The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add configure interrupt support in virtio-mmio bus.
add function to set configure guest notifier.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20221222070451.936503-10-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make virtio_mmio_soft_reset reset the virtio device, which is performed by
both the "soft" and the "hard" reset; and then call virtio_mmio_soft_reset
from virtio_mmio_reset to emphasize that the latter is a superset of the
former.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All calls to virtio_bus_reset are preceded by virtio_bus_stop_ioeventfd,
move the call in virtio_bus_reset: that makes sense and clarifies
that the vdc->reset function is called with ioeventfd already stopped.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the queue PFN is set to zero on a virtio-mmio device, the device is reset.
In that case however the virtio_bus_stop_ioeventfd function was not
called; add it so that the behavior is similar to when status is set to 0.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The migration code will not look at a VMStateDescription's
minimum_version_id_old field unless that VMSD has set the
load_state_old field to something non-NULL. (The purpose of
minimum_version_id_old is to specify what migration version is needed
for the code in the function pointed to by load_state_old to be able
to handle it on incoming migration.)
We have exactly one VMSD which still has a load_state_old,
in the PPC CPU; every other VMSD which sets minimum_version_id_old
is doing so unnecessarily. Delete all the unnecessary ones.
Commit created with:
sed -i '/\.minimum_version_id_old/d' $(git grep -l '\.minimum_version_id_old')
with the one legitimate use then hand-edited back in.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
It missed vmstate_ppc_cpu.
This reverts commit d48185f1a4.
Fixes: d48185f1a4 ("virtio-mmio: add support for configure interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add configure interrupt support for virtio-mmio bus. This
interrupt will be working while the backend is vhost-vdpa
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-10-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The root cause for this crash is the ioeventfd not stopped while the VM stop.
The callback for vmstate_change was not implement in virtio-mmio bus
Reproduce step
load the vm with
-M microvm \
-netdev tap,id=net0,vhostforce,script=no,downscript=no \
-device virtio-net-device,netdev=net0\
After the VM boot, login the vm and then shutdown the vm
System will crash
[Current thread is 1 (Thread 0x7ffff6edde00 (LWP 374378))]
(gdb) bt
0 0x00005555558f18b4 in qemu_flush_or_purge_queued_packets (purge=false, nc=0x55500252e850) at ../net/net.c:636
1 qemu_flush_queued_packets (nc=0x55500252e850) at ../net/net.c:656
2 0x0000555555b6c363 in virtio_queue_notify_vq (vq=0x7fffe7e2b010) at ../hw/virtio/virtio.c:2339
3 virtio_queue_host_notifier_read (n=0x7fffe7e2b08c) at ../hw/virtio/virtio.c:3583
4 0x0000555555de7b5a in aio_dispatch_handler (ctx=ctx@entry=0x5555567c5780, node=0x555556b83fd0) at ../util/aio-posix.c:329
5 0x0000555555de8454 in aio_dispatch_ready_handlers (ready_list=<optimized out>, ctx=<optimized out>) at ../util/aio-posix.c:359
6 aio_poll (ctx=0x5555567c5780, blocking=blocking@entry=false) at ../util/aio-posix.c:662
7 0x0000555555cce0cc in monitor_cleanup () at ../monitor/monitor.c:645
8 0x0000555555b06bd2 in qemu_cleanup () at ../softmmu/runstate.c:822
9 0x000055555586e693 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at ../softmmu/main.c:51
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211109023744.22387-1-lulu@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename qbus_create_inplace() to qbus_init(); this is more in line
with our usual naming convention for functions that in-place
initialize objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20210923121153.23754-5-peter.maydell@linaro.org
virtio devices support separate iothreads waiting for
events from file descriptors. These are asynchronous
events that can't be recorded and replayed, therefore
this patch disables ioeventfd for all devices when
record or replay is enabled.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <162125678869.1252810.4317416444097392406.stgit@pasha-ThinkPad-X280>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds ioeventfd flag for virtio-mmio configuration.
