The error message for a "stepping" value that is out of bounds is a
bit odd:
$ qemu-system-x86_64 -cpu qemu64,stepping=16
qemu-system-x86_64: can't apply global qemu64-x86_64-cpu.stepping=16: Property .stepping doesn't take value 16 (minimum: 0, maximum: 15)
The "can't apply global" part is an unfortunate artifact of -cpu's
implementation. Left for another day.
The remainder feels overly verbose. Change it to
qemu64-x86_64-cpu: can't apply global qemu64-x86_64-cpu.stepping=16: parameter 'stepping' can be at most 15
Likewise for "family", "model", and "tsc-frequency".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-6-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Properties "family", "model", and "stepping" are visited as signed
integers. They are backed by bits in CPUX86State member
@cpuid_version. The code to extract and insert these bits mixes
signed and unsigned. Not actually wrong, but avoiding such mixing is
good practice.
Visit them as unsigned integers instead.
This adds a few mildly ugly cast in arguments of error_setg(). The
next commit will get rid of them again.
Property "tsc-frequency" is also visited as signed integer. The value
ultimately flows into the kernel, where it is 31 bits unsigned. The
QEMU code freely mixes int, uint32_t, int64_t. I elect not to attempt
draining this swamp today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-5-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
* target/i386: Fixes for IN and OUT with REX prefix
* target/i386: New CPUID features and logic fixes
* target/i386: Add support save/load HWCR MSR
* target/i386: Move more instructions to new decoder; separate decoding
and IR generation
* target/i386/tcg: Use DPL-level accesses for interrupts and call gates
* accel/kvm: perform capability checks on VM file descriptor when necessary
* accel/kvm: dynamically sized kvm memslots array
* target/i386: fixes for Hyper-V
* docs/system: Add recommendations to Hyper-V enlightenments doc
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcRTIoUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCewf8DnZbz7/0beql2YycrdPJZ3xnmfWW
JenWKIThKHGWRTW2ODsac21n0TNXE0vsOYjw/Z/dNLO+72sLcqvmEB18+dpHAD2J
ltb8OvuROc3nn64OEi08qIj7JYLmJ/osroI+6NnZrCOHo8nCirXoCHB7ZPqAE7/n
yDnownWaduXmXt3+Vs1mpqlBklcClxaURDDEQ8CGsxjC3jW03cno6opJPZpJqk0t
6aX92vX+3lNhIlije3QESsDX0cP1CFnQmQlNNg/xzk+ZQO+vSRrPV+A/N9xf8m1b
HiaCrlBWYef/sLgOHziOSrJV5/N8W0GDEVYDmpEswHE81BZxrOTZLxqzWw==
=qwfc
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* tcg/s390x: Fix for TSTEQ/TSTNE
* target/i386: Fixes for IN and OUT with REX prefix
* target/i386: New CPUID features and logic fixes
* target/i386: Add support save/load HWCR MSR
* target/i386: Move more instructions to new decoder; separate decoding
and IR generation
* target/i386/tcg: Use DPL-level accesses for interrupts and call gates
* accel/kvm: perform capability checks on VM file descriptor when necessary
* accel/kvm: dynamically sized kvm memslots array
* target/i386: fixes for Hyper-V
* docs/system: Add recommendations to Hyper-V enlightenments doc
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcRTIoUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCewf8DnZbz7/0beql2YycrdPJZ3xnmfWW
# JenWKIThKHGWRTW2ODsac21n0TNXE0vsOYjw/Z/dNLO+72sLcqvmEB18+dpHAD2J
# ltb8OvuROc3nn64OEi08qIj7JYLmJ/osroI+6NnZrCOHo8nCirXoCHB7ZPqAE7/n
# yDnownWaduXmXt3+Vs1mpqlBklcClxaURDDEQ8CGsxjC3jW03cno6opJPZpJqk0t
# 6aX92vX+3lNhIlije3QESsDX0cP1CFnQmQlNNg/xzk+ZQO+vSRrPV+A/N9xf8m1b
# HiaCrlBWYef/sLgOHziOSrJV5/N8W0GDEVYDmpEswHE81BZxrOTZLxqzWw==
# =qwfc
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 17 Oct 2024 18:42:34 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (26 commits)
target/i386: Use only 16 and 32-bit operands for IN/OUT
accel/kvm: check for KVM_CAP_MEMORY_ATTRIBUTES on vm
accel/kvm: check for KVM_CAP_MULTI_ADDRESS_SPACE on vm
accel/kvm: check for KVM_CAP_READONLY_MEM on VM
target/i386/tcg: Use DPL-level accesses for interrupts and call gates
KVM: Rename KVMState->nr_slots to nr_slots_max
KVM: Rename KVMMemoryListener.nr_used_slots to nr_slots_used
KVM: Define KVM_MEMSLOTS_NUM_MAX_DEFAULT
KVM: Dynamic sized kvm memslots array
target/i386: assert that cc_op* and pc_save are preserved
target/i386: list instructions still in translate.c
target/i386: do not check PREFIX_LOCK in old-style decoder
target/i386: convert CMPXCHG8B/CMPXCHG16B to new decoder
target/i386: decode address before going back to translate.c
target/i386: convert bit test instructions to new decoder
tcg/s390x: fix constraint for 32-bit TSTEQ/TSTNE
docs/system: Add recommendations to Hyper-V enlightenments doc
target/i386: Make sure SynIC state is really updated before KVM_RUN
target/i386: Exclude 'hv-syndbg' from 'hv-passthrough'
target/i386: Fix conditional CONFIG_SYNDBG enablement
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Stack accesses should be explicit and use the privilege level of the
target stack. This ensures that SMAP is not applied when the target
stack is in ring 3.
