a global function, rename the variable since it's
going to be in global scope in a later patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In order to avoid any confusion, let's allocate new strings when
splitting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The function is going to be reused in a later patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The option parsing is going to be moved to a separate function,
use exit() consistently.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Previously, if building out-of-tree, the MSI build would fail since
it wasn't able to find the needed files.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
* fixed up commit msg formating
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Previously, running the .msi would unregister the QEMU GA VSS service if QEMU GA was already installed on the machine, and then register it only if QEMU GA was NOT previously installed. This behavior caused the service to be registered only after the INITIAL installation, and any subsequent run of the .msi (to redo, repair, or upgrade the installation) ended in the service being unregistered.
Now, the VSS service is still unregistered if QEMU GA is already installed (so that a fix or an update could be performed) but then it is registered again (if the GA is not being uninstalled) thus finishing the repair/upgrade correctly. Additionally, downgrading is now prevented. If a user would like to downgrade a version, he/she must uninstall the newer version first.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This is done to follow the recommendations given here: https://msdn.microsoft.com/en-us/library/aa368269%28VS.85%29.aspx
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For compatibility, all the letters in GUID should be capital.
Signed-off-by: Leonid Bloch <leonid@daynix.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*added semi-colon to better delineate 2.2 vs. 2.4 versioning
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.
This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.
In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su
SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to Microsoft disk location path can be obtained via
IOCTL_SCSI_GET_ADDRESS. Unfortunately this ioctl can not be used for all
devices. There are certain bus types which could be obtained with this
API. Please, refer to the following link for more details
https://technet.microsoft.com/en-us/library/ee851589(v=ws.10).aspx
Bus type could be obtained using IOCTL_STORAGE_QUERY_PROPERTY. Enum
STORAGE_BUS_TYPE describes all buses supported by OS.
Windows defines more bus types than Linux. Thus some values have been added
to GuestDiskBusType.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* fixed warning in CreateFile due to use of NULL instead of 0
* only provide disk info when CONFIG_QGA_NTDDSCSI=y
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We should use GetVolumeXXX api to work with volumes. This will help us to
resolve the situation with volumes without drive letter, i.e. when the
volume is mounted as a folder. Such volume is called mounted folder.
This volume is a regular mounted volume from all other points of view.
The information about non mounted volume is reported as System Reserved.
This volume is not mounted and thus it is not writable.
GuestDiskAddressList API is not used because operations are performed with
volumes but no with disks. This means that spanned disk will
be counted and handled as a single volume. It is worth mentioning
that the information about every disk in the volume can be queried
via IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We need qmp_quest_get_fsinfo togather with vss-provider, which works with
volumes. The call to this function is implemented via
FindFirst/NextVolumes. Moreover, volumes in Windows OS are filesystem unit,
so it will be more effective to work with them rather with devices.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It's possible to set system time with dates after 2070, however, it's
not possible to set the RTC. It has limitation to up to year
2070 (1970+100). In order to keep both clock in sync and before the
kernel complains on invalid values, bail out early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
By default, IPv4 prefixes will be derived by matching the address
to those returned by GetAdaptersInfo. IPv6 prefixes can not be
matched this way due to the unpredictable order of entries.
In Windows Vista/2008 guests and newer, both IPv4 and IPv6 prefixes
can be retrieved from OnLinkPrefixLength. Setting --extra-cflags
in the build configuration to "-D_WIN32_WINNT=0x600"
or greater makes OnLinkPrefixLength available. Setting --extra-cflags
is not required and if not set, the default approach to get the prefix
will be taken.
Signed-off-by: Kirk Allan <kallan@suse.com>
* drop ws2ipdef.h, it's missing on old mingw, and ws2tcpip.h already
includes it automatically on new builds
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since we now require GLib 2.22+ (commit f40685c), we don't have to
work around lack of g_strcmp0() anymore.
This reverts commit 8f47747899.
Conflicts:
qemu-ga.c
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