It allows switching ioeventfd on and off.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161700379211.1135943.8859209566937991305.stgit@pasha-ThinkPad-X280>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both functions don't check the personality of the interface (legacy or
modern) before accessing the configuration memory and always use
virtio_config_readX()/virtio_config_writeX().
With this patch, they now check the personality and in legacy mode
call virtio_config_readX()/virtio_config_writeX(), otherwise call
virtio_config_modern_readX()/virtio_config_modern_writeX().
This change has been tested with virtio-mmio guests (virt stretch/armhf and
virt sid/m68k) and virtio-pci guests (pseries RHEL-7.3/ppc64 and /ppc64le).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210314200300.3259170-1-laurent@vivier.eu>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment the following QEMU command line triggers an assertion
failure On xlnx-versal SOC:
qemu-system-aarch64 \
-machine xlnx-versal-virt -nographic -smp 2 -m 128 \
-fsdev local,id=shareid,path=${HOME}/work,security_model=none \
-device virtio-9p-device,fsdev=shareid,mount_tag=share \
-fsdev local,id=shareid1,path=${HOME}/Music,security_model=none \
-device virtio-9p-device,fsdev=shareid1,mount_tag=share1
qemu-system-aarch64: ../migration/savevm.c:860:
vmstate_register_with_alias_id:
Assertion `!se->compat || se->instance_id == 0' failed.
This problem was fixed on arm virt platform in commit f58b39d2d5
("virtio-mmio: format transport base address in BusClass.get_dev_path")
It works perfectly on arm virt platform. but there is still there on
xlnx-versal SOC.
The main difference between arm virt and xlnx-versal is they use
different way to create virtio-mmio qdev. on arm virt, it calls
sysbus_create_simple("virtio-mmio", base, pic[irq]); which will call
sysbus_mmio_map internally and assign base address to subsys device
mmio correctly. but xlnx-versal's implements won't do this.
However, xlnx-versal can't switch to sysbus_create_simple() to create
virtio-mmio device. It's because xlnx-versal's cpu use
VersalVirt.soc.fpd.apu.mr as it's memory. which is subregion of
system_memory. sysbus_create_simple will add virtio to system_memory,
which can't be accessed by cpu.
Besides, xlnx-versal can't add sysbus_mmio_map api call too, because
this will add memory region to system_memory, and it can't be added
to VersalVirt.soc.fpd.apu.mr again.
We can solve this by assign correct base address offset on dev_path.
This path was test on aarch64 virt & xlnx-versal platform.
Signed-off-by: schspa <schspa@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the kernel, virtio_gpu_init() uses virtio_get_shm_region()
since
commit 6076a9711dc5 ("drm/virtio: implement blob resources: probe for host visible region")
but vm_get_shm_region() unconditionally uses VIRTIO_MMIO_SHM_SEL to
get the address and the length of the region.
commit 38e895487afc ("virtio: Implement get_shm_region for MMIO transport"
As this is not implemented in QEMU, address and length are 0 and passed
as is to devm_request_mem_region() that triggers a crash:
[drm:virtio_gpu_init] *ERROR* Could not reserve host visible region
Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
According to the comments in the kernel, a non existent shared region
has a length of (u64)-1.
This is what we return now with this patch to disable the region.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201220163539.2255963-1-laurent@vivier.eu>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Some guests read back queue size after writing it.
Always update the on size write otherwise they might be confused.
Cc: qemu-stable@nongnu.org
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191224081446.17003-1-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment when the guest writes a status of 0, we only reset the
virtio core state but not the virtio-mmio state. The virtio-mmio
specification says (v1.1 cs01, 4.2.2.1 Device Requirements:
MMIO Device Register Layout):
Upon reset, the device MUST clear all bits in InterruptStatus and
ready bits in the QueueReady register for all queues in the device.
The core already takes care of InterruptStatus by clearing isr, but we
still need to clear QueueReady.
It would be tempting to clean all registers, but since the specification
doesn't say anything more, guests could rely on the registers keeping
their state across reset. Linux for example, relies on this for
GuestPageSize in the legacy MMIO tranport.