This fixes a bug wherein i386/tcg assumed that an interrupt return, or a
far call using the CALL or JMP instruction, was always going from kernel
or user mode to kernel mode when using a call gate. This assumption is
violated if the call gate has a DPL that is greater than 0.
Analyzed-by: Robert R. Henry <rrh.henry@gmail.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/249
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now all decoding has been done before any code generation.
There is no need anymore to save and restore cc_op* and
pc_save but, for the time being, assert that this is indeed
the case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Group them so that it is easier to figure out which two-byte opcodes to
tackle together.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is already checked before getting there.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The gen_cmpxchg8b and gen_cmpxchg16b functions even have the correct
prototype already; the only thing that needs to be done is removing the
gen_lea_modrm() call.
This moves the last LOCK-enabled instructions to the new decoder. It is
now possible to assume that gen_multi0F is called only after checking
that PREFIX_LOCK was not specified.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are now relatively few unconverted opcodes in translate.c (there
are 13 of them including 8 for x87), and all of them have the same
format with a mod/rm byte and no immediate. A good next step is
to remove the early bail out to disas_insn_x87/disas_insn_old,
instead giving these legacy translator functions the same prototype
as the other gen_* functions.
To do this, the X86DecodeInsn can be passed down to the places that
used to fetch address bytes from the instruction stream. To make
sure that everything is done cleanly, the CPUX86State* argument is
removed.
As part of the unification, the gen_lea_modrm() name is now free,
so rename gen_load_ea() to gen_lea_modrm(). This is as good a name
and it makes the changes to translate.c easier to review.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code generation was rewritten; it reuses the same trick to use the
CC_OP_SAR values for cc_op, but it tries to use CC_OP_ADCX or CC_OP_ADCOX
instead of CC_OP_EFLAGS. This is a tiny bit more efficient in the
common case where only CF is checked in the resulting flags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
=uk+a
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241016
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'hyperv_synic' test from KVM unittests was observed to be flaky on certain
hardware (hangs sometimes). Debugging shows that the problem happens in
hyperv_sint_route_new() when the test tries to set up a new SynIC
route. The function bails out on:
if (!synic->sctl_enabled) {
goto cleanup;
}
but the test writes to HV_X64_MSR_SCONTROL just before it starts
establishing SINT routes. Further investigation shows that
synic_update() (called from async_synic_update()) happens after the SINT
setup attempt and not before. Apparently, the comment before
async_safe_run_on_cpu() in kvm_hv_handle_exit() does not correctly describe
the guarantees async_safe_run_on_cpu() gives. In particular, async worked
added to a CPU is actually processed from qemu_wait_io_event() which is not
always called before KVM_RUN, i.e. kvm_cpu_exec() checks whether an exit
request is pending for a CPU and if not, keeps running the vCPU until it
meets an exit it can't handle internally. Hyper-V specific MSR writes are
not automatically trigger an exit.
Fix the issue by simply raising an exit request for the vCPU where SynIC
update was queued. This is not a performance critical path as SynIC state
does not get updated so often (and async_safe_run_on_cpu() is a big hammer
anyways).
Reported-by: Jan Richter <jarichte@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-4-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows with Hyper-V role enabled doesn't boot with 'hv-passthrough' when
no debugger is configured, this significantly limits the usefulness of the
feature as there's no support for subtracting Hyper-V features from CPU
flags at this moment (e.g. "-cpu host,hv-passthrough,-hv-syndbg" does not
work). While this is also theoretically fixable, 'hv-syndbg' is likely
very special and unneeded in the default set. Genuine Hyper-V doesn't seem
to enable it either.