Fixes: 44e687a4d9 ("virtio-mmio: implement modern (v2) personality (virtio-1)")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20191213095410.1516119-1-jean-philippe@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Put QOM and main struct definition in a separate header file, so it
can be accessed from other components.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Implement the modern (v2) personality, according to the VirtIO 1.0
specification.
Support for v2 among guests is not as widespread as it'd be
desirable. While the Linux driver has had it for a while, support is
missing, at least, from Tianocore EDK II, NetBSD and FreeBSD.
For this reason, the v2 personality is disabled, keeping the legacy
behavior as default. Machine types willing to use v2, can enable it
using MachineClass's compat_props.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20190913120559.40835-1-slp@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Use traces for debug message and qemu_log_mask for errors.
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Message-Id: <20190503154424.73933-1-liboxuan@connect.hku.hk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Because guest mask notifier cannot be used in vhost-user mode, a boolean
flag "use_guest_notifier_mask" was added in commit 5669655aaf to disable
the use of guest mask notifier under virtio-pci. However this flag wasn't
checked in other virtio devices, such as virtio-mmio. In our tests, it
caused assertion error under "vhost-user + virtio-mmio". This patch
addresses this problem by adding a check before guest_notifier_mask is
called.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be needed once dataplane will be able to set it outside
the big QEMU lock.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be used to forbid iothread configuration when the
proxy does not allow using ioeventfd. To simplify the implementation,
change the direction of the ioeventfd_disabled callback too.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_started
and ioeventfd_set_started callback. The only difference is
in how virtio-ccw handles an error---it doesn't disable
ioeventfd forever anymore. It was the only backend to do
so, and if desired this behavior should be implemented in
virtio-bus.c.
Instead of ioeventfd_started, the ioeventfd_assign callback now
determines whether the virtio bus supports host notifiers.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This simplifies the code and removes the ioeventfd_set_disabled
callback.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment the following QEMU command line triggers an assertion
failure (minimal reproducer by Cole):
qemu-system-aarch64 \
-machine virt-2.6,accel=tcg \
-nodefaults \
-no-user-config \
-nographic -monitor stdio \
-device virtio-scsi-device,id=scsi0 \
-device virtio-scsi-device,id=scsi1 \
-drive file=foo.img,format=raw,if=none,id=d0 \
-device scsi-hd,bus=scsi0.0,drive=d0 \
-drive file=foo.img,format=raw,if=none,id=d1 \
-device scsi-hd,bus=scsi1.0,drive=d1
qemu-system-aarch64: migration/savevm.c:615:
vmstate_register_with_alias_id:
Assertion `!se->compat || se->instance_id == 0' failed.
The reason is that the vmstate sections for the two scsi-hd devices are
not uniquely identifiable by name.
The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 --
support the BusClass.get_dev_path member function. scsibus_get_dev_path()
formats a device path prefix with the help of its topologically parent
bus, and then appends the chan🆔lun triplet to it. For both scsi-hd
devices, this triplet is 0:0:0.
(Here we use "device path" in the QEMU migration sense, for vmstate
section identification, not in the OFW or UEFI device path senses.)
The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by
the internal VirtIOMMIOProxy device). This bus class
(TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function,
the virtio_bus_get_dev_path() method from its parent class
(TYPE_VIRTIO_BUS).
virtio_bus_get_dev_path() does not format any kind of device address on
its own; "virtio addresses" are transport-specific. Therefore
virtio_bus_get_dev_path() asks the topologically parent bus of the proxy
object (implementing the specific virtio transport) to format the address
of the proxy object.
(For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy,
plugged into a PCI bus), this ends up in pcibus_get_dev_path().)
However, VirtIOMMIOProxy is usually (in practice: always) plugged into
"main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass
does not support formatting QEMU vmstate device paths at all (as
SysBusDevice objects can have zero or more IO ports and zero or more MMIO
regions). Hence the formatting request delegated from
virtio_bus_get_dev_path() gets answered with NULL.
The end result is that the two scsi-hd devices end up with the same device
path "0:0:0", which triggers the assert.