Introduce 'skip_passthrough' flag to 'kvm_hyperv_properties' and use it as
one-off to skip 'hv-syndbg' when enabling features in 'hv-passthrough'
mode. Note, "-cpu host,hv-passthrough,hv-syndbg" can still be used if
needed.
As both 'hv-passthrough' and 'hv-syndbg' are debug features, the change
should not have any effect on production environments.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-3-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Putting HYPERV_FEAT_SYNDBG entry under "#ifdef CONFIG_SYNDBG" in
'kvm_hyperv_properties' array is wrong: as HYPERV_FEAT_SYNDBG is not
the highest feature number, the result is an empty (zeroed) entry in
the array (and not a skipped entry!). hyperv_feature_supported() is
designed to check that all CPUID bits are set but for a zeroed
feature in 'kvm_hyperv_properties' it returns 'true' so QEMU considers
HYPERV_FEAT_SYNDBG as always supported, regardless of whether KVM host
actually supports it.
To fix the issue, leave HYPERV_FEAT_SYNDBG's definition in
'kvm_hyperv_properties' array, there's nothing wrong in having it defined
even when 'CONFIG_SYNDBG' is not set. Instead, put "hv-syndbg" CPU property
under '#ifdef CONFIG_SYNDBG' to alter the existing behavior when the flag
is silently skipped in !CONFIG_SYNDBG builds.
Leave an 'assert' sentinel in hyperv_feature_supported() making sure there
are no 'holes' or improperly defined features in 'kvm_hyperv_properties'.
Fixes: d8701185f4 ("hw: hyperv: Initial commit for Synthetic Debugging device")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240917160051.2637594-2-vkuznets@redhat.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM commit 191c8137a939 ("x86/kvm: Implement HWCR support")
introduced support for emulating HWCR MSR.
Add support for QEMU to save/load this MSR for migration purposes.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Signed-off-by: Wang Liang <wangliang44@baidu.com>
Link: https://lore.kernel.org/r/20241009095109.66843-1-gaoshiyuan@baidu.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Following 5 bits in CPUID.7.2.EDX are supported by KVM. Add their
supports in QEMU. Each of them indicates certain bits of IA32_SPEC_CTRL
are supported. Those bits can control CPU speculation behavior which can
be used to defend against side-channel attacks.
bit0: intel-psfd
if 1, indicates bit 7 of the IA32_SPEC_CTRL MSR is supported. Bit 7 of
this MSR disables Fast Store Forwarding Predictor without disabling
Speculative Store Bypass
bit1: ipred-ctrl
If 1, indicates bits 3 and 4 of the IA32_SPEC_CTRL MSR are supported.
Bit 3 of this MSR enables IPRED_DIS control for CPL3. Bit 4 of this
MSR enables IPRED_DIS control for CPL0/1/2
bit2: rrsba-ctrl
If 1, indicates bits 5 and 6 of the IA32_SPEC_CTRL MSR are supported.
Bit 5 of this MSR disables RRSBA behavior for CPL3. Bit 6 of this MSR
disables RRSBA behavior for CPL0/1/2
bit3: ddpd-u
If 1, indicates bit 8 of the IA32_SPEC_CTRL MSR is supported. Bit 8 of
this MSR disables Data Dependent Prefetcher.
bit4: bhi-ctrl
if 1, indicates bit 10 of the IA32_SPEC_CTRL MSR is supported. Bit 10
of this MSR enables BHI_DIS_S behavior.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20240919051011.118309-1-chao.gao@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When user sets tsc-frequency explicitly, the invtsc feature is actually
migratable because the tsc-frequency is supposed to be fixed during the
migration.
See commit d99569d9d8 ("kvm: Allow invtsc migration if tsc-khz
is set explicitly") for referrence.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240814075431.339209-10-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- CPUID.(EAX=07H,ECX=0H):EBX[bit 6]: x87 FPU Data Pointer updated only
on x87 exceptions if 1.
- CPUID.(EAX=07H,ECX=0H):EBX[bit 13]: Deprecates FPU CS and FPU DS
values if 1. i.e., X87 FCS and FDS are always zero.
Define names for them so that they can be exposed to guest with -cpu host.
Also define the bit field MACROs so that named cpu models can add it as
well in the future.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240814075431.339209-3-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, QEMU always constructs a all-zero CPUID entry for
CPUID[0xD 0x3f].
It's meaningless to construct such a leaf as the end of leaf 0xD. Rework
the logic of how subleaves of 0xD are constructed to get rid of such
all-zero value of subleaf 0x3f.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240814075431.339209-2-xiaoyao.li@intel.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Variable env->cf[i] is defined as bool type, it is treated as int type
with shift operation. However the max possible width is 56 for the shift
operation, exceeding the width of int type. And there is existing api
read_fcc() which is converted to u64 type with bitwise shift, it can be
used to dump fp registers into coredump note segment.
Resolves: Coverity CID 1561133
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240914064645.2099169-1-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
mips_cpu_create_with_clock() creates a vCPU. Pass it the vCPU
endianness requested by argument. Update the board call sites.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-17-philmd@linaro.org>
Add the "big-endian" property and set the CP0C0_BE bit in CP0_Config0.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-15-philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer, this
save a call to tcg_gen_movi_tl(), often saving a temp register.
Most of the places found using the following Coccinelle spatch script:
@@
identifier tmp;
constant val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_tl(tmp, val);
@@
identifier tmp;
int val;
@@
* TCGv tmp = tcg_temp_new();
...
* tcg_gen_movi_i64(tmp, val);
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-2-philmd@linaro.org>
Replace tcg_gen_movi_tl() + gen_op_addr_add() by a single
gen_op_addr_addi() call.
gen_op_addr_addi() calls tcg_gen_addi_tl() which might
optimize if the immediate is zero.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-13-philmd@linaro.org>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-12-philmd@linaro.org>
Introduce mo_endian() which returns the endian MemOp
corresponding to the vCPU DisasContext.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-10-philmd@linaro.org>
MEMOP_IDX() is unused since commit 948f88661c ("target/mips:
Use cpu_*_data_ra for msa load/store"), remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241014232235.51988-1-philmd@linaro.org>
In commit 6d0cad1259 ("target/mips: Finish conversion to
tcg_gen_qemu_{ld,st}_*") we renamed the argument of the user
definition. Rename the system part for coherency. Since the
argument is ignored, prefix with 'ignored_'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-9-philmd@linaro.org>
Extract the implicit MO_TE definition in order to replace
it by runtime variable in the next commit.
Mechanical change using:
$ for n in UW UL UQ UO SW SL SQ; do \
sed -i -e "s/MO_TE$n/MO_TE | MO_$n/" \
$(git grep -l MO_TE$n target/mips); \
done
manually remove superfluous parenthesis in nanoMIPS gen_save().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-8-philmd@linaro.org>
Instead of swapping the reversed target endianness
using MO_BSWAP, directly return the correct endianness.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-7-philmd@linaro.org>
Functions are easier to rework than macros. Besides,
there is no gain here in inlining these.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-6-philmd@linaro.org>
Replace compile-time MO_TE evaluation by runtime mo_endian_env()
one, which expand target endianness from vCPU env.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-5-philmd@linaro.org>
Introduce mo_endian_env() which returns the endian
MemOp corresponding to the vCPU env.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-4-philmd@linaro.org>
Methods using the 'cpu_' prefix usually take a (Arch)CPUState
argument. Since this method takes a DisasContext argument,
rename it as disas_is_bigendian().
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-3-philmd@linaro.org>
In order to re-use cpu_is_bigendian(), declare it on "internal.h"
after renaming it as mips_env_is_bigendian().
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-2-philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer,
this save a call to tcg_gen_movi_tl() and a temp register.
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-4-philmd@linaro.org>
Directly use tcg_constant_tl() for constant integer,
this save a call to tcg_gen_movi_tl().
Inspired-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004202621.4321-3-philmd@linaro.org>
The TriCore architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/tricore/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-15-philmd@linaro.org>
The LoongArch architecture uses little endianness. Directly
use the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/loongarch/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-13-philmd@linaro.org>
The AVR architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/avr/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-11-philmd@linaro.org>
The Hexagon architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/hexagon/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-8-philmd@linaro.org>
The Alpha architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' target/alpha/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-7-philmd@linaro.org>
The Alpha target is only built for 64-bit.
Using ldtul_p() is pointless, replace by ldq_p().
Mechanical change doing:
$ sed -i -e 's/ldtul_p/ldq_p/' $(git grep -wl ldtul_p target/alpha/)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-4-philmd@linaro.org>
The Hexagon target is only built for 32-bit.
Using ldtul_p() is pointless, replace by ldl_p().
Mechanical change doing:
$ sed -i -e 's/ldtul_p/ldl_p/' \
$(git grep -wl ldtul_p target/hexagon/)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-3-philmd@linaro.org>
Now that we have the MemOp for the access, we can order
the alignment fault caused by memory type before the
permission fault for the page.
For subsequent page hits, permission and stage 2 checks
are known to pass, and so the TLB_CHECK_ALIGNED fault
raised in generic code is not mis-ordered.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fill in the tlb_fill_align hook. Handle alignment not due to
memory type, since that's no longer handled by generic code.
Pass memop to get_phys_addr.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