We can solve this by recognizing that virtio-mmio transports are
distinguished from each other by their base addresses in MMIO address
space. Implement virtio_mmio_bus_get_dev_path() as follows:
(1) The virtio device whose devpath is to be formatted resides on a
virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask
the parent bus of VirtIOMMIOProxy to format the device path of
VirtIOMMIOProxy, as a path prefix. (This is identical to what
virtio_bus_get_dev_path() does.)
(2) Append the base address of VirtIOMMIOProxy to the device path, such
as:
- virtio-mmio@000000000a003e00,
- virtio-mmio@000000000a003c00.
Given that these device paths are placed in the migration stream, step (2)
above, if done unconditionally, would break migration. So make that step
conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7
machine types and later.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Kevin Zhao <kevin.zhao@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Tom Hanson <thomas.hanson@linaro.org>
Reported-by: Kevin Zhao <kevin.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1467739394-28357-1-git-send-email-lersek@redhat.com
Fixes: https://bugs.launchpad.net/qemu/+bug/1594239
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert to the new interface.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
For virtio-1 devices, we allow a more complex queue layout that doesn't
require descriptor table and rings on a physically-contigous memory area:
add virtio_queue_set_rings() to allow transports to set this up.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
set_host_notifier and set_guest_notifiers supported by virtio-mmio now.
Most code copied from virtio-pci.
This makes it possible to use vhost-net with virtio-mmio,
improving performance by about 30%.
The kvm-arm does not yet support irqfd, need to fix the hard-coded part after
kvm-arm gets irqfd support.
Signed-off-by: Ying-Shiuan Pan <yingshiuan.pan@gmail.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic.
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nearly all transports have been offering VIRTIO_F_NOTIFY_ON_EMPTY,
s390-virtio being the exception. There's no reason why it shouldn't
offer it as well, though (handling is done in core anyway), so let's
move it to the common virtio features.
While we're changing it anyway, fix the indentation for the
DEFINE_VIRTIO_COMMON_FEATURES macro.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move host_features from the individual transport proxies into
the virtio device. Transports may continue to add feature bits
during device plugging.
This should it make easier to offer different sets of host features
for virtio-1/transitional support.
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtio_{add,clear}_feature helper functions for manipulating a
feature bits variable. This has some benefits over open coding:
- add check that the bit is in a sane range
- make it obvious at a glance what is going on
- have a central point to change when we want to extend feature bits
Convert existing code manipulating features to use the new helpers.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Bus by default is not hotpluggable.
virtio-mmio-bus and its parent types do not set allow_hotplug
anywhere explicitly, so remove not needed field access
and wrapper along with it.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Both 'indirect_desc' and 'event_idx' are bus independent features,
and they should be enabled for mmio devices too.
On arm64 quad core VM(qemu-kvm), the patch can increase block I/O
performance a lot with latest linux tree:
- without the patch: 14K IOPS
- with the patch: 34K IOPS
fio script:
[global]
direct=1
bsrange=4k-4k
timeout=10
numjobs=4
ioengine=libaio
iodepth=64
filename=/dev/vdc
group_reporting=1
[f1]
rw=randread
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vdev field is complicated to synchronize. Just access the
BusState's list of children.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
The virtio-mmio spec says that QueueNumMax must read zero for queues
which are unavailable; implement this, rather than always returning
VIRTQUEUE_MAX_SIZE.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1374853288-9912-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add support for the generic MMIO based virtio transport.
This patch includes some fixes for bugs spotted by
Ying-Shiuan Pan <yspan@itri.org.tw>.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1373977512-28932-6-git-send-email-peter.maydell@linaro.org
[Fred changes: updated to new virtio-bus mechanisms]
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
[PMM changes:
* fixed trivial makefile conflict
* removed unused int_enable
* host_features doesn't need migrating
* reset guest accessible state in the reset function
* minor style fixes like extra blank lines
* RAZ/WI if there's no backend
* made transport size 0x200, in line with kvmtool
* set has_variable_vring_alignment
]
